1 files changed, 84 insertions, 0 deletions
diff --git a/u-boot/board/freescale/mx31pdk/mx31pdk.c b/u-boot/board/freescale/mx31pdk/mx31pdk.c
new file mode 100644
index 0000000..a9f0fb4
--- /dev/null
+++ b/u-boot/board/freescale/mx31pdk/mx31pdk.c
@@ -0,0 +1,84 @@
+/*
+ *
+ * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
+				PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+int board_early_init_f(void)
+{
+	/* CS5: CPLD incl. network controller */
+	__REG(CSCR_U(5)) = 0x0000d843;
+	__REG(CSCR_L(5)) = 0x22252521;
+	__REG(CSCR_A(5)) = 0x22220a00;
+
+	/* Setup UART1 and SPI2 pins */
+	mx31_uart1_hw_init();
+	mx31_spi2_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_MX31_3DS; /* board id for linux */
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: i.MX31 MAX PDK (3DS)\n");
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}