1 files changed, 64 insertions, 0 deletions
diff --git a/u-boot/board/bf548-ezkit/bf548-ezkit.c b/u-boot/board/bf548-ezkit/bf548-ezkit.c
new file mode 100644
index 0000000..cb9ee86
--- /dev/null
+++ b/u-boot/board/bf548-ezkit/bf548-ezkit.c
@@ -0,0 +1,64 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+#include <asm/sdh.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	printf("Board: ADI BF548 EZ-Kit board\n");
+	printf("       Support: http://blackfin.uclinux.org/\n");
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	/* Set async addr lines as peripheral */
+	const unsigned short pins[] = {
+		P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+		P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20,
+		P_A21, P_A22, P_A23, P_A24, 0
+	};
+	return peripheral_request_list(pins, "async");
+}
+
+#ifdef CONFIG_SMC911X
+int board_eth_init(bd_t *bis)
+{
+	return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+}
+#endif
+
+#ifdef CONFIG_BFIN_SDH
+int board_mmc_init(bd_t *bis)
+{
+	return bfin_mmc_init(bis);
+}
+#endif
+
+#ifdef CONFIG_USB_BLACKFIN
+void board_musb_init(void)
+{
+	/*
+	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both device
+	 * and OTG host modes, while rev 1.1 and greater require PE7 to
+	 * be low for device mode and high for host mode.  We set it high
+	 * here because we are in host mode.
+	 */
+	gpio_request(GPIO_PE7, "musb-vbus");
+	gpio_direction_output(GPIO_PE7, 1);
+}
+#endif