summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/ether.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/ether.c')
-rw-r--r--drivers/usb/gadget/ether.c1976
1 files changed, 1976 insertions, 0 deletions
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
new file mode 100644
index 0000000..bc6480c
--- /dev/null
+++ b/drivers/usb/gadget/ether.c
@@ -0,0 +1,1976 @@
+/*
+ * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/gadget.h>
+#include <net.h>
+#include <linux/ctype.h>
+
+#include "gadget_chips.h"
+
+#define USB_NET_NAME "usb0"
+
+#define atomic_read
+extern struct platform_data brd;
+#define spin_lock(x)
+#define spin_unlock(x)
+
+
+unsigned packet_received, packet_sent;
+
+#define DEV_CONFIG_CDC 1
+#define GFP_ATOMIC ((gfp_t) 0)
+#define GFP_KERNEL ((gfp_t) 0)
+
+/*
+ * Ethernet gadget driver -- with CDC and non-CDC options
+ * Builds on hardware support for a full duplex link.
+ *
+ * CDC Ethernet is the standard USB solution for sending Ethernet frames
+ * using USB. Real hardware tends to use the same framing protocol but look
+ * different for control features. This driver strongly prefers to use
+ * this USB-IF standard as its open-systems interoperability solution;
+ * most host side USB stacks (except from Microsoft) support it.
+ *
+ * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
+ * TLA-soup. "CDC ACM" (Abstract Control Model) is for modems, and a new
+ * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
+ *
+ * There's some hardware that can't talk CDC ECM. We make that hardware
+ * implement a "minimalist" vendor-agnostic CDC core: same framing, but
+ * link-level setup only requires activating the configuration. Only the
+ * endpoint descriptors, and product/vendor IDs, are relevant; no control
+ * operations are available. Linux supports it, but other host operating
+ * systems may not. (This is a subset of CDC Ethernet.)
+ *
+ * It turns out that if you add a few descriptors to that "CDC Subset",
+ * (Windows) host side drivers from MCCI can treat it as one submode of
+ * a proprietary scheme called "SAFE" ... without needing to know about
+ * specific product/vendor IDs. So we do that, making it easier to use
+ * those MS-Windows drivers. Those added descriptors make it resemble a
+ * CDC MDLM device, but they don't change device behavior at all. (See
+ * MCCI Engineering report 950198 "SAFE Networking Functions".)
+ *
+ * A third option is also in use. Rather than CDC Ethernet, or something
+ * simpler, Microsoft pushes their own approach: RNDIS. The published
+ * RNDIS specs are ambiguous and appear to be incomplete, and are also
+ * needlessly complex. They borrow more from CDC ACM than CDC ECM.
+ */
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN 4 /* Octets in the FCS */
+
+#define DRIVER_DESC "Ethernet Gadget"
+/* Based on linux 2.6.27 version */
+#define DRIVER_VERSION "May Day 2005"
+
+static const char shortname[] = "ether";
+static const char driver_desc[] = DRIVER_DESC;
+
+#define RX_EXTRA 20 /* guard against rx overflows */
+
+/* CDC support the same host-chosen outgoing packet filters. */
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+#define USB_CONNECT_TIMEOUT (3 * CONFIG_SYS_HZ)
+
+/*-------------------------------------------------------------------------*/
+static struct eth_dev l_ethdev;
+static struct eth_device l_netdev;
+static struct usb_gadget_driver eth_driver;
+
+/*-------------------------------------------------------------------------*/
+
+/* "main" config is either CDC, or its simple subset */
+static inline int is_cdc(struct eth_dev *dev)
+{
+#if !defined(DEV_CONFIG_SUBSET)
+ return 1; /* only cdc possible */
+#elif !defined(DEV_CONFIG_CDC)
+ return 0; /* only subset possible */
+#else
+ return dev->cdc; /* depends on what hardware we found */
+#endif
+}
+
+#define subset_active(dev) (!is_cdc(dev))
+#define cdc_active(dev) (is_cdc(dev))
+
+#define DEFAULT_QLEN 2 /* double buffering by default */
+
+/* peak bulk transfer bits-per-second */
+#define HS_BPS (13 * 512 * 8 * 1000 * 8)
+#define FS_BPS (19 * 64 * 1 * 1000 * 8)
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+#define DEVSPEED USB_SPEED_HIGH
+
+#ifdef CONFIG_USB_ETH_QMULT
+#define qmult CONFIG_USB_ETH_QMULT
+#else
+#define qmult 5
+#endif
+
+/* for dual-speed hardware, use deeper queues at highspeed */
+#define qlen(gadget) \
+ (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
+
+static inline int BITRATE(struct usb_gadget *g)
+{
+ return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
+}
+
+#else /* full speed (low speed doesn't do bulk) */
+
+#define qmult 1
+
+#define DEVSPEED USB_SPEED_FULL
+
+#define qlen(gadget) DEFAULT_QLEN
+
+static inline int BITRATE(struct usb_gadget *g)
+{
+ return FS_BPS;
+}
+#endif
+
+struct eth_dev {
+ struct usb_gadget *gadget;
+ struct usb_request *req; /* for control responses */
+ struct usb_request *stat_req; /* for cdc status */
+
+ u8 config;
+ struct usb_ep *in_ep, *out_ep, *status_ep;
+ const struct usb_endpoint_descriptor
+ *in, *out, *status;
+
+ struct usb_request *tx_req, *rx_req;
+
+ struct eth_device *net;
+ unsigned int tx_qlen;
+
+ unsigned zlp:1;
+ unsigned cdc:1;
+ unsigned suspended:1;
+ unsigned network_started:1;
+ u16 cdc_filter;
+ unsigned long todo;
+ int mtu;
+#define WORK_RX_MEMORY 0
+ u8 host_mac[ETH_ALEN];
+};
+
+/*
+ * This version autoconfigures as much as possible at run-time.
+ *
+ * It also ASSUMES a self-powered device, without remote wakeup,
+ * although remote wakeup support would make sense.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM 0x0525 /* NetChip */
+#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
+
+/*
+ * For hardware that can't talk CDC, we use the same vendor ID that
+ * ARM Linux has used for ethernet-over-usb, both with sa1100 and
+ * with pxa250. We're protocol-compatible, if the host-side drivers
+ * use the endpoint descriptors. bcdDevice (version) is nonzero, so
+ * drivers that need to hard-wire endpoint numbers have a hook.
+ *
+ * The protocol is a minimal subset of CDC Ether, which works on any bulk
+ * hardware that's not deeply broken ... even on hardware that can't talk
+ * RNDIS (like SA-1100, with no interrupt endpoint, or anything that
+ * doesn't handle control-OUT).
+ */
+#define SIMPLE_VENDOR_NUM 0x049f
+#define SIMPLE_PRODUCT_NUM 0x505a
+
+/*
+ * Some systems will want different product identifers published in the
+ * device descriptor, either numbers or strings or both. These string
+ * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+static ushort bcdDevice;
+#if defined(CONFIG_USBNET_MANUFACTURER)
+static char *iManufacturer = CONFIG_USBNET_MANUFACTURER;
+#else
+static char *iManufacturer = "U-boot";
+#endif
+static char *iProduct;
+static char *iSerialNumber;
+static char dev_addr[18];
+static char host_addr[18];
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB DRIVER HOOKUP (to the hardware driver, below us), mostly
+ * ep0 implementation: descriptors, config management, setup().
+ * also optional class-specific notification interrupt transfer.
+ */
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand. For now we do either full CDC, or
+ * our simple subset.
+ */
+
+#define STRING_MANUFACTURER 1
+#define STRING_PRODUCT 2
+#define STRING_ETHADDR 3
+#define STRING_DATA 4
+#define STRING_CONTROL 5
+#define STRING_CDC 7
+#define STRING_SUBSET 8
+#define STRING_SERIALNUMBER 10
+
+/* holds our biggest descriptor */
+#define USB_BUFSIZ 256
+
+/*
+ * This device advertises one configuration, eth_config,
+ * on hardware supporting at least two configs.
+ *
+ * FIXME define some higher-powered configurations to make it easier
+ * to recharge batteries ...
+ */
+
+#define DEV_CONFIG_VALUE 1 /* cdc or subset */
+
+static struct usb_device_descriptor
+device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+
+ .bDeviceClass = USB_CLASS_COMM,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+
+ .idVendor = __constant_cpu_to_le16(CDC_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(CDC_PRODUCT_NUM),
+ .iManufacturer = STRING_MANUFACTURER,
+ .iProduct = STRING_PRODUCT,
+ .bNumConfigurations = 1,
+};
+
+static struct usb_otg_descriptor
+otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ .bmAttributes = USB_OTG_SRP,
+};
+
+static struct usb_config_descriptor
+eth_config = {
+ .bLength = sizeof eth_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 2,
+ .bConfigurationValue = DEV_CONFIG_VALUE,
+ .iConfiguration = STRING_CDC,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1,
+};
+
+/*
+ * Compared to the simple CDC subset, the full CDC Ethernet model adds
+ * three class descriptors, two interface descriptors, optional status
+ * endpoint. Both have a "data" interface and two bulk endpoints.
+ * There are also differences in how control requests are handled.
+ */
+
+#ifdef DEV_CONFIG_CDC
+static struct usb_interface_descriptor
+control_intf = {
+ .bLength = sizeof control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 0,
+ /* status endpoint is optional; this may be patched later */
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ .iInterface = STRING_CONTROL,
+};
+#endif
+
+static const struct usb_cdc_header_desc header_desc = {
+ .bLength = sizeof header_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
+};
+
+#if defined(DEV_CONFIG_CDC)
+
+static const struct usb_cdc_union_desc union_desc = {
+ .bLength = sizeof union_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+
+ .bMasterInterface0 = 0, /* index of control interface */
+ .bSlaveInterface0 = 1, /* index of DATA interface */
+};
+
+#endif /* CDC */
+
+#ifndef DEV_CONFIG_CDC
+
+/*
+ * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
+ * ways: data endpoints live in the control interface, there's no data
+ * interface, and it's not used to talk to a cell phone radio.
+ */
+
+static const struct usb_cdc_mdlm_desc mdlm_desc = {
+ .bLength = sizeof mdlm_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_MDLM_TYPE,
+
+ .bcdVersion = __constant_cpu_to_le16(0x0100),
+ .bGUID = {
+ 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+ 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+ },
+};
+
+/*
+ * since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
+ * can't really use its struct. All we do here is say that we're using
+ * the submode of "SAFE" which directly matches the CDC Subset.
+ */
+static const u8 mdlm_detail_desc[] = {
+ 6,
+ USB_DT_CS_INTERFACE,
+ USB_CDC_MDLM_DETAIL_TYPE,
+
+ 0, /* "SAFE" */
+ 0, /* network control capabilities (none) */
+ 0, /* network data capabilities ("raw" encapsulation) */
+};
+
+#endif
+
+static const struct usb_cdc_ether_desc ether_desc = {
+ .bLength = sizeof(ether_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
+
+ /* this descriptor actually adds value, surprise! */
+ .iMACAddress = STRING_ETHADDR,
+ .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
+ .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN),
+ .wNumberMCFilters = __constant_cpu_to_le16(0),
+ .bNumberPowerFilters = 0,
+};
+
+#if defined(DEV_CONFIG_CDC)
+
+/*
+ * include the status endpoint if we can, even where it's optional.
+ * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
+ * waste less bandwidth.
+ *
+ * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
+ * if they ignore the connect/disconnect notifications that real aether
+ * can provide. more advanced cdc configurations might want to support
+ * encapsulated commands (vendor-specific, using control-OUT).
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
+
+static struct usb_endpoint_descriptor
+fs_status_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+#endif
+
+#ifdef DEV_CONFIG_CDC
+
+/* the default data interface has no endpoints ... */
+
+static const struct usb_interface_descriptor
+data_nop_intf = {
+ .bLength = sizeof data_nop_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static const struct usb_interface_descriptor
+data_intf = {
+ .bLength = sizeof data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = STRING_DATA,
+};
+
+#endif
+
+#ifdef DEV_CONFIG_SUBSET
+
+/*
+ * "Simple" CDC-subset option is a simple vendor-neutral model that most
+ * full speed controllers can handle: one interface, two bulk endpoints.
+ *
+ * To assist host side drivers, we fancy it up a bit, and add descriptors
+ * so some host side drivers will understand it as a "SAFE" variant.
+ */
+
+static const struct usb_interface_descriptor
+subset_data_intf = {
+ .bLength = sizeof subset_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM,
+ .bInterfaceProtocol = 0,
+ .iInterface = STRING_DATA,
+};
+
+#endif /* SUBSET */
+
+static struct usb_endpoint_descriptor
+fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static const struct usb_descriptor_header *fs_eth_function[11] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+#ifdef DEV_CONFIG_CDC
+ /* "cdc" mode descriptors */
+ (struct usb_descriptor_header *) &control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &union_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ /* NOTE: status endpoint may need to be removed */
+ (struct usb_descriptor_header *) &fs_status_desc,
+ /* data interface, with altsetting */
+ (struct usb_descriptor_header *) &data_nop_intf,
+ (struct usb_descriptor_header *) &data_intf,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ NULL,
+#endif /* DEV_CONFIG_CDC */
+};
+
+static inline void fs_subset_descriptors(void)
+{
+#ifdef DEV_CONFIG_SUBSET
+ /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
+ fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
+ fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
+ fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
+ fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
+ fs_eth_function[5] = (struct usb_descriptor_header *) &ether_desc;
+ fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc;
+ fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc;
+ fs_eth_function[8] = NULL;
+#else
+ fs_eth_function[1] = NULL;
+#endif
+}
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ */
+
+#if defined(DEV_CONFIG_CDC)
+static struct usb_endpoint_descriptor
+hs_status_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+#endif /* DEV_CONFIG_CDC */
+
+static struct usb_endpoint_descriptor
+hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor
+hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_qualifier_descriptor
+dev_qualifier = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_COMM,
+
+ .bNumConfigurations = 1,
+};
+
+static const struct usb_descriptor_header *hs_eth_function[11] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+#ifdef DEV_CONFIG_CDC
+ /* "cdc" mode descriptors */
+ (struct usb_descriptor_header *) &control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &union_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ /* NOTE: status endpoint may need to be removed */
+ (struct usb_descriptor_header *) &hs_status_desc,
+ /* data interface, with altsetting */
+ (struct usb_descriptor_header *) &data_nop_intf,
+ (struct usb_descriptor_header *) &data_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+#endif /* DEV_CONFIG_CDC */
+};
+
+static inline void hs_subset_descriptors(void)
+{
+#ifdef DEV_CONFIG_SUBSET
+ /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
+ hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
+ hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
+ hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
+ hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
+ hs_eth_function[5] = (struct usb_descriptor_header *) &ether_desc;
+ hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc;
+ hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc;
+ hs_eth_function[8] = NULL;
+#else
+ hs_eth_function[1] = NULL;
+#endif
+}
+
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* descriptors that are built on-demand */
+
+static char manufacturer[50];
+static char product_desc[40] = DRIVER_DESC;
+static char serial_number[20];
+
+/* address that the host will use ... usually assigned at random */
+static char ethaddr[2 * ETH_ALEN + 1];
+
+/* static strings, in UTF-8 */
+static struct usb_string strings[] = {
+ { STRING_MANUFACTURER, manufacturer, },
+ { STRING_PRODUCT, product_desc, },
+ { STRING_SERIALNUMBER, serial_number, },
+ { STRING_DATA, "Ethernet Data", },
+ { STRING_ETHADDR, ethaddr, },
+#ifdef DEV_CONFIG_CDC
+ { STRING_CDC, "CDC Ethernet", },
+ { STRING_CONTROL, "CDC Communications Control", },
+#endif
+#ifdef DEV_CONFIG_SUBSET
+ { STRING_SUBSET, "CDC Ethernet Subset", },
+#endif
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab = {
+ .language = 0x0409, /* en-us */
+ .strings = strings,
+};
+
+/*============================================================================*/
+static u8 control_req[USB_BUFSIZ];
+static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4)));
+
+
+/**
+ * strlcpy - Copy a %NUL terminated string into a sized buffer
+ * @dest: Where to copy the string to
+ * @src: Where to copy the string from
+ * @size: size of destination buffer
+ *
+ * Compatible with *BSD: the result is always a valid
+ * NUL-terminated string that fits in the buffer (unless,
+ * of course, the buffer size is zero). It does not pad
+ * out the result like strncpy() does.
+ */
+size_t strlcpy(char *dest, const char *src, size_t size)
+{
+ size_t ret = strlen(src);
+
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+ memcpy(dest, src, len);
+ dest[len] = '\0';
+ }
+ return ret;
+}
+
+/*============================================================================*/
+
+/*
+ * one config, two interfaces: control, data.
+ * complications: class descriptors, and an altsetting.
+ */
+static int
+config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
+{
+ int len;
+ const struct usb_config_descriptor *config;
+ const struct usb_descriptor_header **function;
+ int hs = 0;
+
+ if (gadget_is_dualspeed(g)) {
+ hs = (g->speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ }
+#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
+
+ if (index >= device_desc.bNumConfigurations)
+ return -EINVAL;
+
+ config = &eth_config;
+ function = which_fn(eth);
+
+ /* for now, don't advertise srp-only devices */
+ if (!is_otg)
+ function++;
+
+ len = usb_gadget_config_buf(config, buf, USB_BUFSIZ, function);
+ if (len < 0)
+ return len;
+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
+ return len;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
+
+static int
+set_ether_config(struct eth_dev *dev, gfp_t gfp_flags)
+{
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+#if defined(DEV_CONFIG_CDC)
+ /* status endpoint used for (optionally) CDC */
+ if (!subset_active(dev) && dev->status_ep) {
+ dev->status = ep_desc(gadget, &hs_status_desc,
+ &fs_status_desc);
+ dev->status_ep->driver_data = dev;
+
+ result = usb_ep_enable(dev->status_ep, dev->status);
+ if (result != 0) {
+ debug("enable %s --> %d\n",
+ dev->status_ep->name, result);
+ goto done;
+ }
+ }
+#endif
+
+ dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+ dev->in_ep->driver_data = dev;
+
+ dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+ dev->out_ep->driver_data = dev;
+
+ /*
+ * With CDC, the host isn't allowed to use these two data
+ * endpoints in the default altsetting for the interface.
+ * so we don't activate them yet. Reset from SET_INTERFACE.
+ */
+ if (!cdc_active(dev)) {
+ result = usb_ep_enable(dev->in_ep, dev->in);
+ if (result != 0) {
+ debug("enable %s --> %d\n",
+ dev->in_ep->name, result);
+ goto done;
+ }
+
+ result = usb_ep_enable(dev->out_ep, dev->out);
+ if (result != 0) {
+ debug("enable %s --> %d\n",
+ dev->out_ep->name, result);
+ goto done;
+ }
+ }
+
+done:
+ if (result == 0)
+ result = alloc_requests(dev, qlen(gadget), gfp_flags);
+
+ /* on error, disable any endpoints */
+ if (result < 0) {
+ if (!subset_active(dev) && dev->status_ep)
+ (void) usb_ep_disable(dev->status_ep);
+ dev->status = NULL;
+ (void) usb_ep_disable(dev->in_ep);
+ (void) usb_ep_disable(dev->out_ep);
+ dev->in = NULL;
+ dev->out = NULL;
+ }
+
+ /* caller is responsible for cleanup on error */
+ return result;
+}
+
+static void eth_reset_config(struct eth_dev *dev)
+{
+ if (dev->config == 0)
+ return;
+
+ debug("%s\n", __func__);
+
+ /*
+ * disable endpoints, forcing (synchronous) completion of
+ * pending i/o. then free the requests.
