added boot script files to repository

4 files changed, 590 insertions, 0 deletions

diff --git a/u-boot/board/sx1/Makefile b/u-boot/board/sx1/Makefile
new file mode 100644
index 0000000..27d85b0
--- /dev/null
+++ b/u-boot/board/sx1/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2004-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= sx1.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/u-boot/board/sx1/config.mk b/u-boot/board/sx1/config.mk
new file mode 100644
index 0000000..441bea2
--- /dev/null
+++ b/u-boot/board/sx1/config.mk
@@ -0,0 +1,19 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+#
+# SX1 board with OMAP1510 (ARM925T) cpu
+# see http://www.ti.com/ for more information on Texas Insturments
+#
+# SX1 has 1 bank of 256 MB SDRAM
+# Physical Address:
+# 1000'0000 to 2000'0000
+#
+#
+# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000  (mem base + reserved)
+#
+# we load ourself to 1108'0000
+#
+#
+
+CONFIG_SYS_TEXT_BASE = 0x11080000
diff --git a/u-boot/board/sx1/lowlevel_init.S b/u-boot/board/sx1/lowlevel_init.S
new file mode 100644
index 0000000..c1a811a
--- /dev/null
+++ b/u-boot/board/sx1/lowlevel_init.S
@@ -0,0 +1,397 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ *
+ * -- Some bits of code used from rrload's head_OMAP1510.s --
+ * Copyright (C) 2002 RidgeRun, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1510)
+#include <./configs/omap1510.h>
+#endif
+
+#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
+
+
+_TEXT_BASE:
+	.word	CONFIG_SYS_TEXT_BASE	 /* sdram load addr from config.mk */
+
+.globl lowlevel_init
+lowlevel_init:
+
+	/*
+	 * Configure 1510 pins functions to match our board.
+	 */
+	ldr	r0, REG_PULL_DWN_CTRL_0
+	ldr	r1, VAL_PULL_DWN_CTRL_0
+	str	r1, [r0]
+	ldr	r0, REG_PULL_DWN_CTRL_1
+	ldr	r1, VAL_PULL_DWN_CTRL_1
+	str	r1, [r0]
+	ldr	r0, REG_PULL_DWN_CTRL_2
+	ldr	r1, VAL_PULL_DWN_CTRL_2
+	str	r1, [r0]
+	ldr	r0, REG_PULL_DWN_CTRL_3
+	ldr	r1, VAL_PULL_DWN_CTRL_3
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_4
+	ldr	r1, VAL_FUNC_MUX_CTRL_4
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_5
+	ldr	r1, VAL_FUNC_MUX_CTRL_5
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_6
+	ldr	r1, VAL_FUNC_MUX_CTRL_6
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_7
+	ldr	r1, VAL_FUNC_MUX_CTRL_7
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_8
+	ldr	r1, VAL_FUNC_MUX_CTRL_8
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_9
+	ldr	r1, VAL_FUNC_MUX_CTRL_9
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_A
+	ldr	r1, VAL_FUNC_MUX_CTRL_A
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_B
+	ldr	r1, VAL_FUNC_MUX_CTRL_B
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_C
+	ldr	r1, VAL_FUNC_MUX_CTRL_C
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_D
+	ldr	r1, VAL_FUNC_MUX_CTRL_D
+	str	r1, [r0]
+	ldr	r0, REG_VOLTAGE_CTRL_0
+	ldr	r1, VAL_VOLTAGE_CTRL_0
+	str	r1, [r0]
+	ldr	r0, REG_TEST_DBG_CTRL_0
+	ldr	r1, VAL_TEST_DBG_CTRL_0
+	str	r1, [r0]
+	ldr	r0, REG_MOD_CONF_CTRL_0
+	ldr	r1, VAL_MOD_CONF_CTRL_0
+	str	r1, [r0]
+
+	/* Move to 1510 mode */
+	ldr	r0, REG_COMP_MODE_CTRL_0
+	ldr	r1, VAL_COMP_MODE_CTRL_0
+	str	r1, [r0]
