summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--cpu/sh4/cpu.c8
-rw-r--r--drivers/net/sh_eth.c355
-rw-r--r--drivers/net/sh_eth.h10
-rw-r--r--include/netdev.h1
4 files changed, 240 insertions, 134 deletions
diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c
index d94e139..52b6cfd 100644
--- a/cpu/sh4/cpu.c
+++ b/cpu/sh4/cpu.c
@@ -82,3 +82,11 @@ int dcache_status (void)
{
return 0;
}
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SH_ETHER
+ sh_eth_initialize(bis);
+#endif
+ return 0;
+}
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 9e3cf98..ebe8588 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <malloc.h>
#include <net.h>
+#include <netdev.h>
#include <asm/errno.h>
#include <asm/io.h>
@@ -36,12 +37,7 @@
# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
#endif
-extern int eth_init(bd_t *bd);
-extern void eth_halt(void);
-extern int eth_rx(void);
-extern int eth_send(volatile void *packet, int length);
-
-static struct dev_info_s *dev;
+#define SH_ETH_PHY_DELAY 50000
/*
* Bits are written to the PHY serially using the
@@ -89,7 +85,7 @@ static void sh_eth_mii_ind_bus_release(int port)
udelay(1);
}
-static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len)
+static void sh_eth_mii_read_phy_bits(int port, u32 *val, int len)
{
int i;
u32 pir;
@@ -106,8 +102,6 @@ static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len)
outl(0, PIR(port));
udelay(1);
}
-
- return 0;
}
#define PHY_INIT 0xFFFFFFFF
@@ -183,26 +177,23 @@ static void sh_eth_mii_write_phy_reg(int port, u8 phy_addr, int reg, u16 val)
sh_eth_mii_ind_bus_release(port);
}
-void eth_halt(void)
-{
-}
-
-int eth_send(volatile void *packet, int len)
+int sh_eth_send(struct eth_device *dev, volatile void *packet, int len)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- int timeout;
- int rc = 0;
+ struct sh_eth_dev *eth = dev->priv;
+ int port = eth->port, ret = 0, timeout;
+ struct sh_eth_info *port_info = &eth->port_info[port];
if (!packet || len > 0xffff) {
- printf("eth_send: Invalid argument\n");
- return -EINVAL;
+ printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
+ ret = -EINVAL;
+ goto err;
}
/* packet must be a 4 byte boundary */
if ((int)packet & (4 - 1)) {
- printf("eth_send: packet not 4 byte alligned\n");
- return -EFAULT;
+ printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n", __func__);
+ ret = -EFAULT;
+ goto err;
}
/* Update tx descriptor */
@@ -224,24 +215,25 @@ int eth_send(volatile void *packet, int len)
udelay(100);
if (timeout < 0) {
- printf("eth_send: transmit timeout\n");
- rc = -1;
+ printf(SHETHER_NAME ": transmit timeout\n");
+ ret = -ETIMEDOUT;
goto err;
}
-err:
port_info->tx_desc_cur++;
if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
port_info->tx_desc_cur = port_info->tx_desc_base;
- return rc;
+ return ret;
+err:
+ return ret;
}
-int eth_rx(void)
+int sh_eth_recv(struct eth_device *dev)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- int len = 0;
+ struct sh_eth_dev *eth = dev->priv;
+ int port = eth->port, len = 0;
+ struct sh_eth_info *port_info = &eth->port_info[port];
volatile u8 *packet;
/* Check if the rx descriptor is ready */
@@ -275,10 +267,10 @@ int eth_rx(void)
}
#define EDMR_INIT_CNT 1000
-static int sh_eth_reset(struct dev_info_s *dev)
+static int sh_eth_reset(struct sh_eth_dev *eth)
{
- int port = dev->port;
- int i;
+ int port = eth->port;
+ int ret = 0, i;
/* Start e-dmac transmitter and receiver */
outl(EDSR_ENALL, EDSR(port));
@@ -292,33 +284,36 @@ static int sh_eth_reset(struct dev_info_s *dev)
}
if (i == EDMR_INIT_CNT) {
- printf("Error: Software reset timeout\n");
- return -1;
+ printf(SHETHER_NAME ": Software reset timeout\n");
+ ret = -EIO;
}
- return 0;
+
+ return ret;
}
-static int sh_eth_tx_desc_init(struct dev_info_s *dev)