+ */
+
+ if (dev->in) {
+ usb_ep_disable(dev->in_ep);
+ if (dev->tx_req) {
+ usb_ep_free_request(dev->in_ep, dev->tx_req);
+ dev->tx_req = NULL;
+ }
+ }
+ if (dev->out) {
+ usb_ep_disable(dev->out_ep);
+ if (dev->rx_req) {
+ usb_ep_free_request(dev->out_ep, dev->rx_req);
+ dev->rx_req = NULL;
+ }
+ }
+ if (dev->status)
+ usb_ep_disable(dev->status_ep);
+
+ dev->cdc_filter = 0;
+ dev->config = 0;
+}
+
+/*
+ * change our operational config. must agree with the code
+ * that returns config descriptors, and altsetting code.
+ */
+static int eth_set_config(struct eth_dev *dev, unsigned number,
+ gfp_t gfp_flags)
+{
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+ if (gadget_is_sa1100(gadget)
+ && dev->config
+ && dev->tx_qlen != 0) {
+ /* tx fifo is full, but we can't clear it...*/
+ error("can't change configurations");
+ return -ESPIPE;
+ }
+ eth_reset_config(dev);
+
+ switch (number) {
+ case DEV_CONFIG_VALUE:
+ result = set_ether_config(dev, gfp_flags);
+ break;
+ default:
+ result = -EINVAL;
+ /* FALL THROUGH */
+ case 0:
+ break;
+ }
+
+ if (result) {
+ if (number)
+ eth_reset_config(dev);
+ usb_gadget_vbus_draw(dev->gadget,
+ gadget_is_otg(dev->gadget) ? 8 : 100);
+ } else {
+ char *speed;
+ unsigned power;
+
+ power = 2 * eth_config.bMaxPower;
+ usb_gadget_vbus_draw(dev->gadget, power);
+
+ switch (gadget->speed) {
+ case USB_SPEED_FULL:
+ speed = "full"; break;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_SPEED_HIGH:
+ speed = "high"; break;
+#endif
+ default:
+ speed = "?"; break;
+ }
+
+ dev->config = number;
+ printf("%s speed config #%d: %d mA, %s, using %s\n",
+ speed, number, power, driver_desc,
+ (cdc_active(dev) ? "CDC Ethernet"
+ : "CDC Ethernet Subset"));
+ }
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEV_CONFIG_CDC
+
+/*
+ * The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
+ * only to notify the host about link status changes (which we support) or
+ * report completion of some encapsulated command. Since
+ * we want this CDC Ethernet code to be vendor-neutral, we don't use that
+ * command mechanism; and only one status request is ever queued.
+ */
+static void eth_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct usb_cdc_notification *event = req->buf;
+ int value = req->status;
+ struct eth_dev *dev = ep->driver_data;
+
+ /* issue the second notification if host reads the first */
+ if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION
+ && value == 0) {
+ __le32 *data = req->buf + sizeof *event;
+
+ event->bmRequestType = 0xA1;
+ event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+ event->wValue = __constant_cpu_to_le16(0);
+ event->wIndex = __constant_cpu_to_le16(1);
+ event->wLength = __constant_cpu_to_le16(8);
+
+ /* SPEED_CHANGE data is up/down speeds in bits/sec */
+ data[0] = data[1] = cpu_to_le32(BITRATE(dev->gadget));
+
+ req->length = STATUS_BYTECOUNT;
+ value = usb_ep_queue(ep, req, GFP_ATOMIC);
+ debug("send SPEED_CHANGE --> %d\n", value);
+ if (value == 0)
+ return;
+ } else if (value != -ECONNRESET) {
+ debug("event %02x --> %d\n",
+ event->bNotificationType, value);
+ if (event->bNotificationType ==
+ USB_CDC_NOTIFY_SPEED_CHANGE) {
+ l_ethdev.network_started = 1;
+ printf("USB network up!\n");
+ }
+ }
+ req->context = NULL;
+}
+
+static void issue_start_status(struct eth_dev *dev)
+{
+ struct usb_request *req = dev->stat_req;
+ struct usb_cdc_notification *event;
+ int value;
+
+ /*
+ * flush old status
+ *
+ * FIXME ugly idiom, maybe we'd be better with just
+ * a "cancel the whole queue" primitive since any
+ * unlink-one primitive has way too many error modes.
+ * here, we "know" toggle is already clear...
+ *
+ * FIXME iff req->context != null just dequeue it
+ */
+ usb_ep_disable(dev->status_ep);
+ usb_ep_enable(dev->status_ep, dev->status);
+
+ /*
+ * 3.8.1 says to issue first NETWORK_CONNECTION, then
+ * a SPEED_CHANGE. could be useful in some configs.
+ */
+ event = req->buf;
+ event->bmRequestType = 0xA1;
+ event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+ event->wValue = __constant_cpu_to_le16(1); /* connected */
+ event->wIndex = __constant_cpu_to_le16(1);
+ event->wLength = 0;
+
+ req->length = sizeof *event;
+ req->complete = eth_status_complete;
+ req->context = dev;
+
+ value = usb_ep_queue(dev->status_ep, req, GFP_ATOMIC);
+ if (value < 0)
+ debug("status buf queue --> %d\n", value);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static void eth_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ debug("setup complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's not
+ * handled lower down. CDC has a number of less-common features:
+ *
+ * - two interfaces: control, and ethernet data
+ * - Ethernet data interface has two altsettings: default, and active
+ * - class-specific descriptors for the control interface
+ * - class-specific control requests
+ */
+static int
+eth_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+ struct eth_dev *dev = get_gadget_data(gadget);
+ struct usb_request *req = dev->req;
+ int value = -EOPNOTSUPP;
+ u16 wIndex = le16_to_cpu(ctrl->wIndex);
+ u16 wValue = le16_to_cpu(ctrl->wValue);
+ u16 wLength = le16_to_cpu(ctrl->wLength);
+
+ /*
+ * descriptors just go into the pre-allocated ep0 buffer,
+ * while config change events may enable network traffic.
