diff options
Diffstat (limited to 'arch/ppc/cpu/mpc824x/drivers/epic/epic1.c')
-rw-r--r-- | arch/ppc/cpu/mpc824x/drivers/epic/epic1.c | 517 |
1 files changed, 517 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc824x/drivers/epic/epic1.c b/arch/ppc/cpu/mpc824x/drivers/epic/epic1.c new file mode 100644 index 0000000..ecbb42d --- /dev/null +++ b/arch/ppc/cpu/mpc824x/drivers/epic/epic1.c @@ -0,0 +1,517 @@ +/************************************************** + * + * copyright @ motorola, 1999 + * + *************************************************/ +#include <mpc824x.h> +#include <common.h> +#include "epic.h" + + +#define PRINT(format, args...) printf(format , ## args) + +typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */ +struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */ + { + { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"}, + { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"}, + { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"}, + { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"}, + { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"}, + + { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"}, + { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"}, + { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"}, + { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"}, + { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"}, + { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"}, + { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"}, + { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"}, + { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"}, + { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"}, + { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"}, + + { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"}, + { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"}, + { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"}, + { EPIC_MSG_INT_VEC_REG, "Internal Message Source"}, + }; + +VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */ + + +/**************************************************************************** +* epicInit - Initialize the EPIC registers +* +* This routine resets the Global Configuration Register, thus it: +* - Disables all interrupts +* - Sets epic registers to reset values +* - Sets the value of the Processor Current Task Priority to the +* highest priority (0xF). +* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass +* Through or 8259 compatible mode). +* +* If IRQType (input) is Direct IRQs: +* - IRQType is written to the SIE bit of the EPIC Interrupt +* Configuration register (ICR). +* - clkRatio is ignored. +* If IRQType is Serial IRQs: +* - both IRQType and clkRatio will be written to the ICR register +*/ + +void epicInit + ( + unsigned int IRQType, /* Direct or Serial */ + unsigned int clkRatio /* Clk Ratio for Serial IRQs */ + ) + { + ULONG tmp; + + tmp = sysEUMBBARRead(EPIC_GLOBAL_REG); + tmp |= 0xa0000000; /* Set the Global Conf. register */ + sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp); + /* + * Wait for EPIC to reset - CLH + */ + while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1); + sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000); + tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */ + + if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */ + sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff); + else /* Serial mode */ + { + tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */ + sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp); + } + + while (epicIntAck() != 0xff) /* Clear all pending interrupts */ + epicEOI(); +} + +/**************************************************************************** + * epicIntEnable - Enable an interrupt source + * + * This routine clears the mask bit of an external, an internal or + * a Timer register to enable the interrupt. + * + * RETURNS: None + */ +void epicIntEnable(int intVec) +{ + ULONG tmp; + ULONG srAddr; + + srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */ + tmp = sysEUMBBARRead(srAddr); + tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */ + tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */ + tmp |= intVec; /* Set Vector number */ + sysEUMBBARWrite(srAddr, tmp); + + return; + } + +/**************************************************************************** + * epicIntDisable - Disable an interrupt source + * + * This routine sets the mask bit of an external, an internal or + * a Timer register to disable the interrupt. + * + * RETURNS: OK or ERROR + * + */ + +void epicIntDisable + ( + int intVec /* Interrupt vector number */ + ) + { + + ULONG tmp, srAddr; + + srAddr = SrcVecTable[intVec].srcAddr; + tmp = sysEUMBBARRead(srAddr); + tmp |= 0x80000000; /* Set the mask bit */ + sysEUMBBARWrite(srAddr, tmp); + return; + } + +/**************************************************************************** + * epicIntSourceConfig - Set