diff options
Diffstat (limited to 'arch/ppc/cpu/ppc4xx/usbdev.c')
| -rw-r--r-- | arch/ppc/cpu/ppc4xx/usbdev.c | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/arch/ppc/cpu/ppc4xx/usbdev.c b/arch/ppc/cpu/ppc4xx/usbdev.c new file mode 100644 index 0000000..fe398af --- /dev/null +++ b/arch/ppc/cpu/ppc4xx/usbdev.c @@ -0,0 +1,230 @@ +/*USB 1.1,2.0 device*/ + +#include <common.h> +#include <asm/processor.h> + +#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB) + +#include <usb.h> +#include <asm/ppc4xx-uic.h> +#include "usbdev.h" + +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 + +int set_value = -1; + +void process_endpoints(unsigned short usb2d0_intrin) +{ + /*will hold the packet received */ + struct usb_device_descriptor usb_device_packet; + struct usb_configuration_descriptor usb_config_packet; + struct usb_string_descriptor usb_string_packet; + struct devrequest setup_packet; + unsigned int *setup_packet_pt; + unsigned char *packet_pt = NULL; + int temp, temp1; + + int i; + + /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */ + + /*set usb address, seems to not work unless it is done in the next + interrupt, so that is why it is done this way */ + if (set_value != -1) + *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value; + + /*endpoint 1 */ + if (usb2d0_intrin & 0x01) { + setup_packet_pt = (unsigned int *)&setup_packet; + + /*copy packet */ + setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0; + setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0; + temp = *(unsigned int *)USB2D0_FIFO_0; + temp1 = *(unsigned int *)USB2D0_FIFO_0; + + /*do some swapping */ + setup_packet.value = swap_16(setup_packet.value); + setup_packet.index = swap_16(setup_packet.index); + setup_packet.length = swap_16(setup_packet.length); + + /*clear rx packet */ + *(unsigned short *)USB2D0_INCSR0_8 = 0x48; + + /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype, + setup_packet.request, setup_packet.value, + setup_packet.index, setup_packet.length, temp, temp1 ); */ + + switch (setup_packet.request) { + case USB_REQ_GET_DESCRIPTOR: + + switch (setup_packet.value >> 8) { + case USB_DT_DEVICE: + /*create packet */ + usb_device_packet.bLength = 18; + usb_device_packet.bDescriptorType = + USB_DT_DEVICE; +#ifdef USB_2_0_DEVICE + usb_device_packet.bcdUSB = swap_16(0x200); +#else + usb_device_packet.bcdUSB = swap_16(0x110); +#endif + usb_device_packet.bDeviceClass = 0xff; + usb_device_packet.bDeviceSubClass = 0; + usb_device_packet.bDeviceProtocol = 0; + usb_device_packet.bMaxPacketSize0 = 32; + usb_device_packet.idVendor = swap_16(1); + usb_device_packet.idProduct = swap_16(2); + usb_device_packet.bcdDevice = swap_16(0x300); + usb_device_packet.iManufacturer = 1; + usb_device_packet.iProduct = 1; + usb_device_packet.iSerialNumber = 1; + usb_device_packet.bNumConfigurations = 1; + + /*put packet in fifo */ + packet_pt = (unsigned char *)&usb_device_packet; + break; + + case USB_DT_CONFIG: + /*create packet */ + usb_config_packet.bLength = 9; + usb_config_packet.bDescriptorType = + USB_DT_CONFIG; + usb_config_packet.wTotalLength = swap_16(25); + usb_config_packet.bNumInterfaces = 1; + usb_config_packet.bConfigurationValue = 1; + usb_config_packet.iConfiguration = 0; + usb_config_packet.bmAttributes = 0x40; + usb_config_packet.bMaxPower = 0; + + /*put packet in fifo */ + packet_pt = (unsigned char *)&usb_config_packet; + break; + + case USB_DT_STRING: + /*create packet */ + usb_string_packet.bLength = 2; + usb_string_packet.bDescriptorType = + USB_DT_STRING; + usb_string_packet.wData[0] = 0x0094; + + /*put packet in fifo */ + packet_pt = (unsigned char *)&usb_string_packet; + break; + } + + /*put packet in fifo */ + for (i = 0; i < (setup_packet.length); i++) { + *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i]; + } + + /*give tx command */ + *(unsigned short *)USB2D0_INCSR0_8 = 0x0a; + + break; + + case USB_REQ_SET_ADDRESS: + + /*copy usb address */ + set_value = setup_packet.value; + + break; + } + + } +} + +void process_other(unsigned char usb2d0_intrusb) +{ + + /*check for sof */ + if (usb2d0_intrusb & 0x08) { + /*printf("{USB device} - sof detected\n"); */ + } + + /*check for reset */ + if (usb2d0_intrusb & 0x04) { + /*printf("{USB device} - reset detected\n"); */ + + /*copy usb address of zero, need to do this when usb reset */ + set_value = 0; + } + + if (usb2d0_intrusb & 0x02) { + /*printf("{USB device} - resume detected\n"); */ + } + + if (usb2d0_intrusb & 0x01) { + /*printf("{USB device} - suspend detected\n"); */ + } +} + +int usbInt(void) +{ + /*Must read these 2 registers and use values to clear interrupts. If you + do not read them then the interrupt will not be cleared. If you do not + use the variable the optimizer will not do a read. */ + volatile unsigned short usb2d0_intrin = + *(unsigned short *)USB2D0_INTRIN_16; + volatile unsigned char usb2d0_intrusb = + *(unsigned char *)USB2D0_INTRUSB_8; + + /*check if there was an endpoint interrupt */ + if (usb2d0_intrin != 0) { + process_endpoints(usb2d0_intrin); + } + + /*check for other interrupts */ + if (usb2d0_intrusb != 0) { + process_other(usb2d0_intrusb); + } + + return 0; +} + +#if defined(CONFIG_440EPX) +void usb_dev_init() +{ + printf("USB 2.0 Device init\n"); + + /*usb dev init */ + *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */ + + /*enable interrupts */ + *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f; + + irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt, + NULL); +} +#else +void usb_dev_init() +{ +#ifdef USB_2_0_DEVICE + printf("USB 2.0 Device init\n"); + /*select 2.0 device */ + mtsdr(SDR0_USB0, 0x0); /* 2.0 */ + + /*usb dev init */ + *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */ +#else + printf("USB 1.1 Device init\n"); + /*select 1.1 device */ + mtsdr(SDR0_USB0, 0x2); /* 1.1 */ + + /*usb dev init */ + *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */ +#endif + + /*enable interrupts */ + *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f; + + irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt, + NULL); +} +#endif + +#endif /* CONFIG_440EP || CONFIG_440EPX */ |