diff options
| -rw-r--r-- | CHANGELOG | 785 | ||||
| -rw-r--r-- | cpu/mpc8xx/cpu.c | 2 | ||||
| -rw-r--r-- | drivers/net/ne2000.c | 7 | ||||
| -rw-r--r-- | drivers/net/ne2000.h | 82 | ||||
| -rw-r--r-- | post/board/lwmon5/sysmon.c | 12 |
5 files changed, 832 insertions, 56 deletions
@@ -1,3 +1,788 @@ +commit 43ddd9c820fec44816188f53346b464e20b3142d +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Mar 22 14:23:49 2008 -0400 + + Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T + + These defines embedded the u-boot env variables and/or the bd_t structure + in the fdt blob. The conclusion of discussion on the u-boot email list + was that embedding these in the fdt blob is not useful: there are better + ways of passing the data (in fact, the fdt blob itself replaces the + bd_t struct). + + The only board that enables these is the stxxtc and they don't appear + to be used by linux. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 22ed2285743359fd1fe73e411dff914b2256e68f +Author: Stefan Roese <sr@denx.de> +Date: Mon Mar 17 10:49:25 2008 +0100 + + rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d +Author: Kyungmin Park <kmpark@infradead.org> +Date: Mon Mar 17 08:54:06 2008 +0900 + + Add Flex-OneNAND booting support + + Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array + using a NOR Flash interface. This on-chip integration enables system designers + to reduce external system logic and use high-density NAND Flash + in applications that would otherwise have to use more NOR components. + + Flex-OneNAND enables users to configure to partition it into SLC and MLC areas + in more flexible way. While MLC area of Flex-OneNAND can be used to store data + that require low reliability and high density, SLC area of Flex-OneNAND + to store data that need high reliability and high performance. Flex-OneNAND + can let users take advantage of storing these two different types of data + into one chip, which is making Flex-OneNAND more cost- and space-effective. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit c512389cc4a10253249271ff6c887c6dab1f0db2 +Author: André Schwarz <andre.schwarz@matrix-vision.de> +Date: Thu Mar 13 13:50:52 2008 +0100 + + MPC5200: support setup without FEC + + Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is + defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. + + Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit aa3511e422946041ef626f80a05ae5e8bfc700e6 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:46 2008 -0600 + + FSL: Move board/mpc8266ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7f1d846e5c5754449c286587d099d85246062772 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:47 2008 -0600 + + FSL: Move board/mpc7448hpc2 under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:45 2008 -0600 + + FSL: Move board/mpc8260ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Wed Mar 5 17:08:33 2008 +0900 + + net: Add support AX88796L ethernet device + + AX88796L is device of NE2000 compatible. + This patch support AX88796L ethernet device. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit e0a6140dd381e1eed1ada2291166ef2616d8822b +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 25 22:50:41 2008 +0100 + + ne2000 driver: change #ifdef to Makefile conditional compilation + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e710185aae90c64d39c2d453e40e58ceefe4f250 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Wed Mar 5 17:08:20 2008 +0900 + + net: Divided code of NE2000 ethernet driver + + There are more devices of the NE2000 base. + A present code is difficult for us to support more devices. + To support more NE2000 clone devices, separated the function. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 395bce4f59a507a60a475f7ee46bed47de9482df +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Feb 24 23:58:13 2008 -0500 + + net/Blackfin: move on-chip MAC driver into drivers/net/ + + The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board + directory, but it is not board specific, so relocate it to the drivers dir + so that other Blackfin ports can utilize it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Feb 24 23:52:35 2008 -0500 + + smc91111: use SSYNC() rather than asm(ssync) for Blackfin + + Since the "ssync" instruction may have hardware anomalies associated with + it, have the smc91111 driver use the SSYNC macro rather than invoking it + directly. We workaround all the anomalies via this macro. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 +Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> +Date: Sun Feb 17 22:57:47 2008 +0000 + + 8xx: Update OF support on 8xx + + This patch does some shifting around of OF support on 8xx. + + Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> + +commit 9c666a7db0b2285a270c68810889ce7d5dba304b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 15 15:16:18 2008 -0600 + + ppc: Allow boards to specify how much memory they can map + + For historical reasons we limited the stack to 256M because some boards + could only map that much via BATS. However newer boards are capable of + mapping more memory (for example 85xx is capble of doing up to 2G). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb +Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> +Date: Fri Feb 15 01:05:58 2008 +0000 + + 8xx : Add OF support to Adder875 board port - resubmit + + Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> + +commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Feb 14 20:44:42 2008 -0600 + + Add setexpr command + + Add a simple expr style command that will set an env variable as the result + of the command. This allows us to do simple math in shell. The following + operations are supported: &, |, ^, +, -, *, /. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3f105faa64b9826e088711fdfcaa70cb1230397a +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 17:27:48 2008 -0600 + + FSL: Move board/mpc7448hpc2 under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 449c703374a8868453425e15da7e2f76221b72e4 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 17:21:43 2008 -0600 + + FSL: Move board/mpc8266ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5863577989ad689427bb750107e9a75f1c1645d2 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 16:41:41 2008 -0600 + + FSL: Move board/mpc8260ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8a773983957ee6c4aa344469b742f29c7d26afbd +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:08 2008 +0900 + + [MIPS] Move gth2_config from ARM section to MIPS + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Fix dcache_status() + + You can't judge UNCACHED by Config.K0 LSB. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Introduce _machine_restart + + Handles machine specific functions by using weak functions. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit decaba6f5cf386d569ac3997bebb871b966c6b18 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Cleanup CP0 Status initialization + + Add setup_c0_status from Linux. For the moment we disable interrupts, set + CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for + reset-time configuration and will work well across most processors. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Initialize CP0 Cause before setting up CP0 Status register + + Without this change, we'll be suffering from deffered WATCH exception + once Status.EXL is cleared. Make sure Cause.WP is cleared. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 26138623230ca2bad3c78e05a65527ea70c8b688 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() + + Move things to appropriate place. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Implement flush_cache() + + We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you + don't need to do Hit_Invalidate_I, but flush_cache() needs it since this + function is used not only in U-Boot specfic programs but also at loading + target binaries. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Fix I-/D-cache initialization loops + + Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I + again per a loop for I-cache initialization. But according to 'See MIPS + Run', we're encouraged to use three separate loops rather than combining + them *for both I- and D-cache*. This patch tries to fix this. + + In accordance with fixing above, mips_init_[id]cache are separated from + mips_cache_reset(), and rewrite cache loops are completely rewritten with + useful macros. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 1898840797c7f50799377bd5b285a8a93a82c419 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Replace memory clearance code with f_fill64 + + This routine fills memory with zero by 64 bytes, and is 64-bit capable. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros + + This patch replaces the current function definitions with NESTED, LEAF + and END macro. They specify some more additional information about the + function; an alignment of symbol, type of symbol, stack frame usage, etc. + These information explicitly tells the assembler and the debugger about + the types of code we want to generate. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 282223a607c611425fa33f5428f8eae6636972bb +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 11:43:17 2008 +0900 + + [MIPS] asm headers' updates + + Make some asm headers adjusted to the latest Linux kernel. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 11:39:29 2008 +0900 + + [MIPS] Request for the 'mips_cache_lock()' removal + + The initial intension of having mips_cache_lock() was to use the cache + as memory for temporary stack use so that a C environment can be set up + as early as possible. + + But now mips_cache_lock() follow lowlevel_init(). We've already have the + real memory initilaized at this point, therefore we could/should use it. + No reason to lock at all. + + Other problems: + + Cache locking is not consistent across MIPS implementaions. Some imple- + mentations don't support locking at all. The style of locking varies - + some support per line locking, others per way, etc. Some parts use bits + in status registers instead of cache ops. Current mips_cache_lock() is + not necessarily general-purpose. + + And this is worthy of special mention; once U-Boot/MIPS locks the lines, + they are never get unlocked, so the code relies on whatever gets loaded + after U-Boot to re-initialize the cache and clear the locks. We're sup- + posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, + but leave the situation as it is for a long time. + + For these reasons, I proposed the removal of mips_cache_lock() from the + global start-up code. + + This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that + *things have changed*. If he wants the same behavior as before, he needs + to have CFG_INIT_RAM_LOCK_MIPS in his config file. + + If we don't have any regression report through several releases, then + we'll remove codes entirely. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + Acked-by: Andrew Dyer <amdyer@gmail.com> + +commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Mon Mar 24 11:30:54 2008 +0100 + + lwmon5 SYSMON POST: fix backlight control + + If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be + run on the board, then the SYSMON POST controls the display backlight + (doesn't switch backlight ON if POST FAILED, and does switch the + backlight ON if PASSED). + + If not, then the video driver controls the display backlight (just + switch ON the backlight upon initialization). + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Mon Mar 24 11:29:14 2008 +0100 + + lwmon5 SYSMON POST: fix handling of negative temperatures + + Fix errors in the LWMON5 Sysmon POST for negative temperatures. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Mar 7 16:04:25 2008 +0900 + + pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option + + In current source code, when the device number of PCI is 0, process PCI + bridge without fail. However, when the device number is 0, it is not PCI + always bridge. There are times when device of PCI allocates. + + When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when + use this patch. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Fri Mar 21 09:18:40 2008 +0100 + + LWMON5: fix dsPIC POST + + Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- + +commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Mar 20 22:01:38 2008 +0100 + + lwmon5 POST: remove unreachable code + + plus some coding style cleanup + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Thu Mar 20 17:56:04 2008 +0300 + + LWMON5: POST RTC fix + + Modify the RTC API to provide one a status for the time reported by + the rtc_get() function: + 0 - a reliable time is guaranteed, + < 0 - a reliable time isn't guaranteed (power fault, clock issues, + and so on). + + The RTC chip drivers are responsible for providing this info if the + corresponding chip supports such functionality. If not - always + report that the time is reliable. + + The POST RTC test was modified to detect the RTC faults utilizing + this new rtc_get() feature. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 +Author: Martin Krause <martin.krause@tqs.de> +Date: Wed Mar 19 14:25:14 2008 +0100 + + TQM5200B: update MTD partition layout + + - insert partition for dtb blob to TQM5200B MTD layout + - set env variables dependent on the configured board + (TQM5200 or TQM5200B) + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit f0105727d132f56a21fa3ed8b162309cca6cac44 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 07:09:26 2008 +0100 + + CFI: Small cleanup for FLASH_SHOW_PROGRESS + + With this patch we don't need that many #ifdef's in the code. It moves + the subtraction into the macro and defines a NOP-macro when + CONFIG_FLASH_SHOW_PROGRESS is not defined. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 9a042e9ca512beaaa2cb450274313fc477141241 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Mar 8 13:48:01 2008 -0500 + + Flash programming progress countdown. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Mon Feb 18 18:09:04 2008 +1100 + + libfdt: Remove no longer used code from fdt_node_offset_by_compatible() + + Since fdt_node_offset_by_compatible() was converted to the new + fdt_next_node() iterator, a chunk of initialization code became + redundant, but was not removed by oversight. This patch cleans it up. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit d0ccb9b140b472039732de102fc14597eedb14df +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Mon Feb 18 18:06:31 2008 +1100 + + libfdt: Trivial cleanup for CHECK_HEADER) + + Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. + However, there are a handful of functions (fdt_move, rw_check_header, + fdt_open_into) from other files which could also use it (currently + they open-code something more-or-less identical). Therefore, this + patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those + places. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit fe30a354cdbb808b5f15366a935b151a4ccee74f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 20 14:32:36 2008 -0600 + + Fix fdt boardsetup command parsing + + The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 804887e6001e2f00bea11431bf34d6d472512cda +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 15 03:34:36 2008 -0600 + + Add sub-commands to fdt + + fdt header - Display header info + fdt bootcpu <id> - Set boot cpuid + fdt memory <addr> <size> - Add/Update memory node + fdt rsvmem print - Show current mem reserves + fdt rsvmem add <addr> <size> - Add a mem reserve + fdt rsvmem delete <index> - Delete a mem reserves + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Thu Feb 14 16:50:34 2008 +1100 + + libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() + + fdt_add_subnode_namelen() has a bug if asked to add a subnode to a + node which has NOP tags interspersed with its properties. In this + case fdt_add_subnode_namelen() will put the new subnode before the + first NOP tag, even if there are properties after it, which will + result in an invalid blob. + + This patch fixes the bug, and adds a testcase for it. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Tue Feb 12 11:58:31 2008 +1100 + + libfdt: Add and use a node iteration helper function. + + This patch adds an fdt_next_node() function which can be used to + iterate through nodes of the tree while keeping track of depth. This + function is used to simplify the iteration code in a lot of other + functions, and is also exported for use by library users. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Fri Jan 11 14:55:05 2008 +1100 + + libfdt: Add fdt_set_name() function + + This patch adds an fdt_set_name() function to libfdt, mirroring + fdt_get_name(). This is a r/w function which alters the name of a + given device tree node. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 23e20aa6488e6c0622496549861bfdc74108debe +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Tue Mar 18 13:33:30 2008 +0100 + + lwmon5: Fix register test logic to match the specific GDC h/w. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 46bc0a938779aa1d664b847d36b08aa00f22e539 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Tue Mar 18 13:27:57 2008 +0100 + + Fix backlight in the lwmon5 POST. + + Backlight was switched on even when temperature was too low. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Wed Feb 6 18:48:36 2008 +0100 + + The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). + + To enable this, alternative, configuration the U-Boot board configuration + file for lwmon5 includes the definitions of alternative addresses for header + (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). + + The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, + and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the + lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 17:11:53 2008 +0100 + + Add support for the lwmon5 board reset via GPIO58. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 17:09:55 2008 +0100 + + Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:11:03 2008 +0100 + + The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:10:42 2008 +0100 + + The patch adds new POST tests for the Lwmon5 board. These are: + + * External Watchdog test; + * dsPIC tests; + * FPGA test; + * GDC test; + * Sysmon tests. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit c2ed33efbfff5767bca236828e021c55fd547b6c +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:10:01 2008 +0100 + + Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + +commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 18 17:35:51 2008 +0100 + + HMI1001: fix compile problem. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 1f2a9970109cebf7446e0503b10b71f8673045ee +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:32:30 2008 -0500 + + Blackfin: BF537-stamp: drop board-specific flash driver for CFI + + The parallel flash on the BF537-STAMP is CFI compliant, so there is no need + for the board specific driver at all. Just use the common CFI driver. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:36:14 2008 -0500 + + Blackfin: add proper ELF markings to some assembly functions + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:35:17 2008 -0500 + + Blackfin: new cplbinfo command for viewing cplb tables + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit aadb72503cd1602349a5fe53356d5f55ecc1b900 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:37:51 2008 -0500 + + Blackfin: update MAINTAINERS list + + Add maintainer information for the Blackfin boards. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:26:48 2008 -0500 + + Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU + + Stop tying things to the processor that should be tied to other defines and + change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build + system to select the -mcpu option. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 86a20fb920bd198105acf7b1191117f566d637ed +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Feb 16 07:40:36 2008 -0500 + + Blackfin: move bootldr command to common code + + This moves the Blackfin-common bootldr command out of the BF537-STAMP + specific board directory and into the common directory so that all Blackfin + boards may utilize it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit decbe029b2a9d3333d02c433389b1c821eea96d7 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Mar 14 11:05:20 2008 +0100 + + mgcoge: update configuration + + Fix configuration for mgcoge board + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit c136724cda0219c49f1d4b346f00da29b14fdf14 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Mar 16 01:22:59 2008 +0100 + + drivers/rtc/Makefile: keep list sorted + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f +Author: Tor Krill <tor@excito.com> +Date: Sat Mar 15 15:40:26 2008 +0100 + + Add support for Intersil isl1208 RTC + + Signed-off-by: Tor Krill <tor@excito.com> + +commit 0210cff3d079d97b2156b13685ee8de368e68a1a +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Mar 15 17:36:41 2008 +0100 + + cramfs: Fix ifdef + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Mar 16 01:12:58 2008 +0100 + + Conding style cleanup + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 41712b4e8c95dff23354bcd620e1f9477160c190 Author: Stefan Roese <sr@denx.de> Date: Wed Mar 5 12:31:53 2008 +0100 diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c index a86598e..ec6a3fd 100644 --- a/cpu/mpc8xx/cpu.c +++ b/cpu/mpc8xx/cpu.c @@ -634,6 +634,4 @@ void reset_8xx_watchdog (volatile immap_t * immr) immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */ # endif /* CONFIG_LWMON */ } - #endif /* CONFIG_WATCHDOG */ - diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c index abf910c..99baeea 100644 --- a/drivers/net/ne2000.c +++ b/drivers/net/ne2000.c @@ -5,7 +5,6 @@ Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world are GPL, so this is, of course, GPL. - ========================================================================== dev/if_dp83902a.c @@ -70,9 +69,7 @@ Add SNMP ####DESCRIPTIONEND#### - ========================================================================== - */ #include <common.h> @@ -210,7 +207,8 @@ dp83902a_start(u8 * enaddr) dp->running = true; for (i = 0; i < ETHER_ADDR_LEN; i++) { /* FIXME */ - //*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) + 0x1400)) = enaddr[i]; + /*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) + + * 0x1400)) = enaddr[i];*/ DP_OUT(base, DP_P1_PAR0+i, enaddr[i]); } /* Enable and start device */ @@ -218,7 +216,6 @@ dp83902a_start(u8 * enaddr) DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */ DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */ dp->running = true; - } /* diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h index 06e9a28..d324a00 100644 --- a/drivers/net/ne2000.h +++ b/drivers/net/ne2000.h @@ -5,7 +5,6 @@ Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world are GPL, so this is, of course, GPL. - ========================================================================== dev/dp83902a.h @@ -67,7 +66,6 @@ are GPL, so this is, of course, GPL. ####DESCRIPTIONEND#### ========================================================================== - */ /* @@ -129,55 +127,53 @@ int get_prom(u8* mac_addr) u_char value, offset; } program_seq[] = { {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ - {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ - {0x00, EN0_RCNTLO}, /* Clear the count regs. */ + {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ + {0x00, EN0_RCNTLO}, /* Clear the count regs. */ {0x00, EN0_RCNTHI}, - {0x00, EN0_IMR}, /* Mask completion irq. */ + {0x00, EN0_IMR}, /* Mask completion irq. */ {0xFF, EN0_ISR}, - {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ - {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ + {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ + {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ {32, EN0_RCNTLO}, {0x00, EN0_RCNTHI}, - {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ + {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ {0x00, EN0_RSARHI}, {E8390_RREAD+E8390_START, E8390_CMD}, }; - PRINTK("trying to get MAC via prom reading\n"); - - pcnet_reset_8390(); - - mdelay(10); - - for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) - n2k_outb(program_seq[i].value, program_seq[i].offset); - - PRINTK("PROM:"); - for (i = 0; i < 32; i++) { - prom[i] = n2k_inb(PCNET_DATAPORT); - PRINTK(" %02x", prom[i]); - } - PRINTK("\n"); - for (i = 0; i < NR_INFO; i++) { - if ((prom[0] == hw_info[i].a0) && - (prom[2] == hw_info[i].a1) && - (prom[4] == hw_info[i].a2)) { - PRINTK("matched board %d\n", i); - break; - } - } - if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { - PRINTK("on exit i is %d/%ld\n", i, NR_INFO); - PRINTK("MAC address is "); - for (j = 0; j < 6; j++){ - mac_addr[j] = prom[j<<1]; - PRINTK("%02x:",mac_addr[i]); - } - PRINTK("\n"); - return (i < NR_INFO) ? i : 0; - } - return NULL; -} + PRINTK ("trying to get MAC via prom reading\n"); + + pcnet_reset_8390 (); + + mdelay (10); + for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++) + n2k_outb (program_seq[i].value, program_seq[i].offset); + PRINTK ("PROM:"); + for (i = 0; i < 32; i++) { + prom[i] = n2k_inb (PCNET_DATAPORT); + PRINTK (" %02x", prom[i]); + } + PRINTK ("\n"); + for (i = 0; i < NR_INFO; i++) { + if ((prom[0] == hw_info[i].a0) && + (prom[2] == hw_info[i].a1) && + (prom[4] == hw_info[i].a2)) { + PRINTK ("matched board %d\n", i); + break; + } + } + if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { + PRINTK ("on exit i is %d/%ld\n", i, NR_INFO); + PRINTK ("MAC address is "); + for (j = 0; j < 6; j++) { + mac_addr[j] = prom[j << 1]; + PRINTK ("%02x:", mac_addr[i]); + } + PRINTK ("\n"); + return (i < NR_INFO) ? i : 0; + } + return NULL; +} #endif /* __DRIVERS_NE2000_H__ */ diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c index b1b81c6..0cf1cf2 100644 --- a/post/board/lwmon5/sysmon.c +++ b/post/board/lwmon5/sysmon.c @@ -34,9 +34,9 @@ * The test passes when all the following voltages and temperatures * are within allowed ranges: * - * Temperature -40 .. +85 C - * +5V +4.75 .. +5.25 V - * +5V standby +4.75 .. +5.25 V + * Temperature -40 .. +85 C + * +5V +4.75 .. +5.25 V + * +5V standby +4.75 .. +5.25 V * * LCD backlight is not enabled if temperature values are not within * allowed ranges (-30 .. + 80). The brightness of backlite can be @@ -116,15 +116,15 @@ static sysmon_table_t sysmon_table[] = { {"Temperature", " C", &sysmon_dspic_sgn, NULL, sysmon_backlight_disable, 1, 1, -32768, 32767, 0xFFFF, 0x8000-40, 0x8000+85, 0, - 0x8000-30, 0x8000+80, 0, 0x12BC}, + 0x8000-30, 0x8000+80, 0, 0x12BC}, {"+ 5 V", "V", &sysmon_dspic, NULL, NULL, 100, 1000, 0, 0xFFFF, 0xFFFF, 4750, 5250, 0, - 4750, 5250, 0, 0x12CA}, + 4750, 5250, 0, 0x12CA}, {"+ 5 V standby", "V", &sysmon_dspic, NULL, NULL, 100, 1000, 0, 0xFFFF, 0xFFFF, 4750, 5250, 0, - 4750, 5250, 0, 0x12C6}, + 4750, 5250, 0, 0x12C6}, }; static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]); |