diff options
Diffstat (limited to 'u-boot/board/amcc/kilauea')
| -rw-r--r-- | u-boot/board/amcc/kilauea/Makefile | 51 | ||||
| -rw-r--r-- | u-boot/board/amcc/kilauea/chip_config.c | 89 | ||||
| -rw-r--r-- | u-boot/board/amcc/kilauea/config.mk | 33 | ||||
| -rw-r--r-- | u-boot/board/amcc/kilauea/kilauea.c | 324 | ||||
| -rw-r--r-- | u-boot/board/amcc/kilauea/u-boot-nand.lds | 103 |
5 files changed, 600 insertions, 0 deletions
diff --git a/u-boot/board/amcc/kilauea/Makefile b/u-boot/board/amcc/kilauea/Makefile new file mode 100644 index 0000000..726c3ce --- /dev/null +++ b/u-boot/board/amcc/kilauea/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/board/amcc/kilauea/chip_config.c b/u-boot/board/amcc/kilauea/chip_config.c new file mode 100644 index 0000000..919ec7f --- /dev/null +++ b/u-boot/board/amcc/kilauea/chip_config.c @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/ppc4xx_config.h> + +/* NAND booting versions differ in bytes: 6, 8, 9, 11, 12 */ + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "333-nor","NOR CPU: 333 PLB: 166 OPB: 83 EBC: 83", + { + 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-133-nor", "NOR CPU: 400 PLB: 133 OPB: 66 EBC: 66", + { + 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-nor", "NOR CPU: 400 PLB: 200 OPB: 100 EBC: 100", + { + 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "533-nor", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", + { + 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "533-nand", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", + { + 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0f, 0x00, + 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "600-nand", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0f, 0x00, + 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "666-nor", "NOR CPU: 666 PLB: 222 OPB: 111 EBC: 111", + { + 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/u-boot/board/amcc/kilauea/config.mk b/u-boot/board/amcc/kilauea/config.mk new file mode 100644 index 0000000..4ae3ea9 --- /dev/null +++ b/u-boot/board/amcc/kilauea/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2007-2010 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifdef CONFIG_SYS_LDSCRIPT +# need to strip off double quotes +LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) +else ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/u-boot/board/amcc/kilauea/kilauea.c b/u-boot/board/amcc/kilauea/kilauea.c new file mode 100644 index 0000000..bd6550c --- /dev/null +++ b/u-boot/board/amcc/kilauea/kilauea.c @@ -0,0 +1,324 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/ppc4xx.h> +#include <asm/ppc405.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/errno.h> + +#if defined(CONFIG_PCI) +#include <pci.h> +#include <asm/4xx_pcie.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +static int board_cpld_version(void) +{ + u32 cpld; + + cpld = in_be32((void *)CONFIG_SYS_FPGA_FIFO_BASE); + if ((cpld & CONFIG_SYS_FPGA_MAGIC_MASK) != CONFIG_SYS_FPGA_MAGIC) { + /* + * Magic not found -> "old" CPLD revision which needs + * the "old" EBC configuration + */ + mtebc(PB2AP, EBC_BXAP_BME_ENABLED | EBC_BXAP_FWT_ENCODE(5) | + EBC_BXAP_BWT_ENCODE(0) | EBC_BXAP_BCE_DISABLE | + EBC_BXAP_BCT_2TRANS | EBC_BXAP_CSN_ENCODE(0) | + EBC_BXAP_OEN_ENCODE(0) | EBC_BXAP_WBN_ENCODE(3) | + EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_TH_ENCODE(4) | + EBC_BXAP_RE_DISABLED | EBC_BXAP_SOR_DELAYED | + EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); + + /* + * Return 0 for "old" CPLD version + */ + return 0; + } + + /* + * Magic found -> "new" CPLD revision which needs no new + * EBC configuration + */ + return (cpld & CONFIG_SYS_FPGA_VER_MASK) >> 8; +} + +/* + * Board early initialization function + */ +int board_early_init_f (void) +{ + u32 val; + + /*--------------------------------------------------------------------+ + | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board. + +--------------------------------------------------------------------+ + +---------------------------------------------------------------------+ + |Interrupt| Source | Pol. | Sensi.| Crit. | + +---------+-----------------------------------+-------+-------+-------+ + | IRQ 00 | UART0 | High | Level | Non | + | IRQ 01 | UART1 | High | Level | Non | + | IRQ 02 | IIC0 | High | Level | Non | + | IRQ 03 | TBD | High | Level | Non | + | IRQ 04 | TBD | High | Level | Non | + | IRQ 05 | EBM | High | Level | Non | + | IRQ 06 | BGI | High | Level | Non | + | IRQ 07 | IIC1 | Rising| Edge | Non | + | IRQ 08 | SPI | High | Lvl/ed| Non | + | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non | + | IRQ 10 | MAL TX EOB | High | Level | Non | + | IRQ 11 | MAL RX EOB | High | Level | Non | + | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non | + | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non | + | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non | + | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non | + | IRQ 16 | PCIE0 AL | high | Level | Non | + | IRQ 17 | PCIE0 VPD access | rising| Edge | Non | + | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non | + | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non | + | IRQ 20 | PCIE0 TCR | High | Level | Non | + | IRQ 21 | PCIE0 MSI level0 | High | Level | Non | + | IRQ 22 | PCIE0 MSI level1 | High | Level | Non | + | IRQ 23 | Security EIP-94 | High | Level | Non | + | IRQ 24 | EMAC0 interrupt | High | Level | Non | + | IRQ 25 | EMAC1 interrupt | High | Level | Non | + | IRQ 26 | PCIE0 MSI level2 | High | Level | Non | + | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non | + | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non | + | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. | + | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non | + | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. | + |---------------------------------------------------------------------- + | IRQ 32 | MAL Serr | High | Level | Non | + | IRQ 33 | MAL Txde | High | Level | Non | + | IRQ 34 | MAL Rxde | High | Level | Non | + | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non | + | IRQ 36 | PCIE0 DCR Error | High | Level | Non | + | IRQ 37 | EBC | High |Lvl Edg| Non | + | IRQ 38 | NDFC | High | Level | Non | + | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non | + | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non | + | IRQ 41 | PCIE1 AL | high | Level | Non | + | IRQ 42 | PCIE1 VPD access | rising| edge | Non | + | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non | + | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non | + | IRQ 45 | PCIE1 TCR | High | Level | Non | + | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non | + | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | + | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | + | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non | + | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non | + | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | + | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non | + | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non | + | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non | + | IRQ 55 | Serial ROM | High | Level | Non | + | IRQ 56 | GPT Decrement Pulse | High | Level | Non | + | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non | + | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non | + | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non | + | IRQ 60 | EMAC0 Wake-up | High | Level | Non | + | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non | + | IRQ 62 | EMAC1 Wake-up | High | Level | Non | + |---------------------------------------------------------------------- + | IRQ 64 | PE0 AL | High | Level | Non | + | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | + | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | + | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | + | IRQ 68 | PE0 TCR | High | Level | Non | + | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | + | IRQ 70 | PE0 DCR Error | High | Level | Non | + | IRQ 71 | Reserved | N/A | N/A | Non | + | IRQ 72 | PE1 AL | High | Level | Non | + | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | + | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | + | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | + | IRQ 76 | PE1 TCR | High | Level | Non | + | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | + | IRQ 78 | PE1 DCR Error | High | Level | Non | + | IRQ 79 | Reserved | N/A | N/A | Non | + | IRQ 80 | PE2 AL | High | Level | Non | + | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | + | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | + | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | + | IRQ 84 | PE2 TCR | High | Level | Non | + | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | + | IRQ 86 | PE2 DCR Error | High | Level | Non | + | IRQ 87 | Reserved | N/A | N/A | Non | + | IRQ 88 | External IRQ(5) | Progr | Progr | Non | + | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | + | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | + | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | + | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | + | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | + | IRQ 94 | Reserved | N/A | N/A | Non | + | IRQ 95 | Reserved | N/A | N/A | Non | + |--------------------------------------------------------------------- + +---------+-----------------------------------+-------+-------+------*/ + /*--------------------------------------------------------------------+ + | Initialise UIC registers. Clear all interrupts. Disable all + | interrupts. + | Set critical interrupt values. Set interrupt polarities. Set + | interrupt trigger levels. Make bit 0 High priority. Clear all + | interrupts again. + +-------------------------------------------------------------------*/ + + mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */ + mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */ + mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ + + mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */ + mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */ + mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ + + mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */ + /* Except cascade UIC0 and UIC1 */ + mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */ + mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */ + mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ + + /* + * Note: Some cores are still in reset when the chip starts, so + * take them out of reset + */ + mtsdr(SDR0_SRST, 0); + + /* Configure 405EX for NAND usage */ + val = SDR0_CUST0_MUX_NDFC_SEL | + SDR0_CUST0_NDFC_ENABLE | + SDR0_CUST0_NDFC_BW_8_BIT | + SDR0_CUST0_NRB_BUSY | + (0x80000000 >> (28 + CONFIG_SYS_NAND_CS)); + mtsdr(SDR0_CUST0, val); + + /* + * Configure PFC (Pin Function Control) registers + * -> Enable USB + */ + val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ; + mtsdr(SDR0_PFC1, val); + + /* + * The CPLD version detection has to be the first access to + * the CPLD, so we need to make this access this early and + * save the CPLD version for later. + */ + gd->board_type = board_cpld_version(); + + /* + * Configure FPGA register with PCIe reset + */ + out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4); /* assert PCIe reset */ + mdelay(50); + out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7); /* deassert PCIe reset */ + + return 0; +} + +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_IS_IN_FLASH + /* Monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + -CONFIG_SYS_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); +#endif + + return 0; +} + +static int is_405exr(void) +{ + u32 pvr = get_pvr(); + + if (pvr & 0x00000004) + return 0; /* bit 2 set -> 405EX */ + + return 1; /* bit 2 cleared -> 405EXr */ +} + +int board_emac_count(void) +{ + /* + * 405EXr only has one EMAC interface, 405EX has two + */ + if (is_405exr()) + return 1; + else + return 2; +} + +/* + * Override the weak default implementation and return the + * last PCIe slot number (max number - 1). + */ +int board_pcie_last(void) +{ + /* + * 405EXr only has one EMAC interface, 405EX has two + */ + if (is_405exr()) + return 1 - 1; + else + return 2 - 1; +} + +int checkboard (void) +{ + char *s = getenv("serial#"); + + if (is_405exr()) + printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board"); + else + printf("Board: Kilauea - AMCC PPC405EX Evaluation Board"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + printf(" (CPLD rev. %ld)\n", gd->board_type); + + return (0); +} diff --git a/u-boot/board/amcc/kilauea/u-boot-nand.lds b/u-boot/board/amcc/kilauea/u-boot-nand.lds new file mode 100644 index 0000000..c2a04c7 --- /dev/null +++ b/u-boot/board/amcc/kilauea/u-boot-nand.lds @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + arch/powerpc/cpu/ppc4xx/start.o (.text*) + + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/env_embedded.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + + *(.text*) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + KEEP(*(.got)) + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data*) + *(.sdata*) + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.bss*) + *(.sbss*) + *(COMMON) + . = ALIGN(4); + } + + _end = . ; + PROVIDE (end = .); +} |