diff options
Diffstat (limited to 'u-boot/board/gcplus/lowlevel_init.S')
| -rw-r--r-- | u-boot/board/gcplus/lowlevel_init.S | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/u-boot/board/gcplus/lowlevel_init.S b/u-boot/board/gcplus/lowlevel_init.S new file mode 100644 index 0000000..f292c4d --- /dev/null +++ b/u-boot/board/gcplus/lowlevel_init.S @@ -0,0 +1,77 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * 2003-2004 (c) MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include "config.h" +#include "version.h" + + + .globl lowlevel_init +lowlevel_init: + /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us. + * However the darn thing leaves the MMU enabled before handing control + * over to us. So we need to disable the MMU and we use lowlevel_init + * to do it. + */ + +@ The following code segment was borrowed with gratitude from: +@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S + + @ Data cache might be active. + @ Be sure to flush kernel binary out of the cache, + @ whatever state it is, before it is turned off. + @ This is done by fetching through currently executed + @ memory to be sure we hit the same cache. + bic r2, pc, #0x1f + add r3, r2, #0x4000 @ 16 kb is quite enough... +1: ldr r0, [r2], #32 + teq r2, r3 + bne 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches + + @ disabling MMU and caches + mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #0x0d @ clear WB, DC, MMU + bic r0, r0, #0x1000 @ clear Icache + mcr p15, 0, r0, c1, c0, 0 + + nop + nop + nop + nop + nop + + b 2f +2: + nop + nop + nop + nop + nop + + + mov pc, lr |