added boot script files to repository

12 files changed, 2748 insertions, 0 deletions

diff --git a/u-boot/board/mousse/Makefile b/u-boot/board/mousse/Makefile
new file mode 100644
index 0000000..346f779
--- /dev/null
+++ b/u-boot/board/mousse/Makefile
@@ -0,0 +1,44 @@
+
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	= $(BOARD).o m48t59y.o pci.o flash.o
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/u-boot/board/mousse/README b/u-boot/board/mousse/README
new file mode 100644
index 0000000..d5dda7a
--- /dev/null
+++ b/u-boot/board/mousse/README
@@ -0,0 +1,346 @@
+
+U-Boot for MOUSSE/MPC8240 (KAHLUA)
+----------------------------------
+James Dougherty (jfd@broadcom.com), 09/10/01
+
+The Broadcom/Vooha Mousse board is a 3U Compact PCI system board
+which uses the MPC8240, a 64MB SDRAM SIMM, and has onboard
+DEC 21143, NS16550 UART, an SGS M48T59Y TOD, and 4MB FLASH.
+See also: http://www.vooha.com/
+
+* NVRAM setenv/printenv/savenv supported.
+* Date Command
+* Serial Console support
+* Network support
+* FLASH of kernel images is supported.
+* FLASH of U-Boot to onboard and PLCC boot region.
+* Kernel command line options from NVRAM is supported.
+* IP PNP options supported.
+
+U-Boot Loading...
+
+
+U-Boot 1.0.5 (Sep 10 2001 - 00:22:25)
+
+CPU:   MPC8240 Revision 1.1 at 198 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)
+Built: Sep 10 2001 at 01:01:50
+MPLD:  Revision 127
+Local Bus:  33 MHz
+RTC:   M48T589 TOD/NVRAM (8176) bytes
+  Current date/time: 9/10/2001 0:18:52
+DRAM:  64 MB
+FLASH:  1.960 MB
+PCI:    scanning bus0 ...
+  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
+  00  00  00 1057  0003  060000 11  00000008 00000000 01   00
+  00  0d  00 1011  0019  020000 41  80000001 80000000 01   01
+  00  0e  00 105a  4d38  018000 01  a0000001 a0001001 01   03
+In:    serial
+Out:   serial
+Err:   serial
+
+Hit any key to stop autoboot:  0
+=>
+
+I. Root FileSystem/IP Configuration
+
+bootcmd=tftp 100000 vmlinux.img;bootm
+bootdelay=3
+baudrate=9600
+ipaddr=<IP ADDRESS>
+netmask=<NETMASK>
+hostname=<NAME>
+serverip=<NFS SERVER IP ADDRESS>
+ethaddr=00:00:10:20:30:44
+nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
+gateway=<IP ADDRESS>
+root=/dev/nfs
+stdin=serial
+stdout=serial
+stderr=serial
+
+NVRAM environment variables.
+
+use the command:
+
+setenv <attribute> <value>
+
+type "saveenv" to write to NVRAM.
+
+
+II. To boot from a hard drive:
+
+setenv root /dev/hda1
+
+
+III. IP options which configure the network:
+
+ipaddr=<IP ADDRESS OF MACHINE>
+netmask=<NETMASK>
+hostname=mousse
+ethaddr=00:00:10:20:30:44
+gateway=<IP ADDRESS OF GATEWAY/ROUTER>
+
+
+IV. IP Options which configure NFS Root/Boot Support
+
+root=/dev/nfs
+serverip=<NFS SERVER IP ADDRESS>
+nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
+
+V. U-Boot Image Support
+
+The U-Boot boot loader assumes that after you build
+your kernel (vmlinux), you will create a U-Boot image
+using the following commands or script:
+
+#!/bin/csh
+/bin/touch vmlinux.img
+/bin/rm vmlinux.img
+set path=($TOOLBASE/bin $path)
+set path=($U_BOOT/tools $path)
+powerpc-linux-objcopy -S -O binary vmlinux vmlinux.bin
+gzip -vf vmlinux.bin
+mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n vmlinux.bin.gz -d vmlinux.bin.gz vmlinux.img
+ls -l vmlinux.img
+
+
+VI. ONBOARD FLASH Support
+
+FLASH support is provided for the onboard FLASH chip Bootrom area.
+U-Boot is loaded into either the ROM boot region of the FLASH chip,
+after first being boot-strapped from a pre-progammed AMD29F040 PLCC
+bootrom. The PLCC needs to be programmed with a ROM burner using
+AMD 29F040 ROM parts and the u-boot.bin or u-boot.hex (S-Record)
+images.
+
+The PLCC overlays this same region of flash as the onboard FLASH,
+the jumper J100 is a chip-select for which flash chip you want to
+progam. When jumper J100 is connected to pins 2-3, you boot from
+PLCC FLASH.
+
+To bringup a system, simply flash a flash an AMD29F040 PLCC
+bootrom, and put this in the PLCC socket. Move jumper J100 to
+pins 2-3 and boot from the PLCC.
+
+
+Now, while the system is running, move Jumper J100 to
+pins 1-2 and follow the procedure below to FLASH a bootrom
+(u-boot.bin) image into the onboard bootrom region (AMD29LV160DB):
+
+tftp 100000 u-boot.bin
+protect off FFF00000 FFF7FFFF
+erase FFF00000 FFF7FFFF
+cp.b 100000 FFF00000 \${filesize}\
+
+
+Here is an example:
+
+=>tftp 100000 u-boot.bin
+eth_halt
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 123220 (1e154 hex)
+eth_halt
+=>protect off FFF00000 FFF7FFFF
+Un-Protected 8 sectors
+=>erase FFF00000 FFF7FFFF
+Erase Flash from 0xfff00000 to 0xfff7ffff
+Erase FLASH[PLCC_BOOT] -8 sectors:........ done
+Erased 8 sectors
+=>cp.b 100000 FFF00000 1e154
+Copy to Flash... FLASH[PLCC_BOOT]:..done
+=>
+
+
+B. FLASH RAMDISK REGION
+
+FLASH support is provided for an Onboard 512K RAMDISK region.
+
+TThe following commands will FLASH a bootrom (u-boot.bin) image
+into the onboard FLASH region (AMD29LV160DB 2MB FLASH):
+
+tftp 100000 u-boot.bin
+protect off FFF80000 FFFFFFFF
+erase FFF80000 FFFFFFFF
+cp.b 100000 FFF80000 \${filesize}\
+
+
+C. FLASH KERNEL REGION (960KB)
+
+FLASH support is provided for the 960KB onboard FLASH1 segment.
+This allows flashing of kernel images which U-Boot can load
+and run (standalone) from the onboard FLASH chip. It also assumes
+
+The following commands will FLASH a kernel image to 0xffe10000
+
+tftp 100000 vmlinux.img
+protect off FFE10000 FFEFFFFF
+erase FFE10000 FFEFFFFF
+cp.b 100000 FFE10000 \${filesize}\
+reset
+
+Here is an example:
+
+
+=>tftp 100000 vmlinux.img
+eth_halt
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+TFTP from server 209.128.93.133; our IP address is 209.128.93.138
+Filename 'vmlinux.img'.
+Load address: 0x100000
+Loading: #####################################################################################################################################################
+done
+Bytes transferred = 760231 (b99a7 hex)
+eth_halt
+=>protect off FFE10000 FFEFFFFF
+Un-Protected 15 sectors
+=>erase FFE10000 FFEFFFFF
+Erase Flash from 0xffe10000 to 0xffefffff
+Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
+Erased 15 sectors
+=>cp.b 100000 FFE10000 b99a7
+Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
+=>
+
+
+When finished, use the command:
+
+bootm ffe10000
+
+to start the kernel.
+
+Finally, to make this the default boot command, use
+the following commands:
+
+setenv bootcmd bootm ffe10000
+savenv
+
+to make it automatically boot the kernel from FLASH.
+
+
+To go back to development mode (NFS boot)
+
+setenv bootcmd tftp 100000 vmlinux.img\;bootm
+savenv
+
+
+=>tftp 100000 vmlinux.img
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+Filename 'vmlinux.img'.
+Load address: 0x100000
+Loading: ####################################################################################################################################################
+done
+Bytes transferred = 752717 (b7c4d hex)
+eth_halt
+=>protect off FFE10000 FFEFFFFF
+Un-Protected 15 sectors
+=>erase FFE10000 FFEFFFFF
+Erase Flash from 0xffe10000 to 0xffefffff
+Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
+Erased 15 sectors
+=>cp.b 100000 FFE10000 b7c4d
+Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
+=>bootm ffe10000
+## Booting image at ffe10000 ...
+   Image Name:   vmlinux.bin.gz
+   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:    752653 Bytes = 735 kB = 0 MB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Total memory = 64MB; using 0kB for hash table (at 00000000)
+Linux version 2.4.2_hhl20 (jfd@atlantis) (gcc version 2.95.2 19991024 (release)) #597 Wed Sep 5 23:23:23 PDT 2001
+cpu0: MPC8240/KAHLUA : MOUSSE Platform : 64MB RAM: MPLD Rev. 7f
+Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)
+IP PNP: 802.3 Ethernet Address=<0:0:10:20:30:44>
+NOTICE: mounting root file system via NFS
+On node 0 totalpages: 16384
+zone(0): 16384 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+time_init: decrementer frequency = 16.665914 MHz
+time_init: MPC8240 PCI Bus frequency = 33.331828 MHz
+Calibrating delay loop... 133.12 BogoMIPS
+Memory: 62436k available (1336k kernel code, 500k data, 88k init, 0k highmem)
+Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
+Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
+POSIX conformance testing by UNIFIX
+PCI: Probing PCI hardware
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd v1.8
+pty: 256 Unix98 ptys configured
+block: queued sectors max/low 41394kB/13798kB, 128 slots per queue
+Uniform Multi-Platform E-IDE driver Revision: 6.31
+ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+PDC20262: IDE controller on PCI bus 00 dev 70
+PDC20262: chipset revision 1
+PDC20262: not 100% native mode: will probe irqs later
+PDC20262: ROM enabled at 0x000d0000
+PDC20262: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
+PDC20262: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
+PDC20262: irq=3 dev->irq=3
+    ide0: BM-DMA at 0xbfff00-0xbfff07, BIOS settings: hda:DMA, hdb:DMA
+    ide1: BM-DMA at 0xbfff08-0xbfff0f, BIOS settings: hdc:pio, hdd:pio
+hda: WDC WD300AB-00BVA0, ATA DISK drive
+hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
+ide0 at 0xbfff78-0xbfff7f,0xbfff76 on irq 3
+ide1 at 0xbfff68-0xbfff6f,0xbfff66 on irq 3
+hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
+hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
+Uniform CD-ROM driver Revision: 3.12
+Partition check:
+ /dev/ide/host0/bus0/target0/lun0: p1 p2
+hd: unable to get major 3 for hard disk
+udf: registering filesystem
+loop: loaded (max 8 devices)
+Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xffe08080 (irq = 4) is a ST16650
+Linux Tulip driver version 0.9.13a (January 20, 2001)
+eth0: Digital DS21143 Tulip rev 65 at 0xbfff80, EEPROM not present, 00:00:10:20:30:44, IRQ 1.
+eth0:  MII transceiver #0 config 3000 status 7829 advertising 01e1.
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 4096 bind 4096)
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x0
+VFS: Mounted root (nfs filesystem).
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k init 4k openfirmware
+eth0: Setting full-duplex based on MII#0 link partner capability of 45e1.
+INIT: version 2.78 booting
+INIT: Entering runlevel: 2
+
+
+Welcome to Linux/PPC
+MPC8240/MOUSSE
+
+
+mousse login: root
+Password:
+PAM_unix[13]: (login) session opened for user root by LOGIN(uid=0)
+Last login: Thu Sep  6 00:16:51 2001 on console
+
+
+Welcome to Linux/PPC
+MPC8240/MOUSSE
+
+
+mousse#
diff --git a/u-boot/board/mousse/flash.c b/u-boot/board/mousse/flash.c
new file mode 100644
index 0000000..d729f33
--- /dev/null
+++ b/u-boot/board/mousse/flash.c
@@ -0,0 +1,939 @@
+/*
+ * MOUSSE/MPC8240 Board definitions.
+ * Flash Routines for MOUSSE onboard AMD29LV106DB devices
+ *
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
+ * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <malloc.h>
+#include "mousse.h"
+#include "flash.h"
+
+int flashLibDebug = 0;
+int flashLibInited = 0;
+
+#define OK  0
+#define ERROR -1
+#define STATUS int
+#define PRINTF			if (flashLibDebug) printf
+#if 0
+#define PRIVATE			static
+#else
+#define PRIVATE
+#endif
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+#define SLEEP_DELAY    166
+#define FLASH_SECTOR_SIZE   (64*1024)
+/***********************************************************************
+ *
+ * Virtual Flash Devices on Mousse board
+ *
+ * These must be kept in sync with the definitions in flashLib.h.
+ *
+ ***********************************************************************/
+
+PRIVATE flash_dev_t flashDev[] = {
+    /* Bank 0 sector SA0 (16 kB) */
+    {	"SA0",FLASH0_BANK, FLASH0_SEG0_START, 1, 14,
+	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+    },
+    /* Bank 0 sector SA1 (8 kB) */
+    {	"SA1", FLASH0_BANK, FLASH0_SEG0_START + 0x4000, 1, 13,
+	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+    },
+    /* Bank 0 sector SA2 (8 kB) */
+    {	"SA2", FLASH0_BANK, FLASH0_SEG0_START + 0x6000, 1, 13,
+	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+    },
+    /* Bank 0 sector SA3 is occluded by Mousse I/O devices */
+    /* Bank 0 sectors SA4-SA18, after Mousse devices up to PLCC (960 kB)  */
+    {	"KERNEL", FLASH0_BANK, FLASH0_SEG1_START, 15, 16,
+	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+    },
+    /* Bank 0 sectors SA19-SA26, jumper can occlude this by PLCC (512 kB) */
+    /* This is where the Kahlua boot vector and boot ROM code resides. */
+    {	"BOOT",FLASH0_BANK, FLASH0_SEG2_START, 8, 16,
+	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+    },
+    /* Bank 0 sectors SA27-SA34 (512 kB) */
+    {	"RAMDISK",FLASH0_BANK, FLASH0_SEG3_START, 8, 16,
+	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+    },
+};
+
+int flashDevCount = (sizeof (flashDev) / sizeof (flashDev[0]));
+
+#define DEV(no)			(&flashDev[no])
+#define DEV_NO(dev)		((dev) - flashDev)
+
+/***********************************************************************
+ *
+ * Private Flash Routines
+ *
+ ***********************************************************************/
+
+/*
+ * The convention is:
+ *
+ * "addr" is always the PROM raw address, which is the address of an
+ * 8-bit quantity for flash 0 and 16-bit quantity for flash 1.
+ *
+ * "pos" is always a logical byte position from the PROM beginning.
+ */
+
+#define FLASH0_ADDR(dev, addr) \
+	((unsigned char *) ((dev)->base + (addr)))
+
+#define FLASH0_WRITE(dev, addr, value) \
+	(*FLASH0_ADDR(dev, addr) = (value))
+
+#define FLASH0_READ(dev, addr) \
+	(*FLASH0_ADDR(dev, addr))
+
+PRIVATE int flashCheck (flash_dev_t * dev)
+{
+	if (!flashLibInited) {
+		printf ("flashCheck: flashLib not initialized\n");
+		return ERROR;
+	}
+
+	if (dev < &flashDev[0] || dev >= &flashDev[flashDevCount]) {
+		printf ("flashCheck: Bad dev parameter\n");
+		return ERROR;
+	}
+
+	if (!dev->found) {
+		printf ("flashCheck: Device %d not available\n", DEV_NO (dev));
+		return ERROR;
+	}
+
+	return OK;
+}
+
+PRIVATE void flashReset (flash_dev_t * dev)
+{
+	PRINTF ("flashReset: dev=%d\n", DEV_NO (dev));
+
+	if (dev->bank == FLASH0_BANK) {
+		FLASH0_WRITE (dev, 0x555, 0xaa);
+		FLASH0_WRITE (dev, 0xaaa, 0x55);
+		FLASH0_WRITE (dev, 0x555, 0xf0);
+	}
+
+	udelay (SLEEP_DELAY);
+
+	PRINTF ("flashReset: done\n");
+}
+
+PRIVATE int flashProbe (flash_dev_t * dev)
+{
+	int rv, deviceID, vendorID;
+
+	PRINTF ("flashProbe: dev=%d\n", DEV_NO (dev));
+
+	if (dev->bank != FLASH0_BANK) {
+		rv = ERROR;
+		goto DONE;
+	}
+
+	FLASH0_WRITE (dev, 0xaaa, 0xaa);
+	FLASH0_WRITE (dev, 0x555, 0x55);
+	FLASH0_WRITE (dev, 0xaaa, 0x90);
+
+	udelay (SLEEP_DELAY);
+
+	vendorID = FLASH0_READ (dev, 0);
+	deviceID = FLASH0_READ (dev, 2);
+
+	FLASH0_WRITE (dev, 0, 0xf0);
+
+	PRINTF ("flashProbe: vendor=0x%x device=0x%x\n", vendorID, deviceID);
+
+	if (vendorID == dev->vendorID && deviceID == dev->deviceID)
+		rv = OK;
+	else
+		rv = ERROR;
+
+  DONE:
+	PRINTF ("flashProbe: rv=%d\n", rv);
+
+	return rv;
+}
+
+PRIVATE int flashWait (flash_dev_t * dev, int addr, int expect, int erase)
+{
+	int rv = ERROR;
+	int i, data;
+	int polls;
+
+#if 0
+	PRINTF ("flashWait: dev=%d addr=0x%x expect=0x%x erase=%d\n",
+		DEV_NO (dev), addr, expect, erase);
+#endif
+
+	if (dev->bank != FLASH0_BANK) {
+		rv = ERROR;
+		goto done;
+	}
+
+	if (erase)
+		polls = FLASH_ERASE_SECTOR_TIMEOUT;	/* Ticks */
+	else
+		polls = FLASH_PROGRAM_POLLS;	/* Loops */
+
+	for (i = 0; i < polls; i++) {
+		if (erase)
+			udelay (SLEEP_DELAY);
+
+		data = FLASH0_READ (dev, addr);
+
+		if (((data ^ expect) & 0x80) == 0) {
+			rv = OK;
+			goto done;
+		}
+
+		if (data & 0x20) {
+			/*
+			 * If the 0x20 bit has come on, it could actually be because
+			 * the operation succeeded, so check the done bit again.
+			 */
+
+			data = FLASH0_READ (dev, addr);
+
+			if (((data ^ expect) & 0x80) == 0) {
+				rv = OK;
+				goto done;
+			}
+
+			printf ("flashWait: Program error (dev: %d, addr: 0x%x)\n",
+					DEV_NO (dev), addr);
+
+			flashReset (dev);
+			rv = ERROR;
+			goto done;
+		}
+	}
+
+	printf ("flashWait: Timeout %s (dev: %d, addr: 0x%x)\n",
+		erase ? "erasing sector" : "programming byte",
+		DEV_NO (dev), addr);
+
+  done:
+
+#if 0
+	PRINTF ("flashWait: rv=%d\n", rv);
+#endif
+
+	return rv;
+}
+
+/***********************************************************************
+ *
+ * Public Flash Routines
+ *
+ ***********************************************************************/
+
+STATUS flashLibInit (void)
+{
+	int i;
+
+	PRINTF ("flashLibInit: devices=%d\n", flashDevCount);
+
+	for (i = 0; i < flashDevCount; i++) {
+		flash_dev_t *dev = &flashDev[i];
+
+		/*
+		 * For bank 1, probe both without and with byte swappage,
+		 * so that this module works on both old and new Mousse boards.
