diff options
Diffstat (limited to 'u-boot/include/configs/suen3.h')
| -rw-r--r-- | u-boot/include/configs/suen3.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/u-boot/include/configs/suen3.h b/u-boot/include/configs/suen3.h new file mode 100644 index 0000000..b2730a3 --- /dev/null +++ b/u-boot/include/configs/suen3.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* + * for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html + */ + +#ifndef _CONFIG_SUEN3_H +#define _CONFIG_SUEN3_H + +/* include common defines/options for all arm based Keymile boards */ +#include "km_arm.h" + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nKeymile SUEN3" + +#define CONFIG_HOSTNAME suen3 + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ +#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 +#define CONFIG_ENV_EEPROM_IS_ON_I2C 1 +#define CONFIG_SYS_EEPROM_WREN 1 +#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) +#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" + +/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_CMD_SF + +#define CONFIG_SPI_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_KIRKWOOD_SPI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */ + +#define FLASH_GPIO_PIN 0x00010000 + +#define MTDIDS_DEFAULT "nand0=orion_nand" +/* test-only: partitioning needs some tuning, this is just for tests */ +#define MTDPARTS_DEFAULT "mtdparts=" \ + "orion_nand:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + +#define CONFIG_KM_DEF_ENV_UPDATE \ + "update=" \ + "spi on;sf probe 0;sf erase 0 50000;" \ + "sf write ${u-boot_addr_r} 0 ${filesize};" \ + "spi off\0" + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "memsize=0x8000000\0" \ + "newenv=setenv addr 0x100000 && " \ + "i2c dev 1; mw.b ${addr} 0 4 && " \ + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ + "rootpath=/opt/eldk/arm\0" \ + "EEprom_ivm=pca9544a:70:9\0" \ + "" + +#endif /* _CONFIG_SUEN3_H */ |