diff options
Diffstat (limited to 'u-boot/board/esd/vme8349/pci.c')
| -rw-r--r-- | u-boot/board/esd/vme8349/pci.c | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/u-boot/board/esd/vme8349/pci.c b/u-boot/board/esd/vme8349/pci.c new file mode 100644 index 0000000..2802be1 --- /dev/null +++ b/u-boot/board/esd/vme8349/pci.c @@ -0,0 +1,136 @@ +/* + * pci.c -- esd VME8349 PCI board support. + * Copyright (c) 2006 Wind River Systems, Inc. + * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. + * Copyright (c) 2009 esd gmbh. + * + * Reinhard Arlt <reinhard.arlt@esd-electronics.com> + * + * Based on MPC8349 PCI support but w/o PIB related code. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <asm/mmu.h> +#include <asm/io.h> +#include <common.h> +#include <mpc83xx.h> +#include <pci.h> +#include <i2c.h> +#include <asm/fsl_i2c.h> +#include "vme8349pin.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct pci_region pci1_regions[] = { + { + bus_start: CONFIG_SYS_PCI1_MEM_BASE, + phys_start: CONFIG_SYS_PCI1_MEM_PHYS, + size: CONFIG_SYS_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CONFIG_SYS_PCI1_IO_BASE, + phys_start: CONFIG_SYS_PCI1_IO_PHYS, + size: CONFIG_SYS_PCI1_IO_SIZE, + flags: PCI_REGION_IO + }, + { + bus_start: CONFIG_SYS_PCI1_MMIO_BASE, + phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, + size: CONFIG_SYS_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, +}; + +/* + * pci_init_board() + * + * NOTICE: PCI2 is not supported. There is only one + * physical PCI slot on the board. + * + */ +void +pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci1_regions }; + u8 reg8; + int monarch = 0; + + i2c_set_bus_num(1); + /* Read the PCI_M66EN jumper setting */ + if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, ®8, 1) == 0) || + (i2c_read(0x38 , 0, 0, ®8, 1) == 0)) { + if (reg8 & 0x40) { + clk->occr = 0xff000000; /* 66 MHz PCI */ + printf("PCI: 66MHz\n"); + } else { + clk->occr = 0xffff0003; /* 33 MHz PCI */ + printf("PCI: 33MHz\n"); + } + if (((reg8 & 0x01) == 0) || ((reg8 & 0x02) == 0)) + monarch = 1; + } else { + clk->occr = 0xffff0003; /* 33 MHz PCI */ + printf("PCI: 33MHz (I2C read failed)\n"); + } + udelay(2000); + + /* + * Assert/deassert VME reset + */ + clrsetbits_be32(&immr->gpio[1].dat, + GPIO2_TSI_POWERUP_RESET_N | GPIO2_TSI_PLL_RESET_N, + GPIO2_VME_RESET_N | GPIO2_L_RESET_EN_N); + setbits_be32(&immr->gpio[1].dir, GPIO2_TSI_PLL_RESET_N | + GPIO2_TSI_POWERUP_RESET_N | + GPIO2_VME_RESET_N | + GPIO2_L_RESET_EN_N); + clrbits_be32(&immr->gpio[1].dir, GPIO2_V_SCON); + udelay(200); + setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_PLL_RESET_N); + udelay(200); + setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_POWERUP_RESET_N); + udelay(600000); + clrbits_be32(&immr->gpio[1].dat, GPIO2_L_RESET_EN_N); + + /* Configure PCI Local Access Windows */ + pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + udelay(2000); + + if (monarch == 0) { + mpc83xx_pci_init(1, reg); + } else { + /* + * Release PCI RST Output signal + */ + out_be32(&immr->pci_ctrl[0].gcr, 0); + udelay(2000); + out_be32(&immr->pci_ctrl[0].gcr, 1); + } +} |