diff options
Diffstat (limited to 'u-boot/include/configs/VCMA9.h')
| -rw-r--r-- | u-boot/include/configs/VCMA9.h | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/u-boot/include/configs/VCMA9.h b/u-boot/include/configs/VCMA9.h new file mode 100644 index 0000000..ebe9e42 --- /dev/null +++ b/u-boot/include/configs/VCMA9.h @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2002, 2003 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Gary Jennejohn <garyj@denx.de> + * David Mueller <d.mueller@elsoft.ch> + * + * Configuation settings for the MPL VCMA9 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */ + +#define USE_920T_MMU 1 +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_USB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP + + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +/*********************************************************** + * I2C stuff: + * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at + * address 0x50 with 16bit addressing + ***********************************************************/ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave addr */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CONFIG_ENV_OFFSET 0x000 /* environment starts at offset 0 */ +#define CONFIG_ENV_SIZE 0x800 /* 2KB should be more than enough */ + +#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes page write mode on 24C256 */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* + * Size of malloc() pool + */ +/*#define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024)*/ + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* BUNZIP2 needs a lot of RAM */ + +/* + * Hardware drivers + */ +#define CONFIG_NET_MULTI +#define CONFIG_CS8900 /* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE 0x20000300 +#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ + +#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */ + +/* + * select serial console configuration + */ +#define CONFIG_S3C24X0_SERIAL +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on VCMA9 */ + +/************************************************************ + * USB support + ************************************************************/ +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_KEYBOARD 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 + +/* Enable needed helper functions */ +#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ + +/************************************************************ + * RTC + ************************************************************/ +#define CONFIG_RTC_S3C24X0 1 + + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 9600 + +#define CONFIG_BOOTDELAY 5 +/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ +/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.0.0.110 +#define CONFIG_SERVERIP 10.0.0.1 + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "VCMA9 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x30F80000 /* 15.5 MB in DRAM */ + +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_LOAD_ADDR 0x30800000 /* default load address */ + +/* we configure PWM Timer 4 to 1us ~ 1MHz */ +/*#define CONFIG_SYS_HZ 1000000 */ +#define CONFIG_SYS_HZ 1562500 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* support BZIP2 compression */ +#define CONFIG_BZIP2 1 + +/************************************************************ + * Ident + ************************************************************/ +/*#define VERSION_TAG "released"*/ +#define VERSION_TAG "unstable" +#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, MEV-10080-001 " VERSION_TAG + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ +#if 0 +#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ +#endif + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#ifdef CONFIG_AMD_LV800 +#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ +#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ +#endif +#ifdef CONFIG_AMD_LV400 +#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ +#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ +#endif + +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ + +#if 0 +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#endif + + +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#define MULTI_PURPOSE_SOCKET_ADDR 0x08000000 + +#endif /* __CONFIG_H */ |