added boot script files to repository

1 files changed, 0 insertions, 699 deletions

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
deleted file mode 100644
index ea3056b..0000000
--- a/include/configs/MPC837XERDB.h
+++ /dev/null
@@ -1,699 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- * Kevin Lam <kevin.lam@freescale.com>
- * Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1 /* E300 family */
-#define CONFIG_MPC83xx		1 /* MPC83xx family */
-#define CONFIG_MPC837x		1 /* MPC837x CPU specific */
-#define CONFIG_MPC837XERDB	1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define CONFIG_PCI	1
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
-#define CONFIG_HWCONFIG
-
-/*
- * On-board devices
- */
-#define CONFIG_TSEC_ENET		/* TSEC Ethernet support */
-#define CONFIG_VSC7385_ENET
-
-/*
- * System Clock Setup
- */
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_83XX_PCICLK	66666667 /* in HZ */
-#else
-#define CONFIG_83XX_CLKIN	66666667 /* in Hz */
-#define CONFIG_PCIE
-#endif
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
-#endif
-
-/*
- * Hardware Reset Configuration Word
- */
-#define CONFIG_SYS_HRCW_LOW (\
-	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-	HRCWL_DDR_TO_SCB_CLK_1X1 |\
-	HRCWL_SVCOD_DIV_2 |\
-	HRCWL_CSB_TO_CLKIN_5X1 |\
-	HRCWL_CORE_TO_CSB_2X1)
-
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_SYS_HRCW_HIGH (\
-	HRCWH_PCI_AGENT |\
-	HRCWH_PCI1_ARBITER_DISABLE |\
-	HRCWH_CORE_ENABLE |\
-	HRCWH_FROM_0XFFF00100 |\
-	HRCWH_BOOTSEQ_DISABLE |\
-	HRCWH_SW_WATCHDOG_DISABLE |\
-	HRCWH_ROM_LOC_LOCAL_16BIT |\
-	HRCWH_RL_EXT_LEGACY |\
-	HRCWH_TSEC1M_IN_RGMII |\
-	HRCWH_TSEC2M_IN_RGMII |\
-	HRCWH_BIG_ENDIAN |\
-	HRCWH_LDP_CLEAR)
-#else
-#define CONFIG_SYS_HRCW_HIGH (\
-	HRCWH_PCI_HOST |\
-	HRCWH_PCI1_ARBITER_ENABLE |\
-	HRCWH_CORE_ENABLE |\
-	HRCWH_FROM_0X00000100 |\
-	HRCWH_BOOTSEQ_DISABLE |\
-	HRCWH_SW_WATCHDOG_DISABLE |\
-	HRCWH_ROM_LOC_LOCAL_16BIT |\
-	HRCWH_RL_EXT_LEGACY |\
-	HRCWH_TSEC1M_IN_RGMII |\
-	HRCWH_TSEC2M_IN_RGMII |\
-	HRCWH_BIG_ENDIAN |\
-	HRCWH_LDP_CLEAR)
-#endif
-
-/* System performance - define the value i.e. CONFIG_SYS_XXX
-*/
-
-/* Arbiter Configuration Register */
-#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
-
-/* System Priority Control Regsiter */
-#define CONFIG_SYS_SPCR_TSECEP		3	/* eTSEC1&2 emergency priority (0-3) */
-
-/* System Clock Configuration Register */
-#define CONFIG_SYS_SCCR_TSEC1CM	1		/* eTSEC1 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_TSEC2CM	1		/* eTSEC2 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_SATACM		SCCR_SATACM_2	/* SATA1-4 clock mode (0-3) */
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRH		0x08200000
-#define CONFIG_SYS_SICRL		0x00000000
-
-/*
- * Output Buffer Impedance
- */
-#define CONFIG_SYS_OBIR		0x30100000
-
-/*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR		0xE0000000
-
-/*
- * Device configurations
- */
-
-/* Vitesse 7385 */
-
-#ifdef CONFIG_VSC7385_ENET
-
-#define CONFIG_TSEC2
-
-/* The flash address and size of the VSC7385 firmware image */
-#define CONFIG_VSC7385_IMAGE		0xFE7FE000
-#define CONFIG_VSC7385_IMAGE_SIZE	8192
-
-#endif
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	0x03000000
-#define CONFIG_SYS_83XX_DDR_USES_CS0
-
-#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
-
-#undef CONFIG_DDR_ECC		/* support DDR ECC function */
-#undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
-
-#undef CONFIG_NEVER_ASSERT_ODT_TO_CPU	/* Never assert ODT to internal IOs */
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE		256		/* MB */
-#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
-#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \
-				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
-
-#define CONFIG_SYS_DDR_TIMING_3	0x00000000
-#define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
-				| (0 << TIMING_CFG0_WRT_SHIFT) \
-				| (0 << TIMING_CFG0_RRT_SHIFT) \
-				| (0 << TIMING_CFG0_WWT_SHIFT) \
-				| (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
-				| (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
-				| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
-				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
-				/* 0x00220802 */
-				/* 0x00260802 */ /* DDR400 */
-#define CONFIG_SYS_DDR_TIMING_1	((3 << TIMING_CFG1_PRETOACT_SHIFT) \
-				| (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
