diff options
Diffstat (limited to 'u-boot/board/tqc/tqm5200/cmd_stk52xx.c')
| -rw-r--r-- | u-boot/board/tqc/tqm5200/cmd_stk52xx.c | 1242 |
1 files changed, 1242 insertions, 0 deletions
diff --git a/u-boot/board/tqc/tqm5200/cmd_stk52xx.c b/u-boot/board/tqc/tqm5200/cmd_stk52xx.c new file mode 100644 index 0000000..0789c58 --- /dev/null +++ b/u-boot/board/tqc/tqm5200/cmd_stk52xx.c @@ -0,0 +1,1242 @@ +/* + * (C) Copyright 2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * STK52XX specific functions + */ +/*#define DEBUG*/ + +#include <common.h> +#include <command.h> + +#if defined(CONFIG_CMD_BSP) + +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#define DEFAULT_VOL 45 +#define DEFAULT_FREQ 500 +#define DEFAULT_DURATION 200 +#define LEFT 1 +#define RIGHT 2 +#define LEFT_RIGHT 3 +#define BL_OFF 0 +#define BL_ON 1 + +#define SM501_GPIO_CTRL_LOW 0x00000008UL +#define SM501_GPIO_CTRL_HIGH 0x0000000CUL +#define SM501_POWER_MODE0_GATE 0x00000040UL +#define SM501_POWER_MODE1_GATE 0x00000048UL +#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL +#define SM501_GPIO_DATA_LOW 0x00010000UL +#define SM501_GPIO_DATA_HIGH 0x00010004UL +#define SM501_GPIO_DATA_DIR_LOW 0x00010008UL +#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL +#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL + +static int i2s_squarewave(unsigned long duration, unsigned int freq, + unsigned int channel); +static int i2s_sawtooth(unsigned long duration, unsigned int freq, + unsigned int channel); +static void spi_init(void); +static int spi_transmit(unsigned char data); +static void pcm1772_write_reg(unsigned char addr, unsigned char data); +static void set_attenuation(unsigned char attenuation); + +static void spi_init(void) +{ + struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + /* PSC3 as SPI and GPIOs */ + gpio->port_config &= 0xFFFFF0FF; + gpio->port_config |= 0x00000800; + /* + * Its important to use the correct order when initializing the + * registers + */ + spi->ddr = 0x0F; /* set all SPI pins as output */ + spi->pdr = 0x08; /* set SS high */ + spi->cr1 = 0x50; /* SPI is master, SS is general purpose output */ + spi->cr2 = 0x00; /* normal operation */ + spi->brr = 0xFF; /* baud rate: IPB clock / 2048 */ +} + +static int spi_transmit(unsigned char data) +{ + int dummy; + struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; + + spi->dr = data; + /* wait for SPI transmission completed */ + while(!(spi->sr & 0x80)) + { + if (spi->sr & 0x40) /* if write collision occured */ + { + /* do dummy read to clear status register */ + dummy = spi->dr; + printf ("SPI write collision\n"); + return -1; + } + } + return (spi->dr); +} + +static void pcm1772_write_reg(unsigned char addr, unsigned char data) +{ + struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; + + spi->pdr = 0x00; /* Set SS low */ + spi_transmit(addr); + spi_transmit(data); + /* wait some time to meet MS# hold time of PCM1772 */ + udelay (1); + spi->pdr = 0x08; /* set SS high */ +} + +static void set_attenuation(unsigned char attenuation) +{ + pcm1772_write_reg(0x01, attenuation); /* left channel */ + debug ("PCM1772 attenuation left set to %d.\n", attenuation); + pcm1772_write_reg(0x02, attenuation); /* right channel */ + debug ("PCM1772 attenuation right set to %d.\n", attenuation); +} + +void amplifier_init(void) +{ + static int init_done = 0; + int i; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + /* Do this only once, because of the long time delay */ + if (!init_done) { + /* configure PCM1772 audio format as I2S */ + pcm1772_write_reg(0x03, 0x01); + /* enable audio amplifier */ + gpio->sint_gpioe |= 0x02; /* PSC3_5 as GPIO */ + gpio->sint_ode &= ~0x02; /* PSC3_5 is not open Drain */ + gpio->sint_dvo &= ~0x02; /* PSC3_5 is LOW */ + gpio->sint_ddr |= 0x02; /* PSC3_5 as output */ + /* + * wait some time to allow amplifier to recover from shutdown + * mode. + */ + for(i = 0; i < 350; i++) + udelay(1000); + /* + * The used amplifier (LM4867) has a so called "pop and click" + * elmination filter. The input signal of the amplifier must + * exceed a certain level once after power up to activate the + * generation of the output signal. This is achieved by + * sending a low frequent (nearly inaudible) sawtooth with a + * sufficient signal level. + */ + set_attenuation(50); + i2s_sawtooth (200, 5, LEFT_RIGHT); + init_done = 1; + } +} + +static void i2s_init(void) +{ + unsigned long i; + struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2;; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + gpio->port_config |= 0x00000070; /* PSC2 ports as Codec with MCLK */ + psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); + psc->sicr = 0x22E00000; /* 16 bit data; I2S */ + + *(vu_long *)(CONFIG_SYS_MBAR + 0x22C) = 0x805d; /* PSC2 CDM MCLK config; MCLK + * 5.617 MHz */ + *(vu_long *)(CONFIG_SYS_MBAR + 0x214) |= 0x00000040; /* CDM clock enable + * register */ + psc->ccr = 0x1F03; /* 16 bit data width; 5.617MHz MCLK */ + psc->ctur = 0x0F; /* 16 bit frame width */ + + for(i=0;i<128;i++) + { + psc->psc_buffer_32 = 0; /* clear tx fifo */ + } +} + +static int i2s_play_wave(unsigned long addr, unsigned long len) +{ + unsigned long i; + unsigned char *wave_file = (uchar *)addr + 44; /* quick'n dirty: skip + * wav header*/ + unsigned char swapped[4]; + struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; + + /* + * play wave file in memory; bytes/words are be swapped + */ + psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); + + for(i = 0;i < (len / 4); i++) { + swapped[3] = *wave_file++; + swapped[2] = *wave_file++; + swapped[1] = *wave_file++; + swapped[0] = *wave_file++; + psc->psc_buffer_32 = *((unsigned long*)swapped); + while (psc->tfnum > 400) { + if(ctrlc()) + return 0; + } + } + while (psc->tfnum > 0); /* wait for fifo empty */ + udelay (100); + psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); + return 0; +} + +static int i2s_sawtooth(unsigned long duration, unsigned int freq, + unsigned int channel) +{ + long i,j; + unsigned long data; + struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; + + psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); + + /* + * Generate sawtooth. Start with middle level up to highest level. Then + * go to lowest level and back to middle level. + */ + for(j = 0; j < ((duration * freq) / 1000); j++) { + for(i = 0; i <= 0x7FFF; i += (0x7FFF/(44100/(freq*4)))) { + data = (i & 0xFFFF); + /* data format: right data left data) */ + if (channel == LEFT_RIGHT) + data |= (data<<16); + if (channel == RIGHT) + data = (data<<16); + psc->psc_buffer_32 = data; + while (psc->tfnum > 400); + } + for(i = 0x7FFF; i >= -0x7FFF; i -= (0xFFFF/(44100/(freq*2)))) { + data = (i & 0xFFFF); + /* data format: right data left data) */ + if (channel == LEFT_RIGHT) + data |= (data<<16); + if (channel == RIGHT) + data = (data<<16); + psc->psc_buffer_32 = data; + while (psc->tfnum > 400); + } + for(i = -0x7FFF; i <= 0; i += (0x7FFF/(44100/(freq*4)))) { + data = (i & 0xFFFF); + /* data format: right data left data) */ + if (channel == LEFT_RIGHT) + data |= (data<<16); + if (channel == RIGHT) + data = (data<<16); + psc->psc_buffer_32 = data; + while (psc->tfnum > 400); + } + } + while (psc->tfnum > 0); /* wait for fifo empty */ + udelay (100); + psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); + + return 0; +} + +static int i2s_squarewave(unsigned long duration, unsigned int freq, + unsigned int channel) +{ + long i,j; + unsigned long data; + struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; + + psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); + + /* + * Generate sqarewave. Start with high level, duty cycle 1:1. + */ + for(j = 0; j < ((duration * freq) / 1000); j++) { + for(i = 0; i < (44100/(freq*2)); i ++) { + data = 0x7FFF; + /* data format: right data left data) */ + if (channel == LEFT_RIGHT) + data |= (data<<16); + if (channel == RIGHT) + data = (data<<16); + psc->psc_buffer_32 = data; + while (psc->tfnum > 400); + } + for(i = 0; i < (44100/(freq*2)); i ++) { + data = 0x8000; + /* data format: right data left data) */ + if (channel == LEFT_RIGHT) + data |= (data<<16); + if (channel == RIGHT) + data = (data<<16); + psc->psc_buffer_32 = data; + while (psc->tfnum > 400); + } + } + while (psc->tfnum > 0); /* wait for fifo empty */ + udelay (100); + psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); + + return 0; +} + +static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned long reg, val, duration; + char *tmp; + unsigned int freq, channel; + unsigned char volume; + int rcode = 1; + +#ifdef CONFIG_STK52XX_REV100 + printf ("Revision 100 of STK52XX not supported!\n"); + return 1; +#endif + spi_init(); + i2s_init(); + amplifier_init(); + + if ((tmp = getenv ("volume")) != NULL) { + volume = simple_strtoul (tmp, NULL, 10); + } else { + volume = DEFAULT_VOL; + } + set_attenuation(volume); + + switch (argc) { + case 0: + case 1: + return cmd_usage(cmdtp); + case 2: + if (strncmp(argv[1],"saw",3) == 0) { + printf ("Play sawtooth\n"); + rcode = i2s_sawtooth (DEFAULT_DURATION, DEFAULT_FREQ, + LEFT_RIGHT); + return rcode; + } else if (strncmp(argv[1],"squ",3) == 0) { + printf ("Play squarewave\n"); + rcode = i2s_squarewave (DEFAULT_DURATION, DEFAULT_FREQ, + LEFT_RIGHT); + return rcode; + } + + return cmd_usage(cmdtp); + case 3: + if (strncmp(argv[1],"saw",3) == 0) { + duration = simple_strtoul(argv[2], NULL, 10); + printf ("Play sawtooth\n"); + rcode = i2s_sawtooth (duration, DEFAULT_FREQ, + LEFT_RIGHT); + return rcode; + } else if (strncmp(argv[1],"squ",3) == 0) { + duration = simple_strtoul(argv[2], NULL, 10); + printf ("Play squarewave\n"); + rcode = i2s_squarewave (duration, DEFAULT_FREQ, + LEFT_RIGHT); + return rcode; + } + return cmd_usage(cmdtp); + case 4: + if (strncmp(argv[1],"saw",3) == 0) { + duration = simple_strtoul(argv[2], NULL, 10); + freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); + printf ("Play sawtooth\n"); + rcode = i2s_sawtooth (duration, freq, + LEFT_RIGHT); + return rcode; + } else if (strncmp(argv[1],"squ",3) == 0) { + duration = simple_strtoul(argv[2], NULL, 10); + freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); + printf ("Play squarewave\n"); + rcode = i2s_squarewave (duration, freq, + LEFT_RIGHT); + return rcode; + } else if (strcmp(argv[1],"pcm1772") == 0) { + reg = simple_strtoul(argv[2], NULL, 10); + val = simple_strtoul(argv[3], NULL, 10); + printf("Set PCM1772 %lu. %lu\n", reg, val); + pcm1772_write_reg((uchar)reg, (uchar)val); + return 0; + } + return cmd_usage(cmdtp); + case 5: + if (strncmp(argv[1],"saw",3) == 0) { + duration = simple_strtoul(argv[2], NULL, 10); + freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); + if (strncmp(argv[4],"l",1) == 0) + channel = LEFT; + else if (strncmp(argv[4],"r",1) == 0) + channel = RIGHT; + else + channel = LEFT_RIGHT; + printf ("Play squarewave\n"); + rcode = i2s_sawtooth (duration, freq, + channel); + return rcode; + } else if (strncmp(argv[1],"squ",3) == 0) { + duration = simple_strtoul(argv[2], NULL, 10); + freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); + if (strncmp(argv[4],"l",1) == 0) + channel = LEFT; + else if (strncmp(argv[4],"r",1) == 0) + channel = RIGHT; + else + channel = LEFT_RIGHT; + printf ("Play squarewave\n"); + rcode = i2s_squarewave (duration, freq, + channel); + return rcode; + } + return cmd_usage(cmdtp); + } + printf ("Usage:\nsound cmd [arg1] [arg2] ...\n"); + return 1; +} + +static int cmd_wav(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned long length, addr; + unsigned char volume; + int rcode = 1; + char *tmp; + +#ifdef CONFIG_STK52XX_REV100 + printf ("Revision 100 of STK52XX not supported!