+static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
+ int port = eth->port, i, ret = 0;
u32 tmp_addr;
+ struct sh_eth_info *port_info = &eth->port_info[port];
struct tx_desc_s *cur_tx_desc;
- int i;
- /* Allocate tx descriptors. They must be TX_DESC_SIZE bytes
- aligned */
- if (!(port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
+ /*
+ * Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned
+ */
+ port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
sizeof(struct tx_desc_s) +
- TX_DESC_SIZE - 1))) {
- printf("Error: malloc failed\n");
- return -ENOMEM;
+ TX_DESC_SIZE - 1);
+ if (!port_info->tx_desc_malloc) {
+ printf(SHETHER_NAME ": malloc failed\n");
+ ret = -ENOMEM;
+ goto err;
}
+
tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
~(TX_DESC_SIZE - 1));
/* Make sure we use a P2 address (non-cacheable) */
port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
-
port_info->tx_desc_cur = port_info->tx_desc_base;
/* Initialize all descriptors */
@@ -340,26 +335,30 @@ static int sh_eth_tx_desc_init(struct dev_info_s *dev)
outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port));
outl(0x01, TDFFR(port));/* Last discriptor bit */
- return 0;
+err:
+ return ret;
}
-static int sh_eth_rx_desc_init(struct dev_info_s *dev)
+static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- u32 tmp_addr;
+ int port = eth->port, i , ret = 0;
+ struct sh_eth_info *port_info = &eth->port_info[port];
struct rx_desc_s *cur_rx_desc;
+ u32 tmp_addr;
u8 *rx_buf;
- int i;
- /* Allocate rx descriptors. They must be RX_DESC_SIZE bytes
- aligned */
- if (!(port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
+ /*
+ * Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned
+ */
+ port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
sizeof(struct rx_desc_s) +
- RX_DESC_SIZE - 1))) {
- printf("Error: malloc failed\n");
- return -ENOMEM;
+ RX_DESC_SIZE - 1);
+ if (!port_info->rx_desc_malloc) {
+ printf(SHETHER_NAME ": malloc failed\n");
+ ret = -ENOMEM;
+ goto err;
}
+
tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
~(RX_DESC_SIZE - 1));
/* Make sure we use a P2 address (non-cacheable) */
@@ -367,15 +366,17 @@ static int sh_eth_rx_desc_init(struct dev_info_s *dev)
port_info->rx_desc_cur = port_info->rx_desc_base;
- /* Allocate rx data buffers. They must be 32 bytes aligned and in
- P2 area */
- if (!(port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE +
- 31))) {
- printf("Error: malloc failed\n");
- free(port_info->rx_desc_malloc);
- port_info->rx_desc_malloc = NULL;
- return -ENOMEM;
+ /*
+ * Allocate rx data buffers. They must be 32 bytes aligned and in
+ * P2 area
+ */
+ port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31);
+ if (!port_info->rx_buf_malloc) {
+ printf(SHETHER_NAME ": malloc failed\n");
+ ret = -ENOMEM;
+ goto err_buf_malloc;
}
+
tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) &
~(32 - 1));
port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
@@ -399,18 +400,31 @@ static int sh_eth_rx_desc_init(struct dev_info_s *dev)
outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port));
outl(RDFFR_RDLF, RDFFR(port));
- return 0;
+ return ret;
+
+err_buf_malloc:
+ free(port_info->rx_desc_malloc);
+ port_info->rx_desc_malloc = NULL;
+
+err:
+ return ret;
}
-static void sh_eth_desc_free(struct dev_info_s *dev)
+static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
+ int port = eth->port;
+ struct sh_eth_info *port_info = &eth->port_info[port];
if (port_info->tx_desc_malloc) {
free(port_info->tx_desc_malloc);
port_info->tx_desc_malloc = NULL;
}
+}
+
+static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
+{
+ int port = eth->port;
+ struct sh_eth_info *port_info = &eth->port_info[port];
if (port_info->rx_desc_malloc) {
