1 files changed, 100 insertions, 0 deletions
diff --git a/u-boot/board/davinci/sonata/board_init.S b/u-boot/board/davinci/sonata/board_init.S
new file mode 100644
index 0000000..3e4c7a2
--- /dev/null
+++ b/u-boot/board/davinci/sonata/board_init.S
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Board-specific low level initialization code. Called at the very end
+ * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * initialization required.
+ *
+ * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer
+ * Sonata boards, AFAIK, don't use this so it's just return by default. Ask
+ * Visioneering if they reinvented the wheel once again to make sure :)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl	dv_board_init
+dv_board_init:
+#ifdef SONATA_BOARD_GPIOWP
+	/* Set PINMUX0 to enable GPIO4 */
+	ldr	r0, _PINMUX0
+	ldr	r1, GPIO4_EN_MASK
+	ldr	r2, [r0]
+	and	r2, r2, r1
+	str	r2, [r0]
+
+	/* Enable GPIO LPSC module */
+	ldr	r0, PTSTAT
+
+gpio_ptstat_loop1:
+	ldr	r2, [r0]
+	tst	r2, $0x00000001
+	bne	gpio_ptstat_loop1
+
+	ldr	r1, MDCTL_GPIO
+	ldr	r2, [r1]
+	and	r2, r2, $0xfffffff8
+	orr	r2, r2, $0x00000003
+	str	r2, [r1]
+
+	orr	r2, r2, $0x00000200
+	str	r2, [r1]
+
+	ldr	r1, PTCMD
+	mov	r2, $0x00000001
+	str	r2, [r1]
+
+gpio_ptstat_loop2:
+	ldr	r2, [r0]
+	tst	r2, $0x00000001
+	bne	gpio_ptstat_loop2
+
+	ldr	r0, MDSTAT_GPIO
+gpio_mdstat_loop:
+	ldr	r2, [r0]
+	and	r2, r2, $0x0000001f
+	teq	r2, $0x00000003
+	bne	gpio_mdstat_loop
+
+	/* GPIO4 -> output */
+	ldr	r0, GPIO_DIR01
+	mov	r1, $0x10
+	ldr	r2, [r0]
+	bic	r2, r2, r0
+	str	r2, [r0]
+
+	/* Set it to 0 (Write Protect) */
+	ldr	r0, GPIO_CLR_DATA01
+	str	r1, [r0]
+#endif
+
+	mov	pc, lr
+
+#ifdef SONATA_BOARD_GPIOWP
+.ltorg
+
+GPIO4_EN_MASK:
+	.word	0xf77fffff
+MDCTL_GPIO:
+	.word	0x01c41a68
+MDSTAT_GPIO:
+	.word	0x01c41868
+GPIO_DIR01:
+	.word	0x01c67010
+GPIO_CLR_DATA01:
+	.word	0x01c6701c
+#endif