+ */
+
+ debug("%s\n", __func__);
+
+ req->complete = eth_setup_complete;
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ break;
+ switch (wValue >> 8) {
+
+ case USB_DT_DEVICE:
+ value = min(wLength, (u16) sizeof device_desc);
+ memcpy(req->buf, &device_desc, value);
+ break;
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!gadget_is_dualspeed(gadget))
+ break;
+ value = min(wLength, (u16) sizeof dev_qualifier);
+ memcpy(req->buf, &dev_qualifier, value);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (!gadget_is_dualspeed(gadget))
+ break;
+ /* FALLTHROUGH */
+ case USB_DT_CONFIG:
+ value = config_buf(gadget, req->buf,
+ wValue >> 8,
+ wValue & 0xff,
+ gadget_is_otg(gadget));
+ if (value >= 0)
+ value = min(wLength, (u16) value);
+ break;
+
+ case USB_DT_STRING:
+ value = usb_gadget_get_string(&stringtab,
+ wValue & 0xff, req->buf);
+
+ if (value >= 0)
+ value = min(wLength, (u16) value);
+
+ break;
+ }
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ break;
+ if (gadget->a_hnp_support)
+ debug("HNP available\n");
+ else if (gadget->a_alt_hnp_support)
+ debug("HNP needs a different root port\n");
+ value = eth_set_config(dev, wValue, GFP_ATOMIC);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ break;
+ *(u8 *)req->buf = dev->config;
+ value = min(wLength, (u16) 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE
+ || !dev->config
+ || wIndex > 1)
+ break;
+ if (!cdc_active(dev) && wIndex != 0)
+ break;
+
+ /*
+ * PXA hardware partially handles SET_INTERFACE;
+ * we need to kluge around that interference.
+ */
+ if (gadget_is_pxa(gadget)) {
+ value = eth_set_config(dev, DEV_CONFIG_VALUE,
+ GFP_ATOMIC);
+ goto done_set_intf;
+ }
+
+#ifdef DEV_CONFIG_CDC
+ switch (wIndex) {
+ case 0: /* control/master intf */
+ if (wValue != 0)
+ break;
+ if (dev->status) {
+ usb_ep_disable(dev->status_ep);
+ usb_ep_enable(dev->status_ep, dev->status);
+ }
+ value = 0;
+ break;
+ case 1: /* data intf */
+ if (wValue > 1)
+ break;
+ usb_ep_disable(dev->in_ep);
+ usb_ep_disable(dev->out_ep);
+
+ /*
+ * CDC requires the data transfers not be done from
+ * the default interface setting ... also, setting
+ * the non-default interface resets filters etc.
+ */
+ if (wValue == 1) {
+ if (!cdc_active(dev))
+ break;
+ usb_ep_enable(dev->in_ep, dev->in);
+ usb_ep_enable(dev->out_ep, dev->out);
+ dev->cdc_filter = DEFAULT_FILTER;
+ if (dev->status)
+ issue_start_status(dev);
+ }
+
+ value = 0;
+ break;
+ }
+#else
+ /*
+ * FIXME this is wrong, as is the assumption that
+ * all non-PXA hardware talks real CDC ...
+ */
+ debug("set_interface ignored!\n");
+#endif /* DEV_CONFIG_CDC */
+
+done_set_intf:
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
+ || !dev->config
+ || wIndex > 1)
+ break;
+ if (!(cdc_active(dev)) && wIndex != 0)
+ break;
+
+ /* for CDC, iff carrier is on, data interface is active. */
+ if (wIndex != 1)
+ *(u8 *)req->buf = 0;
+ else {
+ /* *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0; */
+ /* carrier always ok ...*/
+ *(u8 *)req->buf = 1 ;
+ }
+ value = min(wLength, (u16) 1);
+ break;
+
+#ifdef DEV_CONFIG_CDC
+ case USB_CDC_SET_ETHERNET_PACKET_FILTER:
+ /*
+ * see 6.2.30: no data, wIndex = interface,
+ * wValue = packet filter bitmap
+ */
+ if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
+ || !cdc_active(dev)
+ || wLength != 0
+ || wIndex > 1)
+ break;
+ debug("packet filter %02x\n", wValue);
+ dev->cdc_filter = wValue;
+ value = 0;
+ break;
+
+ /*
+ * and potentially:
+ * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+ * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_STATISTIC:
+ */
+
+#endif /* DEV_CONFIG_CDC */
+
+ default:
+ debug("unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ wValue, wIndex, wLength);
+ }
+
+ /* respond with data transfer before status phase? */
+ if (value >= 0) {
+ debug("respond with data transfer before status phase\n");
+ req->length = value;
+ req->zero = value < wLength
+ && (value % gadget->ep0->maxpacket) == 0;
+ value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ debug("ep_queue --> %d\n", value);
+ req->status = 0;
+ eth_setup_complete(gadget->ep0, req);
+ }
+ }
+
+ /* host either stalls (value < 0) or reports success */
+ return value;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req);
+
+static int rx_submit(struct eth_dev *dev, struct usb_request *req,
+ gfp_t gfp_flags)
+{
+ int retval = -ENOMEM;
+ size_t size;
+
+ /*
+ * Padding up to RX_EXTRA handles minor disagreements with host.
+ * Normally we use the USB "terminate on short read" convention;
+ * so allow up to (N*maxpacket), since that memory is normally
+ * already allocated. Some hardware doesn't deal well with short
+ * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
+ * byte off the end (to force hardware errors on overflow).
+ */
+
+ debug("%s\n", __func__);
+
+ size = (ETHER_HDR_SIZE + dev->mtu + RX_EXTRA);
+ size += dev->out_ep->maxpacket - 1;
+ size -= size % dev->out_ep->maxpacket;
+
+ /*
+ * Some platforms perform better when IP packets are aligned,
+ * but on at least one, checksumming fails otherwise.
+ */
+
+ req->buf = (u8 *) NetRxPackets[0];
+ req->length = size;
+ req->complete = rx_complete;
+
+ retval = usb_ep_queue(dev->out_ep, req, gfp_flags);
+
+ if (retval)
+ error("rx submit --> %d", retval);
+
+ return retval;
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct eth_dev *dev = ep->driver_data;
+
+ debug("%s: status %d\n", __func__, req->status);
+
+ packet_received = 1;
+
+ if (req)
+ dev->rx_req = req;
+}
+
+static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
+{
+
+ dev->tx_req = usb_ep_alloc_request(dev->in_ep, 0);
+
+ if (!dev->tx_req)
+ goto fail;
+
+ dev->rx_req = usb_ep_alloc_request(dev->out_ep, 0);
+
+ if (!dev->rx_req)
+ goto fail;
+
+ return 0;
+
+fail:
+ error("can't alloc requests");
+ return -1;
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ debug("%s: status %s\n", __func__, (req->status) ? "failed" : "ok");
+ packet_sent = 1;
+}
+
+static inline int eth_is_promisc(struct eth_dev *dev)
+{
+ /* no filters for the CDC subset; always promisc */
+ if (subset_active(dev))
+ return 1;
+ return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
+}
+
+#if 0
+static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ int length = skb->len;
+ int retval;
+ struct usb_request *req = NULL;
+ unsigned long flags;
+
+ /* apply outgoing CDC or RNDIS filters */
+ if (!eth_is_promisc (dev)) {
+ u8 *dest = skb->data;
+
+ if (is_multicast_ether_addr(dest)) {
+ u16 type;
+
+ /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
+ * SET_ETHERNET_MULTICAST_FILTERS requests
+ */
+ if (is_broadcast_ether_addr(dest))
+ type = USB_CDC_PACKET_TYPE_BROADCAST;
+ else
+ type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+ if (!(dev->cdc_filter & type)) {
+ dev_kfree_skb_any (skb);
+ return 0;
+ }
+ }
+ /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
+ }
+
+ spin_lock_irqsave(&dev->req_lock, flags);
+ /*
+ * this freelist can be empty if an interrupt triggered disconnect()
+ * and reconfigured the gadget (shutting down this queue) after the
+ * network stack decided to xmit but before we got the spinlock.
