diff options
Diffstat (limited to 'arch/ppc/cpu/mpc8xx/fec.c')
| -rw-r--r-- | arch/ppc/cpu/mpc8xx/fec.c | 1026 |
1 files changed, 1026 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc8xx/fec.c b/arch/ppc/cpu/mpc8xx/fec.c new file mode 100644 index 0000000..89c1ff9 --- /dev/null +++ b/arch/ppc/cpu/mpc8xx/fec.c @@ -0,0 +1,1026 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <commproc.h> +#include <net.h> +#include <command.h> + +DECLARE_GLOBAL_DATA_PTR; + +#undef ET_DEBUG + +#if defined(CONFIG_CMD_NET) && \ + (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)) + +/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */ +#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2) +#define CONFIG_ETHER_ON_FEC1 1 +#endif + +/* define WANT_MII when MII support is required */ +#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY) +#define WANT_MII +#else +#undef WANT_MII +#endif + +#if defined(WANT_MII) +#include <miiphy.h> + +#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) +#error "CONFIG_MII has to be defined!" +#endif + +#endif + +#if defined(CONFIG_RMII) && !defined(WANT_MII) +#error RMII support is unusable without a working PHY. +#endif + +#ifdef CONFIG_SYS_DISCOVER_PHY +static int mii_discover_phy(struct eth_device *dev); +#endif + +int fec8xx_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +int fec8xx_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value); + +static struct ether_fcc_info_s +{ + int ether_index; + int fecp_offset; + int phy_addr; + int actual_phy_addr; + int initialized; +} + ether_fcc_info[] = { +#if defined(CONFIG_ETHER_ON_FEC1) + { + 0, + offsetof(immap_t, im_cpm.cp_fec1), +#if defined(CONFIG_FEC1_PHY) + CONFIG_FEC1_PHY, +#else + -1, /* discover */ +#endif + -1, + 0, + + }, +#endif +#if defined(CONFIG_ETHER_ON_FEC2) + { + 1, + offsetof(immap_t, im_cpm.cp_fec2), +#if defined(CONFIG_FEC2_PHY) + CONFIG_FEC2_PHY, +#else + -1, +#endif + -1, + 0, + }, +#endif +}; + +/* Ethernet Transmit and Receive Buffers */ +#define DBUF_LENGTH 1520 + +#define TX_BUF_CNT 2 + +#define TOUT_LOOP 100 + +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 + +#ifdef __GNUC__ +static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8))); +#else +#error txbuf must be aligned. +#endif + +static uint rxIdx; /* index of the current RX buffer */ +static uint txIdx; /* index of the current TX buffer */ + +/* + * FEC Ethernet Tx and Rx buffer descriptors allocated at the + * immr->udata_bd address on Dual-Port RAM + * Provide for Double Buffering + */ + +typedef volatile struct CommonBufferDescriptor { + cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ + cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ +} RTXBD; + +static RTXBD *rtx = NULL; + +static int fec_send(struct eth_device* dev, volatile void *packet, int length); +static int fec_recv(struct eth_device* dev); +static int fec_init(struct eth_device* dev, bd_t * bd); +static void fec_halt(struct eth_device* dev); +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) +static void __mii_init(void); +#endif + +int fec_initialize(bd_t *bis) +{ + struct eth_device* dev; + struct ether_fcc_info_s *efis; + int i; + + for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) { + + dev = malloc(sizeof(*dev)); + if (dev == NULL) + hang(); + + memset(dev, 0, sizeof(*dev)); + + /* for FEC1 make sure that the name of the interface is the same + as the old one for compatibility reasons */ + if (i == 0) { + sprintf (dev->name, "FEC ETHERNET"); + } else { + sprintf (dev->name, "FEC%d ETHERNET", + ether_fcc_info[i].ether_index + 1); + } + + efis = ðer_fcc_info[i]; + + /* + * reset actual phy addr + */ + efis->actual_phy_addr = -1; + + dev->priv = efis; + dev->init = fec_init; + dev->halt = fec_halt; + dev->send = fec_send; + dev->recv = fec_recv; + + eth_register(dev); + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + miiphy_register(dev->name, + fec8xx_miiphy_read, fec8xx_miiphy_write); +#endif + } + return 1; +} + +static int fec_send(struct eth_device* dev, volatile void *packet, int length) +{ + int j, rc; + struct ether_fcc_info_s *efis = dev->priv; + volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); + + /* section 16.9.23.3 + * Wait for ready + */ + j = 0; + while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { + udelay(1); + j++; + } + if (j>=TOUT_LOOP) { + printf("TX not ready\n"); + } + + rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; + rtx->txbd[txIdx].cbd_datlen = length; + rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; + __asm__ ("eieio"); + + /* Activate transmit