-				| (3 << TIMING_CFG1_ACTTORW_SHIFT) \
-				| (7 << TIMING_CFG1_CASLAT_SHIFT) \
-				| (13 << TIMING_CFG1_REFREC_SHIFT) \
-				| (3 << TIMING_CFG1_WRREC_SHIFT) \
-				| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
-				| (2 << TIMING_CFG1_WRTORD_SHIFT))
-				/* 0x3935d322 */
-				/* 0x3937d322 */
-#define CONFIG_SYS_DDR_TIMING_2	0x02984cc8
-
-#define CONFIG_SYS_DDR_INTERVAL	((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \
-				| (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
-				/* 0x06090100 */
-
-#if defined(CONFIG_DDR_2T_TIMING)
-#define CONFIG_SYS_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
-				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
-				| SDRAM_CFG_2T_EN \
-				| SDRAM_CFG_DBW_32)
-#else
-#define CONFIG_SYS_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
-				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT)
-				/* 0x43000000 */
-#endif
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE		((0x0406 << SDRAM_MODE_ESD_SHIFT) \
-				| (0x0442 << SDRAM_MODE_SD_SHIFT))
-				/* 0x04400442 */ /* DDR400 */
-#define CONFIG_SYS_DDR_MODE2		0x00000000
-
-/*
- * Memory test
- */
-#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00040000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x0ef70010
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef	CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
-#define CONFIG_SYS_LBC_LBCR		0x00000000
-#define CONFIG_FSL_ELBC		1
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE		8 /* max FLASH size is 32M */
-
-#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
-#define CONFIG_SYS_FLASH_EMPTY_INFO			/* display empty sectors */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
-
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
-#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | /* Flash Base address */ \
-				(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
-				BR_V) /* valid */
-#define CONFIG_SYS_OR0_PRELIM		(0xFF800000		/* 8 MByte */ \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_9 \
-				| OR_GPCM_EHTR \
-				| OR_GPCM_EAD)
-				/* 0xFF806FF7	TODO SLOW 8 MB flash size */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-/*
- * NAND Flash on the Local Bus
- */
-#define CONFIG_SYS_NAND_BASE		0xE0600000	/* 0xE0600000 */
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_NAND_BASE | \
-				 (2 << BR_DECC_SHIFT) |	/* Use HW ECC */ \
-				 BR_PS_8 |		/* Port Size = 8 bit */ \
-				 BR_MS_FCM |		/* MSEL = FCM */ \
-				 BR_V)			/* valid */
-#define CONFIG_SYS_OR1_PRELIM		(0xFFFF8000 |		/* length 32K */ \
-				 OR_FCM_CSCT | \
-				 OR_FCM_CST | \
-				 OR_FCM_CHT | \
-				 OR_FCM_SCY_1 | \
-				 OR_FCM_TRLX | \
-				 OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
-#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
-
-/* Vitesse 7385 */
-
-#define CONFIG_SYS_VSC7385_BASE	0xF0000000
-
-#ifdef CONFIG_VSC7385_ENET
-
-#define CONFIG_SYS_BR2_PRELIM		0xf0000801		/* Base address */
-#define CONFIG_SYS_OR2_PRELIM		0xfffe09ff		/* 128K bytes*/
-#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_VSC7385_BASE	/* Access Base */
-#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010		/* Access Size 128K */
-
-#endif
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
-
-/* SERDES */
-#define CONFIG_FSL_SERDES
-#define CONFIG_FSL_SERDES1	0xe3000
-#define CONFIG_FSL_SERDES2	0xe3100
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
-/* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-
-/*
- * Config on-board RTC
- */
-#define CONFIG_RTC_DS1374	/* use ds1374 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
-#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
-#define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
-#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
-
-#define CONFIG_SYS_PCIE1_BASE		0xA0000000
-#define CONFIG_SYS_PCIE1_CFG_BASE	0xA0000000
-#define CONFIG_SYS_PCIE1_CFG_SIZE	0x08000000
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xA8000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA8000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xB8000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000
-
-#define CONFIG_SYS_PCIE2_BASE		0xC0000000
-#define CONFIG_SYS_PCIE2_CFG_BASE	0xC0000000
-#define CONFIG_SYS_PCIE2_CFG_SIZE	0x08000000
-#define CONFIG_SYS_PCIE2_MEM_BASE	0xC8000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xC8000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xD8000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