\n"); + return 1; +#endif + spi_init(); + i2s_init(); + amplifier_init(); + + switch (argc) { + + case 3: + length = simple_strtoul(argv[2], NULL, 16); + addr = simple_strtoul(argv[1], NULL, 16); + break; + + case 2: + if ((tmp = getenv ("filesize")) != NULL) { + length = simple_strtoul (tmp, NULL, 16); + } else { + puts ("No filesize provided\n"); + return 1; + } + addr = simple_strtoul(argv[1], NULL, 16); + + case 1: + if ((tmp = getenv ("filesize")) != NULL) { + length = simple_strtoul (tmp, NULL, 16); + } else { + puts ("No filesize provided\n"); + return 1; + } + if ((tmp = getenv ("loadaddr")) != NULL) { + addr = simple_strtoul (tmp, NULL, 16); + } else { + puts ("No loadaddr provided\n"); + return 1; + } + break; + + default: + printf("Usage:\nwav <addr> <length[s]\n"); + return 1; + break; + } + + if ((tmp = getenv ("volume")) != NULL) { + volume = simple_strtoul (tmp, NULL, 10); + } else { + volume = DEFAULT_VOL; + } + set_attenuation(volume); + + printf("Play wave file at %lX with length %lX\n", addr, length); + rcode = i2s_play_wave(addr, length); + + return rcode; +} + +static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned char volume; + unsigned int channel; + int rcode; + char *tmp; + +#ifdef CONFIG_STK52XX_REV100 + printf ("Revision 100 of STK52XX not supported!\n"); + return 1; +#endif + spi_init(); + i2s_init(); + amplifier_init(); + + switch (argc) { + case 0: + case 1: + channel = LEFT_RIGHT; + break; + case 2: + if (strncmp(argv[1],"l",1) == 0) + channel = LEFT; + else if (strncmp(argv[1],"r",1) == 0) + channel = RIGHT; + else + channel = LEFT_RIGHT; + break; + default: + return cmd_usage(cmdtp); + } + + if ((tmp = getenv ("volume")) != NULL) { + volume = simple_strtoul (tmp, NULL, 10); + } else { + volume = DEFAULT_VOL; + } + set_attenuation(volume); + + printf("Beep on "); + if (channel == LEFT) + printf ("left "); + else if (channel == RIGHT) + printf ("right "); + else + printf ("left and right "); + printf ("channel\n"); + + rcode = i2s_squarewave (DEFAULT_DURATION, DEFAULT_FREQ, channel); + + return rcode; +} +#endif + +#if defined(CONFIG_STK52XX) +void led_init(void) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + /* configure PSC3 for SPI and GPIO */ + gpio->port_config &= ~(0x00000F00); + gpio->port_config |= 0x00000800; + + gpio->simple_gpioe &= ~(0x00000F00); + gpio->simple_gpioe |= 0x00000F00; + + gpio->simple_ddr &= ~(0x00000F00); + gpio->simple_ddr |= 0x00000F00; + + /* configure timer 4-7 for simple GPIO output */ + gpt->gpt4.emsr |= 0x00000024; + gpt->gpt5.emsr |= 0x00000024; + gpt->gpt6.emsr |= 0x00000024; + gpt->gpt7.emsr |= 0x00000024; + +#ifndef CONFIG_TQM5200S + /* enable SM501 GPIO control (in both power modes) */ + *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= + POWER_MODE_GATE_GPIO_PWM_I2C; + *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE1_GATE) |= + POWER_MODE_GATE_GPIO_PWM_I2C; + + /* configure SM501 gpio pins 24-27 as output */ + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_CTRL_LOW) &= ~(0xF << 24); + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_LOW) |= (0xF << 24); + + /* configure SM501 gpio pins 48-51 as output */ + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16); +#endif /* !CONFIG_TQM5200S */ +} + +/* + * return 1 if led number unknown + * return 0 else + */ +int do_led(char * const argv[]) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + switch (simple_strtoul(argv[2], NULL, 10)) { + + case 0: + if (strcmp (argv[3], "on") == 0) { + gpio->simple_dvo |= (1 << 8); + } else { + gpio->simple_dvo &= ~(1 << 8); + } + break; + + case 1: + if (strcmp (argv[3], "on") == 0) { + gpio->simple_dvo |= (1 << 9); + } else { + gpio->simple_dvo &= ~(1 << 9); + } + break; + + case 2: + if (strcmp (argv[3], "on") == 0) { + gpio->simple_dvo |= (1 << 10); + } else { + gpio->simple_dvo &= ~(1 << 10); + } + break; + + case 3: + if (strcmp (argv[3], "on") == 0) { + gpio->simple_dvo |= (1 << 11); + } else { + gpio->simple_dvo &= ~(1 << 11); + } + break; + + case 4: + if (strcmp (argv[3], "on") == 0) { + gpt->gpt4.emsr |= (1 << 4); + } else { + gpt->gpt4.emsr &= ~(1 << 4); + } + break; + + case 5: + if (strcmp (argv[3], "on") == 