Buffer Descriptor polling */ + fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ + + j = 0; + while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { +#if defined(CONFIG_ICU862) + udelay(10); +#else + udelay(1); +#endif + j++; + } + if (j>=TOUT_LOOP) { + printf("TX timeout\n"); + } +#ifdef ET_DEBUG + printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", + __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc, + (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2); +#endif + /* return only status bits */; + rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); + + txIdx = (txIdx + 1) % TX_BUF_CNT; + + return rc; +} + +static int fec_recv (struct eth_device *dev) +{ + struct ether_fcc_info_s *efis = dev->priv; + volatile fec_t *fecp = + (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); + int length; + + for (;;) { + /* section 16.9.23.2 */ + if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } + + length = rtx->rxbd[rxIdx].cbd_datlen; + + if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { +#ifdef ET_DEBUG + printf ("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + rtx->rxbd[rxIdx].cbd_sc); +#endif + } else { + volatile uchar *rx = NetRxPackets[rxIdx]; + + length -= 4; + +#if defined(CONFIG_CMD_CDP) + if ((rx[0] & 1) != 0 + && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0 + && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0) + rx = NULL; +#endif + /* + * Pass the packet up to the protocol layers. + */ + if (rx != NULL) + NetReceive (rx, length); + } + + /* Give the buffer back to the FEC. */ + rtx->rxbd[rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if ((rxIdx + 1) >= PKTBUFSRX) { + rtx->rxbd[PKTBUFSRX - 1].cbd_sc = + (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); + rxIdx = 0; + } else { + rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + rxIdx++; + } + + __asm__ ("eieio"); + + /* Try to fill Buffer Descriptors */ + fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ + } + + return length; +} + +/************************************************************** + * + * FEC Ethernet Initialization Routine + * + *************************************************************/ + +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_ECNTRL_ETHER_EN 0x00000002 +#define FEC_ECNTRL_RESET 0x00000001 + +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_LOOP 0x00000001 + +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_GTS 0x00000001 + +#define FEC_RESET_DELAY 50 + +#if defined(CONFIG_RMII) + +static inline void fec_10Mbps(struct eth_device *dev) +{ + struct ether_fcc_info_s *efis = dev->priv; + int fecidx = efis->ether_index; + uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008; + + if ((unsigned int)fecidx >= 2) + hang(); + + ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask; +} + +static inline void fec_100Mbps(struct eth_device *dev) +{ + struct ether_fcc_info_s *efis = dev->priv; + int fecidx = efis->ether_index; + uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008; + + if ((unsigned int)fecidx >= 2) + hang(); + + ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask; +} + +#endif + +static inline void fec_full_duplex(struct eth_device *dev) +{ + struct ether_fcc_info_s *efis = dev->priv; + volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); + + fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT; + fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */ +} + +static inline void fec_half_duplex(struct eth_device *dev) +{ + struct ether_fcc_info_s *efis = dev->priv; + volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); + + fecp->fec_r_cntrl |= FEC_RCNTRL_DRT; + fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */ +} + +static void fec_pin_init(int fecidx) +{ + bd_t *bd = gd->bd; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile fec_t *fecp; + + /* + * only two FECs please + */ + if ((unsigned int)fecidx >= 2) + hang(); + + if (fecidx == 0) + fecp = &immr->im_cpm.cp_fec1; + else + fecp = &immr->im_cpm.cp_fec2; + + /* + * Set MII speed to 2.5 MHz or slightly below. + * * According to the MPC860T (Rev. D) Fast ethernet controller user + * * manual (6.2.14), + * * the MII management interface clock must be less than or equal + * * to 2.5 MHz. + * * This MDC frequency is equal to system clock / (2 * MII_SPEED). + * * Then MII_SPEED = system_clock / 2 * 2,5 MHz. + * + * All MII configuration is done via FEC1 registers: + */ + immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; + +#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) + /* our PHYs are