diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 27 |
1 files changed, 8 insertions, 19 deletions
@@ -536,25 +536,6 @@ The following options need to be configured: must be defined, to setup the maximum idle timeout for the SMC. -- Interrupt driven serial port input: - CONFIG_SERIAL_SOFTWARE_FIFO - - PPC405GP only. - Use an interrupt handler for receiving data on the - serial port. It also enables using hardware handshake - (RTS/CTS) and UART's built-in FIFO. Set the number of - bytes the interrupt driven input buffer should have. - - Leave undefined to disable this feature, including - disable the buffer and hardware handshake. - -- Console UART Number: - CONFIG_UART1_CONSOLE - - AMCC PPC4xx only. - If defined internal UART1 (and not UART0) is used - as default U-Boot console. - - Boot Delay: CONFIG_BOOTDELAY - in seconds Delay before automatically booting the default image; set to -1 to disable autoboot. @@ -2368,6 +2349,14 @@ Configuration Settings: on high Ethernet traffic. Defaults to 4 if not defined. +- CONFIG_ENV_MAX_ENTRIES + + Maximum number of entries in the hash table that is used + internally to store the environment settings. The default + setting is supposed to be generous and should work in most + cases. This setting can be used to tune behaviour; see + lib/hashtable.c for details. + The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: |