+
+	/* Set up Traffic Ctlr*/
+	ldr r0, REG_TC_IMIF_PRIO
+	mov r1, #0x0
+	str r1, [r0]
+	ldr r0, REG_TC_EMIFS_PRIO
+	str r1, [r0]
+	ldr r0, REG_TC_EMIFF_PRIO
+	str r1, [r0]
+
+	ldr r0, REG_TC_EMIFS_CONFIG
+	ldr r1, [r0]
+	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
+	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
+	str r1, [r0]	    /* EMIFS GlB Configuration. (value 0x12 most likely) */
+
+	ldr r0, _GPIO_PIN_CONTROL_REG
+	mov r1,#0
+	orr r1, r1, #0x0001 /* M_PCM_SYNC */
+	orr r1, r1, #0x4000 /* IPC_ACTIVE */
+	strh r1,[r0]
+
+	ldr r0, _GPIO_DIR_CONTROL_REG
+	mov r1,#0
+	bic r1, r1, #0x0001 /* M_PCM_SYNC */
+	bic r1, r1, #0x4000 /* IPC_ACTIVE */
+	strh r1,[r0]
+
+	ldr r0, _GPIO_DATA_OUTPUT_REG
+	mov r1,#0
+	bic r1, r1, #0x0001 /* M_PCM_SYNC */
+	orr r1, r1, #0x4000 /* IPC_ACTIVE */
+	strh r1,[r0]
+
+	/* Setup some clock domains */
+	ldr r1, =OMAP1510_CLKS
+	ldr r0, REG_ARM_IDLECT2
+	strh r1, [r0]  /* CLKM, Clock domain control. */
+
+	mov r1, #0x01  /* PER_EN bit */
+	ldr r0, REG_ARM_RSTCT2
+	strh r1, [r0]  /* CLKM; Peripheral reset. */
+
+	/* Set CLKM to Sync-Scalable  */
+	/* I supposidly need to enable the dsp clock before switching */
+	mov r1, #0x1000
+	ldr r0, REG_ARM_SYSST
+	strh r1, [r0]
+	mov r0, #0x400
+1:
+	subs r0, r0, #0x1   /* wait for any bubbles to finish */
+	bne 1b
+
+	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
+	ldr r0, REG_ARM_CKCTL
+	strh r1, [r0]
+
+	/* setup DPLL 1 */
+	ldr r1, VAL_DPLL1_CTL
+	ldr r0, REG_DPLL1_CTL
+	strh r1, [r0]
+	ands r1, r1, #0x10  /* Check if PLL is enabled. */
+	beq lock_end	    /* Do not look for lock if BYPASS selected */
+2:
+	ldrh r1, [r0]
+	ands r1, r1, #0x01  /* Check the LOCK bit. */
+	beq 2b		    /* ...loop until bit goes hi. */
+lock_end:
+
+	/* Set memory timings corresponding to the new clock speed */
+
+	/* Check execution location to determine current execution location
+	 * and branch to appropriate initialization code.
+	 */
+	mov r0, #0x10000000		    /* Load physical SDRAM base. */
+	mov r1, pc			    /* Get current execution location. */
+	cmp r1, r0			    /* Compare. */
+	bge skip_sdram			    /* Skip over EMIF-fast initialization if running from SDRAM. */
+
+	/*
+	 * Delay for SDRAM initialization.
+	 */
+	mov r3, #0x1800			       /* value should be checked */
+3:
+	subs r3, r3, #0x1		      /* Decrement count */
+	bne 3b
+
+	/*
+	 * Set SDRAM control values. Disable refresh before MRS command.
+	 */
+	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
+	bic r3, r0, #0xC		    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
+	orr r3, r3, #0x8000000		    /* (BIT27) Disable CLK when Power down or Self-Refresh */
+	orr r3, r3, #0x4000000		    /* BIT26 Power Down Enable */
+	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
+	str r3, [r2]			    /* Store the passed value with AR disabled. */
+
+	ldr r1, VAL_TC_EMIFF_MRS	    /* get MRS value */
+	ldr r2, REG_TC_EMIFF_MRS	    /* Point to MRS register. */
+	str r1, [r2]			    /* Store the passed value.*/
+
+	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
+	str r0, [r2]			    /* Store the passed value. */
+
+	/*
+	 * Delay for SDRAM initialization.