+ */
+ if (list_empty(&dev->tx_reqs)) {
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+ return 1;
+ }
+
+ req = container_of (dev->tx_reqs.next, struct usb_request, list);
+ list_del (&req->list);
+
+ /* temporarily stop TX queue when the freelist empties */
+ if (list_empty (&dev->tx_reqs))
+ netif_stop_queue (net);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+
+ /* no buffer copies needed, unless the network stack did it
+ * or the hardware can't use skb buffers.
+ * or there's not enough space for any RNDIS headers we need
+ */
+ if (rndis_active(dev)) {
+ struct sk_buff *skb_rndis;
+
+ skb_rndis = skb_realloc_headroom (skb,
+ sizeof (struct rndis_packet_msg_type));
+ if (!skb_rndis)
+ goto drop;
+
+ dev_kfree_skb_any (skb);
+ skb = skb_rndis;
+ rndis_add_hdr (skb);
+ length = skb->len;
+ }
+ req->buf = skb->data;
+ req->context = skb;
+ req->complete = tx_complete;
+
+ /* use zlp framing on tx for strict CDC-Ether conformance,
+ * though any robust network rx path ignores extra padding.
+ * and some hardware doesn't like to write zlps.
+ */
+ req->zero = 1;
+ if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
+ length++;
+
+ req->length = length;
+
+ /* throttle highspeed IRQ rate back slightly */
+ if (gadget_is_dualspeed(dev->gadget))
+ req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+ ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+ : 0;
+
+ retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ switch (retval) {
+ default:
+ DEBUG (dev, "tx queue err %d\n", retval);
+ break;
+ case 0:
+ net->trans_start = jiffies;
+ atomic_inc (&dev->tx_qlen);
+ }
+
+ if (retval) {
+drop:
+ dev->stats.tx_dropped++;
+ dev_kfree_skb_any (skb);
+ spin_lock_irqsave(&dev->req_lock, flags);
+ if (list_empty (&dev->tx_reqs))
+ netif_start_queue (net);
+ list_add (&req->list, &dev->tx_reqs);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+#endif
+
+static void eth_unbind(struct usb_gadget *gadget)
+{
+ struct eth_dev *dev = get_gadget_data(gadget);
+
+ debug("%s...\n", __func__);
+
+ /* we've already been disconnected ... no i/o is active */
+ if (dev->req) {
+ usb_ep_free_request(gadget->ep0, dev->req);
+ dev->req = NULL;
+ }
+ if (dev->stat_req) {
+ usb_ep_free_request(dev->status_ep, dev->stat_req);
+ dev->stat_req = NULL;
+ }
+
+ if (dev->tx_req) {
+ usb_ep_free_request(dev->in_ep, dev->tx_req);
+ dev->tx_req = NULL;
+ }
+
+ if (dev->rx_req) {
+ usb_ep_free_request(dev->out_ep, dev->rx_req);
+ dev->rx_req = NULL;
+ }
+
+/* unregister_netdev (dev->net);*/
+/* free_netdev(dev->net);*/
+
+ set_gadget_data(gadget, NULL);
+}
+
+static void eth_disconnect(struct usb_gadget *gadget)
+{
+ eth_reset_config(get_gadget_data(gadget));
+}
+
+static void eth_suspend(struct usb_gadget *gadget)
+{
+ /* Not used */
+}
+
+static void eth_resume(struct usb_gadget *gadget)
+{
+ /* Not used */
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int is_eth_addr_valid(char *str)
+{
+ if (strlen(str) == 17) {
+ int i;
+ char *p, *q;
+ uchar ea[6];
+
+ /* see if it looks like an ethernet address */
+
+ p = str;
+
+ for (i = 0; i < 6; i++) {
+ char term = (i == 5 ? '\0' : ':');
+
+ ea[i] = simple_strtol(p, &q, 16);
+
+ if ((q - p) != 2 || *q++ != term)
+ break;
+
+ p = q;
+ }
+
+ if (i == 6) /* it looks ok */
+ return 1;
+ }
+ return 0;
+}
+
+static u8 nibble(unsigned char c)
+{
+ if (likely(isdigit(c)))
+ return c - '0';
+ c = toupper(c);
+ if (likely(isxdigit(c)))
+ return 10 + c - 'A';
+ return 0;
+}
+
+static int get_ether_addr(const char *str, u8 *dev_addr)
+{
+ if (str) {
+ unsigned i;
+
+ for (i = 0; i < 6; i++) {
+ unsigned char num;
+
+ if ((*str == '.') || (*str == ':'))
+ str++;
+ num = nibble(*str++) << 4;
+ num |= (nibble(*str++));
+ dev_addr[i] = num;
+ }
+ if (is_valid_ether_addr(dev_addr))
+ return 0;
+ }
+ return 1;
+}
+
+static int eth_bind(struct usb_gadget *gadget)
+{
+ struct eth_dev *dev = &l_ethdev;
+ u8 cdc = 1, zlp = 1;
+ struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
+ int gcnum;
+ u8 tmp[7];
+
+ /* these flags are only ever cleared; compiler take note */
+#ifndef DEV_CONFIG_CDC
+ cdc = 0;
+#endif
+ /*
+ * Because most host side USB stacks handle CDC Ethernet, that
+ * standard protocol is _strongly_ preferred for interop purposes.
+ * (By everyone except Microsoft.)
+ */
+ if (gadget_is_pxa(gadget)) {
+ /* pxa doesn't support altsettings */
+ cdc = 0;
+ } else if (gadget_is_musbhdrc(gadget)) {
+ /* reduce tx dma overhead by avoiding special cases */
+ zlp = 0;
+ } else if (gadget_is_sh(gadget)) {
+ /* sh doesn't support multiple interfaces or configs */
+ cdc = 0;
+ } else if (gadget_is_sa1100(gadget)) {
+ /* hardware can't write zlps */
+ zlp = 0;
+ /*
+ * sa1100 CAN do CDC, without status endpoint ... we use
+ * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
+ */
+ cdc = 0;
+ }
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16(0x0300 + gcnum);
+ else {
+ /*
+ * can't assume CDC works. don't want to default to
+ * anything less functional on CDC-capable hardware,
+ * so we fail in this case.
+ */
+ error("controller '%s' not recognized",
+ gadget->name);
+ return -ENODEV;
+ }
+
+ /*
+ * CDC subset ... recognized by Linux since 2.4.10, but Windows
+ * drivers aren't widely available. (That may be improved by
+ * supporting one submode of the "SAFE" variant of MDLM.)
+ */
+ if (!cdc) {
+ device_desc.idVendor =
+ __constant_cpu_to_le16(SIMPLE_VENDOR_NUM);
+ device_desc.idProduct =
+ __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM);
+ }
+
+ /* support optional vendor/distro customization */
+#if defined(CONFIG_USB_CDC_VENDOR_ID) && defined(CONFIG_USB_CDC_PRODUCT_ID)
+ device_desc.idVendor = cpu_to_le16(CONFIG_USB_CDC_VENDOR_ID);
+ device_desc.idProduct = cpu_to_le16(CONFIG_USB_CDC_PRODUCT_ID);
+#endif
+ if (bcdDevice)
+ device_desc.bcdDevice = cpu_to_le16(bcdDevice);
+ if (iManufacturer)
+ strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
+ if (iProduct)
+ strlcpy(product_desc, iProduct, sizeof product_desc);
+ if (iSerialNumber) {
+ device_desc.iSerialNumber = STRING_SERIALNUMBER,
+ strlcpy(serial_number, iSerialNumber, sizeof serial_number);
+ }
+
+ /* all we really need is bulk IN/OUT */
+ usb_ep_autoconfig_reset(gadget);
+ in_ep = usb_ep_autoconfig(gadget, &fs_source_desc);
+ if (!in_ep) {
+autoconf_fail:
+ error("can't autoconfigure on %s\n",
+ gadget->name);
+ return -ENODEV;
+ }
+ in_ep->driver_data = in_ep; /* claim */
+
+ out_ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
+ if (!out_ep)
+ goto autoconf_fail;
+ out_ep->driver_data = out_ep; /* claim */
+
+#if defined(DEV_CONFIG_CDC)
+ /*
+ * CDC Ethernet control interface doesn't require a status endpoint.
+ * Since some hosts expect one, try to allocate one anyway.
+ */
+ if (cdc) {
+ status_ep = usb_ep_autoconfig(gadget, &fs_status_desc);
+ if (status_ep) {
+ status_ep->driver_data = status_ep; /* claim */
+ } else if (cdc) {
+ control_intf.bNumEndpoints = 0;
+ /* FIXME remove endpoint from descriptor list */
+ }
+ }
+#endif
+
+ /* one config: cdc, else minimal subset */
+ if (!cdc) {
+ eth_config.bNumInterfaces = 1;
+ eth_config.iConfiguration = STRING_SUBSET;
+
+ /*
+ * use functions to set these up, in case we're built to work
+ * with multiple controllers and must override CDC Ethernet.
+ */
+ fs_subset_descriptors();
+ hs_subset_descriptors();
+ }
+
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ usb_gadget_set_selfpowered(gadget);
+
+ if (gadget_is_dualspeed(gadget)) {
+ if (!cdc)
+ dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+
+ /* assumes ep0 uses the same value for both speeds ... */
+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+
+ /* and that all endpoints are dual-speed */
+ hs_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
+#if defined(DEV_CONFIG_CDC)
+ if (status_ep)
+ hs_status_desc.bEndpointAddress =
+ fs_status_desc.bEndpointAddress;
+#endif
+ }
+
+ if (gadget_is_otg(gadget)) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ eth_config.bMaxPower = 4;
+ }
+
+ dev->net = &l_netdev;
+ strcpy(dev->net->name, USB_NET_NAME);
+
+ dev->cdc = cdc;
+ dev->zlp = zlp;
+
+ dev->in_ep = in_ep;
+ dev->out_ep = out_ep;
+ dev->status_ep = status_ep;
+
+ /*
+ * Module params for these addresses should come from ID proms.
+ * The host side address is used with CDC, and commonly
+ * ends up in a persistent config database. It's not clear if
+ * host side code for the SAFE thing cares -- its original BLAN
+ * thing didn't, Sharp never assigned those addresses on Zaurii.
