added boot script files to repository

6 files changed, 930 insertions, 0 deletions

diff --git a/u-boot/board/dbau1x00/Makefile b/u-boot/board/dbau1x00/Makefile
new file mode 100644
index 0000000..e36a9d2
--- /dev/null
+++ b/u-boot/board/dbau1x00/Makefile
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	= $(BOARD).o
+SOBJS	= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/u-boot/board/dbau1x00/README b/u-boot/board/dbau1x00/README
new file mode 100644
index 0000000..b1e9494
--- /dev/null
+++ b/u-boot/board/dbau1x00/README
@@ -0,0 +1,63 @@
+By Thomas.Lange@corelatus.se 2004-Oct-05
+----------------------------------------
+DbAu1xx0 are development boards from AMD containing
+an Alchemy AU1xx0 series cpu with mips32 core.
+Existing cpu:s are Au1000, Au1100, Au1500 and Au1550
+
+Limitations & comments
+----------------------
+Support was originally big endian only.
+I have not tested, but several u-boot users report working
+configurations in little endian mode.
+
+I named the board dbau1x00, to allow
+support for all three development boards
+( dbau1000, dbau1100 and dbau1500 ).
+Now there is a new board called dbau1550 also, which
+should be supported RSN.
+
+I only have a dbau1000, so my testing is limited
+to this board.
+
+The board has two different flash banks, that can
+be selected via dip switch. This makes it possible
+to test new bootloaders without thrashing the YAMON
+boot loader delivered with board.
+
+NOTE! When you switch between the two boot flashes, the
+base addresses will be swapped.
+Have this in mind when you compile u-boot. CONFIG_SYS_TEXT_BASE has
+to match the address where u-boot is located when you
+actually launch.
+
+Ethernet only supported for mac0.
+
+PCMCIA only supported for slot 0, only 3.3V.
+
+PCMCIA IDE tested with Sandisk Compact Flash and
+IBM microdrive.
+
+###################################
+########     NOTE!!!!!!   #########
+###################################
+If you partition a disk on another system (e.g. laptop),
+all bytes will be swapped on 16bit level when using
+PCMCIA and running cpu in big endian mode!!!!
+
+This is probably due to an error in Au1000 chip.
+
+Solution:
+
+a) Boot via network and partition disk directly from
+dbau1x00. The endian will then be correct.
+
+b) Partition disk on "laptop" and fill it with all files
+you need. Then write a simple program that endian swaps
+whole disk,
+
+Example:
+Original "laptop" byte order:
+B0 B1 B2 B3 B4 B5 B6 B7 B8 B9...
+
+Dbau1000 byte order will then be:
+B1 B0 B3 B2 B5 B4 B7 B6 B9 B8...
diff --git a/u-boot/board/dbau1x00/config.mk b/u-boot/board/dbau1x00/config.mk
new file mode 100644
index 0000000..3516b42
--- /dev/null
+++ b/u-boot/board/dbau1x00/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMD development board AMD Alchemy DbAu1x00, MIPS32 core
+#
+
+# ROM version
+CONFIG_SYS_TEXT_BASE = 0xbfc00000
+
+# RAM version
+#CONFIG_SYS_TEXT_BASE = 0x80100000
diff --git a/u-boot/board/dbau1x00/dbau1x00.c b/u-boot/board/dbau1x00/dbau1x00.c
new file mode 100644
index 0000000..b3c6d51
--- /dev/null
+++ b/u-boot/board/dbau1x00/dbau1x00.c
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2003
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+
+phys_size_t initdram(int board_type)
+{
+	/* Sdram is setup by assembler code */
+	/* If memory could be changed, we should return the true value here */
+	return MEM_SIZE*1024*1024;
+}
+
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+
+/* In arch/mips/cpu/cpu.c */
+void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
+
+int checkboard (void)
+{
+#ifdef CONFIG_IDE_PCMCIA
+	u16 status;
+	volatile u32 *pcmcia_bcsr = (u32*)(DB1XX0_BCSR_ADDR+0x10);
+#endif	/* CONFIG_IDE_PCMCIA */
+	volatile u32 *phy = (u32*)(DB1XX0_BCSR_ADDR+0xC);
+	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
+	u32 proc_id;
+
+	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
+
+	proc_id = read_c0_prid();
+
+	switch (proc_id >> 24) {
+	case 0:
+		puts ("Board: Merlot (DbAu1000)\n");
+		printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	case 1:
+		puts ("Board: DbAu1500\n");
+		printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	case 2:
+		puts ("Board: DbAu1100\n");
+		printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	case 3:
+		puts ("Board: DbAu1550\n");
+		printf ("CPU: Au1550, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	default:
+		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
+	}
+
+	set_io_port_base(0);
+
+#ifdef CONFIG_IDE_PCMCIA
+	/* Enable 3.3 V on slot 0 ( VCC )
+	   No 5V */
+	status = 4;
+	*pcmcia_bcsr = status;
+
+	status |= BCSR_PCMCIA_PC0DRVEN;
+	*pcmcia_bcsr = status;
+	au_sync();
+
+	udelay(300*1000);
+
+	status |= BCSR_PCMCIA_PC0RST;
+	*pcmcia_bcsr = status;
+	au_sync();
+
+	udelay(100*1000);
+
+	/* PCMCIA is on a 36 bit physical address.