the limit at 2.5 MHz */ + fecp->fec_mii_speed <<= 1; +#endif + +#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) + /* use MDC for MII */ + immr->im_ioport.iop_pdpar |= 0x0080; + immr->im_ioport.iop_pddir &= ~0x0080; +#endif + + if (fecidx == 0) { +#if defined(CONFIG_ETHER_ON_FEC1) + +#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ + +#if !defined(CONFIG_RMII) + + immr->im_ioport.iop_papar |= 0xf830; + immr->im_ioport.iop_padir |= 0x0830; + immr->im_ioport.iop_padir &= ~0xf000; + + immr->im_cpm.cp_pbpar |= 0x00001001; + immr->im_cpm.cp_pbdir &= ~0x00001001; + + immr->im_ioport.iop_pcpar |= 0x000c; + immr->im_ioport.iop_pcdir &= ~0x000c; + + immr->im_cpm.cp_pepar |= 0x00000003; + immr->im_cpm.cp_pedir |= 0x00000003; + immr->im_cpm.cp_peso &= ~0x00000003; + + immr->im_cpm.cp_cptr &= ~0x00000100; + +#else + +#if !defined(CONFIG_FEC1_PHY_NORXERR) + immr->im_ioport.iop_papar |= 0x1000; + immr->im_ioport.iop_padir &= ~0x1000; +#endif + immr->im_ioport.iop_papar |= 0xe810; + immr->im_ioport.iop_padir |= 0x0810; + immr->im_ioport.iop_padir &= ~0xe000; + + immr->im_cpm.cp_pbpar |= 0x00000001; + immr->im_cpm.cp_pbdir &= ~0x00000001; + + immr->im_cpm.cp_cptr |= 0x00000100; + immr->im_cpm.cp_cptr &= ~0x00000050; + +#endif /* !CONFIG_RMII */ + +#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210) + /* + * Configure all of port D for MII. + */ + immr->im_ioport.iop_pdpar = 0x1fff; + + /* + * Bits moved from Rev. D onward + */ + if ((get_immr(0) & 0xffff) < 0x0501) + immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ + else + immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ +#else + /* + * Configure port A for MII. + */ + +#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY) + + /* + * On the ICU862 board the MII-MDC pin is routed to PD8 pin + * * of CPU, so for this board we need to configure Utopia and + * * enable PD8 to MII-MDC function + */ + immr->im_ioport.iop_pdpar |= 0x4080; +#endif + + /* + * Has Utopia been configured? + */ + if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) { + /* + * YES - Use MUXED mode for UTOPIA bus. + * This frees Port A for use by MII (see 862UM table 41-6). + */ + immr->im_ioport.utmode &= ~0x80; + } else { + /* + * NO - set SPLIT mode for UTOPIA bus. + * + * This doesn't really effect UTOPIA (which isn't + * enabled anyway) but just tells the 862 + * to use port A for MII (see 862UM table 41-6). + */ + immr->im_ioport.utmode |= 0x80; + } +#endif /* !defined(CONFIG_ICU862) */ + +#endif /* CONFIG_ETHER_ON_FEC1 */ + } else if (fecidx == 1) { + +#if defined(CONFIG_ETHER_ON_FEC2) + +#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ + +#if !defined(CONFIG_RMII) + immr->im_cpm.cp_pepar |= 0x0003fffc; + immr->im_cpm.cp_pedir |= 0x0003fffc; + immr->im_cpm.cp_peso &= ~0x000087fc; + immr->im_cpm.cp_peso |= 0x00037800; + + immr->im_cpm.cp_cptr &= ~0x00000080; +#else + +#if !defined(CONFIG_FEC2_PHY_NORXERR) + immr->im_cpm.cp_pepar |= 0x00000010; + immr->im_cpm.cp_pedir |= 0x00000010; + immr->im_cpm.cp_peso &= ~0x00000010; +#endif + immr->im_cpm.cp_pepar |= 0x00039620; + immr->im_cpm.cp_pedir |= 0x00039620; + immr->im_cpm.cp_peso |= 0x00031000; + immr->im_cpm.cp_peso &= ~0x00008620; + + immr->im_cpm.cp_cptr |= 0x00000080; + immr->im_cpm.cp_cptr &= ~0x00000028; +#endif /* CONFIG_RMII */ + +#endif /* CONFIG_MPC885_FAMILY */ + +#endif /* CONFIG_ETHER_ON_FEC2 */ + + } +} + +static int fec_reset(volatile fec_t *fecp) +{ + int i; + + /* Whack a reset. + * A delay is required between a reset of the FEC block and + * initialization of other FEC registers because the reset takes + * some time to complete. If you don't delay, subsequent writes + * to FEC registers might get killed by the reset routine which is + * still in progress. + */ + + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; + for (i = 0; + (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); + ++i) { + udelay (1); + } + if (i == FEC_RESET_DELAY) + return -1; + + return 0; +} + +static int fec_init (struct eth_device *dev, bd_t * bd) +{ + struct ether_fcc_info_s *efis = dev->priv; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile fec_t *fecp = + (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); + int i; + + if (efis->ether_index == 0) { +#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */ +#if defined(CONFIG_MPC885ADS) + *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST); +#else + /* configure FADS for fast (FEC) ethernet, half-duplex */ + /* The LXT970 needs about 50ms to recover from reset, so + * wait for it by discovering the PHY before