properties of an interrupt source + * + * This function sets interrupt properites (Polarity, Sense, Interrupt + * Prority, and Interrupt Vector) of an Interrupt Source. The properties + * can be set when the current source is not in-request or in-service, + * which is determined by the Activity bit. This routine return ERROR + * if the the Activity bit is 1 (in-request or in-service). + * + * This function assumes that the Source Vector/Priority register (input) + * is a valid address. + * + * RETURNS: OK or ERROR + */ + +int epicIntSourceConfig + ( + int Vect, /* interrupt source vector number */ + int Polarity, /* interrupt source polarity */ + int Sense, /* interrupt source Sense */ + int Prio /* interrupt source priority */ + ) + + { + ULONG tmp, newVal; + ULONG actBit, srAddr; + + srAddr = SrcVecTable[Vect].srcAddr; + tmp = sysEUMBBARRead(srAddr); + actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */ + if (actBit == 1) + return ERROR; + + tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */ + newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect; + sysEUMBBARWrite(srAddr, tmp | newVal ); + return (OK); + } + +/**************************************************************************** + * epicIntAck - acknowledge an interrupt + * + * This function reads the Interrupt acknowldge register and return + * the vector number of the highest pending interrupt. + * + * RETURNS: Interrupt Vector number. + */ + +unsigned int epicIntAck(void) +{ + return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG )); +} + +/**************************************************************************** + * epicEOI - signal an end of interrupt + * + * This function writes 0x0 to the EOI register to signal end of interrupt. + * It is usually called after an interrupt routine is served. + * + * RETURNS: None + */ + +void epicEOI(void) + { + sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0); + } + +/**************************************************************************** + * epicCurTaskPrioSet - sets the priority of the Processor Current Task + * + * This function should be called after epicInit() to lower the priority + * of the processor current task. + * + * RETURNS: OK or ERROR + */ + +int epicCurTaskPrioSet + ( + int prioNum /* New priority value */ + ) + { + + if ( (prioNum < 0) || (prioNum > 0xF)) + return ERROR; + sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum); + return OK; + } + + +/************************************************************************ + * function: epicIntTaskGet + * + * description: Get value of processor current interrupt task priority register + * + * note: + ***********************************************************************/ +unsigned char epicIntTaskGet() +{ + /* get the interrupt task priority register */ + ULONG reg; + unsigned char rec; + + reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG ); + rec = ( reg & 0x0F ); + return rec; +} + + +/************************************************************** + * function: epicISR + * + * description: EPIC service routine called by the core exception + * at 0x500 + * + * note: + **************************************************************/ +unsigned int epicISR(void) +{ + return 0; +} + + +/************************************************************ + * function: epicModeGet + * + * description: query EPIC mode, return 0 if pass through mode + * return 1 if mixed mode + * + * note: + *************************************************************/ +unsigned int epicModeGet(void) +{ + ULONG val; + + val = sysEUMBBARRead( EPIC_GLOBAL_REG ); + return (( val & 0x20000000 ) >> 29); +} + + +/********************************************* + * function: epicConfigGet + * + * description: Get the EPIC interrupt Configuration + * return 0 if not error, otherwise return 1 + * + * note: + ********************************************/ +void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable) +{ + ULONG val; + + val = sysEUMBBARRead( EPIC_INT_CONF_REG ); + *clkRatio = ( val & 0x70000000 ) >> 28; + *serEnable = ( val & 0x8000000 ) >> 27; +} + + +/******************************************************************* + * sysEUMBBARRead - Read a 32-bit EUMBBAR register + * + * This routine reads the content of a register in the Embedded + * Utilities Memory Block, and swaps to big endian before returning + * the value. + * + * RETURNS: The content of the specified EUMBBAR register. + */ + +ULONG sysEUMBBARRead + ( + ULONG regNum + ) + { + ULONG temp; + + temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum); + return ( LONGSWAP(temp)); + } + +/******************************************************************* + * sysEUMBBARWrite - Write a 32-bit EUMBBAR register + * + * This routine swaps the value to little endian then writes it to + * a register in the Embedded Utilities Memory Block address space. + * + * RETURNS: N/A + */ + +void sysEUMBBARWrite + ( + ULONG regNum, /* EUMBBAR register