+	   We need to map it into a 32 bit addresses */
+
+#if 0
+	/* We dont need theese unless we run whole pcmcia package */
+	write_one_tlb(20,                 /* index */
+		      0x01ffe000,         /* Pagemask, 16 MB pages */
+		      CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */
+		      0x3C000017,         /* Lo0 */
+		      0x3C200017);        /* Lo1 */
+
+	write_one_tlb(21,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */
+		      0x3D000017,           /* Lo0 */
+		      0x3D200017);          /* Lo1 */
+#endif	/* 0 */
+	write_one_tlb(22,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CONFIG_SYS_PCMCIA_MEM_ADDR,  /* Hi */
+		      0x3E000017,           /* Lo0 */
+		      0x3E200017);          /* Lo1 */
+#endif	/* CONFIG_IDE_PCMCIA */
+
+	/* Release reset of ethernet PHY chips */
+	/* Always do this, because linux does not know about it */
+	*phy = 3;
+
+	return 0;
+}
diff --git a/u-boot/board/dbau1x00/lowlevel_init.S b/u-boot/board/dbau1x00/lowlevel_init.S
new file mode 100644
index 0000000..842fb76
--- /dev/null
+++ b/u-boot/board/dbau1x00/lowlevel_init.S
@@ -0,0 +1,589 @@
+/* Memory sub-system initialization code */
+
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+#define AU1500_SYS_ADDR		0xB1900000
+#define sys_endian		0x0038
+#define CP0_Config0		$16
+#define CPU_SCALE		((CONFIG_SYS_MHZ) / 12) /* CPU clock is a multiple of 12 MHz */
+#define MEM_1MS			((CONFIG_SYS_MHZ) * 1000)
+
+	.text
+	.set noreorder
+	.set mips32
+
+	.globl	lowlevel_init
+lowlevel_init:
+	/*
+	 * Step 1) Establish CPU endian mode.
+	 * Db1500-specific:
+	 * Switch S1.1 Off(bit7 reads 1) is Little Endian
+	 * Switch S1.1 On (bit7 reads 0) is Big Endian
+	 */
+#ifdef CONFIG_DBAU1550
+	li	t0, MEM_STCFG2
+	li	t1, 0x00000040
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME2
+	li	t1, 0x22080a20
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR2
+	li	t1, 0x10c03f00
+	sw	t1, 0(t0)
+#else
+	li	t0, MEM_STCFG1
+	li	t1, 0x00000080
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME1
+	li	t1, 0x22080a20
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR1
+	li	t1, 0x10c03f00
+	sw	t1, 0(t0)
+#endif
+
+	li	t0, DB1XX0_BCSR_ADDR
+	lw	t1,8(t0)
+	andi	t1,t1,0x80
+	beq	zero,t1,big_endian
+	nop
+little_endian:
+
+	/* Change Au1 core to little endian */
+	li	t0, AU1500_SYS_ADDR
+	li	t1, 1
+	sw	t1, sys_endian(t0)
+	mfc0	t2, CP0_CONFIG
+	mtc0	t2, CP0_CONFIG
+	nop
+	nop
+
+	/* Big Endian is default so nothing to do but fall through */
+
+big_endian:
+
+	/*
+	 * Step 2) Establish Status Register
+	 * (set BEV, clear ERL, clear EXL, clear IE)
+	 */
+	li	t1, 0x00400000
+	mtc0	t1, CP0_STATUS
+
+	/*
+	 * Step 3) Establish CP0 Config0
+	 * (set OD, set K0=3)
+	 */
+	li	t1, 0x00080003
+	mtc0	t1, CP0_CONFIG
+
+	/*
+	 * Step 4) Disable Watchpoint facilities
+	 */
+	li t1, 0x00000000
+	mtc0	t1, CP0_WATCHLO
+	mtc0	t1, CP0_IWATCHLO
+	/*
+	 * Step 5) Disable the performance counters
+	 */
+	mtc0	zero, CP0_PERFORMANCE
+	nop
+
+	/*
+	 * Step 6) Establish EJTAG Debug register
+	 */
+	mtc0	zero, CP0_DEBUG
+	nop
+
+	/*
+	 * Step 7) Establish Cause
+	 * (set IV bit)
+	 */
+	li	t1, 0x00800000
+	mtc0	t1, CP0_CAUSE
+
+	/* Establish Wired (and Random) */
+	mtc0	zero, CP0_WIRED
+	nop
+
+#ifdef CONFIG_DBAU1550
+	/* No workaround if running from ram */
+	lui	t0, 0xffc0
+	lui	t3, 0xbfc0
+	and	t1, ra, t0
+	bne	t1, t3, noCacheJump
+	nop
+
+	/*** From AMD YAMON ***/
+	/*
+	 * Step 8) Initialize the caches
+	 */
+	li		t0, (16*1024)
+	li		t1, 32
+	li		t2, 0x80000000
+	addu	t3, t0, t2
+cacheloop:
+	cache	0, 0(t2)
+	cache	1, 0(t2)
+	addu	t2, t1
+	bne		t2, t3, cacheloop
+	nop
+
+	/* Save return address */
+	move		t3, ra
+
+	/* Run from cacheable space now */
+	bal		cachehere
+	nop
+cachehere:
+	li		t1, ~0x20000000 /* convert to KSEG0 */
+	and		t0, ra, t1
+	addi	t0, 5*4			/* 5 insns beyond cachehere */