free(port_info->rx_desc_malloc);
@@ -423,36 +437,48 @@ static void sh_eth_desc_free(struct dev_info_s *dev)
}
}
-static int sh_eth_desc_init(struct dev_info_s *dev)
+static int sh_eth_desc_init(struct sh_eth_dev *eth)
{
- int rc;
+ int ret = 0;
- if ((rc = sh_eth_tx_desc_init(dev)) || (rc = sh_eth_rx_desc_init(dev))) {
- sh_eth_desc_free(dev);
- return rc;
- }
+ ret = sh_eth_tx_desc_init(eth);
+ if (ret)
+ goto err_tx_init;
- return 0;
+ ret = sh_eth_rx_desc_init(eth);
+ if (ret)
+ goto err_rx_init;
+
+ return ret;
+err_rx_init:
+ sh_eth_tx_desc_free(eth);
+
+err_tx_init:
+ return ret;
}
-static int sh_eth_phy_config(struct dev_info_s *dev)
+static int sh_eth_phy_config(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- int timeout;
+ int port = eth->port, timeout, ret = 0;
+ struct sh_eth_info *port_info = &eth->port_info[port];
u32 val;
+
/* Reset phy */
- sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
+ sh_eth_mii_write_phy_reg
+ (port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
timeout = 10;
while (timeout--) {
- val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, PHY_CTRL);
+ val = sh_eth_mii_read_phy_reg(port,
+ port_info->phy_addr, PHY_CTRL);
if (!(val & PHY_C_RESET))
break;
- udelay(50000);
+ udelay(SH_ETH_PHY_DELAY);
}
+
if (timeout < 0) {
- printf("%s phy reset timeout\n", __func__);
- return -1;
+ printf(SHETHER_NAME ": phy reset timeout\n");
+ ret = -EIO;
+ goto err_tout;
}
/* Advertise 100/10 baseT full/half duplex */
@@ -467,23 +493,27 @@ static int sh_eth_phy_config(struct dev_info_s *dev)
val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
if (val & PHY_S_ANEGC)
break;
- udelay(50000);
+
+ udelay(SH_ETH_PHY_DELAY);
}
+
if (timeout < 0) {
- printf("sh_eth_phy_config() phy auto-negotiation failed\n");
- return -1;
+ printf(SHETHER_NAME ": phy auto-negotiation failed\n");
+ ret = -ETIMEDOUT;
+ goto err_tout;
}
- return 0;
+ return ret;
+
+err_tout:
+ return ret;
}
-static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
+static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- u32 val;
- u32 phy_status;
- int rc;
+ int port = eth->port, ret = 0;
+ u32 val, phy_status;
+ struct sh_eth_info *port_info = &eth->port_info[port];
/* Configure e-dmac registers */
outl((inl(EDMR(port)) & ~EMDR_DESC_R) | EDMR_EL, EDMR(port));
@@ -513,20 +543,20 @@ static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
outl(TPAUSER_TPAUSE, TPAUSER(port));
/* Configure phy */
- if ((rc = sh_eth_phy_config(dev)))
- return rc;
-
+ ret = sh_eth_phy_config(eth);
+ if (ret) {
+ printf(SHETHER_NAME ":i phy config timeout\n");
+ goto err_phy_cfg;
+ }
/* Read phy status to finish configuring the e-mac */
- phy_status = sh_eth_mii_read_phy_reg(dev->port,
- dev->port_info[dev->port].phy_addr,
- 1);
+ phy_status = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
/* Set the transfer speed */
if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
- printf("100Base/");
+ printf(SHETHER_NAME ": 100Base/");
outl(GECMR_100B, GECMR(port));
} else {
- printf("10Base/");
+ printf(SHETHER_NAME ": 10Base/");
outl(GECMR_10B, GECMR(port));
}
@@ -538,27 +568,34 @@ static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
printf("Half\n");
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
}
- return 0;
+
+ return ret;
+
+err_phy_cfg:
+ return ret;
}
-static int sh_eth_start(struct dev_info_s *dev)
+static void sh_eth_start(struct sh_eth_dev *eth)
{
/*
* Enable the e-dmac receiver only. The transmitter will be enabled when
* we have something to transmit
*/
- outl(EDRRR_R, EDRRR(dev->port));
+ outl(EDRRR_R, EDRRR(eth->port));
+}
- return 0;
+static void sh_eth_stop(struct sh_eth_dev *eth)
+{
+ outl(~EDRRR_R, EDRRR(eth->port));
}
static int sh_eth_get_mac(bd_t *bd)
{
char *s, *e;
- int i;