address */ + ULONG regVal /* Value to be written */ + ) + { + + *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal); + return ; + } + + +/******************************************************** + * function: epicVendorId + * + * description: return the EPIC Vendor Identification + * register: + * + * siliccon version, device id, and vendor id + * + * note: + ********************************************************/ +void epicVendorId + ( + unsigned int *step, + unsigned int *devId, + unsigned int *venId + ) + { + ULONG val; + val = sysEUMBBARRead( EPIC_VENDOR_ID_REG ); + *step = ( val & 0x00FF0000 ) >> 16; + *devId = ( val & 0x0000FF00 ) >> 8; + *venId = ( val & 0x000000FF ); + } + +/************************************************** + * function: epicFeatures + * + * description: return the number of IRQ supported, + * number of CPU, and the version of the + * OpenEPIC + * + * note: + *************************************************/ +void epicFeatures + ( + unsigned int *noIRQs, + unsigned int *noCPUs, + unsigned int *verId + ) + { + ULONG val; + + val = sysEUMBBARRead( EPIC_FEATURES_REG ); + *noIRQs = ( val & 0x07FF0000 ) >> 16; + *noCPUs = ( val & 0x00001F00 ) >> 8; + *verId = ( val & 0x000000FF ); +} + + +/********************************************************* + * function: epciTmFrequncySet + * + * description: Set the timer frequency reporting register + ********************************************************/ +void epicTmFrequencySet( unsigned int frq ) +{ + sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq); +} + +/******************************************************* + * function: epicTmFrequncyGet + * + * description: Get the current value of the Timer Frequency + * Reporting register + * + ******************************************************/ +unsigned int epicTmFrequencyGet(void) +{ + return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ; +} + + +/**************************************************** + * function: epicTmBaseSet + * + * description: Set the #n global timer base count register + * return 0 if no error, otherwise return 1. + * + * note: + ****************************************************/ +unsigned int epicTmBaseSet + ( + ULONG srcAddr, /* Address of the Timer Base register */ + unsigned int cnt, /* Base count */ + unsigned int inhibit /* 1 - count inhibit */ + ) +{ + + unsigned int val = 0x80000000; + /* First inhibit counting the timer */ + sysEUMBBARWrite(srcAddr, val) ; + + /* set the new value */ + val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31); + sysEUMBBARWrite(srcAddr, val) ; + return 0; +} + +/*********************************************************************** + * function: epicTmBaseGet + * + * description: Get the current value of the global timer base count register + * return 0 if no error, otherwise return 1. + * + * note: + ***********************************************************************/ +unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val ) +{ + *val = sysEUMBBARRead( srcAddr ); + *val = *val & 0x7fffffff; + return 0; +} + +/*********************************************************** + * function: epicTmCountGet + * + * description: Get the value of a given global timer + * current count register + * return 0 if no error, otherwise return 1 + * note: + **********************************************************/ +unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val ) +{ + *val = sysEUMBBARRead( srcAddr ); + *val = *val & 0x7fffffff; + return 0; +} + + +/*********************************************************** + * function: epicTmInhibit + * + * description: Stop counting of a given global timer + * return 0 if no error, otherwise return 1 + * + * note: + ***********************************************************/ +unsigned int epicTmInhibit( unsigned int srcAddr ) +{ + ULONG val; + + val = sysEUMBBARRead( srcAddr ); + val |= 0x80000000; + sysEUMBBARWrite( srcAddr, val ); + return 0; +} + +/****************************************************************** + * function: epicTmEnable + * + * description: Enable counting of a given global timer + * return 0 if no error, otherwise return 1 + * + * note: + *****************************************************************/ +unsigned int epicTmEnable( ULONG srcAddr ) +{ + ULONG val; + + val = sysEUMBBARRead( srcAddr ); + val &= 0x7fffffff; + sysEUMBBARWrite( srcAddr, val ); + return 0; +} + +void epicSourcePrint(int Vect) + { + ULONG srcVal; + + srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr); + PRINT("%s\n", SrcVecTable[Vect].srcName); + PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr); + PRINT("Vector = %ld\n", (srcVal & 0x000000FF) ); + PRINT("Mask = %ld\n", srcVal >> 31); + PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30); + PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23); + PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22); + PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16); + } |