added boot script files to repository

1 files changed, 0 insertions, 765 deletions

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
deleted file mode 100644
index 3154e13..0000000
--- a/include/configs/TQM5200.h
+++ /dev/null
@@ -1,765 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004-2006
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
-#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
-#define CONFIG_TQM5200		1	/* ... on TQM5200 module		*/
-#undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules	*/
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000	boot low (standard configuration with room for
- *		max 64 MByte Flash ROM)
- * 0xFFF00000	boot high (for a backup copy of U-Boot)
- * 0x00100000	boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFC000000
-#endif
-
-/* On a Cameron or on a FO300 board or ...				*/
-#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \
-	&& !defined(CONFIG_FO300)
-#define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
-#endif
-
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CONFIG_BOOTCOUNT_LIMIT	1
-
-#ifdef CONFIG_FO300
-#define CONFIG_SYS_DEVICE_NULLDEV		1	/* enable null device */
-#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* used to detect S1 switch position */
-#define CONFIG_USB_BIN_FIXUP		1	/* for a buggy USB device */
-#if 0
-#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED	1	/* silent console on PSC1 when S1 */
-							/* switch is closed */
-#endif
-
-#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED		/* silent console on PSC1 when S1 */
-							/* switch is open */
-#endif	/* CONFIG_FO300 */
-
-#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
-#define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
-#define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
-#define CONFIG_PS2SERIAL	6	/* .. on PSC6			*/
-#define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
-#define CONFIG_BOARD_EARLY_INIT_R
-#endif /* CONFIG_STK52XX */
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1
-/* #define CONFIG_PCI_SCAN_SHOW	1 */
-
-#define CONFIG_PCI_MEM_BUS	0x40000000
-#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE	0x10000000
-
-#define CONFIG_PCI_IO_BUS	0x50000000
-#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE	0x01000000
-
-#define CONFIG_NET_MULTI	1
-#define CONFIG_EEPRO100		1
-#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
-#define CONFIG_NS8382X		1
-#endif	/* CONFIG_STK52XX */
-
-/*
- * Video console
- */
-#ifndef CONFIG_TQM5200S		/* No graphics controller on TQM5200S */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_SM501
-#define CONFIG_VIDEO_SM501_32BPP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-
-#ifndef CONFIG_FO300
-#define CONFIG_CONSOLE_EXTRA_INFO
-#else
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#endif /* #ifndef CONFIG_TQM5200S */
-
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-/* USB */
-#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
-    defined(CONFIG_STK52XX)
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	MPC5XXX_USB
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"mpc5200"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
-
-#endif
-
-#ifndef CONFIG_CAM5200
-/* POST support */
-#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
-				 CONFIG_SYS_POST_CPU	   | \
-				 CONFIG_SYS_POST_I2C)
-#endif
-
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_BSP
-
-#ifdef CONFIG_VIDEO
-    #define CONFIG_CMD_BMP
-#endif
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
-#endif
-
-#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
-	defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
-    #define CONFIG_CMD_IDE
-    #define CONFIG_CMD_FAT
-    #define CONFIG_CMD_EXT2
-#endif
-
-#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
-	defined(CONFIG_STK52XX)
-    #define CONFIG_CFG_USB
-    #define CONFIG_CFG_FAT
-#endif
-
-#ifdef CONFIG_POST
-    #define CONFIG_CMD_DIAG
-#endif
-
-
-#define	CONFIG_TIMESTAMP		/* display image timestamps */
-
-#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
-#   define CONFIG_SYS_LOWBOOT		1	/* Boot low */
-#endif
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-#define CONFIG_PREBOOT	"echo;" \
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT)
-# define ENV_UPDT							\
-	"update=protect off FFF00000 +${filesize};"			\
-		"erase FFF00000 +${filesize};"				\
