diff options
Diffstat (limited to 'u-boot/board/freescale/mpc8569mds')
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/Makefile | 55 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/bcsr.c | 66 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/bcsr.h | 88 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/config.mk | 30 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/ddr.c | 94 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/law.c | 57 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/mpc8569mds.c | 598 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8569mds/tlb.c | 111 |
8 files changed, 1099 insertions, 0 deletions
diff --git a/u-boot/board/freescale/mpc8569mds/Makefile b/u-boot/board/freescale/mpc8569mds/Makefile new file mode 100644 index 0000000..1d49757 --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/Makefile @@ -0,0 +1,55 @@ +# +# Copyright 2004-2009 Freescale Semiconductor. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += bcsr.o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/board/freescale/mpc8569mds/bcsr.c b/u-boot/board/freescale/mpc8569mds/bcsr.c new file mode 100644 index 0000000..b688e5c --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/bcsr.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +#include "bcsr.h" + +void enable_8569mds_flash_write() +{ + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); +} + +void disable_8569mds_flash_write() +{ + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); +} + +void enable_8569mds_qe_uec() +{ +#if defined(CONFIG_SYS_UCC_RGMII_MODE) + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), + BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), + BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), + BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), + BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); +#elif defined(CONFIG_SYS_UCC_RMII_MODE) + /* Set UCC1-4 working at RMII mode */ + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), + BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), + BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), + BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), + BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), BCSR9_UCC3_RMII_EN); +#endif +} + +void disable_8569mds_brd_eeprom_write_protect() +{ + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT); +} diff --git a/u-boot/board/freescale/mpc8569mds/bcsr.h b/u-boot/board/freescale/mpc8569mds/bcsr.h new file mode 100644 index 0000000..091b69c --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/bcsr.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BCSR_H_ +#define __BCSR_H_ + +#include <common.h> + +/* BCSR Bit definitions*/ +/****************************************/ +/* BCSR defines */ +/****************************************/ +#define BCSR6_UPC1_EN 0x80 +#define BCSR6_UPC1_POS_EN 0x40 +#define BCSR6_UPC1_ADDR_EN 0x20 +#define BCSR6_UPC1_DEV2 0x10 +#define BCSR6_SD_CARD_1BIT 0x08 +#define BCSR6_SD_CARD_4BITS 0x04 +#define BCSR6_TDM2G_EN 0x02 +#define BCSR6_UCC7_RMII_EN 0x01 + +#define BCSR7_UCC1_GETH_EN 0x80 +#define BCSR7_UCC1_RGMII_EN 0x40 +#define BCSR7_UCC1_RTBI_EN 0x20 +#define BCSR7_GETHRST_MRVL 0x04 +#define BCSR7_BRD_WRT_PROTECT 0x02 + +#define BCSR8_UCC2_GETH_EN 0x80 +#define BCSR8_UCC2_RGMII_EN 0x40 +#define BCSR8_UCC2_RTBI_EN 0x20 +#define BCSR8_UEM_MARVEL_RESET 0x02 + +#define BCSR9_UCC3_GETH_EN 0x80 +#define BCSR9_UCC3_RGMII_EN 0x40 +#define BCSR9_UCC3_RTBI_EN 0x20 +#define BCSR9_UCC3_RMII_EN 0x10 +#define BCSR9_UCC3_UEM_MICREL 0x01 + +#define BCSR10_UCC4_GETH_EN 0x80 +#define BCSR10_UCC4_RGMII_EN 0x40 +#define BCSR10_UCC4_RTBI_EN 0x20 + +#define BCSR11_LED0 0x40 +#define BCSR11_LED1 0x20 +#define BCSR11_LED2 0x10 + +#define BCSR12_UCC6_RMII_EN 0x20 +#define BCSR12_UCC8_RMII_EN 0x20 + +#define BCSR15_SMII6_DIS 0x08 +#define BCSR15_SMII8_DIS 0x04 +#define BCSR15_QEUART_EN 0x01 + +#define BCSR16_UPC1_DEV2 0x02 + +#define BCSR17_nUSBEN 0x80 +#define BCSR17_nUSBLOWSPD 0x40 +#define BCSR17_USBVCC 0x20 +#define BCSR17_USBMODE 0x10 +#define BCSR17_FLASH_nWP 0x01 + +/*BCSR Utils functions*/ + +void enable_8569mds_flash_write(void); +void disable_8569mds_flash_write(void); +void enable_8569mds_qe_uec(void); +void disable_8569mds_brd_eeprom_write_protect(void); + +#endif /* __BCSR_H_ */ diff --git a/u-boot/board/freescale/mpc8569mds/config.mk b/u-boot/board/freescale/mpc8569mds/config.mk new file mode 100644 index 0000000..54b2eb1 --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/config.mk @@ -0,0 +1,30 @@ +# +# Copyright (C) 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# mpc8569mds board +# +ifndef NAND_SPL +ifeq ($(CONFIG_NAND), y) +LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds +endif +endif diff --git a/u-boot/board/freescale/mpc8569mds/ddr.c b/u-boot/board/freescale/mpc8569mds/ddr.c new file mode 100644 index 0000000..e3f5b4a --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/ddr.c @@ -0,0 +1,94 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +static void +get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); +} + + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (ctrl_num == 0 && i == 0) + i2c_address = SPD_EEPROM_ADDRESS1; + if (ctrl_num == 0 && i == 1) + i2c_address = SPD_EEPROM_ADDRESS2; + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + /* + * Factors to consider for clock adjust: + * - number of chips on bus + * - position of slot + * - DDR1 vs. DDR2? + * - ??? + * + * This needs to be determined on a board-by-board basis. + * 0110 3/4 cycle late + * 0111 7/8 cycle late + */ + popts->clk_adjust = 4; + + /* + * Factors to consider for CPO: + * - frequency + * - ddr1 vs. ddr2 + */ + popts->cpo_override = 0xff; + + /* + * Factors to consider for write data delay: + * - number of DIMMs + * + * 1 = 1/4 clock delay + * 2 = 1/2 clock delay + * 3 = 3/4 clock delay + * 4 = 1 clock delay + * 5 = 5/4 clock delay + * 6 = 3/2 clock delay + */ + popts->write_data_delay = 2; + + /* + * Enable half drive strength + */ + popts->half_strength_driver_enable = 1; + + /* Write leveling override */ + popts->wrlvl_en = 1; + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xa; + popts->wrlvl_start = 0x4; + + /* Rtt and Rtt_W override */ + popts->rtt_override = 1; + popts->rtt_override_value = DDR3_RTT_60_OHM; + popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ +} diff --git a/u-boot/board/freescale/mpc8569mds/law.c b/u-boot/board/freescale/mpc8569mds/law.c new file mode 100644 index 0000000..4f4a93b --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/law.c @@ -0,0 +1,57 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * LAW(Local Access Window) configuration: + * + *0) 0x0000_0000 0x7fff_ffff DDR 2G + *1) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB + *-) 0xe000_0000 0xe00f_ffff CCSR 1M + *2) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M + *3) 0xc000_0000 0xdfff_ffff SRIO 512MB + *4.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB + *4.b) 0xf800_0000 0xf800_7fff BCSR 32KB + *4.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB + *4.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB + *4.e) 0xfe00_0000 0xffff_ffff Flash 32MB + * + *Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + * + */ + +struct law_entry law_table[] = { +#ifndef CONFIG_SPD_EEPROM + SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR), +#endif + SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/u-boot/board/freescale/mpc8569mds/mpc8569mds.c b/u-boot/board/freescale/mpc8569mds/mpc8569mds.c new file mode 100644 index 0000000..ecda222 --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/mpc8569mds.c @@ -0,0 +1,598 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor. + * + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <hwconfig.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/io.h> +#include <spd_sdram.h> +#include <i2c.h> +#include <ioports.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_esdhc.h> + +#include "bcsr.h" +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* QE_MUX_MDC */ + {2, 31, 1, 0, 1}, /* QE_MUX_MDC */ + + /* QE_MUX_MDIO */ + {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */ + +#if defined(CONFIG_SYS_UCC_RGMII_MODE) + /* UCC_1_RGMII */ + {2, 11, 2, 0, 1}, /* CLK12 */ + {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ + {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ + {0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */ + {0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ + {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ + {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ + {0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ + {0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ + {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ + {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ + {2, 8, 2, 0, 1}, /* ENET1_GRXCLK */ + {2, 20, 1, 0, 2}, /* ENET1_GTXCLK */ + + /* UCC_2_RGMII */ + {2, 16, 2, 0, 3}, /* CLK17 */ + {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ + {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ + {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */ + {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */ + {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ + {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ + {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */ + {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */ + {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ + {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ + {2, 3, 2, 0, 1}, /* ENET2_GRXCLK */ + {2, 2, 1, 0, 2}, /* ENET2_GTXCLK */ + + /* UCC_3_RGMII */ + {2, 11, 2, 0, 1}, /* CLK12 */ + {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ + {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ + {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */ + {1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */ + {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ + {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ + {1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */ + {1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */ + {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ + {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ + {2, 9, 2, 0, 2}, /* ENET3_GRXCLK */ + {2, 25, 1, 0, 2}, /* ENET3_GTXCLK */ + + /* UCC_4_RGMII */ + {2, 16, 2, 0, 3}, /* CLK17 */ + {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ + {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ + {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */ + {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */ + {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ + {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ + {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */ + {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */ + {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ + {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ + {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */ + {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */ + +#elif defined(CONFIG_SYS_UCC_RMII_MODE) + /* UCC_1_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ + {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ + {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ + {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ + {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ + {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ + + /* UCC_2_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ + {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ + {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ + {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ + {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ + {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ + + /* UCC_3_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ + {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ + {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ + {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ + {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ + {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ + + /* UCC_4_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ + {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ + {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ + {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ + {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ + {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ +#endif + + /* UART1 is muxed with QE PortF bit [9-12].*/ + {5, 12, 2, 0, 3}, /* UART1_SIN */ + {5, 9, 1, 0, 3}, /* UART1_SOUT */ + {5, 10, 2, 0, 3}, /* UART1_CTS_B */ + {5, 11, 1, 0, 2}, /* UART1_RTS_B */ + + /* QE UART */ + {0, 19, 1, 0, 2}, /* QEUART_TX */ + {1, 17, 2, 0, 3}, /* QEUART_RX */ + {0, 25, 1, 0, 1}, /* QEUART_RTS */ + {1, 23, 2, 0, 1}, /* QEUART_CTS */ + + /* QE USB */ + {5, 3, 1, 0, 1}, /* USB_OE */ + {5, 4, 1, 0, 2}, /* USB_TP */ + {5, 5, 1, 0, 2}, /* USB_TN */ + {5, 6, 2, 0, 2}, /* USB_RP */ + {5, 7, 2, 0, 1}, /* USB_RX */ + {5, 8, 2, 0, 1}, /* USB_RN */ + {2, 4, 2, 0, 2}, /* CLK5 */ + + /* SPI Flash, M25P40 */ + {4, 27, 3, 0, 1}, /* SPI_MOSI */ + {4, 28, 3, 0, 1}, /* SPI_MISO */ + {4, 29, 3, 0, 1}, /* SPI_CLK */ + {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */ + + {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ +}; + +void local_bus_init(void); + +int board_early_init_f (void) +{ + /* + * Initialize local bus. + */ + local_bus_init (); + + enable_8569mds_flash_write(); + +#ifdef CONFIG_QE + enable_8569mds_qe_uec(); +#endif + +#if CONFIG_SYS_I2C2_OFFSET + /* Enable I2C2 signals instead of SD signals */ + volatile struct ccsr_gur *gur; + gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000); + gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK; + gur->plppar1 |= PLPPAR1_I2C2_VAL; + gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK; + gur->plpdir1 |= PLPDIR1_I2C2_VAL; + + disable_8569mds_brd_eeprom_write_protect(); +#endif + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_NAND_BASE; + const u8 flash_esel = 0; + + /* + * Remap Boot flash to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */ + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ + 0, flash_esel, /* ts, esel */ + BOOKE_PAGESZ_64M, 1); /* tsize, iprot */ + + return 0; +} + +int checkboard (void) +{ + printf ("Board: 8569 MDS\n"); + + return 0; +} + +#if !defined(CONFIG_SPD_EEPROM) +phys_size_t fixed_sdram(void) +{ + volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + uint d_init; + + out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); + out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); + out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); + out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); + out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); + out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); + out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); + out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE); + out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2); + out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL); + out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); + out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); + out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); + out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); + out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL); + out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL); + out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); +#if