summaryrefslogtreecommitdiffstats
path: root/u-boot/drivers/usb/host/ehci.h
diff options
context:
space:
mode:
Diffstat (limited to 'u-boot/drivers/usb/host/ehci.h')
-rw-r--r--u-boot/drivers/usb/host/ehci.h203
1 files changed, 203 insertions, 0 deletions
diff --git a/u-boot/drivers/usb/host/ehci.h b/u-boot/drivers/usb/host/ehci.h
new file mode 100644
index 0000000..945ab64
--- /dev/null
+++ b/u-boot/drivers/usb/host/ehci.h
@@ -0,0 +1,203 @@
+/*-
+ * Copyright (c) 2007-2008, Juniper Networks, Inc.
+ * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef USB_EHCI_H
+#define USB_EHCI_H
+
+#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
+#endif
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+ ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
+
+#define DeviceOutRequest \
+ ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
+
+#define InterfaceRequest \
+ ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+#define EndpointRequest \
+ ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+#define EndpointOutRequest \
+ ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+
+/*
+ * Register Space.
+ */
+struct ehci_hccr {
+ uint32_t cr_capbase;
+#define HC_LENGTH(p) (((p) >> 0) & 0x00ff)
+#define HC_VERSION(p) (((p) >> 16) & 0xffff)
+ uint32_t cr_hcsparams;
+#define HCS_PPC(p) ((p) & (1 << 4))
+#define HCS_INDICATOR(p) ((p) & (1 << 16)) /* Port indicators */
+#define HCS_N_PORTS(p) (((p) >> 0) & 0xf)
+ uint32_t cr_hccparams;
+ uint8_t cr_hcsp_portrt[8];
+} __attribute__ ((packed));
+
+struct ehci_hcor {
+ uint32_t or_usbcmd;
+#define CMD_PARK (1 << 11) /* enable "park" */
+#define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */
+#define CMD_ASE (1 << 5) /* async schedule enable */
+#define CMD_LRESET (1 << 7) /* partial reset */
+#define CMD_IAAD (1 << 5) /* "doorbell" interrupt */
+#define CMD_PSE (1 << 4) /* periodic schedule enable */
+#define CMD_RESET (1 << 1) /* reset HC not bus */
+#define CMD_RUN (1 << 0) /* start/stop HC */
+ uint32_t or_usbsts;
+#define STD_ASS (1 << 15)
+#define STS_HALT (1 << 12)
+ uint32_t or_usbintr;
+#define INTR_UE (1 << 0) /* USB interrupt enable */
+#define INTR_UEE (1 << 1) /* USB error interrupt enable */
+#define INTR_PCE (1 << 2) /* Port change detect enable */
+#define INTR_SEE (1 << 4) /* system error enable */
+#define INTR_AAE (1 << 5) /* Interrupt on async adavance enable */
+ uint32_t or_frindex;
+ uint32_t or_ctrldssegment;
+ uint32_t or_periodiclistbase;
+ uint32_t or_asynclistaddr;
+ uint32_t _reserved_[9];
+ uint32_t or_configflag;
+#define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
+ uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
+ uint32_t or_systune;
+} __attribute__ ((packed));
+
+#define USBMODE 0x68 /* USB Device mode */
+#define USBMODE_SDIS (1 << 3) /* Stream disable */
+#define USBMODE_BE (1 << 2) /* BE/LE endiannes select */
+#define USBMODE_CM_HC (3 << 0) /* host controller mode */
+#define USBMODE_CM_IDLE (0 << 0) /* idle state */
+
+/* Interface descriptor */
+struct usb_linux_interface_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bInterfaceNumber;
+ unsigned char bAlternateSetting;
+ unsigned char bNumEndpoints;
+ unsigned char bInterfaceClass;