+		 */
+
+		flashReset (dev);
+
+		if (flashProbe (dev) != ERROR)
+			dev->found = 1;
+
+		flashReset (dev);
+
+		if (flashProbe (dev) != ERROR)
+			dev->found = 1;
+
+		dev->swap = 0;
+
+		if (dev->found) {
+			PRINTF ("\n  FLASH %s[%d]: iobase=0x%x - %d sectors %d KB",
+				flashDev[i].name, i, flashDev[i].base,
+				flashDev[i].sectors,
+				(flashDev[i].sectors * FLASH_SECTOR_SIZE) / 1024);
+
+		}
+	}
+
+	flashLibInited = 1;
+
+	PRINTF ("flashLibInit: done\n");
+
+	return OK;
+}
+
+STATUS flashEraseSector (flash_dev_t * dev, int sector)
+{
+	int pos, addr;
+
+	PRINTF ("flashErasesector: dev=%d sector=%d\n", DEV_NO (dev), sector);
+
+	if (flashCheck (dev) == ERROR)
+		return ERROR;
+
+	if (sector < 0 || sector >= dev->sectors) {
+		printf ("flashEraseSector: Sector out of range (dev: %d, sector: %d)\n", DEV_NO (dev), sector);
+		return ERROR;
+	}
+
+	pos = FLASH_SECTOR_POS (dev, sector);
+
+	if (dev->bank != FLASH0_BANK) {
+		return ERROR;
+	}
+
+	addr = pos;
+
+	FLASH0_WRITE (dev, 0xaaa, 0xaa);
+	FLASH0_WRITE (dev, 0x555, 0x55);
+	FLASH0_WRITE (dev, 0xaaa, 0x80);
+	FLASH0_WRITE (dev, 0xaaa, 0xaa);
+	FLASH0_WRITE (dev, 0x555, 0x55);
+	FLASH0_WRITE (dev, addr, 0x30);
+
+	return flashWait (dev, addr, 0xff, 1);
+}
+
+/*
+ * Note: it takes about as long to flash all sectors together with Chip
+ * Erase as it does to flash them one at a time (about 30 seconds for 2
+ * MB).  Also since we want to be able to treat subsets of sectors as if
+ * they were complete devices, we don't use Chip Erase.
+ */
+
+STATUS flashErase (flash_dev_t * dev)
+{
+	int sector;
+
+	PRINTF ("flashErase: dev=%d sectors=%d\n", DEV_NO (dev), dev->sectors);
+
+	if (flashCheck (dev) == ERROR)
+		return ERROR;
+
+	for (sector = 0; sector < dev->sectors; sector++) {
+		if (flashEraseSector (dev, sector) == ERROR)
+			return ERROR;
+	}
+	return OK;
+}
+
+/*
+ * Read and write bytes
+ */
+
+STATUS flashRead (flash_dev_t * dev, int pos, char *buf, int len)
+{
+	int addr, words;
+
+	PRINTF ("flashRead: dev=%d pos=0x%x buf=0x%x len=0x%x\n",
+		DEV_NO (dev), pos, (int) buf, len);
+
+	if (flashCheck (dev) == ERROR)
+		return ERROR;
+
+	if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
+		printf ("flashRead: Position out of range "
+			"(dev: %d, pos: 0x%x, len: 0x%x)\n",
+			DEV_NO (dev), pos, len);
+		return ERROR;
+	}
+
+	if (len == 0)
+		return OK;
+
+	if (dev->bank == FLASH0_BANK) {
+		addr = pos;
+		words = len;
+
+		PRINTF ("flashRead: memcpy(0x%x, 0x%x, 0x%x)\n",
+			(int) buf, (int) FLASH0_ADDR (dev, pos), len);
+
+		memcpy (buf, FLASH0_ADDR (dev, addr), words);
+
+	}
+	PRINTF ("flashRead: rv=OK\n");
+
+	return OK;
+}
+
+STATUS flashWrite (flash_dev_t * dev, int pos, char *buf, int len)
+{
+	int addr, words;
+
+	PRINTF ("flashWrite: dev=%d pos=0x%x buf=0x%x len=0x%x\n",
+		DEV_NO (dev), pos, (int) buf, len);
+
+	if (flashCheck (dev) == ERROR)
+		return ERROR;
+
+	if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
+		printf ("flashWrite: Position out of range "
+			"(dev: %d, pos: 0x%x, len: 0x%x)\n",
+			DEV_NO (dev), pos, len);
+		return ERROR;
+	}
+
+	if (len == 0)
+		return OK;
+
+	if (dev->bank == FLASH0_BANK) {
+		unsigned char tmp;
+
+		addr = pos;
+		words = len;
+
+		while (words--) {
+			tmp = *buf;
+			if (~FLASH0_READ (dev, addr) & tmp) {
+				printf ("flashWrite: Attempt to program 0 to 1 "
+					"(dev: %d, addr: 0x%x, data: 0x%x)\n",
+					DEV_NO (dev), addr, tmp);
+				return ERROR;
+			}
+			FLASH0_WRITE (dev, 0xaaa, 0xaa);
+			FLASH0_WRITE (dev, 0x555, 0x55);
+			FLASH0_WRITE (dev, 0xaaa, 0xa0);
+			FLASH0_WRITE (dev, addr, tmp);
+			if (flashWait (dev, addr, tmp, 0) < 0)
+				return ERROR;
+			buf++;
+			addr++;
+		}
+	}
+
+	PRINTF ("flashWrite: rv=OK\n");
+
+	return OK;
+}
+
+/*
+ * flashWritable returns TRUE if a range contains all F's.
+ */
+
+STATUS flashWritable (flash_dev_t * dev, int pos, int len)
+{
+	int addr, words;
+	int rv = ERROR;
+
+	PRINTF ("flashWritable: dev=%d pos=0x%x len=0x%x\n",
+			DEV_NO (dev), pos, len);
+
+	if (flashCheck (dev) == ERROR)
+		goto done;
+
+	if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
+		printf ("flashWritable: Position out of range "
+			"(dev: %d, pos: 0x%x, len: 0x%x)\n",
+			DEV_NO (dev), pos, len);
+		goto done;
+	}
+
+	if (len == 0) {
+		rv = 1;
+		goto done;
+	}
+
+	if (dev->bank == FLASH0_BANK) {
+		addr = pos;
+		words = len;
+
+		while (words--) {
+			if (FLASH0_READ (dev, addr) != 0xff) {
+				rv = 0;
+				goto done;
+			}
+			addr++;
+		}
+	}
+
+	rv = 1;
+
+  done:
+	PRINTF ("flashWrite: rv=%d\n", rv);
+	return rv;
+}
+
+
+/*
+ * NOTE: the below code cannot run from FLASH!!!
+ */
+/***********************************************************************
+ *
+ * Flash Diagnostics
+ *
+ ***********************************************************************/
+
+STATUS flashDiag (flash_dev_t * dev)
+{
+	unsigned int *buf = 0;
+	int i, len, sector;
+	int rv = ERROR;
+
+	if (flashCheck (dev) == ERROR)
+		return ERROR;
+
+	printf ("flashDiag: Testing device %d, "
+		"base: 0x%x, %d sectors @ %d kB = %d kB\n",
+		DEV_NO (dev), dev->base,
+		dev->sectors,
+		1 << (dev->lgSectorSize - 10),
+		dev->sectors << (dev->lgSectorSize - 10));
+
+	len = 1 << dev->lgSectorSize;
+
+	printf ("flashDiag: Erasing\n");
+
+	if (flashErase (dev) == ERROR) {
+		printf ("flashDiag: Erase failed\n");
+		goto done;
+	}
+	printf ("%d bytes requested ...\n", len);
+	buf = malloc (len);
+	printf ("allocated %d bytes ...\n", len);
+	if (buf == 0) {
+		printf ("flashDiag: Out of memory\n");
+		goto done;
+	}
+
+	/*
+	 * Write unique counting pattern to each sector
+	 */
+
+	for (sector = 0; sector < dev->sectors; sector++) {
+		printf ("flashDiag: Write sector %d\n", sector);
+
+		for (i = 0; i < len / 4; i++)
+			buf[i] = sector << 24 | i;
+
+		if (flashWrite (dev,
+				sector << dev->lgSectorSize,
+				(char *) buf, len) == ERROR) {
+			printf ("flashDiag: Write failed (dev: %d, sector: %d)\n",
+				DEV_NO (dev), sector);
+			goto done;
+		}
+	}
+
+	/*
+	 * Verify
+	 */
+
+	for (sector = 0; sector < dev->sectors; sector++) {
+		printf ("flashDiag: Verify sector %d\n", sector);
+
+		if (flashRead (dev,
+				   sector << dev->lgSectorSize,
+				   (char *) buf, len) == ERROR) {
+			printf ("flashDiag: Read failed (dev: %d, sector: %d)\n",
+				DEV_NO (dev), sector);
+			goto done;
+		}
+
+		for (i = 0; i < len / 4; i++) {
+			if (buf[i] != (sector << 24 | i)) {
+				printf ("flashDiag: Verify error "
+					"(dev: %d, sector: %d, offset: 0x%x)\n",
+					DEV_NO (dev), sector, i);
+				printf ("flashDiag: Expected 0x%08x, got 0x%08x\n",
+					sector << 24 | i, buf[i]);
+
+				goto done;
+			}
+		}
+	}
+
+	printf ("flashDiag: Erasing\n");
+
+	if (flashErase (dev) == ERROR) {
+		printf ("flashDiag: Final erase failed\n");
+		goto done;
+	}
+
+	rv = OK;
+
+  done:
+	if (buf)
+		free (buf);
+
+	if (rv == OK)
+		printf ("flashDiag: Device %d passed\n", DEV_NO (dev));
+	else
+		printf ("flashDiag: Device %d failed\n", DEV_NO (dev));
+
+	return rv;
+}
+
+STATUS flashDiagAll (void)
+{
+	int i;
+	int rv = OK;
+
+	PRINTF ("flashDiagAll: devices=%d\n", flashDevCount);
+
+	for (i = 0; i < flashDevCount; i++) {
+		flash_dev_t *dev = &flashDev[i];
+
+		if (dev->found && flashDiag (dev) == ERROR)
+			rv = ERROR;
+	}
+
+	if (rv == OK)
+		printf ("flashDiagAll: Passed\n");
+	else
+		printf ("flashDiagAll: Failed because of earlier errors\n");
+
+	return OK;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size = 0;
+	flash_dev_t *dev = NULL;
+
+	flashLibInit ();
+
+	/*
+	 * Provide info for FLASH (up to 960K) of Kernel Image data.
