diff options
Diffstat (limited to 'arch/ppc/cpu/mpc8220/uart.c')
| -rw-r--r-- | arch/ppc/cpu/mpc8220/uart.c | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc8220/uart.c b/arch/ppc/cpu/mpc8220/uart.c new file mode 100644 index 0000000..0c4b536 --- /dev/null +++ b/arch/ppc/cpu/mpc8220/uart.c @@ -0,0 +1,126 @@ +/* + * (C) Copyright 2004, Freescale, Inc + * TsiChung Liew, Tsi-Chung.Liew@freescale.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Minimal serial functions needed to use one of the PSC ports + * as serial console interface. + */ + +#include <common.h> +#include <mpc8220.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define PSC_BASE MMAP_PSC1 + +#if defined(CONFIG_PSC_CONSOLE) +int serial_init (void) +{ + volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; + u32 counter; + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + psc->cr = 0; + psc->ipcr_acr = 0; + psc->isr_imr = 0; + + /* write to CSR: RX/TX baud rate from timers */ + psc->sr_csr = 0xdd000000; + + psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1; + + /* Setting up BaudRate */ + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + psc->ctur = ((counter & 0xff00) << 16); + /* write to CTLR: divide counter lower byte */ + psc->ctlr = ((counter & 0x00ff) << 24); + + psc->cr = PSC_CR_RST_RX_CMD; + psc->cr = PSC_CR_RST_TX_CMD; + psc->cr = PSC_CR_RST_ERR_STS_CMD; + psc->cr = PSC_CR_RST_BRK_INT_CMD; + psc->cr = PSC_CR_RST_MR_PTR_CMD; + + psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE; + return (0); +} + +void serial_putc (const char c) +{ + volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; + + if (c == '\n') + serial_putc ('\r'); + + /* Wait for last character to go. */ + while (!(psc->sr_csr & PSC_SR_TXRDY)); + + psc->xmitbuf[0] = c; +} + +void serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int serial_getc (void) +{ + volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; + + /* Wait for a character to arrive. */ + while (!(psc->sr_csr & PSC_SR_RXRDY)); + return psc->xmitbuf[2]; +} + +int serial_tstc (void) +{ + volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; + + return (psc->sr_csr & PSC_SR_RXRDY); +} + +void serial_setbrg (void) +{ + volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; + u32 counter; + + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + psc->ctur = ((counter & 0xff00) << 16); + /* write to CTLR: divide counter lower byte */ + psc->ctlr = ((counter & 0x00ff) << 24); + + psc->cr = PSC_CR_RST_RX_CMD; + psc->cr = PSC_CR_RST_TX_CMD; + + psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE; +} +#endif /* CONFIG_PSC_CONSOLE */ |