+ */
+ get_ether_addr(dev_addr, dev->net->enetaddr);
+
+ memset(tmp, 0, sizeof(tmp));
+ memcpy(tmp, dev->net->enetaddr, sizeof(dev->net->enetaddr));
+
+ get_ether_addr(host_addr, dev->host_mac);
+
+ sprintf(ethaddr, "%02X%02X%02X%02X%02X%02X",
+ dev->host_mac[0], dev->host_mac[1],
+ dev->host_mac[2], dev->host_mac[3],
+ dev->host_mac[4], dev->host_mac[5]);
+
+ printf("using %s, OUT %s IN %s%s%s\n", gadget->name,
+ out_ep->name, in_ep->name,
+ status_ep ? " STATUS " : "",
+ status_ep ? status_ep->name : ""
+ );
+ printf("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev->net->enetaddr[0], dev->net->enetaddr[1],
+ dev->net->enetaddr[2], dev->net->enetaddr[3],
+ dev->net->enetaddr[4], dev->net->enetaddr[5]);
+
+ if (cdc) {
+ printf("HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev->host_mac[0], dev->host_mac[1],
+ dev->host_mac[2], dev->host_mac[3],
+ dev->host_mac[4], dev->host_mac[5]);
+ }
+
+ /*
+ * use PKTSIZE (or aligned... from u-boot) and set
+ * wMaxSegmentSize accordingly
+ */
+ dev->mtu = PKTSIZE_ALIGN; /* RNDIS does not like this, only 1514, TODO*/
+
+ /* preallocate control message data and buffer */
+ dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+ if (!dev->req)
+ goto fail;
+ dev->req->buf = control_req;
+ dev->req->complete = eth_setup_complete;
+
+ /* ... and maybe likewise for status transfer */
+#if defined(DEV_CONFIG_CDC)
+ if (dev->status_ep) {
+ dev->stat_req = usb_ep_alloc_request(dev->status_ep,
+ GFP_KERNEL);
+ if (!dev->stat_req) {
+ usb_ep_free_request(dev->status_ep, dev->req);
+
+ goto fail;
+ }
+ dev->stat_req->buf = status_req;
+ dev->stat_req->context = NULL;
+ }
+#endif
+
+ /* finish hookup to lower layer ... */
+ dev->gadget = gadget;
+ set_gadget_data(gadget, dev);
+ gadget->ep0->driver_data = dev;
+
+ /*
+ * two kinds of host-initiated state changes:
+ * - iff DATA transfer is active, carrier is "on"
+ * - tx queueing enabled if open *and* carrier is "on"
+ */
+ return 0;
+
+fail:
+ error("%s failed", __func__);
+ eth_unbind(gadget);
+ return -ENOMEM;
+}
+
+static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
+{
+ struct eth_dev *dev = &l_ethdev;
+ struct usb_gadget *gadget;
+ unsigned long ts;
+ unsigned long timeout = USB_CONNECT_TIMEOUT;
+
+ if (!netdev) {
+ error("received NULL ptr");
+ goto fail;
+ }
+
+ dev->network_started = 0;
+ dev->tx_req = NULL;
+ dev->rx_req = NULL;
+
+ packet_received = 0;
+ packet_sent = 0;
+
+ gadget = dev->gadget;
+ usb_gadget_connect(gadget);
+
+ if (getenv("cdc_connect_timeout"))
+ timeout = simple_strtoul(getenv("cdc_connect_timeout"),
+ NULL, 10) * CONFIG_SYS_HZ;
+ ts = get_timer(0);
+ while (!l_ethdev.network_started) {
+ /* Handle control-c and timeouts */
+ if (ctrlc() || (get_timer(ts) > timeout)) {
+ error("The remote end did not respond in time.");
+ goto fail;
+ }
+ usb_gadget_handle_interrupts();
+ }
+
+ rx_submit(dev, dev->rx_req, 0);
+ return 0;
+fail:
+ return -1;
+}
+
+static int usb_eth_send(struct eth_device *netdev,
+ volatile void *packet, int length)
+{
+ int retval;
+ struct usb_request *req = NULL;
+ struct eth_dev *dev = &l_ethdev;
+ unsigned long ts;
+ unsigned long timeout = USB_CONNECT_TIMEOUT;
+
+ debug("%s:...\n", __func__);
+
+ req = dev->tx_req;
+
+ req->buf = (void *)packet;
+ req->context = NULL;
+ req->complete = tx_complete;
+
+ /*
+ * use zlp framing on tx for strict CDC-Ether conformance,
+ * though any robust network rx path ignores extra padding.
+ * and some hardware doesn't like to write zlps.
+ */
+ req->zero = 1;
+ if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
+ length++;
+
+ req->length = length;
+#if 0
+ /* throttle highspeed IRQ rate back slightly */
+ if (gadget_is_dualspeed(dev->gadget))
+ req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+ ? ((dev->tx_qlen % qmult) != 0) : 0;
+#endif
+ dev->tx_qlen = 1;
+ ts = get_timer(0);
+ packet_sent = 0;
+
+ retval = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
+
+ if (!retval)
+ debug("%s: packet queued\n", __func__);
+ while (!packet_sent) {
+ if (get_timer(ts) > timeout) {
+ printf("timeout sending packets to usb ethernet\n");
+ return -1;
+ }
+ usb_gadget_handle_interrupts();
+ }
+
+ return 0;
+}
+
+static int usb_eth_recv(struct eth_device *netdev)
+{
+ struct eth_dev *dev = &l_ethdev;
+
+ usb_gadget_handle_interrupts();
+
+ if (packet_received) {
+ debug("%s: packet received\n", __func__);
+ if (dev->rx_req) {
+ NetReceive(NetRxPackets[0], dev->rx_req->length);
+ packet_received = 0;
+
+ if (dev->rx_req)
+ rx_submit(dev, dev->rx_req, 0);
+ } else
+ error("dev->rx_req invalid");
+ }
+ return 0;
+}
+
+void usb_eth_halt(struct eth_device *netdev)
+{
+ struct eth_dev *dev = &l_ethdev;
+
+ if (!netdev) {
+ error("received NULL ptr");
+ return;
+ }
+
+ usb_gadget_disconnect(dev->gadget);
+}
+
+static struct usb_gadget_driver eth_driver = {
+ .speed = DEVSPEED,
+
+ .bind = eth_bind,
+ .unbind = eth_unbind,
+
+ .setup = eth_setup,
+ .disconnect = eth_disconnect,
+
+ .suspend = eth_suspend,
+ .resume = eth_resume,
+};
+
+int usb_eth_initialize(bd_t *bi)
+{
+ int status = 0;
+ struct eth_device *netdev = &l_netdev;
+
+ sprintf(netdev->name, "usb_ether");
+
+ netdev->init = usb_eth_init;
+ netdev->send = usb_eth_send;
+ netdev->recv = usb_eth_recv;
+ netdev->halt = usb_eth_halt;
+
+#ifdef CONFIG_MCAST_TFTP
+ #error not supported
+#endif
+ /* Configure default mac-addresses for the USB ethernet device */
+#ifdef CONFIG_USBNET_DEV_ADDR
+ strncpy(dev_addr, CONFIG_USBNET_DEV_ADDR, sizeof(dev_addr));
+#endif
+#ifdef CONFIG_USBNET_HOST_ADDR
+ strncpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
+#endif
+ /* Check if the user overruled the MAC addresses */
+ if (getenv("usbnet_devaddr"))
+ strncpy(dev_addr, getenv("usbnet_devaddr"),
+ sizeof(dev_addr));
+
+ if (getenv("usbnet_hostaddr"))
+ strncpy(host_addr, getenv("usbnet_hostaddr"),
+ sizeof(host_addr));
+
+ /* Make sure both strings are terminated */
+ dev_addr[sizeof(dev_addr)-1] = '\0';
+ host_addr[sizeof(host_addr)-1] = '\0';
+
+ if (!is_eth_addr_valid(dev_addr)) {
+ error("Need valid 'usbnet_devaddr' to be set");
+ status = -1;
+ }
+ if (!is_eth_addr_valid(host_addr)) {
+ error("Need valid 'usbnet_hostaddr' to be set");
+ status = -1;
+ }
+ if (status)
+ goto fail;
+
+ status = usb_gadget_register_driver(&eth_driver);
+ if (status < 0)
+ goto fail;
+
+ eth_register(netdev);
+ return 0;
+
+fail:
+ error("%s failed. error = %d", __func__, status);
+ return status;
+}
+