defined (CONFIG_DDR_ECC) + out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN); + out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS); + out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE); +#endif + udelay(500); + + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); +#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + d_init = 1; + debug("DDR - 1st controller: memory initializing\n"); + /* + * Poll until memory is initialized. + * 512 Meg at 400 might hit this 200 times or so. + */ + while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { + udelay(1000); + } + debug("DDR: memory initialized\n\n"); + udelay(500); +#endif + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; +} +#endif + +/* + * Initialize Local Bus + */ +void +local_bus_init(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + + uint clkdiv; + uint lbc_hz; + sys_info_t sysinfo; + + get_sys_info(&sysinfo); + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; + lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + + out_be32(&gur->lbiuiplldcr1, 0x00078080); + if (clkdiv == 16) + out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); + else if (clkdiv == 8) + out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); + else if (clkdiv == 4) + out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); + + out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000); +} + +static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias) +{ + const char *status = "disabled"; + int off; + int err; + + off = fdt_path_offset(blob, alias); + if (off < 0) { + printf("WARNING: could not find %s alias: %s.\n", alias, + fdt_strerror(off)); + return; + } + + err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); + if (err) { + printf("WARNING: could not set status for serial0: %s.\n", + fdt_strerror(err)); + return; + } +} + +/* + * Because of an erratum in prototype boards it is impossible to use eSDHC + * without disabling UART0 (which makes it quite easy to 'brick' the board + * by simply issung 'setenv hwconfig esdhc', and not able to interact with + * U-Boot anylonger). + * + * So, but default we assume that the board is a prototype, which is a most + * safe assumption. There is no way to determine board revision from a + * register, so we use hwconfig. + */ + +static int prototype_board(void) +{ + if (hwconfig_subarg("board", "rev", NULL)) + return hwconfig_subarg_cmp("board", "rev", "prototype"); + return 1; +} + +static int esdhc_disables_uart0(void) +{ + return prototype_board() || + hwconfig_subarg_cmp("esdhc", "mode", "4-bits"); +} + +static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd) +{ + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; + const char *devtype = "serial"; + const char *compat = "ucc_uart"; + const char *clk = "brg9"; + u32 portnum = 0; + int off = -1; + + if (!hwconfig("qe_uart")) + return; + + if (hwconfig("esdhc") && esdhc_disables_uart0()) { + printf("QE UART: won't enable with esdhc.\n"); + return; + } + + fdt_board_disable_serial(blob, bd, "serial1"); + + while (1) { + const u32 *idx; + int len; + + off = fdt_node_offset_by_compatible(blob, off, "ucc_geth"); + if (off < 0) { + printf("WARNING: unable to fixup device tree for " + "QE UART\n"); + return; + } + + idx = fdt_getprop(blob, off, "cell-index", &len); + if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2)) + continue; + break; + } + + fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1); + fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1); + fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1); + fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1); + fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum)); + + setbits_8(&bcsr[15], BCSR15_QEUART_EN); +} + +#ifdef CONFIG_FSL_ESDHC + +int board_mmc_init(bd_t *bd) +{ + struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; + u8 bcsr6 = BCSR6_SD_CARD_1BIT; + + if (!hwconfig("esdhc")) + return 0; + + printf("Enabling eSDHC...\n" + " For eSDHC to function, I2C2 "); + if (esdhc_disables_uart0()) { + printf("and UART0 should be disabled.\n"); + printf(" Redirecting stderr, stdout and stdin to UART1...\n"); + console_assign(stderr, "eserial1"); + console_assign(stdout, "eserial1"); + console_assign(stdin, "eserial1"); + printf("Switched to UART1 (initial log has been printed to " + "UART0).\n"); + + clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK, + PLPPAR1_ESDHC_4BITS_VAL); + clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK, + PLPDIR1_ESDHC_4BITS_VAL); + bcsr6 |= BCSR6_SD_CARD_4BITS; + } else { + printf("should be disabled.