+	 */
+	dev = FLASH_DEV_BANK0_LOW;
+	flash_info[FLASH_BANK_KERNEL].flash_id =
+			(dev->vendorID << 16) | dev->deviceID;
+	flash_info[FLASH_BANK_KERNEL].sector_count = dev->sectors;
+	flash_info[FLASH_BANK_KERNEL].size =
+			flash_info[FLASH_BANK_KERNEL].sector_count * FLASH_SECTOR_SIZE;
+	flash_info[FLASH_BANK_KERNEL].start[FIRST_SECTOR] = dev->base;
+	size += flash_info[FLASH_BANK_KERNEL].size;
+
+	/*
+	 * Provide info for 512K PLCC FLASH ROM (U-Boot)
+	 */
+	dev = FLASH_DEV_BANK0_BOOT;
+	flash_info[FLASH_BANK_BOOT].flash_id =
+			(dev->vendorID << 16) | dev->deviceID;
+	flash_info[FLASH_BANK_BOOT].sector_count = dev->sectors;
+	flash_info[FLASH_BANK_BOOT].size =
+			flash_info[FLASH_BANK_BOOT].sector_count * FLASH_SECTOR_SIZE;
+	flash_info[FLASH_BANK_BOOT].start[FIRST_SECTOR] = dev->base;
+	size += flash_info[FLASH_BANK_BOOT].size;
+
+
+	/*
+	 * Provide info for 512K FLASH0 segment (U-Boot)
+	 */
+	dev = FLASH_DEV_BANK0_HIGH;
+	flash_info[FLASH_BANK_AUX].flash_id =
+			(dev->vendorID << 16) | dev->deviceID;
+	flash_info[FLASH_BANK_AUX].sector_count = dev->sectors;
+	flash_info[FLASH_BANK_AUX].size =
+			flash_info[FLASH_BANK_AUX].sector_count * FLASH_SECTOR_SIZE;
+	flash_info[FLASH_BANK_AUX].start[FIRST_SECTOR] = dev->base;
+	size += flash_info[FLASH_BANK_AUX].size;
+
+
+	return size;
+}
+
+/*
+ * Get flash device from U-Boot flash info.
+ */
+flash_dev_t *getFlashDevFromInfo (flash_info_t * info)
+{
+	int i;
+
+	if (!info)
+		return NULL;
+
+	for (i = 0; i < flashDevCount; i++) {
+		flash_dev_t *dev = &flashDev[i];
+
+		if (dev->found && (dev->base == info->start[0]))
+			return dev;
+	}
+	printf ("ERROR: notice, no FLASH mapped at address 0x%x\n",
+			(unsigned int) info->start[0]);
+	return NULL;
+}
+
+ulong flash_get_size (vu_long * addr, flash_info_t * info)
+{
+	int i;
+
+	for (i = 0; i < flashDevCount; i++) {
+		flash_dev_t *dev = &flashDev[i];
+
+		if (dev->found) {
+			if (dev->base == (unsigned int) addr) {
+				info->flash_id = (dev->vendorID << 16) | dev->deviceID;
+				info->sector_count = dev->sectors;
+				info->size = info->sector_count * FLASH_SECTOR_SIZE;
+				return dev->sectors * FLASH_SECTOR_SIZE;
+			}
+		}
+	}
+	return 0;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+	unsigned int chip;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch ((info->flash_id >> 16) & 0xff) {
+	case 0x1:
+		printf ("AMD ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+	chip = (unsigned int) info->flash_id & 0x000000ff;
+
+	switch (chip) {
+
+	case AMD_ID_F040B:
+		printf ("AM29F040B (4 Mbit)\n");
+		break;
+
+	case AMD_ID_LV160B:
+	case FLASH_AM160LV:
+	case 0x49:
+		printf ("AM29LV160B (16 Mbit / 2M x 8bit)\n");
+		break;
+
+	default:
+		printf ("Unknown Chip Type:0x%x\n", chip);
+		break;
+	}
+
+	printf ("  Size: %ld bytes in %d Sectors\n",
+		info->size, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[FIRST_SECTOR] + i * FLASH_SECTOR_SIZE,
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+}
+
+
+/*
+ * Erase a range of flash sectors.
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	vu_long *addr = (vu_long *) (info->start[0]);
+	int prot, sect, l_sect;
+	flash_dev_t *dev = NULL;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Start erase on unprotected sectors */
+	dev = getFlashDevFromInfo (info);
+	if (dev) {
+		printf ("Erase FLASH[%s] -%d sectors:", dev->name, dev->sectors);
+		for (sect = s_first; sect <= s_last; sect++) {
+			if (info->protect[sect] == 0) {	/* not protected */
+				addr = (vu_long *) (dev->base);
+				/*   printf("erase_sector: sector=%d, addr=0x%x\n",
+				   sect, addr); */
+				printf (".");
+				if (ERROR == flashEraseSector (dev, sect)) {
+					printf ("ERROR: could not erase sector %d on FLASH[%s]\n", sect, dev->name);
+					return 1;
+				}
+			}
+		}
+	}
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+
+	flash_dev_t *dev = getFlashDevFromInfo (info);
+	int addr = dest - info->start[0];
+
+	if (!dev)
+		return 1;
+
+	if (OK != flashWrite (dev, addr, (char *) &data, sizeof (ulong))) {
+		printf ("ERROR: could not write to addr=0x%x, data=0x%x\n",
+			(unsigned int) addr, (unsigned) data);
+		return 1;
+	}
+
+	if ((addr % FLASH_SECTOR_SIZE) == 0)
+		printf (".");
+
+
+	PRINTF ("write_word:0x%x, base=0x%x, addr=0x%x, data=0x%x\n",
+		(unsigned) info->start[0],
+		(unsigned) dest,
+		(unsigned) (dest - info->start[0]), (unsigned) data);
+
+	return (0);
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+	flash_dev_t *dev = getFlashDevFromInfo (info);
+
+	if (dev) {
+		printf ("FLASH[%s]:", dev->name);
+		wp = (addr & ~3);	/* get lower word aligned address */
+
+		/*
+		 * handle unaligned start bytes
+		 */
+		if ((l = addr - wp) != 0) {
+			data = 0;
+			for (i = 0, cp = wp; i < l; ++i, ++cp) {
+				data = (data << 8) | (*(uchar *) cp);
+			}
+			for (; i < 4 && cnt > 0; ++i) {
+				data = (data << 8) | *src++;
+				--cnt;
+				++cp;
+			}
+			for (; cnt == 0 && i < 4; ++i, ++cp) {
+				data = (data << 8) | (*(uchar *) cp);
+			}
+			if ((rc = write_word (info, wp, data)) != 0) {
+				return (rc);
+			}
+			wp += 4;
+		}
+
+		/*
+		 * handle word aligned part
+		 */
+		while (cnt >= 4) {
+			data = 0;
+			for (i = 0; i < 4; ++i) {
+				data = (data << 8) | *src++;
+			}
+			if ((rc = write_word (info, wp, data)) != 0) {
+				return (rc);
+			}
+			wp += 4;
+			cnt -= 4;
+		}
+
+		if (cnt == 0) {
+			return (0);
+		}
+
+		/*
+		 * handle unaligned tail bytes
+		 */
+		data = 0;
+		for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+			data = (data << 8) | *src++;
+			--cnt;
+		}
+		for (; i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		return (write_word (info, wp, data));
+	}
+	return 1;
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/u-boot/board/mousse/flash.h b/u-boot/board/mousse/flash.h
new file mode 100644
index 0000000..b7e4619
--- /dev/null
+++ b/u-boot/board/mousse/flash.h
@@ -0,0 +1,78 @@
+#ifndef	FLASH_LIB_H
+#define	FLASH_LIB_H
+
+#include <common.h>
+
+/* PIO operations max */
+#define	FLASH_PROGRAM_POLLS		100000
+
+/* 10 Seconds default */
+#define	FLASH_ERASE_SECTOR_TIMEOUT	(10*1000 /*SEC*/ )
+
+/* Flash device info structure */
+typedef struct flash_dev_s {
+    char        name[24];               /* Bank Name */
+    int		bank;			/* Bank 0 or 1 */
+    unsigned int base;			/* Base address */
+    int		sectors;		/* Sector count */
+    int		lgSectorSize;		/* Log2(usable bytes/sector) */
+    int		vendorID;		/* Expected vendor ID */
+    int		deviceID;		/* Expected device ID */
+    int		found;			/* Set if found by flashLibInit */
+    int		swap;			/* Set for bank 1 if byte swap req'd */
+} flash_dev_t;
+
+#define FLASH_MAX_POS(dev) \
+	((dev)->sectors << (dev)->lgSectorSize)
+
+#define FLASH_SECTOR_POS(dev, sector) \
+	((sector) << (dev)->lgSectorSize)
+
+/* AMD 29F040 */
+#define FLASH0_BANK			0
+#define FLASH0_VENDOR_ID		0x01
+#define FLASH0_DEVICE_ID		0x49
+
+/* AMD29LV160DB */
+#define FLASH1_BANK			1
+#define FLASH1_VENDOR_ID		0x0001
+#define FLASH1_DEVICE_ID		0x2249
+
+extern	flash_dev_t			flashDev[];
+extern	int				flashDevCount;
+
+/*
+ * Device pointers
+ *
+ * These must be kept in sync with the table in flashLib.c.
