diff options
Diffstat (limited to 'board/tqc/tqm834x/pci.c')
| -rw-r--r-- | board/tqc/tqm834x/pci.c | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/board/tqc/tqm834x/pci.c b/board/tqc/tqm834x/pci.c new file mode 100644 index 0000000..e3d0309 --- /dev/null +++ b/board/tqc/tqm834x/pci.c @@ -0,0 +1,220 @@ +/* + * (C) Copyright 2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <asm/mmu.h> +#include <common.h> +#include <pci.h> + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_tqm834x_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci1_hose = { +#ifndef CONFIG_PCI_PNP + config_table:pci_tqm834x_config_table, +#endif +}; + + +/************************************************************************** + * pci_init_board() + * + * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since + * per TQM834x design physical connections to external devices (PCI sockets) + * are routed only to the PCI1 we do not account for the second one - this code + * supports PCI1 module only. Should support for the PCI2 be required in the + * future it needs a separate pci_controller structure (above) and handling - + * please refer to other boards' implementation for dual PCI host controllers, + * for example board/Marvell/db64360/pci.c, pci_init_board() + * + */ +void +pci_init_board(void) +{ + volatile immap_t * immr; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMR; + clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci1_hose; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT + */ + + /* + * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one + * line actually used for clocking all external PCI devices in TQM83xx. + * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for + * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7 + * are known to hang the board; this issue is under investigation + * (13 oct 05) + */ + reg32 = OCCR_PCICOE1; +#if 0 + /* enabling all PCI_CLK_OUTPUT lines HANGS the board... */ + reg32 = 0xff000000; +#endif + if (clk->spmr & SPMR_CKID) { + /* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR + * fields accordingly */ + reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR); + + reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \ + | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \ + | OCCR_PCICD6 | OCCR_PCICD7); + } + + clk->occr = reg32; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_256M; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 2, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + CONFIG_PCI_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 3; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND, + ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND, + reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS, + 0xffff); + pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER, + 0x80); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCI */ |