diff options
Diffstat (limited to 'u-boot/drivers/video/mb862xx.c')
| -rw-r--r-- | u-boot/drivers/video/mb862xx.c | 478 |
1 files changed, 478 insertions, 0 deletions
diff --git a/u-boot/drivers/video/mb862xx.c b/u-boot/drivers/video/mb862xx.c new file mode 100644 index 0000000..edf34aa --- /dev/null +++ b/u-boot/drivers/video/mb862xx.c @@ -0,0 +1,478 @@ +/* + * (C) Copyright 2007 + * DENX Software Engineering, Anatolij Gustschin, agust@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * mb862xx.c - Graphic interface for Fujitsu CoralP/Lime + * PCI and video mode code was derived from smiLynxEM driver. + */ + +#include <common.h> + +#include <asm/io.h> +#include <pci.h> +#include <video_fb.h> +#include "videomodes.h" +#include <mb862xx.h> + +#if defined(CONFIG_POST) +#include <post.h> +#endif + +/* + * Graphic Device + */ +GraphicDevice mb862xx; + +/* + * 32MB external RAM - 256K Chip MMIO = 0x1FC0000 ; + */ +#define VIDEO_MEM_SIZE 0x01FC0000 + +#if defined(CONFIG_PCI) +#if defined(CONFIG_VIDEO_CORALP) + +static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_P }, + { PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_PA }, + { } +}; + +/* Internal clock frequency divider table, index is mode number */ +unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 }; +#endif +#endif + +#if defined(CONFIG_VIDEO_CORALP) +#define rd_io in32r +#define wr_io out32r +#else +#define rd_io(addr) in_be32((volatile unsigned *)(addr)) +#define wr_io(addr, val) out_be32((volatile unsigned *)(addr), (val)) +#endif + +#define HOST_RD_REG(off) rd_io((dev->frameAdrs + GC_HOST_BASE + (off))) +#define HOST_WR_REG(off, val) wr_io((dev->frameAdrs + GC_HOST_BASE + (off)), \ + (val)) +#define DISP_RD_REG(off) rd_io((dev->frameAdrs + GC_DISP_BASE + (off))) +#define DISP_WR_REG(off, val) wr_io((dev->frameAdrs + GC_DISP_BASE + (off)), \ + (val)) +#define DE_RD_REG(off) rd_io((dev->dprBase + (off))) +#define DE_WR_REG(off, val) wr_io((dev->dprBase + (off)), (val)) + +#if defined(CONFIG_VIDEO_CORALP) +#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_GEO_FIFO)), (val)) +#else +#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_FIFO)), (val)) +#endif + +#define L0PAL_WR_REG(idx, val) wr_io((dev->frameAdrs + \ + (GC_DISP_BASE | GC_L0PAL0) + \ + ((idx) << 2)), (val)) + +#if defined(CONFIG_VIDEO_MB862xx_ACCEL) +static void gdc_sw_reset (void) +{ + GraphicDevice *dev = &mb862xx; + + HOST_WR_REG (GC_SRST, 0x1); + udelay (500); + video_hw_init (); +} + + +static void de_wait (void) +{ + GraphicDevice *dev = &mb862xx; + int lc = 0x10000; + + /* + * Sync with software writes to framebuffer, + * try to reset if engine locked + */ + while (DE_RD_REG (GC_CTR) & 0x00000131) + if (lc-- < 0) { + gdc_sw_reset (); + puts ("gdc reset done after drawing engine lock.\n"); + break; + } +} + +static void de_wait_slots (int slots) +{ + GraphicDevice *dev = &mb862xx; + int lc = 0x10000; + + /* Wait for free fifo slots */ + while (DE_RD_REG (GC_IFCNT) < slots) + if (lc-- < 0) { + gdc_sw_reset (); + puts ("gdc reset done after drawing engine lock.\n"); + break; + } +} +#endif + +#if !defined(CONFIG_VIDEO_CORALP) +static void board_disp_init (void) +{ + GraphicDevice *dev = &mb862xx; + const gdc_regs *regs = board_get_regs (); + + while (regs->index) { + DISP_WR_REG (regs->index, regs->value); + regs++; + } +} +#endif + +/* + * Init drawing engine if accel enabled. + * Also clears visible framebuffer. + */ +static void de_init (void) +{ + GraphicDevice *dev = &mb862xx; +#if defined(CONFIG_VIDEO_MB862xx_ACCEL) + int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000; + + dev->dprBase = dev->frameAdrs + GC_DRAW_BASE; + + /* Setup mode and fbbase, xres, fg, bg */ + de_wait_slots (2); + DE_WR_FIFO (0xf1010108); + DE_WR_FIFO (cf | 0x0300); + DE_WR_REG (GC_FBR, 0x0); + DE_WR_REG (GC_XRES, dev->winSizeX); + DE_WR_REG (GC_FC, 0x0); + DE_WR_REG (GC_BC, 0x0); + /* Reset clipping */ + DE_WR_REG (GC_CXMIN, 