+ */
+#define FLASH_DEV_BANK0_SA0		(&flashDev[0])
+#define FLASH_DEV_BANK0_SA1		(&flashDev[1])
+#define FLASH_DEV_BANK0_SA2		(&flashDev[2])
+#define FLASH_DEV_BANK0_LOW		(&flashDev[3]) /* 960K */
+#define FLASH_DEV_BANK0_BOOT		(&flashDev[4]) /* PLCC */
+#define FLASH_DEV_BANK0_HIGH		(&flashDev[5]) /* 512K PLCC shadow */
+
+unsigned long flash_init(void);
+int flashEraseSector(flash_dev_t *dev, int sector);
+int flashErase(flash_dev_t *dev);
+int flashRead(flash_dev_t *dev, int pos, char *buf, int len);
+int flashWrite(flash_dev_t *dev, int pos, char *buf, int len);
+int flashWritable(flash_dev_t *dev, int pos, int len);
+int flashDiag(flash_dev_t *dev);
+int flashDiagAll(void);
+
+ulong flash_get_size (vu_long *addr, flash_info_t *info);
+void flash_print_info  (flash_info_t *info);
+int  flash_erase (flash_info_t *info, int s_first, int s_last);
+int  write_buff  (flash_info_t *info, uchar *src, ulong addr, ulong cnt);
+
+/*
+ * Flash info indices.
+ */
+#define FLASH_BANK_KERNEL 0
+#define FLASH_BANK_BOOT   1
+#define FLASH_BANK_AUX    2
+#define FIRST_SECTOR      0
+
+#endif	/* !FLASH_LIB_H */
diff --git a/u-boot/board/mousse/m48t59y.c b/u-boot/board/mousse/m48t59y.c
new file mode 100644
index 0000000..beb26fe
--- /dev/null
+++ b/u-boot/board/mousse/m48t59y.c
@@ -0,0 +1,324 @@
+/*
+ * SGS M48-T59Y TOD/NVRAM Driver
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
+ *
+ * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * SGS M48-T59Y TOD/NVRAM Driver
+ *
+ * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and
+ * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD)
+ * registers which are used to set/get the internal date/time functions.
+ *
+ * This module implements Y2K compliance by taking full year numbers
+ * and translating back and forth from the TOD 2-digit year.
+ *
+ * NOTE: for proper interaction with an operating system, the TOD should
+ * be used to store Universal Coordinated Time (GMT) and timezone
+ * conversions should be used.
+ *
+ * Here is a diagram of the memory layout:
+ *
+ * +---------------------------------------------+ 0xffe0a000
+ * | Non-volatile memory                         | .
+ * |                                             | .
+ * | (8176 bytes of Non-volatile memory)         | .
+ * |                                             | .
+ * +---------------------------------------------+ 0xffe0bff0
+ * | Flags                                       |
+ * +---------------------------------------------+ 0xffe0bff1
+ * | Unused                                      |
+ * +---------------------------------------------+ 0xffe0bff2
+ * | Alarm Seconds                               |
+ * +---------------------------------------------+ 0xffe0bff3
+ * | Alarm Minutes                               |
+ * +---------------------------------------------+ 0xffe0bff4
+ * | Alarm Date                                  |
+ * +---------------------------------------------+ 0xffe0bff5
+ * | Interrupts                                  |
+ * +---------------------------------------------+ 0xffe0bff6
+ * | WatchDog                                    |
+ * +---------------------------------------------+ 0xffe0bff7
+ * | Calibration                                 |
+ * +---------------------------------------------+ 0xffe0bff8
+ * | Seconds                                     |
+ * +---------------------------------------------+ 0xffe0bff9
+ * | Minutes                                     |
+ * +---------------------------------------------+ 0xffe0bffa
+ * | Hours                                       |
+ * +---------------------------------------------+ 0xffe0bffb
+ * | Day                                         |
+ * +---------------------------------------------+ 0xffe0bffc
+ * | Date                                        |
+ * +---------------------------------------------+ 0xffe0bffd
+ * | Month                                       |
+ * +---------------------------------------------+ 0xffe0bffe
+ * | Year (2 digits only)                        |
+ * +---------------------------------------------+ 0xffe0bfff
+ */
+#include <common.h>
+#include <rtc.h>
+#include "mousse.h"
+
+/*
+ * Imported from mousse.h:
+ *
+ *   TOD_REG_BASE		Base of m48t59y TOD registers
+ *   SYS_TOD_UNPROTECT()	Disable NVRAM write protect
+ *   SYS_TOD_PROTECT()		Re-enable NVRAM write protect
+ */
+
+#define YEAR		0xf
+#define MONTH		0xe
+#define DAY		0xd
+#define DAY_OF_WEEK	0xc
+#define HOUR		0xb
+#define MINUTE		0xa
+#define SECOND		0x9
+#define CONTROL		0x8
+#define WATCH		0x7
+#define INTCTL		0x6
+#define WD_DATE		0x5
+#define WD_HOUR		0x4
+#define WD_MIN		0x3
+#define WD_SEC		0x2
+#define _UNUSED		0x1
+#define FLAGS		0x0
+
+#define M48_ADDR	((volatile unsigned char *) TOD_REG_BASE)
+
+int m48_tod_init(void)
+{
+    SYS_TOD_UNPROTECT();
+
+    M48_ADDR[CONTROL] = 0;
+    M48_ADDR[WATCH] = 0;
+    M48_ADDR[INTCTL] = 0;
+
+    /*
+     * If the oscillator is currently stopped (as on a new part shipped
+     * from the factory), start it running.
+     *
+     * Here is an example of the TOD bytes on a brand new M48T59Y part:
+     *		00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01
+     */
+
+    if (M48_ADDR[SECOND] & 0x80)
+	M48_ADDR[SECOND] = 0;
+
+    /* Is battery low */
+    if ( M48_ADDR[FLAGS] & 0x10) {
+	 printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n");
+    }
+
+    SYS_TOD_PROTECT();
+
+    return 0;
+}
+
+/*
+ * m48_tod_set
+ */
+
+static int to_bcd(int value)
+{
+    return value / 10 * 16 + value % 10;
+}
+
+static int from_bcd(int value)
+{
+    return value / 16 * 10 + value % 16;
+}
+
+static int day_of_week(int y, int m, int d)	/* 0-6 ==> Sun-Sat */
+{
+    static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4};
+    y -= m < 3;
+    return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7;
+}
+
+/*
+ * Note: the TOD should store the current GMT
+ */
+
+int m48_tod_set(int year,		/* 1980-2079 */
+		int month,		/* 01-12 */
+		int day,		/* 01-31 */
+		int hour,		/* 00-23 */
+		int minute,		/* 00-59 */
+		int second)		/* 00-59 */
+
+{
+    SYS_TOD_UNPROTECT();
+
+    M48_ADDR[CONTROL] |= 0x80;	/* Set WRITE bit */
+
+    M48_ADDR[YEAR] = to_bcd(year % 100);
+    M48_ADDR[MONTH] = to_bcd(month);
+    M48_ADDR[DAY] = to_bcd(day);
+    M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1;
+    M48_ADDR[HOUR] = to_bcd(hour);
+    M48_ADDR[MINUTE] = to_bcd(minute);
+    M48_ADDR[SECOND] = to_bcd(second);
+
+    M48_ADDR[CONTROL] &= ~0x80;	/* Clear WRITE bit */
+
+    SYS_TOD_PROTECT();
+
+    return 0;
+}
+
+/*
+ * Note: the TOD should store the current GMT
+ */
+
+int m48_tod_get(int *year,		/* 1980-2079 */
+		int *month,		/* 01-12 */
+		int *day,		/* 01-31 */
+		int *hour,		/* 00-23 */
+		int *minute,		/* 00-59 */
+		int *second)		/* 00-59 */
+{
+    int y;
+
+    SYS_TOD_UNPROTECT();
+
+    M48_ADDR[CONTROL] |= 0x40;	/* Set READ bit */
+
+    y = from_bcd(M48_ADDR[YEAR]);
+    *year = y < 80 ? 2000 + y : 1900 + y;
+    *month = from_bcd(M48_ADDR[MONTH]);
+    *day = from_bcd(M48_ADDR[DAY]);
+    /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */
+    *hour = from_bcd(M48_ADDR[HOUR]);
+    *minute = from_bcd(M48_ADDR[MINUTE]);
+    *second = from_bcd(M48_ADDR[SECOND] & 0x7f);
+
+    M48_ADDR[CONTROL] &= ~0x40;	/* Clear READ bit */
+
+    SYS_TOD_PROTECT();
+
+    return 0;
+}
+
+int m48_tod_get_second(void)
+{
+    return from_bcd(M48_ADDR[SECOND] & 0x7f);
+}
+
+/*
+ * Watchdog function
+ *
+ *  If usec is 0, the watchdog timer is disarmed.
+ *
+ *  If usec is non-zero, the watchdog timer is armed (or re-armed) for
+ *    approximately usec microseconds (if the exact requested usec is
+ *    not supported by the chip, the next higher available value is used).
+ *
+ *  Minimum watchdog timeout = 62500 usec
+ *  Maximum watchdog timeout = 124 sec (124000000 usec)
+ */
+
+void m48_watchdog_arm(int usec)
+{
+    int		mpy, res;
+
+    SYS_TOD_UNPROTECT();
+
+    if (usec == 0) {
+	res = 0;
+	mpy = 0;
+    } else if (usec < 2000000) {	/* Resolution: 1/16s if below 2s */
+	res = 0;
+	mpy = (usec + 62499) / 62500;
+    } else if (usec < 8000000) {	/* Resolution: 1/4s if below 8s */
+	res = 1;
+	mpy = (usec + 249999) / 250000;
+    } else if (usec < 32000000) {	/* Resolution: 1s if below 32s */
+	res = 2;
+	mpy = (usec + 999999) / 1000000;
+    } else {				/* Resolution: 4s up to 124s */
+	res = 3;
+	mpy = (usec + 3999999) / 4000000;
+	if (mpy > 31)
+	    mpy = 31;
+    }
+
+    M48_ADDR[WATCH] = (0x80 |		/* Steer to RST signal (IRQ = N/C) */
+		       mpy << 2 |
+		       res);
+
+    SYS_TOD_PROTECT();
+}
+
+/*
+ * U-Boot RTC support.