s = getenv("ethaddr");
if (s != NULL) {
+ int i;
for (i = 0; i < 6; ++i) {
bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
if (s)
@@ -570,34 +607,92 @@ static int sh_eth_get_mac(bd_t *bd)
return 0;
}
-int eth_init(bd_t *bd)
+int sh_eth_init(struct eth_device *dev, bd_t *bd)
{
- int rc;
- /* Allocate main device information structure */
- if (!(dev = malloc(sizeof(*dev)))) {
- printf("eth_init: malloc failed\n");
- return -ENOMEM;
- }
+ int ret = 0;
+ struct sh_eth_dev *eth = dev->priv;
- memset(dev, 0, sizeof(*dev));
+ ret = sh_eth_reset(eth);
+ if (ret)
+ goto err;
- dev->port = CONFIG_SH_ETHER_USE_PORT;
- dev->port_info[dev->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
+ ret = sh_eth_desc_init(eth);
+ if (ret)
+ goto err;
- sh_eth_get_mac(bd);
+ ret = sh_eth_config(eth, bd);
+ if (ret)
+ goto err_config;
+
+ sh_eth_start(eth);
+
+ return ret;
- if ((rc = sh_eth_reset(dev)) || (rc = sh_eth_desc_init(dev)))
+err_config:
+ sh_eth_tx_desc_free(eth);
+ sh_eth_rx_desc_free(eth);
+
+err:
+ return ret;
+}
+
+void sh_eth_halt(struct eth_device *dev)
+{
+ struct sh_eth_dev *eth = dev->priv;
+
+ sh_eth_reset(eth);
+ sh_eth_stop(eth);
+}
+
+int sh_eth_initialize(bd_t *bd)
+{
+ int ret = 0;
+ struct sh_eth_dev *eth = NULL;
+ struct eth_device *dev = NULL;
+
+ eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
+ if (!eth) {
+ printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
+ ret = -ENOMEM;
goto err;
+ }
- if ((rc = sh_eth_config(dev, bd)) || (rc = sh_eth_start(dev)))
- goto err_desc;
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+ if (!dev) {
+ printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
+ ret = -ENOMEM;
+ goto err;
+ }
+ memset(dev, 0, sizeof(struct eth_device));
+ memset(eth, 0, sizeof(struct sh_eth_dev));
- return 0;
+ eth->port = CONFIG_SH_ETHER_USE_PORT;
+ eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
+
+ dev->priv = (void *)eth;
+ dev->iobase = 0;
+ dev->init = sh_eth_init;
+ dev->halt = sh_eth_halt;
+ dev->send = sh_eth_send;
+ dev->recv = sh_eth_recv;
+ eth->port_info[eth->port].dev = dev;
+
+ sprintf(dev->name, SHETHER_NAME);
+
+ /* Register Device to EtherNet subsystem */
+ eth_register(dev);
+
+ sh_eth_get_mac(bd);
+
+ return ret;
-err_desc:
- sh_eth_desc_free(dev);
err:
- free(dev);
- printf("eth_init: Failed\n");
- return rc;
+ if (dev)
+ free(dev);
+
+ if (eth)
+ free(eth);
+
+ printf(SHETHER_NAME ": Failed\n");
+ return ret;
}
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 9cf0ea0..a13fff0 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -20,6 +20,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <netdev.h>
#include <asm/types.h>
#define SHETHER_NAME "sh_eth"
@@ -48,7 +49,7 @@
#define TX_DESC_PADDING 4
#define TX_DESC_SIZE (12 + TX_DESC_PADDING)
-/* Tx descriptor. We always use 4 bytes of padding */
+/* Tx descriptor. We always use 3 bytes of padding */
struct tx_desc_s {
volatile u32 td0;
u32 td1;
@@ -72,7 +73,7 @@ struct rx_desc_s {
u32 padding;
};
-struct port_info_s {
+struct sh_eth_info {
struct tx_desc_s *tx_desc_malloc;
struct tx_desc_s *tx_desc_base;
struct tx_desc_s *tx_desc_cur;
@@ -83,11 +84,12 @@ struct port_info_s {
u8 *rx_buf_base;
u8 mac_addr[6];
u8 phy_addr;
+ struct eth_device *dev;
};
-struct dev_info_s {
+struct sh_eth_dev {
int port;
- struct port_info_s port_info[MAX_PORT_NUM];
+ struct sh_eth_info port_info[MAX_PORT_NUM];
};
/* Register Address */
diff --git a/include/netdev.h b/include/netdev.h
index 751f0da..a7d662d 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -70,6 +70,7 @@ int skge_initialize(bd_t *bis);
int tsi108_eth_initialize(bd_t *bis);
int uec_initialize(int index);
int uli526x_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
generated by cgit v1.1 at 2024-10-31 01:05:30 +0000