-		"cp.b 200000 FFF00000 ${filesize};"			\
-		"protect on FFF00000 +${filesize}\0"
-#else	/* default lowboot configuration */
-#   define ENV_UPDT							\
-	"update=protect off FC000000 +${filesize};"			\
-		"erase FC000000 +${filesize};"				\
-		"cp.b 200000 FC000000 ${filesize};"			\
-		"protect on FC000000 +${filesize}\0"
-#endif
-
-#if defined(CONFIG_TQM5200)
-#define CUSTOM_ENV_SETTINGS						\
-	"hostname=tqm5200\0"						\
-	"bootfile=/tftpboot/tqm5200/uImage\0"				\
-	"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0"			\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
-#elif defined(CONFIG_CAM5200)
-#define CUSTOM_ENV_SETTINGS						\
-	"bootfile=cam5200/uImage\0"					\
-	"u-boot=cam5200/u-boot.bin\0"					\
-	"setup=tftp 200000 cam5200/setup.img; source 200000\0"
-#endif
-
-#if defined(CONFIG_TQM5200_B)
-#define ENV_FLASH_LAYOUT						\
-	"fdt_addr=FC100000\0"						\
-	"kernel_addr=FC140000\0"					\
-	"ramdisk_addr=FC600000\0"
-#elif defined(CONFIG_CHARON)
-#define ENV_FLASH_LAYOUT						\
-	"fdt_addr=FDFC0000\0"						\
-	"kernel_addr=FC0A0000\0"					\
-	"ramdisk_addr=FC200000\0"
-#else	/* !CONFIG_TQM5200_B */
-#define ENV_FLASH_LAYOUT						\
-	"fdt_addr=FC0A0000\0"						\
-	"kernel_addr=FC0C0000\0"					\
-	"ramdisk_addr=FC300000\0"
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"console=ttyPSC0\0"						\
-	ENV_FLASH_LAYOUT						\
-	"kernel_addr_r=400000\0"					\
-	"fdt_addr_r=600000\0"						\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addcons=setenv bootargs ${bootargs} "				\
-		"console=${console},${baudrate}\0"			\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"flash_self_old=sete console ttyS0; "				\
-		"run ramargs addip addcons addmtd; "			\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_self=run ramargs addip addcons;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;"	\
-		"bootm ${kernel_addr}\0"				\
-	"flash_nfs=run nfsargs addip addcons;"				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
-		"sete console ttyS0; run nfsargs addip addcons;bootm\0"	\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"tftp ${fdt_addr_r} ${fdt_file}; "			\
-		"run nfsargs addip addcons addmtd; "			\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	CUSTOM_ENV_SETTINGS						\
-	"load=tftp 200000 ${u-boot}\0"					\
-	ENV_UPDT							\
-	""
-
-#define CONFIG_BOOTCOMMAND	"run net_nfs"
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
-/*
- * PCI Bus clocking configuration
- *
- * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
- * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
- */
-#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
-#endif
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#ifdef CONFIG_TQM5200_REV100
-#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
-#else
-#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
-#endif
-
-/*
- * I2C clock frequency
- *
- * Please notice, that the resulting clock frequency could differ from the
- * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
- * approximation allways lies below the configured value, never above.
- */
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
- * also). For other EEPROMs configuration should be verified. On Mini-FAP the
- * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
- * same configuration could be used.
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
-
-/*
- * HW-Monitor configuration on Mini-FAP
- */
-#if defined (CONFIG_MINIFAP)
-#define CONFIG_SYS_I2C_HWMON_ADDR		0x2C
-#endif
-
-/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_MINIFAP)
-#undef CONFIG_SYS_POST_I2C_ADDRS
-#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
-					 CONFIG_SYS_I2C_HWMON_ADDR,	\
-					 CONFIG_SYS_I2C_SLAVE}
-#endif
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_BASE		0xFC000000
-
-#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks
-					   (= chip selects) */
-#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned int /* main flash device with */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_ADDR0		0x555
-#define CONFIG_SYS_FLASH_ADDR1		0x2AA
-#define CONFIG_SYS_FLASH_2ND_16BIT_DEV	1	/* NIOS flash is a 16bit device */
-#define CONFIG_SYS_MAX_FLASH_SECT	128
-#else
-/* use CFI flash driver */
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CONFIG_FLASH_CFI_MTD		/* with MTD support */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
