diff options
Diffstat (limited to 'u-boot/arch/blackfin/include/asm/mach-bf527/anomaly.h')
-rw-r--r-- | u-boot/arch/blackfin/include/asm/mach-bf527/anomaly.h | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/u-boot/arch/blackfin/include/asm/mach-bf527/anomaly.h b/u-boot/arch/blackfin/include/asm/mach-bf527/anomaly.h new file mode 100644 index 0000000..72a6369 --- /dev/null +++ b/u-boot/arch/blackfin/include/asm/mach-bf527/anomaly.h @@ -0,0 +1,280 @@ +/* + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE + * + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + */ + +/* This file should be up to date with: + * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision H, 04/29/2010; ADSP-BF527 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support old silicon - sorry */ +#if __SILICON_REVISION__ < 0 +# error will not work on BF526/BF527 silicon version +#endif + +#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) +# define ANOMALY_BF526 1 +#else +# define ANOMALY_BF526 0 +#endif +#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__) +# define ANOMALY_BF527 1 +#else +# define ANOMALY_BF527 0 +#endif + +#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526) +#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527) +#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527)) + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ +#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (_ANOMALY_BF527(< 2)) +/* Host DMA Boot Modes Are Not Functional */ +#define ANOMALY_05000330 (__SILICON_REVISION__ < 2) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (_ANOMALY_BF527(< 2)) +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (_ANOMALY_BF527(< 2)) +/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ +#define ANOMALY_05000342 (_ANOMALY_BF527(< 2)) +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* USB Calibration Value to use */ +#define ANOMALY_05000346_value 0xE510 +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (_ANOMALY_BF527(< 2)) +/* Security Features Are Not Functional */ +#define ANOMALY_05000348 (_ANOMALY_BF527(< 1)) +/* bfrom_SysControl() Firmware Function Performs Improper System Reset */ +#define ANOMALY_05000353 (_ANOMALY_BF526(< 1)) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (_ANOMALY_BF527(< 2)) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (_ANOMALY_BF527(< 2)) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000364 (_ANOMALY_BF527(== 1)) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Incorrect Default CSEL Value in PLL_DIV */ +#define ANOMALY_05000368 (_ANOMALY_BF527(< 2)) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (_ANOMALY_BF527(< 2)) +/* Authentication Fails To Initiate */ +#define ANOMALY_05000376 (_ANOMALY_BF527(< 2)) +/* Data Read From L3 Memory by USB DMA May be Corrupted */ +#define ANOMALY_05000380 (_ANOMALY_BF527(< 2)) +/* 8-Bit NAND Flash Boot Mode Not Functional */ +#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Boot from OTP Memory Not Functional */ +#define ANOMALY_05000385 (_ANOMALY_BF527(< 2)) +/* bfrom_SysControl() Firmware Routine Not Functional */ +#define ANOMALY_05000386 (_ANOMALY_BF527(< 2)) +/* Programmable Preboot Settings Not Functional */ +#define ANOMALY_05000387 (_ANOMALY_BF527(< 2)) +/* CRC32 Checksum Support Not Functional */ +#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (_ANOMALY_BF527(< 2)) +/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (_ANOMALY_BF527(< 2)) +/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (_ANOMALY_BF527(< 2)) +/* Log Buffer Not Functional */ +#define ANOMALY_05000394 (_ANOMALY_BF527(< 2)) +/* Hook Routine Not Functional */ +#define ANOMALY_05000395 (_ANOMALY_BF527(< 2)) +/* Header Indirect Bit Not Functional */ +#define ANOMALY_05000396 (_ANOMALY_BF527(< 2)) +/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ +#define ANOMALY_05000397 (_ANOMALY_BF527(< 2)) +/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */ +#define ANOMALY_05000398 (_ANOMALY_BF527(< 2)) +/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */ +#define ANOMALY_05000399 (_ANOMALY_BF527(< 2)) +/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ +#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Lockbox SESR Disallows Certain User Interrupts */ +#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Lockbox SESR Firmware Does Not Save/Restore Full Context */ +#define ANOMALY_05000405 (1) +/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */ +#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */ +#define ANOMALY_05000408 (1) +/* Lockbox firmware leaves MDMA0 channel enabled */ +#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Incorrect Default Internal Voltage Regulator Setting */ +#define ANOMALY_05000410 (_ANOMALY_BF527(< 2)) +/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */ +#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */ +#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* DEB2_URGENT Bit Not Functional */ +#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */ +#define ANOMALY_05000417 (_ANOMALY_BF527(< 2)) +/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */ +#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */ +#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */ +#define ANOMALY_05000421 (1) +/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */ +#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1)) +/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */ +#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Internal Voltage Regulator Not Trimmed */ +#define ANOMALY_05000424 (_ANOMALY_BF527(< 2)) +/* Multichannel SPORT Channel Misalignment Under Specific Configuration */ +#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */ +#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Software System Reset Corrupts PLL_LOCKCNT Register */ +#define ANOMALY_05000430 (_ANOMALY_BF527(> 1)) +/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ +#define ANOMALY_05000431 (1) +/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */ +#define ANOMALY_05000432 (_ANOMALY_BF526(< 1)) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) +/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ +#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* Preboot Cannot be Used to Alter the PLL_DIV Register */ +#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ +#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (_ANOMALY_BF527(< 1)) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) +/* The WURESET Bit in the SYSCR Register is not Functional */ +#define ANOMALY_05000445 (1) +/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000450 (1) +/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ +#define ANOMALY_05000451 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ +#define ANOMALY_05000456 (1) +/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ +#define ANOMALY_05000457 (1) +/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */ +#define ANOMALY_05000460 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ +#define ANOMALY_05000466 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0)) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ +#define ANOMALY_05000483 (1) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +/* The CODEC Zero-Cross Detect Feature is not Functional */ +#define ANOMALY_05000487 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) +#define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) +#define ANOMALY_05000242 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) +#define ANOMALY_05000285 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) +#define ANOMALY_05000305 (0) +#define ANOMALY_05000307 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000362 (1) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000400 (0) +#define ANOMALY_05000402 (0) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) +#define ANOMALY_05000474 (0) + +#endif |