0x0); + DE_WR_REG (GC_CXMAX, dev->winSizeX); + DE_WR_REG (GC_CYMIN, 0x0); + DE_WR_REG (GC_CYMAX, dev->winSizeY); + + /* Clear framebuffer using drawing engine */ + de_wait_slots (3); + DE_WR_FIFO (0x09410000); + DE_WR_FIFO (0x00000000); + DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX); + /* sync with SW access to framebuffer */ + de_wait (); +#else + unsigned int i, *p; + + i = dev->winSizeX * dev->winSizeY; + p = (unsigned int *)dev->frameAdrs; + while (i--) + *p++ = 0; +#endif +} + +#if defined(CONFIG_VIDEO_CORALP) +unsigned int pci_video_init (void) +{ + GraphicDevice *dev = &mb862xx; + pci_dev_t devbusfn; + + if ((devbusfn = pci_find_devices (supported, 0)) < 0) { + puts ("PCI video controller not found!\n"); + return 0; + } + + /* PCI setup */ + pci_write_config_dword (devbusfn, PCI_COMMAND, + (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)); + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &dev->frameAdrs); + dev->frameAdrs = pci_mem_to_phys (devbusfn, dev->frameAdrs); + + if (dev->frameAdrs == 0) { + puts ("PCI config: failed to get base address\n"); + return 0; + } + + dev->pciBase = dev->frameAdrs; + + /* Setup clocks and memory mode for Coral-P Eval. Board */ + HOST_WR_REG (GC_CCF, 0x00090000); + udelay (200); + HOST_WR_REG (GC_MMR, 0x11d7fa13); + udelay (100); + return dev->frameAdrs; +} + +unsigned int card_init (void) +{ + GraphicDevice *dev = &mb862xx; + unsigned int cf, videomode, div = 0; + unsigned long t1, hsync, vsync; + char *penv; + int tmp, i, bpp; + struct ctfb_res_modes *res_mode; + struct ctfb_res_modes var_mode; + + memset (dev, 0, sizeof (GraphicDevice)); + + if (!pci_video_init ()) + return 0; + + puts ("CoralP\n"); + + tmp = 0; + videomode = 0x310; + /* get video mode via environment */ + if ((penv = getenv ("videomode")) != NULL) { + /* decide if it is a string */ + if (penv[0] <= '9') { + videomode = (int) simple_strtoul (penv, NULL, 16); + tmp = 1; + } + } else { + tmp = 1; + } + + if (tmp) { + /* parameter are vesa modes, search params */ + for (i = 0; i < VESA_MODES_COUNT; i++) { + if (vesa_modes[i].vesanr == videomode) + break; + } + if (i == VESA_MODES_COUNT) { + printf ("\tno VESA Mode found, fallback to mode 0x%x\n", + videomode); + i = 0; + } + res_mode = (struct ctfb_res_modes *) + &res_mode_init[vesa_modes[i].resindex]; + if (vesa_modes[i].resindex > 2) { + puts ("\tUnsupported resolution, using default\n"); + bpp = vesa_modes[1].bits_per_pixel; + div = fr_div[1]; + } + bpp = vesa_modes[i].bits_per_pixel; + div = fr_div[vesa_modes[i].resindex]; + } else { + res_mode = (struct ctfb_res_modes *) &var_mode; + bpp = video_get_params (res_mode, penv); + } + + /* calculate hsync and vsync freq (info only) */ + t1 = (res_mode->left_margin + res_mode->xres + + res_mode->right_margin + res_mode->hsync_len) / 8; + t1 *= 8; + t1 *= res_mode->pixclock; + t1 /= 1000; + hsync = 1000000000L / t1; + t1 *= (res_mode->upper_margin + res_mode->yres + + res_mode->lower_margin + res_mode->vsync_len); + t1 /= 1000; + vsync = 1000000000L / t1; + + /* fill in Graphic device struct */ + sprintf (dev->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, + res_mode->yres, bpp, (hsync / 1000), (vsync / 1000)); + printf ("\t%s\n", dev->modeIdent); + dev->winSizeX = res_mode->xres; + dev->winSizeY = res_mode->yres; + dev->memSize = VIDEO_MEM_SIZE; + + switch (bpp) { + case 8: + dev->gdfIndex = GDF__8BIT_INDEX; + dev->gdfBytesPP = 1; + break; + case 15: + case 16: + dev->gdfIndex = GDF_15BIT_555RGB; + dev->gdfBytesPP = 2; + break; + default: + printf ("\t%d bpp configured, but only 8,15 and 16 supported\n", + bpp); + puts ("\tfallback to 15bpp\n"); + dev->gdfIndex = GDF_15BIT_555RGB; + dev->gdfBytesPP = 2; + } + + /* Setup dot clock (internal pll, division rate) */ + DISP_WR_REG (GC_DCM1, div); + /* L0 init */ + cf = (dev->gdfBytesPP == 1) ? 