-					   (= chip selects) */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-
-#if defined (CONFIG_CAM5200)
-# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
-#elif defined(CONFIG_TQM5200_B)
-# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00080000)
-#else
-# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
-#endif
-
-/* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nor0=fc000000.flash"
-
-#if defined(CONFIG_STK52XX)
-# if defined(CONFIG_TQM5200_B)
-#  if defined(CONFIG_SYS_LOWBOOT)
-#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:1m(firmware),"	\
-						"256k(dtb),"		\
-						"2304k(kernel),"	\
-						"2560k(small-fs),"	\
-						"2m(initrd),"		\
-						"8m(misc),"		\
-						"16m(big-fs)"
-#  else	/* highboot */
-#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:2560k(kernel),"\
-						"3584k(small-fs),"	\
-						"2m(initrd),"		\
-						"8m(misc),"		\
-						"15m(big-fs),"		\
-						"1m(firmware)"
-#  endif /* CONFIG_SYS_LOWBOOT */
-# else	/* !CONFIG_TQM5200_B */
-#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:640k(firmware),"\
-						"128k(dtb),"		\
-						"2304k(kernel),"	\
-						"2m(initrd),"		\
-						"4m(small-fs),"		\
-						"8m(misc),"		\
-						"15m(big-fs)"
-# endif /* CONFIG_TQM5200_B */
-#elif defined (CONFIG_CAM5200)
-#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:768k(firmware),"\
-						"1792k(kernel),"	\
-						"5632k(rootfs),"	\
-						"24m(home)"
-#elif defined (CONFIG_CHARON)
-#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:640k(firmware),"\
-						"1408k(kernel),"	\
-						"2m(initrd),"		\
-						"4m(small-fs),"		\
-						"24320k(big-fs),"	\
-						"256k(dts)"
-#elif defined (CONFIG_FO300)
-#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:640k(firmware),"\
-						"1408k(kernel),"	\
-						"2m(initrd),"		\
-						"4m(small-fs),"		\
-						"8m(misc),"		\
-						"16m(big-fs)"
-#else
-# error "Unknown Carrier Board"
-#endif	/* CONFIG_STK52XX */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x4000	/* 16 k - keep small for fast booting */
-#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
-#define CONFIG_ENV_SECT_SIZE	0x40000
-#else
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#endif /* CONFIG_TQM5200_B */
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-
-/* Use ON-Chip SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_POST_SIZE
-#else
-#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
-#endif
-
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#if defined (CONFIG_CAM5200)
-# define CONFIG_SYS_MONITOR_LEN	(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#elif defined(CONFIG_TQM5200_B)
-# define CONFIG_SYS_MONITOR_LEN	(512 << 10)	/* Reserve 512 kB for Monitor	*/
-#else
-# define CONFIG_SYS_MONITOR_LEN	(384 << 10)	/* Reserve 384 kB for Monitor	*/
-#endif
-
-#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC	1
-#define CONFIG_MPC5xxx_FEC_MII100
-/*
- * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
- */
-/* #define CONFIG_MPC5xxx_FEC_MII10 */
-#define CONFIG_PHY_ADDR		0x00
-
-/*
- * GPIO configuration
- *
- * use CS1: Bit 0 (mask: 0x80000000):
- *	   1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1).
- * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
- *	  00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
- *		SPI on PSC3 according to PSC3 setting. Use for CAM5200.
- *	  01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- *		Use for REV200 STK52XX boards and FO300 boards. Do not use
- *		with REV100 modules (because, there I2C1 is used as I2C bus).
- * use ATA: Bits 6-7 (mask 0x03000000):
- *	  00 -> No ATA chip selects, csb_4/5 used as normal chip selects.
- *		Use for CAM5200 board.
- *	  01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards.
- * use PSC6: Bits 9-11 (mask 0x00700000):
- *	 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as
- *		UART, CODEC or IrDA.
- *		GPIO on PSC6_3 is used in post_hotkeys_pressed() to
- *		enable extended POST tests.
- *		Use for MINI-FAP and TQM5200_IB boards.
- *	 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used.
- *		Extended POST test is not available.
- *		Use for STK52xx, FO300 and CAM5200 boards.
- *		WARNING: When the extended POST is enabled, these bits will
- *			 be overridden by this code as GPIOs!
- * use PCI_DIS: Bit 16 (mask 0x00008000):
- *	   1 -> disable PCI controller (on CAM5200 board).