+	 */
+	mov r3, #0x1800
+4:
+	subs r3, r3, #1			    /* Decrement count. */
+	bne 4b
+
+skip_sdram:
+
+	/* slow interface */
+	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
+	ldr r0, REG_TC_EMIFS_CS0_CONFIG
+	str r1, [r0] /* Chip Select 0 */
+	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
+	ldr r0, REG_TC_EMIFS_CS1_CONFIG
+	str r1, [r0] /* Chip Select 1 */
+	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
+	ldr r0, REG_TC_EMIFS_CS2_CONFIG
+	str r1, [r0] /* Chip Select 2 */
+	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
+	ldr r0, REG_TC_EMIFS_CS3_CONFIG
+	str r1, [r0] /* Chip Select 3 */
+
+	/* back to arch calling code */
+	mov	pc, lr
+
+/* the literal pools origin */
+	.ltorg
+
+/* OMAP configuration registers */
+REG_FUNC_MUX_CTRL_0:		/* 32 bits */
+	.word 0xfffe1000
+REG_FUNC_MUX_CTRL_1:		/* 32 bits */
+	.word 0xfffe1004
+REG_FUNC_MUX_CTRL_2:		/* 32 bits */
+	.word 0xfffe1008
+REG_COMP_MODE_CTRL_0:		/* 32 bits */
+	.word 0xfffe100c
+REG_FUNC_MUX_CTRL_3:		/* 32 bits */
+	.word 0xfffe1010
+REG_FUNC_MUX_CTRL_4:		/* 32 bits */
+	.word 0xfffe1014
+REG_FUNC_MUX_CTRL_5:		/* 32 bits */
+	.word 0xfffe1018
+REG_FUNC_MUX_CTRL_6:		/* 32 bits */
+	.word 0xfffe101c
+REG_FUNC_MUX_CTRL_7:		/* 32 bits */
+	.word 0xfffe1020
+REG_FUNC_MUX_CTRL_8:		/* 32 bits */
+	.word 0xfffe1024
+REG_FUNC_MUX_CTRL_9:		/* 32 bits */
+	.word 0xfffe1028
+REG_FUNC_MUX_CTRL_A:		/* 32 bits */
+	.word 0xfffe102C
+REG_FUNC_MUX_CTRL_B:		/* 32 bits */
+	.word 0xfffe1030
+REG_FUNC_MUX_CTRL_C:		/* 32 bits */
+	.word 0xfffe1034
+REG_FUNC_MUX_CTRL_D:		/* 32 bits */
+	.word 0xfffe1038
+REG_PULL_DWN_CTRL_0:		/* 32 bits */
+	.word 0xfffe1040
+REG_PULL_DWN_CTRL_1:		/* 32 bits */
+	.word 0xfffe1044
+REG_PULL_DWN_CTRL_2:		/* 32 bits */
+	.word 0xfffe1048
+REG_PULL_DWN_CTRL_3:		/* 32 bits */
+	.word 0xfffe104c
+REG_VOLTAGE_CTRL_0:		/* 32 bits */
+	.word 0xfffe1060
+REG_TEST_DBG_CTRL_0:		/* 32 bits */
+	.word 0xfffe1070
+REG_MOD_CONF_CTRL_0:		/* 32 bits */
+	.word 0xfffe1080
+REG_TC_IMIF_PRIO:		/* 32 bits */
+	.word 0xfffecc00
+REG_TC_EMIFS_PRIO:		/* 32 bits */
+	.word 0xfffecc04
+REG_TC_EMIFF_PRIO:		/* 32 bits */
+	.word 0xfffecc08
+REG_TC_EMIFS_CONFIG:		/* 32 bits */
+	.word 0xfffecc0c
+REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
+	.word 0xfffecc10
+REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
+	.word 0xfffecc14
+REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
+	.word 0xfffecc18
+REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
+	.word 0xfffecc1c
+REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
+	.word 0xfffecc20
+REG_TC_EMIFF_MRS:		/* 32 bits */
+	.word 0xfffecc24
+/* MPU clock/reset/power mode control registers */
+REG_ARM_CKCTL:			/* 16 bits */
+	.word 0xfffece00
+REG_ARM_IDLECT2:		/* 16 bits */
+	.word 0xfffece08
+REG_ARM_RSTCT2:			/* 16 bits */
+	.word 0xfffece14
+REG_ARM_SYSST:			/* 16 bits */
+	.word 0xfffece18
+/* DPLL control registers */
+REG_DPLL1_CTL:			/* 16 bits */
+	.word 0xfffecf00
+/* identification code register */
+REG_IDCODE:			/* 32 bits */
+	.word 0xfffed404
+
+/* SX1 specific */
+_GPIO_PIN_CONTROL_REG:
+	.word GPIO_PIN_CONTROL_REG
+_GPIO_DIR_CONTROL_REG:
+	.word GPIO_DIR_CONTROL_REG
+_GPIO_DATA_OUTPUT_REG:
+	.word GPIO_DATA_OUTPUT_REG
+
+VAL_COMP_MODE_CTRL_0:
+	.word 0x0000eaef
+VAL_FUNC_MUX_CTRL_4:
+	.word 0x00000000
+VAL_FUNC_MUX_CTRL_5:
+	.word 0x00000000
+VAL_FUNC_MUX_CTRL_6:
+	.word 0x00000001
+VAL_FUNC_MUX_CTRL_7:
+	.word 0x00001000
+VAL_FUNC_MUX_CTRL_8:
+	.word 0x00001240       /*[Knoller]  Value of Symbian Image Wing B2*/
+VAL_FUNC_MUX_CTRL_9:
+	.word 0x00201008
+VAL_FUNC_MUX_CTRL_A:
+	.word 0x00001000
+VAL_FUNC_MUX_CTRL_B:
+	.word 0x00000000
+VAL_FUNC_MUX_CTRL_C:
+	.word 0x09008001       /*[Knoller]  Value of Symbian Image Wing B2*/
+VAL_FUNC_MUX_CTRL_D:
+	.word 0x00000000
+VAL_PULL_DWN_CTRL_0:
+	.word 0xfffeffff
+VAL_PULL_DWN_CTRL_1:
+	.word 0xd1ffffec
+VAL_PULL_DWN_CTRL_2:
+	.word 0xffa80c5b
+VAL_PULL_DWN_CTRL_3:
+	.word 0xffffc0fe
+VAL_VOLTAGE_CTRL_0:
+	.word 0x00000007
+VAL_TEST_DBG_CTRL_0:
+	/* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
+	 * says to write a 7.  Don't know what the right thing is to do, so
+	 * I'm leaving it at 7 since that's what was already here.
+	 */
+	.word 0x00000007
+VAL_MOD_CONF_CTRL_0:
+	.word 0x0da20000       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_ARM_CKCTL:
+	.word 0x010D
+
+VAL_DPLL1_CTL:
+	.word 0x3A33   /*[Hertle] Value of Symbian Image*/
+
+VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
+	.word 0x00001149
+
+VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
+	.word 0x00004158
+
+VAL_TC_EMIFS_CS0_CONFIG:
+	.word 0x00213090       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFS_CS1_CONFIG:
+	.word 0x00215070       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFS_CS2_CONFIG:
+	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFS_CS3_CONFIG:
+	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFF_SDRAM_CONFIG:
+	.word 0x0105f0b4       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+
+VAL_TC_EMIFF_MRS:
+	.word 0x00000027       /*[Knoller]  Value of Symbian Image Wing B2*/
diff --git a/u-boot/board/sx1/sx1.c b/u-boot/board/sx1/sx1.c
new file mode 100644
index 0000000..aaef76e
--- /dev/null
+++ b/u-boot/board/sx1/sx1.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void flash__init (void);
+static void ether__init (void);
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+			  "subs %0, %1, #1\n"
+			  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	/* arch number of SX1 Board */
+	gd->bd->bi_arch_number = MACH_TYPE_SX1;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x10000100;
+
+/* kk - this speeds up your boot a quite a bit.	 However to make it
+ *  work, you need make sure your kernel startup flush bug is fixed.
+ *  ... rkw ...
+ */
+	icache_enable ();
+
+	flash__init ();
+	ether__init ();
+	return 0;
+}
+
+
+int misc_init_r (void)
+{
+	/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
+	/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
+
+	/* setup gpio direction to match board (no floats!) */
+	/**gdir = 0xCFF9; */
+	/**mdir = 0x103F; */
+
+	return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+static void flash__init (void)
+{
+#define CS0_CHIP_SELECT_REG 0xfffecc10
+#define CS3_CHIP_SELECT_REG 0xfffecc1c
+#define EMIFS_GlB_Config_REG 0xfffecc0c
+
+	unsigned int regval;
+
+	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
+	regval = regval | 0x0001;	/* Turn off write protection for flash devices. */
+	if (regval & 0x0002) {
+		regval = regval & 0xfffd;	/* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
+		/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
+		/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
+		/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
+	}
+	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
+}
+
+
+/******************************
+ Routine:
+ Description:
+******************************/
+static void ether__init (void)
+{
+#define ETH_CONTROL_REG 0x0800000b
+	/* take the Ethernet controller out of reset and wait
+	 * for the EEPROM load to complete.
+	 */
+	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+	udelay (3);
+}
+
+
+int dram_init (void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}