0x00000000 : 0x80000000; + DISP_WR_REG (GC_L0M, ((dev->winSizeX * dev->gdfBytesPP) / 64) << 16 | + (dev->winSizeY - 1) | cf); + DISP_WR_REG (GC_L0OA0, 0x0); + DISP_WR_REG (GC_L0DA0, 0x0); + DISP_WR_REG (GC_L0DY_L0DX, 0x0); + DISP_WR_REG (GC_L0EM, 0x0); + DISP_WR_REG (GC_L0WY_L0WX, 0x0); + DISP_WR_REG (GC_L0WH_L0WW, (dev->winSizeY - 1) << 16 | dev->winSizeX); + + /* Display timing init */ + DISP_WR_REG (GC_HTP_A, (dev->winSizeX + + res_mode->left_margin + + res_mode->right_margin + + res_mode->hsync_len - 1) << 16); + DISP_WR_REG (GC_HDB_HDP_A, (dev->winSizeX - 1) << 16 | + (dev->winSizeX - 1)); + DISP_WR_REG (GC_VSW_HSW_HSP_A, (res_mode->vsync_len - 1) << 24 | + (res_mode->hsync_len - 1) << 16 | + (dev->winSizeX + + res_mode->right_margin - 1)); + DISP_WR_REG (GC_VTR_A, (dev->winSizeY + res_mode->lower_margin + + res_mode->upper_margin + + res_mode->vsync_len - 1) << 16); + DISP_WR_REG (GC_VDP_VSP_A, (dev->winSizeY-1) << 16 | + (dev->winSizeY + + res_mode->lower_margin - 1)); + DISP_WR_REG (GC_WY_WX, 0x0); + DISP_WR_REG (GC_WH_WW, dev->winSizeY << 16 | dev->winSizeX); + /* Display enable, L0 layer */ + DISP_WR_REG (GC_DCM1, 0x80010000 | div); + + return dev->frameAdrs; +} +#endif + + +#if !defined(CONFIG_VIDEO_CORALP) +int mb862xx_probe(unsigned int addr) +{ + GraphicDevice *dev = &mb862xx; + unsigned int reg; + + dev->frameAdrs = addr; + dev->dprBase = dev->frameAdrs + GC_DRAW_BASE; + + /* Try to access GDC ID/Revision registers */ + reg = HOST_RD_REG (GC_CID); + reg = HOST_RD_REG (GC_CID); + if (reg == 0x303) { + reg = DE_RD_REG(GC_REV); + reg = DE_RD_REG(GC_REV); + if ((reg & ~0xff) == 0x20050100) + return MB862XX_TYPE_LIME; + } + + return 0; +} +#endif + +void *video_hw_init (void) +{ + GraphicDevice *dev = &mb862xx; + + puts ("Video: Fujitsu "); + + memset (dev, 0, sizeof (GraphicDevice)); + +#if defined(CONFIG_VIDEO_CORALP) + if (card_init () == 0) + return NULL; +#else + /* + * Preliminary init of the onboard graphic controller, + * retrieve base address + */ + if ((dev->frameAdrs = board_video_init ()) == 0) { + puts ("Controller not found!\n"); + return NULL; + } else { + puts ("Lime\n"); + + /* Set Change of Clock Frequency Register */ + HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF); + /* Delay required */ + udelay(300); + /* Set Memory I/F Mode Register) */ + HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR); + } +#endif + + de_init (); + +#if !defined(CONFIG_VIDEO_CORALP) + board_disp_init (); +#endif + +#if (defined(CONFIG_LWMON5) || \ + defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON) + /* Lamp on */ + board_backlight_switch (1); +#endif + + return dev; +} + +/* + * Set a RGB color in the LUT + */ +void video_set_lut (unsigned int index, unsigned char r, + unsigned char g, unsigned char b) +{ + GraphicDevice *dev = &mb862xx; + + L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b)); +} + +#if defined(CONFIG_VIDEO_MB862xx_ACCEL) +/* + * Drawing engine Fill and BitBlt screen region + */ +void video_hw_rectfill (unsigned int bpp, unsigned int dst_x, + unsigned int dst_y, unsigned int dim_x, + unsigned int dim_y, unsigned int color) +{ + GraphicDevice *dev = &mb862xx; + + de_wait_slots (3); + DE_WR_REG (GC_FC, color); + DE_WR_FIFO (0x09410000); + DE_WR_FIFO ((dst_y << 16) | dst_x); + DE_WR_FIFO ((dim_y << 16) | dim_x); + de_wait (); +} + +void video_hw_bitblt (unsigned int bpp, unsigned int src_x, + unsigned int src_y, unsigned int dst_x, + unsigned int dst_y, unsigned int width, + unsigned int height) +{ + GraphicDevice *dev = &mb862xx; + unsigned int ctrl = 0x0d000000L; + + if (src_x >= dst_x && src_y >= dst_y) + ctrl |= 0x00440000L; + else if (src_x >= dst_x && src_y <= dst_y) + ctrl |= 0x00460000L; + else if (src_x <= dst_x && src_y >= dst_y) + ctrl |= 0x00450000L; + else + ctrl |= 0x00470000L; + + de_wait_slots (4); + DE_WR_FIFO (ctrl); + DE_WR_FIFO ((src_y << 16) | src_x); + DE_WR_FIFO ((dst_y << 16) | dst_x); + DE_WR_FIFO ((height << 16) | width); + de_wait (); /* sync */ +} +#endif |