- * use USB: Bits 18-19 (mask 0x00003000):
- *	  10 -> two UARTs (on FO300 and CAM5200).
- * use PSC3: Bits 20-23 (mask: 0x00000f00):
- *	0000 -> All PSC3 pins are GPIOs.
- *	1100 -> UART/SPI (on FO300 board).
- *	0100 -> UART (on CAM5200 board).
- * use PSC2: Bits 25:27 (mask: 0x00000030):
- *	 000 -> All PSC2 pins are GPIOs.
- *	 100 -> UART (on CAM5200 board).
- *	 001 -> CAN1/2 on PSC2 pins.
- *		Use for REV100 STK52xx boards
- *	 01x -> Use AC97 (on FO300 board).
- * use PSC1: Bits 29-31 (mask: 0x00000007):
- *	 100 -> UART (on all boards).
- */
-#if !defined(CONFIG_SYS_GPS_PORT_CONFIG)
-#if defined (CONFIG_MINIFAP)
-# define CONFIG_SYS_GPS_PORT_CONFIG	0x91000004
-#elif defined (CONFIG_STK52XX)
-# if defined (CONFIG_STK52XX_REV100)
-#  define CONFIG_SYS_GPS_PORT_CONFIG	0x81500014
-# else /* STK52xx REV200 and above */
-#  if defined (CONFIG_TQM5200_REV100)
-#   error TQM5200 REV100 not supported on STK52XX REV200 or above
-#  else/* TQM5200 REV200 and above */
-#   define CONFIG_SYS_GPS_PORT_CONFIG	0x91500404
-#  endif
-# endif
-#elif defined (CONFIG_FO300)
-# define CONFIG_SYS_GPS_PORT_CONFIG	0x91502c24
-#elif defined (CONFIG_CAM5200)
-# define CONFIG_SYS_GPS_PORT_CONFIG	0x8050A444
-#else  /* TMQ5200 Inbetriebnahme-Board */
-# define CONFIG_SYS_GPS_PORT_CONFIG	0x81000004
-#endif
-#endif
-
-/*
- * RTC configuration
- */
-#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
-# define CONFIG_RTC_M41T11 1
-# define CONFIG_SYS_I2C_RTC_ADDR 0x68
-# define CONFIG_SYS_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
-					   year */
-#else
-# define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-/* Enable an alternate, more extensive memory test */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
-/*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
-#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
-#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
-#else
-#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
-#endif
-#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
-
-#define CONFIG_LAST_STAGE_INIT
-
-/*
- * SRAM - Do not map below 2 GB in address space, because this area is used
- * for SDRAM autosizing.
- */
-#define CONFIG_SYS_CS2_START		0xE5000000
-#define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
-#define CONFIG_SYS_CS2_CFG		0x0004D930
-
-/*
- * Grafic controller - Do not map below 2 GB in address space, because this
- * area is used for SDRAM autosizing.
- */
-#define SM501_FB_BASE		0xE0000000
-#define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
-#define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
-#define CONFIG_SYS_CS1_CFG		0x8F48FF70
-#define SM501_MMIO_BASE		CONFIG_SYS_CS1_START + 0x03E00000
-
-#define CONFIG_SYS_CS_BURST		0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
-
-#if defined(CONFIG_CAM5200)
-#define CONFIG_SYS_CS4_START		0xB0000000
-#define CONFIG_SYS_CS4_SIZE		0x00010000
-#define CONFIG_SYS_CS4_CFG		0x01019C10
-
-#define CONFIG_SYS_CS5_START		0xD0000000
-#define CONFIG_SYS_CS5_SIZE		0x01208000
-#define CONFIG_SYS_CS5_CFG		0x1414BF10
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS	0xff000000
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00001000
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
- */
-
-#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-
-#define CONFIG_IDE_RESET		/* reset for ide supported	*/
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
-
-/* Interval between registers */
-#define CONFIG_SYS_ATA_STRIDE		4
-
-/* Support ATAPI devices */
-#define CONFIG_ATAPI			1
-
-/*-----------------------------------------------------------------------
- * Open firmware flat tree support
- *-----------------------------------------------------------------------
- */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,5200@0"
-#define OF_SOC			"soc5200@f0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
-
-#endif /* __CONFIG_H */