\n"); + } + + /* Assign I2C2 signals to eSDHC. */ + clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK, + PLPPAR1_ESDHC_VAL); + clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK, + PLPDIR1_ESDHC_VAL); + + /* Mux I2C2 (and optionally UART0) signals to eSDHC. */ + setbits_8(&bcsr[6], bcsr6); + + return fsl_esdhc_mmc_init(bd); +} + +static void fdt_board_fixup_esdhc(void *blob, bd_t *bd) +{ + const char *status = "disabled"; + int off = -1; + + if (!hwconfig("esdhc")) + return; + + if (esdhc_disables_uart0()) + fdt_board_disable_serial(blob, bd, "serial0"); + + while (1) { + const u32 *idx; + int len; + + off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c"); + if (off < 0) + break; + + idx = fdt_getprop(blob, off, "cell-index", &len); + if (!idx || len != sizeof(*idx)) + continue; + + if (*idx == 1) { + fdt_setprop(blob, off, "status", status, + strlen(status) + 1); + break; + } + } + + if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) { + off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc"); + if (off < 0) { + printf("WARNING: could not find esdhc node\n"); + return; + } + fdt_delprop(blob, off, "sdhci,1-bit-only"); + } +} +#else +static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {} +#endif + +static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd) +{ + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; + + if (hwconfig_subarg_cmp("qe_usb", "speed", "low")) + clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); + else + setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); + + if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) { + clrbits_8(&bcsr[17], BCSR17_USBVCC); + clrbits_8(&bcsr[17], BCSR17_USBMODE); + do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode", + "peripheral", sizeof("peripheral"), 1); + } else { + setbits_8(&bcsr[17], BCSR17_USBVCC); + setbits_8(&bcsr[17], BCSR17_USBMODE); + } + + clrbits_8(&bcsr[17], BCSR17_nUSBEN); +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ +#if defined(CONFIG_PQ_MDS_PIB) + pib_init(); +#endif + + fsl_pcie_init_board(0); +} +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_SYS_UCC_RMII_MODE) + int nodeoff, off, err; + unsigned int val; + const u32 *ph; + const u32 *index; + + /* fixup device tree for supporting rmii mode */ + nodeoff = -1; + while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff, + "ucc_geth")) >= 0) { + err = fdt_setprop_string(blob, nodeoff, "tx-clock-name", + "clk16"); + if (err < 0) { + printf("WARNING: could not set tx-clock-name %s.\n", + fdt_strerror(err)); + break; + } + + err = fdt_fixup_phy_connection(blob, nodeoff, RMII); + + if (err < 0) { + printf("WARNING: could not set phy-connection-type " + "%s.\n", fdt_strerror(err)); + break; + } + + index = fdt_getprop(blob, nodeoff, "cell-index", 0); + if (index == NULL) { + printf("WARNING: could not get cell-index of ucc\n"); + break; + } + + ph = fdt_getprop(blob, nodeoff, "phy-handle", 0); + if (ph == NULL) { + printf("WARNING: could not get phy-handle of ucc\n"); + break; + } + + off = fdt_node_offset_by_phandle(blob, *ph); + if (off < 0) { + printf("WARNING: could not get phy node %s.\n", + fdt_strerror(err)); + break; + } + + val = 0x7 + *index; /* RMII phy address starts from 0x8 */ + + err = fdt_setprop(blob, off, "reg", &val, sizeof(u32)); + if (err < 0) { + printf("WARNING: could not set reg for phy-handle " + "%s.\n", fdt_strerror(err)); + break; + } + } +#endif + ft_cpu_setup(blob, bd); + + FT_FSL_PCI_SETUP; + + fdt_board_fixup_esdhc(blob, bd); + fdt_board_fixup_qe_uart(blob, bd); + fdt_board_fixup_qe_usb(blob, bd); +} +#endif diff --git a/u-boot/board/freescale/mpc8569mds/tlb.c b/u-boot/board/freescale/mpc8569mds/tlb.c new file mode 100644 index 0000000..f852fc3 --- /dev/null +++ b/u-boot/board/freescale/mpc8569mds/tlb.c @@ -0,0 +1,111 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 Initializations */ + /* + * TLBe 0: 64M write-through, guarded + * Out of reset this entry is only 4K. + * 0xfc000000 32MB NAND FLASH (CS3) + * 0xfe000000 32MB NOR FLASH (CS0) + */ +#ifdef CONFIG_NAND_SPL + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_64M, 1), +#endif + /* + * TLBe 1: 256KB Non-cacheable, guarded + * 0xf8000000 32K BCSR + * 0xf8008000 32K PIB (CS4) + * 0xf8010000 32K PIB (CS5) + */ + SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_256K, 1), + + /* + * TLBe 2: 256M Non-cacheable, guarded + * 0xa00000000 256M PCIe MEM (lower half) + */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLBe 3: 256M Non-cacheable, guarded + * 0xb00000000 256M PCIe MEM (higher half) + */ + SET_TLB_ENTRY(1, (CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000), + (CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000), + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLBe 4: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe280_0000 8M PCIe IO + */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_64M, 1), + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); |