-
-#ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
-#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
-#endif	/* CONFIG_PCI */
-
-/*
- * TSEC
- */
-#ifdef CONFIG_TSEC_ENET
-
-#define CONFIG_NET_MULTI
-#define CONFIG_GMII			/* MII PHY management */
-
-#define CONFIG_TSEC1
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME		"TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET		0x24000
-#define TSEC1_PHY_ADDR			2
-#define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC1_PHYIDX			0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME		"TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET		0x25000
-#define TSEC2_PHY_ADDR			0x1c
-#define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_PHYIDX			0
-#endif
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME			"TSEC0"
-
-#endif
-
-/*
- * SATA
- */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1_OFFSET	0x18000
-#define CONFIG_SYS_SATA1		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2_OFFSET	0x19000
-#define CONFIG_SYS_SATA2		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
-
-#ifdef CONFIG_FSL_SATA
-#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#endif
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-	#define CONFIG_ENV_IS_IN_FLASH	1
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
-	#define CONFIG_ENV_SECT_SIZE	0x10000	/* 64K (one sector) for env */
-	#define CONFIG_ENV_SIZE		0x4000
-#else
-	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-0x1000)
-	#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_LOADS
-#endif
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-
-#undef CONFIG_WATCHDOG		/* watchdog disabled */
-
-#define CONFIG_MMC     1
-
-#ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_ESDHC_PIN_MUX
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
-
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(256 << 20) /* Initial Memory map for Linux */
-
-/*
- * Core HID Setup
- */
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
-				 HID0_ENABLE_INSTRUCTION_CACHE)
-#define CONFIG_SYS_HID2		HID2_HBE
-
-/*
- * MMU Setup
- */
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* DDR: cache cacheable */
-#define CONFIG_SYS_SDRAM_LOWER		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_UPPER		(CONFIG_SYS_SDRAM_BASE + 0x10000000)
-
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-
-/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-
-/* L2 Switch: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_VSC7385_BASE | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-
-/* Stack in dcache: cacheable, no memory coherence */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-
-#ifdef CONFIG_PCI
-/* PCI MEM space: cacheable */
-#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-/* PCI MMIO space: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-#else
-#define CONFIG_SYS_IBAT6L	(0)
-#define CONFIG_SYS_IBAT6U	(0)
-#define CONFIG_SYS_IBAT7L	(0)
-#define CONFIG_SYS_IBAT7U	(0)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_HAS_FSL_DR_USB
-
-#define CONFIG_NETDEV		eth1
-
-#define CONFIG_HOSTNAME		mpc837x_rdb
-#define CONFIG_ROOTPATH		/nfsroot
-#define CONFIG_RAMDISKFILE	rootfs.ext2.gz.uboot
-#define CONFIG_BOOTFILE		uImage
-#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
-#define CONFIG_FDTFILE		mpc8379_rdb.dtb
-
-#define CONFIG_LOADADDR		800000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
-#define CONFIG_BAUDRATE		115200
-
-#define XMK_STR(x)	#x
-#define MK_STR(x)	XMK_STR(x)
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
-	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
-	"tftpflash=tftp $loadaddr $uboot;"				\
-		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
-	"fdtaddr=780000\0"						\
-	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
-	"ramdiskaddr=1000000\0"						\
-	"ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0"			\
-	"console=ttyS0\0"						\
-	"setbootargs=setenv bootargs "					\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv rootdev /dev/nfs;"					\
-	"run setbootargs;"						\
-	"run setipargs;"						\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv rootdev /dev/ram;"					\
-	"run setbootargs;"						\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#undef MK_STR
-#undef XMK_STR
-
-#endif	/* __CONFIG_H */