leaving eth_init(). + */ + { + volatile uint *bcsr4 = (volatile uint *) BCSR4; + + *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1)) + | (BCSR4_FETHCFG0 | BCSR4_FETHFDE | + BCSR4_FETHRST); + + /* reset the LXT970 PHY */ + *bcsr4 &= ~BCSR4_FETHRST; + udelay (10); + *bcsr4 |= BCSR4_FETHRST; + udelay (10); + } +#endif /* CONFIG_MPC885ADS */ +#endif /* CONFIG_FADS */ + } + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + /* the MII interface is connected to FEC1 + * so for the miiphy_xxx function to work we must + * call mii_init since fec_halt messes the thing up + */ + if (efis->ether_index != 0) + __mii_init(); +#endif + + if (fec_reset(fecp) < 0) + printf ("FEC_RESET_DELAY timeout\n"); + + /* We use strictly polling mode only + */ + fecp->fec_imask = 0; + + /* Clear any pending interrupt + */ + fecp->fec_ievent = 0xffc0; + + /* No need to set the IVEC register */ + + /* Set station address + */ +#define ea dev->enetaddr + fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->fec_addr_high = (ea[4] << 8) | (ea[5]); +#undef ea + +#if defined(CONFIG_CMD_CDP) + /* + * Turn on multicast address hash table + */ + fecp->fec_hash_table_high = 0xffffffff; + fecp->fec_hash_table_low = 0xffffffff; +#else + /* Clear multicast address hash table + */ + fecp->fec_hash_table_high = 0; + fecp->fec_hash_table_low = 0; +#endif + + /* Set maximum receive buffer size. + */ + fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; + + /* Set maximum frame length + */ + fecp->fec_r_hash = PKT_MAXBUF_SIZE; + + /* + * Setup Buffers and Buffer Desriptors + */ + rxIdx = 0; + txIdx = 0; + + if (!rtx) { +#ifdef CONFIG_SYS_ALLOC_DPRAM + rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + + dpram_alloc_align (sizeof (RTXBD), 8)); +#else + rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE); +#endif + } + /* + * Setup Receiver Buffer Descriptors (13.14.24.18) + * Settings: + * Empty, Wrap + */ + for (i = 0; i < PKTBUFSRX; i++) { + rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + rtx->rxbd[i].cbd_datlen = 0; /* Reset */ + rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; + } + rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; + + /* + * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) + * Settings: + * Last, Tx CRC + */ + for (i = 0; i < TX_BUF_CNT; i++) { + rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; + rtx->txbd[i].cbd_datlen = 0; /* Reset */ + rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); + } + rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; + + /* Set receive and transmit descriptor base + */ + fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]); + fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]); + + /* Enable MII mode + */ +#if 0 /* Full duplex mode */ + fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; + fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; +#else /* Half duplex mode */ + fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; + fecp->fec_x_cntrl = 0; +#endif + + /* Enable big endian and don't care about SDMA FC. + */ + fecp->fec_fun_code = 0x78000000; + + /* + * Setup the pin configuration of the FEC + */ + fec_pin_init (efis->ether_index); + + rxIdx = 0; + txIdx = 0; + + /* + * Now enable the transmit and receive processing + */ + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; + + if (efis->phy_addr == -1) { +#ifdef CONFIG_SYS_DISCOVER_PHY + /* + * wait for the PHY to wake up after reset + */ + efis->actual_phy_addr = mii_discover_phy (dev); + + if (efis->actual_phy_addr == -1) { + printf ("Unable to discover phy!\n"); + return -1; + } +#else + efis->actual_phy_addr = -1; +#endif + } else { + efis->actual_phy_addr = efis->phy_addr; + } + +#if defined(CONFIG_MII) && defined(CONFIG_RMII) + /* + * adapt the RMII speed to the speed of the phy + */ + if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) { + fec_100Mbps (dev); + } else { + fec_10Mbps (dev); + } +#endif + +#if defined(CONFIG_MII) + /* + * adapt to the half/full speed settings + */ + if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) { + fec_full_duplex (dev); + } else { + fec_half_duplex (dev); + } +#endif + + /* And last, try to fill Rx Buffer Descriptors */ + fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ + + efis->initialized = 1; + + return 0; +} + + +static void fec_halt(struct eth_device* dev) +{ + struct ether_fcc_info_s *efis = dev->priv; + volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); + int i; + + /* avoid halt if initialized; mii gets stuck otherwise */ + if (!efis->initialized) + return; + + /* Whack