diff options
Diffstat (limited to 'u-boot/board/freescale/mpc8540ads/mpc8540ads.c')
| -rw-r--r-- | u-boot/board/freescale/mpc8540ads/mpc8540ads.c | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/u-boot/board/freescale/mpc8540ads/mpc8540ads.c b/u-boot/board/freescale/mpc8540ads/mpc8540ads.c new file mode 100644 index 0000000..c75585e --- /dev/null +++ b/u-boot/board/freescale/mpc8540ads/mpc8540ads.c @@ -0,0 +1,256 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * (C) Copyright 2002,2003, Motorola Inc. + * Xianghua Xiao, (X.Xiao@motorola.com) + * + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_ddr_sdram.h> +#include <libfdt.h> +#include <fdt_support.h> + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +void local_bus_init(void); + +int checkboard (void) +{ + puts("Board: ADS\n"); + +#ifdef CONFIG_PCI + printf("PCI1: 32 bit, %d MHz (compiled)\n", + CONFIG_SYS_CLK_FREQ / 1000000); +#else + printf("PCI1: disabled\n"); +#endif + + /* + * Initialize local bus. + */ + local_bus_init(); + + return 0; +} + +/* + * Initialize Local Bus + */ + +void +local_bus_init(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + + uint clkdiv; + uint lbc_hz; + sys_info_t sysinfo; + + /* + * Errata LBC11. + * Fix Local Bus clock glitch when DLL is enabled. + * + * If localbus freq is < 66MHz, DLL bypass mode must be used. + * If localbus freq is > 133MHz, DLL can be safely enabled. + * Between 66 and 133, the DLL is enabled with an override workaround. + */ + + get_sys_info(&sysinfo); + clkdiv = lbc->lcrr & LCRR_CLKDIV; + lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + + if (lbc_hz < 66) { + lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ + + } else if (lbc_hz >= 133) { + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + + } else { + /* + * On REV1 boards, need to change CLKDIV before enable DLL. + * Default CLKDIV is 8, change it to 4 temporarily. + */ + uint pvr = get_pvr(); + uint temp_lbcdll = 0; + + if (pvr == PVR_85xx_REV1) { + /* FIXME: Justify the high bit here. */ + lbc->lcrr = 0x10000004; + } + + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + udelay(200); + + /* + * Sample LBC DLL ctrl reg, upshift it to set the + * override bits. + */ + temp_lbcdll = gur->lbcdllcr; + gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); + asm("sync;isync;msync"); + } +} + + +/* + * Initialize SDRAM memory on the Local Bus. + */ +void lbc_sdram_init(void) +{ + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; + + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); + + /* + * Setup SDRAM Base and Option Registers + */ + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); + lbc->lbcr = CONFIG_SYS_LBC_LBCR; + asm("msync"); + + lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; + asm("sync"); + + /* + * Configure the SDRAM controller. + */ + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; + asm("sync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; + asm("sync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; + asm("sync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; + asm("sync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; + asm("sync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +phys_size_t fixed_sdram(void) +{ + #ifndef CONFIG_SYS_RAMBOOT + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; + #if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000000D; + ddr->err_sbe = 0x00ff0000; + #endif + asm("sync;isync;msync"); + udelay(500); + #if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); + #else + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; + #endif + asm("sync; isync; msync"); + udelay(500); + #endif + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_PCI) +/* + * Initialize PCI Devices, report devices found. + */ + + +static struct pci_controller hose; + +#endif /* CONFIG_PCI */ + + +void +pci_init_board(void) +{ +#ifdef CONFIG_PCI + pci_mpc85xx_init(&hose); +#endif /* CONFIG_PCI */ +} + + +#if defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + int node, tmp[2]; + const char *path; + + ft_cpu_setup(blob, bd); + + node = fdt_path_offset(blob, "/aliases"); + tmp[0] = 0; + if (node >= 0) { +#ifdef CONFIG_PCI + path = fdt_getprop(blob, node, "pci0", NULL); + if (path) { + tmp[1] = hose.last_busno - hose.first_busno; + do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); + } +#endif + } +} +#endif |