+ */
+int
+rtc_get( struct rtc_time *tmp )
+{
+	m48_tod_get(&tmp->tm_year,
+		    &tmp->tm_mon,
+		    &tmp->tm_mday,
+		    &tmp->tm_hour,
+		    &tmp->tm_min,
+		    &tmp->tm_sec);
+	tmp->tm_yday = 0;
+	tmp->tm_isdst= 0;
+
+#ifdef RTC_DEBUG
+	printf( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
+#endif
+
+	return 0;
+}
+
+int rtc_set( struct rtc_time *tmp )
+{
+	m48_tod_set(tmp->tm_year,		/* 1980-2079 */
+		    tmp->tm_mon,		/* 01-12 */
+		    tmp->tm_mday,              /* 01-31 */
+		    tmp->tm_hour,		/* 00-23 */
+		    tmp->tm_min,		/* 00-59 */
+		    tmp->tm_sec);		/* 00-59 */
+
+#ifdef RTC_DEBUG
+	printf( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+#endif
+
+	return 0;
+}
+
+void
+rtc_reset (void)
+{
+  m48_tod_init();
+}
diff --git a/u-boot/board/mousse/m48t59y.h b/u-boot/board/mousse/m48t59y.h
new file mode 100644
index 0000000..717300d
--- /dev/null
+++ b/u-boot/board/mousse/m48t59y.h
@@ -0,0 +1,57 @@
+/*
+ * SGS M48-T59Y TOD/NVRAM Driver
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
+ *
+ * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __M48_T59_Y_H
+#define __M48_T59_Y_H
+
+/*
+ * M48 T59Y -Timekeeping Battery backed SRAM.
+ */
+
+int m48_tod_init(void);
+
+int m48_tod_set(int year,
+		int month,
+		int day,
+		int hour,
+		int minute,
+		int second);
+
+int m48_tod_get(int *year,
+		int *month,
+		int *day,
+		int *hour,
+		int *minute,
+		int *second);
+
+int m48_tod_get_second(void);
+
+void m48_watchdog_arm(int usec);
+
+#endif /*!__M48_T59_Y_H */
diff --git a/u-boot/board/mousse/mousse.c b/u-boot/board/mousse/mousse.c
new file mode 100644
index 0000000..bd8d1c6
--- /dev/null
+++ b/u-boot/board/mousse/mousse.c
@@ -0,0 +1,93 @@
+/*
+ * MOUSSE Board Support
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty, jfd@cs.stanford.edu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <timestamp.h>
+
+#include "mousse.h"
+#include "m48t59y.h"
+#include <pci.h>
+
+
+int checkboard (void)
+{
+	ulong busfreq = get_bus_freq (0);
+	char buf[32];
+
+	puts ("Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)\n");
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
+	printf ("MPLD:  Revision %d\n", SYS_REVID_GET ());
+	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
+
+	return 0;
+}
+
+int checkflash (void)
+{
+	printf ("checkflash\n");
+	flash_init ();
+	return 0;
+}
+
+phys_size_t initdram (int board_type)
+{
+	return CONFIG_SYS_RAM_SIZE;
+}
+
+
+void get_tod (void)
+{
+	int year, month, day, hour, minute, second;
+
+	m48_tod_get (&year, &month, &day, &hour, &minute, &second);
+
+	printf ("  Current date/time: %d/%d/%d %d:%d:%d \n",
+		month, day, year, hour, minute, second);
+
+}
+
+/*
+ * EPIC, PCI, and I/O devices.
+ * Initialize Mousse Platform, probe for PCI devices,
+ * Query configuration parameters if not set.
+ */
+int misc_init_f (void)
+{
+	m48_tod_init ();	/* Init SGS M48T59Y TOD/NVRAM */
+	printf ("RTC:   M48T589 TOD/NVRAM (%d) bytes\n", TOD_NVRAM_SIZE);
+	get_tod ();
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/u-boot/board/mousse/mousse.h b/u-boot/board/mousse/mousse.h
new file mode 100644
index 0000000..10a0062
--- /dev/null
+++ b/u-boot/board/mousse/mousse.h
@@ -0,0 +1,259 @@
+/*
+ * MOUSSE/MPC8240 Board definitions.
+ * For more info, see http://www.vooha.com/
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty (jfd@cs.stanford.edu)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MOUSSE_H
+#define __MOUSSE_H
+
+/* System addresses */
+
+#define PCI_SPECIAL_BASE	0xfe000000
+#define PCI_SPECIAL_SIZE	0x01000000
+
+/* PORTX Device Addresses for Mousse */
+
+#define PORTX_DEV_BASE		0xff000000
+#define PORTX_DEV_SIZE		0x01000000
+
+#define ENET_DEV_BASE		0x80000000
+
+#define PLD_REG_BASE		(PORTX_DEV_BASE | 0xe09000)
+#define PLD_REG(off)		(*(volatile unsigned char *) \
+				 (PLD_REG_BASE + (off)))
+
+#define PLD_REVID_B1		0x7f
+#define PLD_REVID_B2		0x01
+
+/* MPLD */
+#define SYS_HARD_RESET()	{ for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
+#define SYS_REVID_GET()		((int) PLD_REG(0) & 0x7f)
+#define SYS_LED_OFF()		(PLD_REG(1) |= 0x80)
+#define SYS_LED_ON()		(PLD_REG(1) &= ~0x80)
+#define SYS_WATCHDOG_IRQ3()	(PLD_REG(2) |= 0x80)
+#define SYS_WATCHDOG_RESET()	(PLD_REG(2) &= ~0x80)
+#define SYS_TOD_PROTECT()	(PLD_REG(3) |= 0x80)
+#define SYS_TOD_UNPROTECT()	(PLD_REG(3) &= ~0x80)
+
+/* SGS M48T59Y */
+#define TOD_BASE		(PORTX_DEV_BASE | 0xe0a000)
+#define TOD_REG_BASE		(TOD_BASE | 0x1ff0)
+#define TOD_NVRAM_BASE		TOD_BASE
+#define TOD_NVRAM_SIZE		0x1ff0
+#define TOD_NVRAM_LIMIT		(TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
+
+/* NS16552 SIO */
+#define SERIAL_BASE(_x)		(PORTX_DEV_BASE | 0xe08000 | ((_x) ? 0 : 0x80))
+#define N_SIO_CHANNELS		2
+#define N_COM_PORTS		N_SIO_CHANNELS
+
+/*
+ * On-board Dec21143 PCI Ethernet
+ * Note: The PCI MBAR chosen here was used from MPC8240UM which states
+ * that PCI memory is at: 0x80000 - 0xFDFFFFFF, if AMBOR[CPU_FD_ALIAS]
+ * is set, then PCI memory maps 1-1 with this address range in the
+ * correct byte order.
+ */
+#define PCI_ENET_IOADDR		0x80000000
+#define PCI_ENET_MEMADDR	0x80000000
+
+/*
+ * Flash Memory Layout
+ *
+ *    2 MB Flash Bank 0 runs in 8-bit mode.  In Flash Bank 0, the 32 kB
+ *    sector SA3 is obscured by the 32 kB serial/TOD access space, and
+ *    the 64 kB sectors SA19-SA26 are obscured by the 512 kB PLCC
+ *    containing the fixed boot ROM.  (If the 512 kB PLCC is
+ *    deconfigured by jumper, this window to Flash Bank 0 becomes
+ *    visible, but it still contains the fixed boot code and should be
+ *    considered read-only).  Flash Bank 0 sectors SA0 (16 kB), SA1 (8
+ *    kB), and SA2 (8 kB) are currently unused.
+ *
+ *    2 MB Flash Bank 1 runs in 16-bit mode.  Flash Bank 1 is fully
+ *    usable, but it's a 16-bit wide device on a 64-bit bus.  Therefore
+ *    16-bit words only exist at addresses that are multiples of 8.  All
+ *    PROM data and control addresses must be multiplied by 8.
+ *
+ *    See flashMap.c for description of flash filesystem layout.
+ */
+
+/*
+ * FLASH memory address space: 8-bit wide FLASH memory spaces.
+ */
+#define FLASH0_SEG0_START	0xffe00000	 /* Baby 32Kb segment */
+#define FLASH0_SEG0_END		0xffe07fff	 /* 16 kB + 8 kB + 8 kB */
+#define FLASH0_SEG0_SIZE	0x00008000	 /*   (sectors SA0-SA2) */
+
+#define FLASH0_SEG1_START	0xffe10000	 /* 1MB - 64Kb FLASH0 seg */
+#define FLASH0_SEG1_END		0xffefffff	 /* 960 kB */
+#define FLASH0_SEG1_SIZE	0x000f0000
+
+#define FLASH0_SEG2_START	0xfff00000	 /* Boot Loader stored here */
+#define FLASH0_SEG2_END		0xfff7ffff	 /* 512 kB FLASH0/PLCC seg */
+#define FLASH0_SEG2_SIZE	0x00080000
+
+#define FLASH0_SEG3_START	0xfff80000	 /* 512 kB FLASH0 seg */
+#define FLASH0_SEG3_END		0xffffffff
+#define FLASH0_SEG3_SIZE	0x00080000
+
+/* Where Kahlua starts */
+#define FLASH_RESET_VECT	0xfff00100
+
+/*
+ * CHRP / PREP (MAP A/B) definitions.