0) { + gpt->gpt5.emsr |= (1 << 4); + } else { + gpt->gpt5.emsr &= ~(1 << 4); + } + break; + + case 6: + if (strcmp (argv[3], "on") == 0) { + gpt->gpt6.emsr |= (1 << 4); + } else { + gpt->gpt6.emsr &= ~(1 << 4); + } + break; + + case 7: + if (strcmp (argv[3], "on") == 0) { + gpt->gpt7.emsr |= (1 << 4); + } else { + gpt->gpt7.emsr &= ~(1 << 4); + } + break; +#ifndef CONFIG_TQM5200S + case 24: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= + (0x1 << 24); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= + ~(0x1 << 24); + } + break; + + case 25: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= + (0x1 << 25); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= + ~(0x1 << 25); + } + break; + + case 26: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= + (0x1 << 26); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= + ~(0x1 << 26); + } + break; + + case 27: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= + (0x1 << 27); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= + ~(0x1 << 27); + } + break; + + case 48: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= + (0x1 << 16); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= + ~(0x1 << 16); + } + break; + + case 49: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= + (0x1 << 17); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= + ~(0x1 << 17); + } + break; + + case 50: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= + (0x1 << 18); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= + ~(0x1 << 18); + } + break; + + case 51: + if (strcmp (argv[3], "on") == 0) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= + (0x1 << 19); + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= + ~(0x1 << 19); + } + break; +#endif /* !CONFIG_TQM5200S */ + default: + printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]); + return 1; + } + + return 0; +} +#endif + +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +/* + * return 1 on CAN initialization failure + * return 0 if no failure + */ +int can_init(void) +{ + static int init_done = 0; + int i; + struct mpc5xxx_mscan *can1 = + (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0900); + struct mpc5xxx_mscan *can2 = + (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0980); + + /* GPIO configuration of the CAN pins is done in TQM5200.h */ + + if (!init_done) { + /* init CAN 1 */ + can1->canctl1 |= 0x80; /* CAN enable */ + udelay(100); + + i = 0; + can1->canctl0 |= 0x02; /* sleep mode */ + /* wait until sleep mode reached */ + while (!(can1->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN1 initialize error, " + "can not enter sleep mode!\n", + __FUNCTION__); + return 1; + } + } + i = 0; + can1->canctl0 = 0x01; /* enter init mode */ + /* wait until init mode reached */ + while (!(can1->canctl1 & 0x01)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN1 initialize error, " + "can not enter init mode!\n", + __FUNCTION__); + return 1; + } + } + can1->canctl1 = 0x80; + can1->canctl1 |= 0x40; + can1->canbtr0 = 0x0F; + can1->canbtr1 = 0x7F; + can1->canidac &= ~(0x30); + can1->canidar1 = 0x00; + can1->canidar3 = 0x00; + can1->canidar5 = 0x00; + can1->canidar7 = 0x00; + can1->canidmr0 = 0xFF; + can1->canidmr1 = 0xFF; + can1->canidmr2 = 0xFF; + can1->canidmr3 = 0xFF; + can1->canidmr4 = 0xFF; + can1->canidmr5 = 0xFF; + can1->canidmr6 = 0xFF; + can1->canidmr7 = 0xFF; + + i = 0; + can1->canctl0 &= ~(0x01); /* leave init mode */ + can1->canctl0 &= ~(0x02); + /* wait until init and sleep mode left */ + while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN1 initialize error, " + "can not leave init/sleep mode!\n", + __FUNCTION__); + return 1; + } + } + + /* init CAN 2 */ + can2->canctl1 |= 0x80; /* CAN enable */ + udelay(100); + + i = 0; + can2->canctl0 |= 0x02; /* sleep mode */ + /* wait until sleep mode reached */ + while (!(can2->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN2 initialize error, " + "can not enter sleep mode!