diff options
Diffstat (limited to 'u-boot/include/configs/cmc_pu2.h')
| -rw-r--r-- | u-boot/include/configs/cmc_pu2.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/u-boot/include/configs/cmc_pu2.h b/u-boot/include/configs/cmc_pu2.h new file mode 100644 index 0000000..a197635 --- /dev/null +++ b/u-boot/include/configs/cmc_pu2.h @@ -0,0 +1,238 @@ +/* + * 2004-2005 Gary Jennejohn <garyj@denx.de> + * + * Configuration settings for the CMC PU2 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AT91_LEGACY + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ +#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ +#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define USE_920T_MMU 1 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 +/* flash */ +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ + +/* clocks */ +#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ + +/* sdram */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) + +#define CONFIG_BAUDRATE 9600 + +/* + * Hardware drivers + */ + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_AT91RM9200_USART +#undef CONFIG_DBGU +#define CONFIG_USART0 +#undef CONFIG_USART1 + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ + +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#define CONFIG_HARD_I2C + +#ifdef CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 0 /* not used */ +#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ +#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x32 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW +#else +#define CONFIG_TIMESTAMP +#endif +/* still about 20 kB free with this defined */ +#define CONFIG_SYS_LONGHELP + +#define CONFIG_BOOTDELAY 1 + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC + +#if defined(CONFIG_HARD_I2C) + #define CONFIG_CMD_DATE + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C +#endif + + +#define CONFIG_MISC_INIT_R +#define CONFIG_SYS_LONGHELP + +#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ +#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 + +#define CONFIG_NET_MULTI 1 +#ifdef CONFIG_NET_MULTI +#define CONFIG_DRIVER_AT91EMAC 1 +#define CONFIG_SYS_RX_ETH_BUFFER 8 +#else +#define CONFIG_DRIVER_ETHER 1 +#endif +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_AT91C_USE_RMII + +#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 +#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ + +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */ +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */ +#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */ + +#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ + +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \ + "addmtd;bootm\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \ + "addcons addmtd; bootm\0" \ + "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \ + "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \ + "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ + "${hostname}::off\0" \ + "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \ + "64k(environment),768k(linux),4096k(root),-\0" \ + "load=tftp ${loadaddr} ${loadfile}\0" \ + "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \ + "cp.b ${loadaddr} 10000000 ${filesize};" \ + "protect on 10000000 1001ffff\0" \ + "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \ + "cp.b ${loadaddr} 10030000 ${filesize}\0" \ + "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \ + "cp.b ${loadaddr} 100f0000 ${filesize}\0" \ + "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \ + "cp.b ${loadaddr} 104f0000 ${filesize}\0" \ + "cramfsimage=cramfs_cmc-pu2.img\0" \ + "jffsimage=jffs2_cmc-pu2.img\0" \ + "loadfile=u-boot_cmc-pu2.bin\0" \ + "bootfile=uImage_cmc-pu2\0" \ + "loadaddr=0x20800000\0" \ + "hostname=CMC-TC-PU2\0" \ + "bootcmd=run dhcp_start;run flash_cramfs\0" \ + "autoload=n\0" \ + "dhcp_start=echo no DHCP\0" \ + "ipaddr=192.168.0.190\0" +#endif /* __CONFIG_H */ |