a reset. + * A delay is required between a reset of the FEC block and + * initialization of other FEC registers because the reset takes + * some time to complete. If you don't delay, subsequent writes + * to FEC registers might get killed by the reset routine which is + * still in progress. + */ + + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; + for (i = 0; + (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); + ++i) { + udelay (1); + } + if (i == FEC_RESET_DELAY) { + printf ("FEC_RESET_DELAY timeout\n"); + return; + } + + efis->initialized = 0; +} + +#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + +/* Make MII read/write commands for the FEC. +*/ + +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ + (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ + (REG & 0x1f) << 18) | \ + (VAL & 0xffff)) + +/* Interrupt events/masks. +*/ +#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ +#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ +#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ +#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ +#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ +#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ +#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ +#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ +#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ +#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ + +/* PHY identification + */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */ +#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */ + +/* send command to phy using mii, wait for result */ +static uint +mii_send(uint mii_cmd) +{ + uint mii_reply; + volatile fec_t *ep; + int cnt; + + ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec); + + ep->fec_mii_data = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + cnt = 0; + while (!(ep->fec_ievent & FEC_ENET_MII)) { + if (++cnt > 1000) { + printf("mii_send STUCK!\n"); + break; + } + } + mii_reply = ep->fec_mii_data; /* result from phy */ + ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */ +#if 0 + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply); +#endif + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif + +#if defined(CONFIG_SYS_DISCOVER_PHY) +static int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + uint phyno; + int pass; + uint phytype; + int phyaddr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type ", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype |= mii_send(mk_mii_read(phyno, + PHY_PHYIDR1)) << 16; + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ",phyno,pass); + switch (phytype & 0xfffffff0) { + case PHY_ID_LXT970: + printf("LXT970\n"); + break; + case PHY_ID_LXT971: + printf("LXT971\n"); + break; + case PHY_ID_82555: + printf("82555\n"); + break; + case PHY_ID_QS6612: + printf("QS6612\n"); + break; + case PHY_ID_AMD79C784: + printf("AMD79C784\n"); + break; + case PHY_ID_LSI80225B: + printf("LSI L80225/B\n"); + break; + case PHY_ID_DM9161: + printf("Davicom DM9161\n"); + break; + case PHY_ID_KSM8995M: + printf("MICREL KS8995M\n"); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) { + printf("No PHY device found.\n"); + } + return phyaddr; +} +#endif /* CONFIG_SYS_DISCOVER_PHY */ + +#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII) + +/**************************************************************************** + * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +static void __mii_init(void) +{ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile fec_t *fecp = &(immr->im_cpm.cp_fec); + + if (fec_reset(fecp) < 0) + printf ("FEC_RESET_DELAY timeout\n"); + + /* We use strictly polling mode only + */ + fecp->fec_imask = 0; + + /* Clear any pending interrupt + */ + fecp->fec_ievent = 0xffc0; + + /* Now enable the transmit and receive processing + */ + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; +} + +void mii_init (void) +{ + int i; + + __mii_init(); + + /* Setup the pin configuration of the FEC(s) + */ + for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) + fec_pin_init(ether_fcc_info[i].ether_index); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int fec8xx_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; +#ifdef MII_DEBUG + printf ("0x%04x\n", *value); +#endif + return 0; +} + +int fec8xx_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + short rdreg; /* register working value */ +#ifdef MII_DEBUG + printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf ("0x%04x\n", value); +#endif + return 0; +} +#endif + +#endif |