+	jr		t0
+	nop
+
+	/* Restore return address */
+	move		ra, t3
+
+	/*
+	 * Step 9) Initialize the TLB
+	 */
+	li		t0, 0			# index value
+	li		t1, 0x00000000		# entryhi value
+	li		t2, 32			# 32 entries
+
+tlbloop:
+	/* Probe TLB for matching EntryHi */
+	mtc0	t1, CP0_ENTRYHI
+	tlbp
+	nop
+
+	/* Examine Index[P], 1=no matching entry */
+	mfc0	t3, CP0_INDEX
+	li	t4, 0x80000000
+	and	t3, t4, t3
+	addiu	t1, t1, 1		# increment t1 (asid)
+	beq	zero, t3, tlbloop
+	nop
+
+	/* Initialize the TLB entry */
+	mtc0	t0, CP0_INDEX
+	mtc0	zero, CP0_ENTRYLO0
+	mtc0	zero, CP0_ENTRYLO1
+	mtc0	zero, CP0_PAGEMASK
+	tlbwi
+
+	/* Do it again */
+	addiu	t0, t0, 1
+	bne	t0, t2, tlbloop
+	nop
+
+#endif /* CONFIG_DBAU1550 */
+
+	/* First setup pll:s to make serial work ok */
+	/* We have a 12 MHz crystal */
+	li	t0, SYS_CPUPLL
+	li	t1, CPU_SCALE  /* CPU clock */
+	sw	t1, 0(t0)
+	sync
+	nop
+	nop
+
+	/* wait 1mS for clocks to settle */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+	/* Setup AUX PLL */
+	li	t0, SYS_AUXPLL
+	li	t1, 0x20 /* 96 MHz */
+	sw	t1, 0(t0) /* aux pll */
+	sync
+
+#ifdef CONFIG_DBAU1550
+	/*  Static memory controller */
+	/* RCE0 - can not change while fetching, do so from icache */
+	move		t2, ra /* Store return address */
+	bal		getAddr
+	nop
+
+getAddr:
+	move		t1, ra
+	move		ra, t2 /* Move return addess back */
+
+	cache	0x14,0(t1)
+	cache	0x14,32(t1)
+	/*** /From YAMON ***/
+
+noCacheJump:
+#endif /* CONFIG_DBAU1550 */
+
+#ifdef CONFIG_DBAU1550
+	li	t0, MEM_STTIME0
+	li	t1, 0x040181D7
+	sw	t1, 0(t0)
+
+	/* RCE0 AMD MirrorBit Flash (?) */
+	li	t0, MEM_STCFG0
+	li	t1, 0x00000003
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR0
+	li	t1, 0x11803E00
+	sw	t1, 0(t0)
+#else /* CONFIG_DBAU1550 */
+	li	t0, MEM_STTIME0
+	li	t1, 0x040181D7
+	sw	t1, 0(t0)
+
+	/* RCE0 AMD 29LV640M MirrorBit Flash */
+	li	t0, MEM_STCFG0
+	li	t1, 0x00000013
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR0
+	li	t1, 0x11E03F80
+	sw	t1, 0(t0)
+#endif /* CONFIG_DBAU1550 */
+
+	/* RCE1 CPLD Board Logic */
+	li	t0, MEM_STCFG1
+	li	t1, 0x00000080
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME1
+	li	t1, 0x22080a20
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR1
+	li	t1, 0x10c03f00
+	sw	t1, 0(t0)
+
+#ifdef CONFIG_DBAU1550
+	/* RCE2 CPLD Board Logic */
+	li	t0, MEM_STCFG2
+	li	t1, 0x00000040
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME2
+	li	t1, 0x22080a20
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR2
+	li	t1, 0x10c03f00
+	sw	t1, 0(t0)
+#else
+	li	t0, MEM_STCFG2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+#endif
+
+	/* RCE3 PCMCIA 250ns */
+	li	t0, MEM_STCFG3
+	li	t1, 0x00000002
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME3
+	li	t1, 0x280E3E07
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR3
+	li	t1, 0x10000000
+	sw	t1, 0(t0)
+
+	sync
+
+	/* Set peripherals to a known state */
+	li	t0, IC0_CFG0CLR
+	li	t1, 0xFFFFFFFF
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG0CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG1CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG2CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_SRCSET
+	sw	t1, 0(t0)
+
+	li	t0, IC0_ASSIGNSET
+	sw	t1, 0(t0)
+
+	li	t0, IC0_WAKECLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_RISINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_FALLINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_TESTBIT
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, IC1_CFG0CLR
+	li	t1, 0xFFFFFFFF
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG0CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG1CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG2CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_SRCSET
+	sw	t1, 0(t0)
+
+	li	t0, IC1_ASSIGNSET
+	sw	t1, 0(t0)
+
