diff options
Diffstat (limited to 'u-boot/board/davedenx/qong/lowlevel_init.S')
| -rw-r--r-- | u-boot/board/davedenx/qong/lowlevel_init.S | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/u-boot/board/davedenx/qong/lowlevel_init.S b/u-boot/board/davedenx/qong/lowlevel_init.S new file mode 100644 index 0000000..80bed92 --- /dev/null +++ b/u-boot/board/davedenx/qong/lowlevel_init.S @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2009, Emcraft Systems, Ilya Yanok <yanok@emcraft.com> + * + * Based on board/freescale/mx31ads/lowlevel_init.S + * by Guennadi Liakhovetski. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/mx31-regs.h> + +.macro REG reg, val + ldr r2, =\reg + ldr r3, =\val + str r3, [r2] +.endm + +.macro REG8 reg, val + ldr r2, =\reg + ldr r3, =\val + strb r3, [r2] +.endm + +.macro DELAY loops + ldr r2, =\loops +1: + subs r2, r2, #1 + nop + bcs 1b +.endm + +.macro SETUP_RAM cfg, ctl + /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ + REG 0xB8001010, 0x00000004 + ldr r3, =\cfg + ldr r2, =WEIM_ESDCFG0 + str r3, [r2] + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff + ldr r3, =\ctl + ldr r2, =WEIM_ESDCTL0 + str r3, [r2] + REG 0x80000000, 0xDEADBEEF + REG 0xB8001010, 0x0000000c + +.endm +/* RedBoot: To support 133MHz DDR */ +.macro init_drive_strength + /* + * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits + * in SW_PAD_CTL registers + */ + + /* SDCLK */ + ldr r1, =IOMUXC_SW_PAD_CTL(0x2b) + ldr r0, [r1, #0x6C] + bic r0, r0, #(1 << 12) + str r0, [r1, #0x6C] + + /* CAS */ + ldr r0, [r1, #0x70] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x70] + + /* RAS */ + ldr r0, [r1, #0x74] + bic r0, r0, #(1 << 2) + str r0, [r1, #0x74] + + /* CS2 (CSD0) */ + ldr r0, [r1, #0x7C] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x7C] + + /* DQM3 */ + ldr r0, [r1, #0x84] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x84] + + /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ + ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */ +pad_loop: + ldr r0, [r1, #0x88] + bic r0, r0, #(1 << 22) + bic r0, r0, #(1 << 12) + bic r0, r0, #(1 << 2) + str r0, [r1, #0x88] + add r1, r1, #4 + subs r2, r2, #0x1 + bne pad_loop +.endm /* init_drive_strength */ + +.globl lowlevel_init +lowlevel_init: + + init_drive_strength + + /* Image Processing Unit: */ + /* Too early to switch display on? */ + /* Switch on Display Interface */ + REG IPU_CONF, IPU_CONF_DI_EN + /* Clock Control Module: */ + REG CCM_CCMR, 0x074B0BF5 /* Use CKIH, MCU PLL off */ + + DELAY 0x40000 + + REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE /* MCU PLL on */ + /* Switch to MCU PLL */ + REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS + + /* 399-133-66.5 */ + ldr r0, =CCM_BASE + ldr r1, =0xFF871650 + /* PDR0 */ + str r1, [r0, #0x4] + ldr r1, MPCTL_PARAM_399 + /* MPCTL */ + str r1, [r0, #0x10] + + /* Set UPLL=240MHz, USB=60MHz */ + ldr r1, =0x49FCFE7F + /* PDR1 */ + str r1, [r0, #0x8] + ldr r1, UPCTL_PARAM_240 + /* UPCTL */ + str r1, [r0, #0x14] + /* default CLKO to 1/8 of the ARM core */ + mov r1, #0x00000208 + /* COSR */ + str r1, [r0, #0x1c] + + /* Default: 1, 4, 12, 1 */ + REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) + +check_ddr_module: +/* Set stackpointer in internal RAM to call get_ram_size */ + ldr sp, =(IRAM_BASE_ADDR + IRAM_SIZE - 16) + stmfd sp!, {r0-r11, ip, lr} + mov ip, lr /* save link reg across call */ + + ldr r0,=0x08000000 + SETUP_RAM ESDCFG0_256MB, ESDCTL0_256MB + ldr r0,=0x80000000 + ldr r1,=0x10000000 + bl get_ram_size + ldr r1,=0x10000000 + cmp r0,r1 + beq restore_regs + SETUP_RAM ESDCFG0_128MB, ESDCTL0_128MB + ldr r0,=0x80000000 + ldr r1,=0x08000000 + bl get_ram_size + ldr r1,=0x08000000 + cmp r0,r1 + beq restore_regs + +restore_regs: + ldmfd sp!, {r0-r11, ip, lr} + mov lr, ip /* restore link reg */ + + mov pc, lr + + +MPCTL_PARAM_399: + .word (((1 - 1) << 26) + ((52 - 1) << 16) + (7 << 10) + (35 << 0)) +UPCTL_PARAM_240: + .word (((2 - 1) << 26) + ((13 - 1) << 16) + (9 << 10) + (3 << 0)) + + .equ ESDCFG0_128MB, \ + (0 << 21) + /* tXP */ \ + (1 << 20) + /* tWTR */ \ + (2 << 18) + /* tRP */ \ + (1 << 16) + /* tMRD */ \ + (0 << 15) + /* tWR */ \ + (5 << 12) + /* tRAS */ \ + (1 << 10) + /* tRRD */ \ + (3 << 8) + /* tCAS */ \ + (2 << 4) + /* tRCD */ \ + (0x0F << 0) /* tRC */ + + .equ ESDCTL0_128MB, \ + (1 << 31) + /* enable */ \ + (0 << 28) + /* mode */ \ + (0 << 27) + /* supervisor protect */ \ + (2 << 24) + /* 13 rows */ \ + (2 << 20) + /* 10 cols */ \ + (2 << 16) + /* 32 bit */ \ + (3 << 13) + /* 7.81us (64ms/8192) */ \ + (0 << 10) + /* power down timer */ \ + (0 << 8) + /* full page */ \ + (1 << 7) + /* burst length */ \ + (0 << 0) /* precharge timer */ + + .equ ESDCFG0_256MB, \ + (3 << 21) + /* tXP */ \ + (0 << 20) + /* tWTR */ \ + (2 << 18) + /* tRP */ \ + (1 << 16) + /* tMRD */ \ + (0 << 15) + /* tWR */ \ + (5 << 12) + /* tRAS */ \ + (1 << 10) + /* tRRD */ \ + (3 << 8) + /* tCAS */ \ + (2 << 4) + /* tRCD */ \ + (7 << 0) /* tRC */ + + .equ ESDCTL0_256MB, \ + (1 << 31) + \ + (0 << 28) + \ + (0 << 27) + \ + (3 << 24) + /* 14 rows */ \ + (2 << 20) + /* 10 cols */ \ + (2 << 16) + \ + (4 << 13) + /* 3.91us (64ms/16384) */ \ + (0 << 10) + \ + (0 << 8) + \ + (1 << 7) + \ + (0 << 0) |