+ */
+
+#define PREP_REG_ADDR		0x80000cf8	/* MPC107 Config, Map A */
+#define PREP_REG_DATA		0x80000cfc	/* MPC107 Config, Map A */
+/* MPC107 (MPC8240 internal EUMBBAR mapped) */
+#define CHRP_REG_ADDR		0xfec00000	/* MPC106 Config, Map B */
+#define CHRP_REG_DATA		0xfee00000	/* MPC106 Config, Map B */
+
+/*
+ * Mousse PCI IDSEL Assignments (Device Number)
+ */
+#define MOUSSE_IDSEL_ENET	13		/* On-board 21143 Ethernet */
+#define MOUSSE_IDSEL_LPCI	14		/* On-board PCI slot */
+#define MOUSSE_IDSEL_82371	15		/* That other thing */
+#define MOUSSE_IDSEL_CPCI2	31		/* CPCI slot 2 */
+#define MOUSSE_IDSEL_CPCI3	30		/* CPCI slot 3 */
+#define MOUSSE_IDSEL_CPCI4	29		/* CPCI slot 4 */
+#define MOUSSE_IDSEL_CPCI5	28		/* CPCI slot 5 */
+#define MOUSSE_IDSEL_CPCI6	27		/* CPCI slot 6 */
+
+/*
+ * Mousse Interrupt Mapping:
+ *
+ *	IRQ1	Enet (intA|intB|intC|intD)
+ *	IRQ2	CPCI intA (See below)
+ *	IRQ3	Local PCI slot intA|intB|intC|intD
+ *	IRQ4	COM1 Serial port (Actually higher addressed port on duart)
+ *
+ * PCI Interrupt Mapping in CPCI chassis:
+ *
+ *		   |	       CPCI Slot
+ *		   | 1 (CPU)	2	3	4	5	6
+ *	-----------+--------+-------+-------+-------+-------+-------+
+ *	  intA	   |	X		X		X
+ *	  intB	   |		X		X		X
+ *	  intC	   |	X		X		X
+ *	  intD	   |		X		X		X
+ */
+
+
+#define EPIC_VECTOR_EXT0	0
+#define EPIC_VECTOR_EXT1	1
+#define EPIC_VECTOR_EXT2	2
+#define EPIC_VECTOR_EXT3	3
+#define EPIC_VECTOR_EXT4	4
+#define EPIC_VECTOR_TM0		16
+#define EPIC_VECTOR_TM1		17
+#define EPIC_VECTOR_TM2		18
+#define EPIC_VECTOR_TM3		19
+#define EPIC_VECTOR_I2C		20
+#define EPIC_VECTOR_DMA0	21
+#define EPIC_VECTOR_DMA1	22
+#define EPIC_VECTOR_I2O		23
+
+
+#define INT_VEC_IRQ0		0
+#define INT_NUM_IRQ0		INT_VEC_IRQ0
+#define MOUSSE_IRQ_ENET		EPIC_VECTOR_EXT1	/* Hardwired */
+#define MOUSSE_IRQ_CPCI		EPIC_VECTOR_EXT2	/* Hardwired */
+#define MOUSSE_IRQ_LPCI		EPIC_VECTOR_EXT3	/* Hardwired */
+#define MOUSSE_IRQ_DUART	EPIC_VECTOR_EXT4	/* Hardwired */
+
+/* Onboard DEC 21143 Ethernet */
+#define PCI_ENET_MEMADDR	0x80000000
+#define PCI_ENET_IOADDR		0x80000000
+
+/* Some other PCI device */
+#define PCI_SLOT_MEMADDR	0x81000000
+#define PCI_SLOT_IOADDR		0x81000000
+
+/* Promise ATA66 PCI Device (ATA controller) */
+#define PROMISE_MBAR0  0xa0000000
+#define PROMISE_MBAR1  (PROMISE_MBAR0 + 0x1000)
+#define PROMISE_MBAR2  (PROMISE_MBAR0 + 0x2000)
+#define PROMISE_MBAR3  (PROMISE_MBAR0 + 0x3000)
+#define PROMISE_MBAR4  (PROMISE_MBAR0 + 0x4000)
+#define PROMISE_MBAR5  (PROMISE_MBAR0 + 0x5000)
+
+/* ATA/66 Controller offsets */
+#define CONFIG_SYS_ATA_BASE_ADDR     PROMISE_MBAR0
+#define CONFIG_SYS_IDE_MAXBUS	       2 /* ide0/ide1 */
+#define CONFIG_SYS_IDE_MAXDEVICE      2 /* 2 drives per controller */
+#define CONFIG_SYS_ATA_IDE0_OFFSET    0
+#define CONFIG_SYS_ATA_IDE1_OFFSET    0x3000
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define CONFIG_SYS_ATA_DATA_OFFSET    0
+#define CONFIG_SYS_ATA_REG_OFFSET     0
+#define CONFIG_SYS_ATA_ALT_OFFSET    (0x1000)
+
+/*
+ * The constants ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, and RAM_LOW_ADRS
+ * are defined in config.h and Makefile.
+ * All definitions for these constants must be identical.
+ */
+#define ROM_BASE_ADRS		0xfff00000	/* base address of ROM */
+#define ROM_TEXT_ADRS		(ROM_BASE_ADRS+0x0100) /* with PC & SP */
+#define ROM_WARM_ADRS		(ROM_TEXT_ADRS+0x0004) /* warm reboot entry */
+#define ROM_SIZE		0x00080000	/* 512KB ROM space */
+#define RAM_LOW_ADRS		0x00010000   /* RAM address for vxWorks */
+#define RAM_HIGH_ADRS		0x00c00000   /* RAM address for bootrom */
+
+/*
+ *  NVRAM configuration
+ *  NVRAM is implemented via the SGS Thomson M48T59Y
+ *  64Kbit (8Kbx8) Timekeeper SRAM.
+ *  This 8KB NVRAM also has a TOD. See m48t59y.{h,c} for more information.
+ */
+
+#define NV_RAM_ADRS		TOD_NVRAM_BASE
+#define NV_RAM_INTRVL		1
+#define NV_RAM_WR_ENBL		SYS_TOD_UNPROTECT()
+#define NV_RAM_WR_DSBL		SYS_TOD_PROTECT()
+
+#define NV_OFF_BOOT0		0x0000	/* Boot string 0 (256b) */
+#define NV_OFF_BOOT1		0x0100	/* Boot string 1 (256b) */
+#define NV_OFF_BOOT2		0x0200	/* Boot string 2 (256b)*/
+#define NV_OFF_MACADDR		0x0400	/* 21143 MAC address (6b) */
+#define NV_OFF_ACTIVEBOOT	0x0406	/* Active boot string, 0 to 2 (1b) */
+#define NV_OFF_UNUSED1		0x0407	/* Unused (1b) */
+#define NV_OFF_BINDFIX		0x0408	/* See sysLib.c:sysBindFix() (1b) */
+#define NV_OFF_UNUSED2		0x0409	/* Unused (7b) */
+#define NV_OFF_TIMEZONE		0x0410	/* TIMEZONE env var (64b) */
+#define NV_OFF_VXWORKS_END	0x07FF	/* 2047 VxWorks Total */
+#define NV_OFF_U_BOOT		0x0800	/* 2048 U-Boot boot-loader */
+#define NV_OFF_U_BOOT_ADDR	(TOD_BASE + NV_OFF_U_BOOT) /* sysaddr*/
+#define NV_U_BOOT_ENV_SIZE	2048	/* 2K - U-Boot Total */
+#define NV_OFF__next_free	(NV_U_BOOT_ENVSIZE +1)
+#define NV_RAM_SIZE		8176	/* NVRAM End */
+
+#endif /* __MOUSSE_H */
diff --git a/u-boot/board/mousse/pci.c b/u-boot/board/mousse/pci.c
new file mode 100644
index 0000000..4f39398
--- /dev/null
+++ b/u-boot/board/mousse/pci.c
@@ -0,0 +1,283 @@
+/*
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty (jfd@cs.stanford.edu)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI Configuration space access support for MPC824x/MPC107 PCI Bridge
+ */
+#include <common.h>
+#include <mpc824x.h>
+#include <pci.h>
+
+#include "mousse.h"
+
+/*
+ * Promise ATA/66 support.
+ */
+#define XFER_PIO_4	0x0C	/* 0000|1100 */
+#define XFER_PIO_3	0x0B	/* 0000|1011 */
+#define XFER_PIO_2	0x0A	/* 0000|1010 */
+#define XFER_PIO_1	0x09	/* 0000|1001 */
+#define XFER_PIO_0	0x08	/* 0000|1000 */
+#define XFER_PIO_SLOW	0x00	/* 0000|0000 */
+
+/* Promise Regs */
+#define REG_A		0x01
+#define REG_B		0x02
+#define REG_C		0x04
+#define REG_D		0x08
+
+void
+pdc202xx_decode_registers (unsigned char registers, unsigned char value)
+{
+	unsigned char	bit = 0, bit1 = 0, bit2 = 0;
+	switch(registers) {
+		case REG_A:
+			bit2 = 0;
+			printf("  A Register ");
+			if (value & 0x80) printf("SYNC_IN ");
+			if (value & 0x40) printf("ERRDY_EN ");
+			if (value & 0x20) printf("IORDY_EN ");
+			if (value & 0x10) printf("PREFETCH_EN ");
+			if (value & 0x08) { printf("PA3 ");bit2 |= 0x08; }
+			if (value & 0x04) { printf("PA2 ");bit2 |= 0x04; }
+			if (value & 0x02) { printf("PA1 ");bit2 |= 0x02; }
+			if (value & 0x01) { printf("PA0 ");bit2 |= 0x01; }
+			printf("PIO(A) = %d ", bit2);
+			break;
+		case REG_B:
+			bit1 = 0;bit2 = 0;
+			printf("  B Register ");
+			if (value & 0x80) { printf("MB2 ");bit1 |= 0x80; }
+			if (value & 0x40) { printf("MB1 ");bit1 |= 0x40; }
+			if (value & 0x20) { printf("MB0 ");bit1 |= 0x20; }
+			printf("DMA(B) = %d ", bit1 >> 5);
+			if (value & 0x10) printf("PIO_FORCED/PB4 ");
+			if (value & 0x08) { printf("PB3 ");bit2 |= 0x08; }
+			if (value & 0x04) { printf("PB2 ");bit2 |= 0x04; }
+			if (value & 0x02) { printf("PB1 ");bit2 |= 0x02; }
+			if (value & 0x01) { printf("PB0 ");bit2 |= 0x01; }
+			printf("PIO(B) = %d ", bit2);
+			break;
+		case REG_C:
+			bit2 = 0;
+			printf("  C Register ");
+			if (value & 0x80) printf("DMARQp ");
+			if (value & 0x40) printf("IORDYp ");
+			if (value & 0x20) printf("DMAR_EN ");
+			if (value & 0x10) printf("DMAW_EN ");
+
+			if (value & 0x08) { printf("MC3 ");bit2 |= 0x08; }
+			if (value & 0x04) { printf("MC2 ");bit2 |= 0x04; }
+			if (value & 0x02) { printf("MC1 ");bit2 |= 0x02; }
+			if (value & 0x01) { printf("MC0 ");bit2 |= 0x01; }
+			printf("DMA(C) = %d ", bit2);
+			break;
+		case REG_D:
+			printf("  D Register ");
+			break;
+		default:
+			return;
+	}
+	printf("\n        %s ", (registers & REG_D) ? "DP" :
+				(registers & REG_C) ? "CP" :
+				(registers & REG_B) ? "BP" :
+				(registers & REG_A) ? "AP" : "ERROR");
+	for (bit=128;bit>0;bit/=2)
+		printf("%s", (value & bit) ? "1" : "0");
+	printf("\n");
+}
+
+/*
+ * Promise ATA/66 Support: configure Promise ATA66 card in specified mode.