+	li	t0, IC1_WAKECLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_RISINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_FALLINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_TESTBIT
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, SYS_FREQCTRL0
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_FREQCTRL1
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_CLKSRC
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_PININPUTEN
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, 0xB1100100
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, 0xB1400100
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+
+	li	t0, SYS_WAKEMSK
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_WAKESRC
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	/* wait 1mS before setup */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+
+#ifdef CONFIG_DBAU1550
+/* SDCS 0,1,2 DDR SDRAM */
+	li	t0, MEM_SDMODE0
+	li	t1, 0x04276221
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE1
+	li	t1, 0x04276221
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE2
+	li	t1, 0x04276221
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR0
+	li	t1, 0xe21003f0
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR1
+	li	t1, 0xe21043f0
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR2
+	li	t1, 0xe21083f0
+	sw	t1, 0(t0)
+
+	sync
+
+	li	t0, MEM_SDCONFIGA
+	li	t1, 0x9030060a /* Program refresh - disabled */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDCONFIGB
+	li	t1, 0x00028000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDPRECMD /* Precharge all */
+	li	t1, 0
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD0
+	li	t1, 0x40000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD1
+	li	t1, 0x40000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD2
+	li	t1, 0x40000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD0
+	li	t1, 0x00000063
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD1
+	li	t1, 0x00000063
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD2
+	li	t1, 0x00000063
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDPRECMD /* Precharge all */
+	sw	zero, 0(t0)
+	sync
+
+	/* Issue 2 autoref */
+	li	t0, MEM_SDAUTOREF
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDAUTOREF
+	sw	zero, 0(t0)
+	sync
+
+	/* Enable refresh */
+	li	t0, MEM_SDCONFIGA
+	li	t1, 0x9830060a /* Program refresh - enabled */
+	sw	t1, 0(t0)
+	sync
+
+#else /* CONFIG_DBAU1550 */
+/* SDCS 0,1 SDRAM */
+	li	t0, MEM_SDMODE0
+	li	t1, 0x005522AA
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE1
+	li	t1, 0x005522AA
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR0
+	li	t1, 0x001003F8
+	sw	t1, 0(t0)
+
+
+	li	t0, MEM_SDADDR1
+	li	t1, 0x001023F8
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	sync
+
+	li	t0, MEM_SDREFCFG
+	li	t1, 0x64000C24 /* Disable */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDPRECMD
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDAUTOREF
+	sw	zero, 0(t0)
+	sync
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDREFCFG
+	li	t1, 0x66000C24 /* Enable */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD0
+	li	t1, 0x00000033
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD1
+	li	t1, 0x00000033
+	sw	t1, 0(t0)
+	sync
+
+#endif /* CONFIG_DBAU1550 */
+	/* wait 1mS after setup */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+
+	li	t0, SYS_PINFUNC
+	li	t1, 0x00008080
+	sw	t1, 0(t0)
+
+	li	t0, SYS_TRIOUTCLR
+	li	t1, 0x00001FFF
+	sw	t1, 0(t0)
+
+	li	t0, SYS_OUTPUTCLR
+	li	t1, 0x00008000
+	sw	t1, 0(t0)
+	sync
+
+	jr	ra
+	nop
diff --git a/u-boot/board/dbau1x00/u-boot.lds b/u-boot/board/dbau1x00/u-boot.lds
new file mode 100644
index 0000000..3c4fbe3
--- /dev/null
+++ b/u-boot/board/dbau1x00/u-boot.lds
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss (NOLOAD)  : { *(.sbss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
+	uboot_end = .;
+}