1 files changed, 0 insertions, 95 deletions
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
deleted file mode 100644
index 4f29932..0000000
--- a/board/amcc/walnut/walnut.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-int board_early_init_f(void)
-{
-	/*-------------------------------------------------------------------------+
-	  | Interrupt controller setup for the Walnut/Sycamore board.
-	  | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-	  |       IRQ 16    405GP internally generated; active low; level sensitive
-	  |       IRQ 17-24 RESERVED
-	  |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
-	  |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
-	  |       IRQ 27 (EXT IRQ 2) Not Used
-	  |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-	  |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	  |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-	  |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-	  | Note for Walnut board:
-	  |       An interrupt taken for the FPGA (IRQ 25) indicates that either
-	  |       the Mouse, Keyboard, IRDA, or External Expansion caused the
-	  |       interrupt. The FPGA must be read to determine which device
-	  |       caused the interrupt. The default setting of the FPGA clears
-	  |
-	  +-------------------------------------------------------------------------*/
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000020);	/* set all but FPGA SMI to be non-critical */
-	mtdcr(UIC0PR, 0xFFFFFFE0);	/* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC       0xF0300004
-	*(volatile char *)(FPGA_BRDC) |= 0x1;
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-	uint pvr = get_pvr();
-
-	if (pvr == PVR_405GPR_RB) {
-		puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
-	} else {
-		puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
-	}
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/*
- * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
- * the necessary info for SDRAM controller configuration
- */
-phys_size_t initdram(int board_type)
-{
-	return spd_sdram();
-}