+ unsigned char bInterfaceSubClass;
+ unsigned char bInterfaceProtocol;
+ unsigned char iInterface;
+} __attribute__ ((packed));
+
+/* Configuration descriptor information.. */
+struct usb_linux_config_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned short wTotalLength;
+ unsigned char bNumInterfaces;
+ unsigned char bConfigurationValue;
+ unsigned char iConfiguration;
+ unsigned char bmAttributes;
+ unsigned char MaxPower;
+} __attribute__ ((packed));
+
+#if defined CONFIG_EHCI_DESC_BIG_ENDIAN
+#define ehci_readl(x) (*((volatile u32 *)(x)))
+#define ehci_writel(a, b) (*((volatile u32 *)(a)) = ((volatile u32)b))
+#else
+#define ehci_readl(x) cpu_to_le32((*((volatile u32 *)(x))))
+#define ehci_writel(a, b) (*((volatile u32 *)(a)) = \
+ cpu_to_le32(((volatile u32)b)))
+#endif
+
+#if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define hc32_to_cpu(x) be32_to_cpu((x))
+#define cpu_to_hc32(x) cpu_to_be32((x))
+#else
+#define hc32_to_cpu(x) le32_to_cpu((x))
+#define cpu_to_hc32(x) cpu_to_le32((x))
+#endif
+
+#define EHCI_PS_WKOC_E (1 << 22) /* RW wake on over current */
+#define EHCI_PS_WKDSCNNT_E (1 << 21) /* RW wake on disconnect */
+#define EHCI_PS_WKCNNT_E (1 << 20) /* RW wake on connect */
+#define EHCI_PS_PO (1 << 13) /* RW port owner */
+#define EHCI_PS_PP (1 << 12) /* RW,RO port power */
+#define EHCI_PS_LS (3 << 10) /* RO line status */
+#define EHCI_PS_PR (1 << 8) /* RW port reset */
+#define EHCI_PS_SUSP (1 << 7) /* RW suspend */
+#define EHCI_PS_FPR (1 << 6) /* RW force port resume */
+#define EHCI_PS_OCC (1 << 5) /* RWC over current change */
+#define EHCI_PS_OCA (1 << 4) /* RO over current active */
+#define EHCI_PS_PEC (1 << 3) /* RWC port enable change */
+#define EHCI_PS_PE (1 << 2) /* RW port enable */
+#define EHCI_PS_CSC (1 << 1) /* RWC connect status change */
+#define EHCI_PS_CS (1 << 0) /* RO connect status */
+#define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC)
+
+#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == (1 << 10))
+
+/*
+ * Schedule Interface Space.
+ *
+ * IMPORTANT: Software must ensure that no interface data structure
+ * reachable by the EHCI host controller spans a 4K page boundary!
+ *
+ * Periodic transfers (i.e. isochronous and interrupt transfers) are
+ * not supported.
+ */
+
+/* Queue Element Transfer Descriptor (qTD). */
+struct qTD {
+ /* this part defined by EHCI spec */
+ uint32_t qt_next; /* see EHCI 3.5.1 */
+#define QT_NEXT_TERMINATE 1
+ uint32_t qt_altnext; /* see EHCI 3.5.2 */
+ uint32_t qt_token; /* see EHCI 3.5.3 */
+ uint32_t qt_buffer[5]; /* see EHCI 3.5.4 */
+ uint32_t qt_buffer_hi[5]; /* Appendix B */
+ /* pad struct for 32 byte alignment */
+ uint32_t unused[3];
+};
+
+/* Queue Head (QH). */
+struct QH {
+ uint32_t qh_link;
+#define QH_LINK_TERMINATE 1
+#define QH_LINK_TYPE_ITD 0
+#define QH_LINK_TYPE_QH 2
+#define QH_LINK_TYPE_SITD 4
+#define QH_LINK_TYPE_FSTN 6
+ uint32_t qh_endpt1;
+ uint32_t qh_endpt2;
+ uint32_t qh_curtd;
+ struct qTD qh_overlay;
+ /*
+ * Add dummy fill value to make the size of this struct
+ * aligned to 32 bytes
+ */
+ uint8_t fill[16];
+};
+
+/* Low level init functions */
+int ehci_hcd_init(void);
+int ehci_hcd_stop(void);
+
+#endif /* USB_EHCI_H */