+ */
+int
+pdc202xx_tune_chipset (pci_dev_t dev, int drive, unsigned char speed)
+{
+	unsigned short		drive_conf;
+	int			err = 0;
+	unsigned char			drive_pci, AP, BP, CP, DP;
+	unsigned char			TA = 0, TB = 0;
+
+	switch (drive) {
+		case 0: drive_pci = 0x60; break;
+		case 1: drive_pci = 0x64; break;
+		case 2: drive_pci = 0x68; break;
+		case 3: drive_pci = 0x6c; break;
+		default: return -1;
+	}
+
+	pci_read_config_word(dev, drive_pci, &drive_conf);
+	pci_read_config_byte(dev, (drive_pci), &AP);
+	pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
+	pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
+	pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
+
+	if ((AP & 0x0F) || (BP & 0x07)) {
+	  /* clear PIO modes of lower 8421 bits of A Register */
+	  pci_write_config_byte(dev, (drive_pci), AP & ~0x0F);
+	  pci_read_config_byte(dev, (drive_pci), &AP);
+
+	  /* clear PIO modes of lower 421 bits of B Register */
+	  pci_write_config_byte(dev, (drive_pci)|0x01, BP & ~0x07);
+	  pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
+
+	  pci_read_config_byte(dev, (drive_pci), &AP);
+	  pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
+	}
+
+	pci_read_config_byte(dev, (drive_pci), &AP);
+	pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
+	pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
+
+	switch(speed) {
+		case XFER_PIO_4:	TA = 0x01; TB = 0x04; break;
+		case XFER_PIO_3:	TA = 0x02; TB = 0x06; break;
+		case XFER_PIO_2:	TA = 0x03; TB = 0x08; break;
+		case XFER_PIO_1:	TA = 0x05; TB = 0x0C; break;
+		case XFER_PIO_0:
+		default:		TA = 0x09; TB = 0x13; break;
+	}
+
+	pci_write_config_byte(dev, (drive_pci), AP|TA);
+	pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB);
+
+	pci_read_config_byte(dev, (drive_pci), &AP);
+	pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
+	pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
+	pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
+
+
+#ifdef PDC202XX_DEBUG
+	pdc202xx_decode_registers(REG_A, AP);
+	pdc202xx_decode_registers(REG_B, BP);
+	pdc202xx_decode_registers(REG_C, CP);
+	pdc202xx_decode_registers(REG_D, DP);
+#endif
+	return err;
+}
+/*
+ * Show/Init PCI devices on the specified bus number.
+ */
+
+void pci_mousse_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned int line;
+
+	switch(PCI_DEV(dev)) {
+	case 0x0d:
+		line = 0x00000101;
+		break;
+
+	case 0x0e:
+	default:
+		line = 0x00000303;
+		break;
+	}
+
+	pci_write_config_dword(dev, PCI_INTERRUPT_LINE, line);
+}
+
+void pci_mousse_setup_pdc202xx(struct pci_controller *hose, pci_dev_t dev,
+			       struct pci_config_table *_)
+{
+	unsigned short vendorId;
+	unsigned int mbar0, cmd;
+	int bar, a;
+
+	pci_read_config_word(dev, PCI_VENDOR_ID, &vendorId);
+
+	if(vendorId == PCI_VENDOR_ID_PROMISE || vendorId == PCI_VENDOR_ID_CMD){
+		/* PDC 202xx card is handled differently, it is a bootable
+		 * device and needs all 5 MBAR's configured
+		 */
+		for(bar = 0; bar < 5; bar++){
+			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, &mbar0);
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, ~0);
+			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, &mbar0);
+#ifdef DEBUG
+			printf("  ATA_bar[%d] = %dbytes\n", bar,
+			       ~(mbar0 & PCI_BASE_ADDRESS_MEM_MASK) + 1);
+#endif
+		}
+
+		/* Program all BAR's */
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, PROMISE_MBAR0);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, PROMISE_MBAR1);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_2,	PROMISE_MBAR2);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_3,	PROMISE_MBAR3);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_4,	PROMISE_MBAR4);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_5,	PROMISE_MBAR5);
+
+		for(bar = 0; bar < 5; bar++){
+			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, &mbar0);
+#ifdef DEBUG
+			printf("  ATA_bar[%d]@0x%x\n", bar, mbar0);
+#endif
+		}
+
+		/* Enable ROM Expansion base */
+		pci_write_config_dword(dev, PCI_ROM_ADDRESS, PROMISE_MBAR5|1);
+
+		/* Io enable, Memory enable, master enable */
+		pci_read_config_dword(dev, PCI_COMMAND, &cmd);
+		cmd &= ~0xffff0000;
+		cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+		pci_write_config_dword(dev, PCI_COMMAND, cmd);
+
+		/* Breath some life into the controller */
+		for( a = 0; a < 4; a++)
+			pdc202xx_tune_chipset(dev, a, XFER_PIO_0);
+	}
+}
+
+static struct pci_config_table pci_sandpoint_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 0x0e, 0x00,
+	  pci_mousse_setup_pdc202xx },
+#ifndef CONFIG_PCI_PNP
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 0x0d, 0x00,
+	  pci_cfgfunc_config_device, {PCI_ENET_IOADDR,
+				      PCI_ENET_MEMADDR,
+				      PCI_COMMAND_MEMORY |
+				      PCI_COMMAND_MASTER}},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, {PCI_SLOT_IOADDR,
+				      PCI_SLOT_MEMADDR,
+				      PCI_COMMAND_MEMORY |
+				      PCI_COMMAND_MASTER}},
+#endif
+	{ }
+};
+
+struct pci_controller hose = {
+	config_table: pci_sandpoint_config_table,
+	fixup_irq: pci_mousse_fixup_irq,
+};
+
+void pci_init_board(void)
+{
+	pci_mpc824x_init(&hose);
+}
diff --git a/u-boot/board/mousse/u-boot.lds b/u-boot/board/mousse/u-boot.lds
new file mode 100644
index 0000000..4cfb95c
--- /dev/null
+++ b/u-boot/board/mousse/u-boot.lds
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .text      :
+  {
+    arch/powerpc/cpu/mpc824x/start.o	(.text*)
+    *(.text*)
+    . = ALIGN(16);
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    KEEP(*(.got))
+    _GOT2_TABLE_ = .;
+    KEEP(*(.got2))
+    _FIXUP_TABLE_ = .;
+    KEEP(*(.fixup))
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data*)
+    *(.sdata*)
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.bss*)
+   *(.sbss*)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/u-boot/board/mousse/u-boot.lds.ram b/u-boot/board/mousse/u-boot.lds.ram
new file mode 100644
index 0000000..449d064
--- /dev/null
+++ b/u-boot/board/mousse/u-boot.lds.ram
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems Ltd. robt@flyingpig.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+
+MEMORY {
+	ram  (!rx) : org = 0x00000000 , LENGTH = 8M
+	code (!rx) : org = 0x00002000 , LENGTH = (4M - 0x2000)
+	rom   (rx) : org = 0xfff00000 , LENGTH = 512K
+}
+
+SECTIONS
+{
+  _f_init = .;
+  PROVIDE(_f_init = .);
+  _f_init_rom = .;
+  PROVIDE(_f_init_rom = .);
+
+  .init : {
+      arch/powerpc/cpu/mpc824x/start.o	(.text)
+      *(.init)
+  } > ram
+  _init_size = SIZEOF(.init);
+  PROVIDE(_init_size = SIZEOF(.init));
+
+  ENTRY(_start)
+
+/*  _ftext = .;
+  _ftext_rom = .;
+  _text_size = SIZEOF(.text);
+ */
+  .text : {
+      *(.text)
+      *(.got1)
+      } > ram
+  .rodata : { *(.rodata) } > ram
+  .dtors : { *(.dtors) } > ram
+  .data : { *(.data) } > ram
+  .sdata : { *(.sdata) } > ram
+  .sdata2 : { *(.sdata2)
+      *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+    } > ram
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .sbss : { *(.sbss) } > ram
+  .sbss2 : { *(.sbss2) } > ram
+  .bss : { *(.bss) } > ram
+  .debug : { *(.debug) } > ram
+  .line : { *(.line) } > ram
+  .symtab : { *(.symtab) } > ram
+  .shrstrtab : { *(.shstrtab) } > ram
+  .strtab : { *(.strtab) } > ram
+ /* .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  } > ram
+  */
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+   __start___ex_table = .;
+    __ex_table : { *(__ex_table) } > ram
+    __stop___ex_table = .;
+
+
+  .ppcenv	:
+  {
+    common/env_embedded.o (.ppcenv)
+  } > ram
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/u-boot/board/mousse/u-boot.lds.rom b/u-boot/board/mousse/u-boot.lds.rom
new file mode 100644
index 0000000..4f42b32
--- /dev/null
+++ b/u-boot/board/mousse/u-boot.lds.rom
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    arch/powerpc/cpu/mpc824x/start.o	(.text)
+	 common/board.o (.text)
+    arch/powerpc/lib/ppcstring.o	(.text)
+    lib/vsprintf.o	(.text)
+    lib/crc32.o		(.text)
+    lib/zlib.o		(.text)
+
+		. = env_offset;
+    common/env_embedded.o (.text)
+
+		*(.text)
+
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}