\n", + __FUNCTION__); + return 1; + } + } + i = 0; + can2->canctl0 = 0x01; /* enter init mode */ + /* wait until init mode reached */ + while (!(can2->canctl1 & 0x01)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN2 initialize error, " + "can not enter init mode!\n", + __FUNCTION__); + return 1; + } + } + can2->canctl1 = 0x80; + can2->canctl1 |= 0x40; + can2->canbtr0 = 0x0F; + can2->canbtr1 = 0x7F; + can2->canidac &= ~(0x30); + can2->canidar1 = 0x00; + can2->canidar3 = 0x00; + can2->canidar5 = 0x00; + can2->canidar7 = 0x00; + can2->canidmr0 = 0xFF; + can2->canidmr1 = 0xFF; + can2->canidmr2 = 0xFF; + can2->canidmr3 = 0xFF; + can2->canidmr4 = 0xFF; + can2->canidmr5 = 0xFF; + can2->canidmr6 = 0xFF; + can2->canidmr7 = 0xFF; + can2->canctl0 &= ~(0x01); /* leave init mode */ + can2->canctl0 &= ~(0x02); + + i = 0; + /* wait until init mode left */ + while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN2 initialize error, " + "can not leave init/sleep mode!\n", + __FUNCTION__); + return 1; + } + } + init_done = 1; + } + return 0; +} + +/* + * return 1 on CAN failure + * return 0 if no failure + */ +int do_can(char * const argv[]) +{ + int i; + struct mpc5xxx_mscan *can1 = + (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0900); + struct mpc5xxx_mscan *can2 = + (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0980); + + /* send a message on CAN1 */ + can1->cantbsel = 0x01; + can1->cantxfg.idr[0] = 0x55; + can1->cantxfg.idr[1] = 0x00; + can1->cantxfg.idr[1] &= ~0x8; + can1->cantxfg.idr[1] &= ~0x10; + can1->cantxfg.dsr[0] = 0xCC; + can1->cantxfg.dlr = 1; + can1->cantxfg.tbpr = 0; + can1->cantflg = 0x01; + + i = 0; + while ((can1->cantflg & 0x01) == 0) { + i++; + if (i == 10) { + printf ("%s: CAN1 send timeout, " + "can not send message!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + udelay(1000); + + i = 0; + while (!(can2->canrflg & 0x01)) { + i++; + if (i == 10) { + printf ("%s: CAN2 receive timeout, " + "no message received!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + + if (can2->canrxfg.dsr[0] != 0xCC) { + printf ("%s: CAN2 receive error, " + "data mismatch!\n", + __FUNCTION__); + return 1; + } + + /* send a message on CAN2 */ + can2->cantbsel = 0x01; + can2->cantxfg.idr[0] = 0x55; + can2->cantxfg.idr[1] = 0x00; + can2->cantxfg.idr[1] &= ~0x8; + can2->cantxfg.idr[1] &= ~0x10; + can2->cantxfg.dsr[0] = 0xCC; + can2->cantxfg.dlr = 1; + can2->cantxfg.tbpr = 0; + can2->cantflg = 0x01; + + i = 0; + while ((can2->cantflg & 0x01) == 0) { + i++; + if (i == 10) { + printf ("%s: CAN2 send error, " + "can not send message!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + udelay(1000); + + i = 0; + while (!(can1->canrflg & 0x01)) { + i++; + if (i == 10) { + printf ("%s: CAN1 receive timeout, " + "no message received!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + + if (can1->canrxfg.dsr[0] != 0xCC) { + printf ("%s: CAN1 receive error 0x%02x\n", + __FUNCTION__, (can1->canrxfg.dsr[0])); + return 1; + } + + return 0; +} + +/* + * return 1 if rs232 port unknown + * return 2 on txd/rxd failure (only rs232 2) + * return 3 on rts/cts failure + * return 0 if no failure + */ +int do_rs232(char * const argv[]) +{ + int error_status = 0; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; + + switch (simple_strtoul(argv[2], NULL, 10)) { + + case 1: + /* check RTS <-> CTS loop */ + /* set rts to 0 */ + psc1->op1 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 0) { + error_status = 3; + printf ("%s: failure at rs232_1, cts status is %d " + "(should be 0)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + + /* set rts to 1 */ + psc1->op0 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 1) { + error_status = 3; + printf ("%s: failure at rs232_1, cts status is %d " + "(should be 1)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + + break; + + case 2: + /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ + gpio->simple_ddr &= ~(0x00000F00); + gpio->simple_ddr |= 0x00000500; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000200) { + error_status = 2; + printf ("%s: failure at rs232_2, rxd status is %d " + "(should be 1)\n", + __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000000) { + error_status = 2; + printf ("%s: failure at rs232_2, rxd status is %d " + "(should be 0)\n", + __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000800) { + error_status = 3; + printf ("%s: failure at rs232_2, cts status is %d " + "(should be 1)\n", + __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000000) { + error_status = 3; + printf ("%s: failure at rs232_2, cts status is %d " + "(should be 0)\n", + __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + + /* set PSC3_0, PSC3_1, PSC3_2 and PSC3_3 as output */ + gpio->simple_ddr &= ~(0x00000F00); + gpio->simple_ddr |= 0x00000F00; + break; + + default: + printf ("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); + error_status = 1; + break; + } + + return error_status; +} + +#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) +static void sm501_backlight (unsigned int state) +{ + if (state == BL_ON) { + *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) |= + (1 << 26) | (1 << 27); + } else if (state == BL_OFF) + *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= + ~((1 << 26) | (1 << 27)); +} +#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ + +int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rcode; + +#ifdef CONFIG_STK52XX_REV100 + printf ("Revision 100 of STK52XX not supported!\n"); + return 1; +#endif +#if defined(CONFIG_STK52XX) + led_init(); +#endif + can_init(); + + switch (argc) { + + case 0: + case 1: + break; + + case 2: + if (strncmp (argv[1], "can", 3) == 0) { + rcode = do_can (argv); + if (rcode == 0) + printf ("OK\n"); + else + printf ("Error\n"); + return rcode; + } + break; + + case 3: + if (strncmp (argv[1], "rs232", 3) == 0) { + rcode = do_rs232 (argv); + if (rcode == 0) + printf ("OK\n"); + else + printf ("Error\n"); + return rcode; +#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) + } else if (strncmp (argv[1], "backlight", 4) == 0) { + if (strncmp (argv[2], "on", 2) == 0) { + sm501_backlight (BL_ON); + return 0; + } + else if (strncmp (argv[2], "off", 3) == 0) { + sm501_backlight (BL_OFF); + return 0; + } +#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ + } + break; + +#if defined(CONFIG_STK52XX) + case 4: + if (strcmp (argv[1], "led") == 0) { + return (do_led (argv)); + } + break; +#endif + + default: + break; + } + + printf ("Usage:\nfkt cmd [arg1] [arg2] ...\n"); + return 1; +} + + +U_BOOT_CMD( + sound , 5, 1, cmd_sound, + "Sound sub-system", + "saw [duration] [freq] [channel]\n" + " - generate sawtooth for 'duration' ms with frequency 'freq'\n" + " on left \"l\" or right \"r\" channel\n" + "sound square [duration] [freq] [channel]\n" + " - generate squarewave for 'duration' ms with frequency 'freq'\n" + " on left \"l\" or right \"r\" channel\n" + "pcm1772 reg val" +); + +U_BOOT_CMD( + wav , 3, 1, cmd_wav, + "play wav file", + "[addr] [bytes]\n" + " - play wav file at address 'addr' with length 'bytes'" +); + +U_BOOT_CMD( + beep , 2, 1, cmd_beep, + "play short beep", + "[channel]\n" + " - play short beep on \"l\"eft or \"r\"ight channel" +); +#endif /* CONFIG_STK52XX || CONFIG_FO300 */ + +#if defined(CONFIG_STK52XX) +U_BOOT_CMD( + fkt , 4, 1, cmd_fkt, + "Function test routines", + "led number on/off\n" + " - 'number's like printed on STK52XX board\n" + "fkt can\n" + " - loopback plug for X83 required\n" + "fkt rs232 number\n" + " - loopback plug(s) for X2 required" +#ifndef CONFIG_TQM5200S + "\n" + "fkt backlight on/off\n" + " - switch backlight on or off" +#endif /* !CONFIG_TQM5200S */ +); +#elif defined(CONFIG_FO300) +U_BOOT_CMD( + fkt , 3, 1, cmd_fkt, + "Function test routines", + "fkt can\n" + " - loopback plug for X16/X29 required\n" + "fkt rs232 number\n" + " - loopback plug(s) for X21/X22 required" +); +#endif +#endif |