diff options
Diffstat (limited to 'u-boot/include/configs/trab.h')
| -rw-r--r-- | u-boot/include/configs/trab.h | 419 |
1 files changed, 419 insertions, 0 deletions
diff --git a/u-boot/include/configs/trab.h b/u-boot/include/configs/trab.h new file mode 100644 index 0000000..d5736a2 --- /dev/null +++ b/u-boot/include/configs/trab.h @@ -0,0 +1,419 @@ +/* + * (C) Copyright 2002-2005 + * Gary Jennejohn <garyj@denx.de> + * + * Configuation settings for the TRAB board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Default configuration is with 8 MB Flash, 32 MB RAM + */ +#if (!defined(CONFIG_FLASH_8MB)) && (!defined(CONFIG_FLASH_16MB)) +# define CONFIG_FLASH_8MB /* 8 MB Flash */ +#endif +#if (!defined(CONFIG_RAM_16MB)) && (!defined(CONFIG_RAM_32MB)) +# define CONFIG_RAM_32MB /* 32 MB SDRAM */ +#endif + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_TRAB 1 /* on a TRAB Board */ +#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ + +/* automatic software updates (see board/trab/auto_update.c) */ +#define CONFIG_AUTO_UPDATE 1 + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 12000000 /* TRAB has 12 MHz input clock */ + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ + +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*********************************************************** + * I2C stuff: + * the TRAB is equipped with an ATMEL 24C04 EEPROM at + * address 0x54 with 8bit addressing + ***********************************************************/ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave addr */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 /* EEPROM address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 1 address byte */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 bytes page write mode on 24C04 */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* USB stuff */ +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 + +#undef CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 + +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x14200000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c2400" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) + +/* + * Hardware drivers + */ +#define CONFIG_NET_MULTI +#define CONFIG_CS8900 /* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */ +#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ + +#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */ + +#define CONFIG_VFD 1 /* VFD linear frame buffer driver */ +#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */ + +/* + * select serial console configuration + */ +#define CONFIG_S3C24X0_SERIAL +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */ + +#define CONFIG_HWFLOW /* include RTS/CTS flow control support */ + +#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */ + +#define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */ + +/* + * The following enables modem debugging stuff. The dbg() and + * 'char screen[1024]' are used for debug printfs. Unfortunately, + * it is usable only from BDI + */ +#undef CONFIG_MODEM_SUPPORT_DEBUG + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* Use s3c2400's RTC */ +#define CONFIG_RTC_S3C24X0 1 + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#ifdef CONFIG_HWFLOW + #define CONFIG_CMD_HWFLOW +#endif + +#ifdef CONFIG_VFD + #define CONFIG_CMD_VFD +#endif + +#ifdef CONFIG_DRIVER_S3C24X0_I2C + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C +#endif + +#ifndef USE_920T_MMU + #undef CONFIG_CMD_CACHE +#endif + + +/* moved up */ +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ +#define CONFIG_PREBOOT "echo;echo *** booting ***;echo" +#define CONFIG_BOOTARGS "console=ttyS0" +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.3.68 +#define CONFIG_HOSTNAME trab +#define CONFIG_SERVERIP 192.168.3.1 +#define CONFIG_BOOTCOMMAND "burn_in" + +#ifndef CONFIG_FLASH_8MB /* current config: 16 MB flash */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfs_args=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath\0" \ + "rootpath=/opt/eldk/arm_920TDI\0" \ + "ram_args=setenv bootargs root=/dev/ram rw\0" \ + "add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \ + "u-boot=/tftpboot/TRAB/u-boot.bin\0" \ + "load=tftp C100000 ${u-boot}\0" \ + "update=protect off 0 5FFFF;era 0 5FFFF;" \ + "cp.b C100000 0 $filesize\0" \ + "loadfile=/tftpboot/TRAB/uImage\0" \ + "loadaddr=c400000\0" \ + "net_load=tftpboot $loadaddr $loadfile\0" \ + "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \ + "kernel_addr=00060000\0" \ + "flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \ + "mdm_init1=ATZ\0" \ + "mdm_init2=ATS0=1\0" \ + "mdm_flow_control=rts/cts\0" +#else /* !CONFIG_SYS_HUSH_PARSER */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfs_args=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "rootpath=/opt/eldk/arm_920TDI\0" \ + "ram_args=setenv bootargs root=/dev/ram rw\0" \ + "add_net=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ + "add_misc=setenv bootargs ${bootargs} console=ttyS0 panic=1\0" \ + "u-boot=/tftpboot/TRAB/u-boot.bin\0" \ + "load=tftp C100000 ${u-boot}\0" \ + "update=protect off 0 5FFFF;era 0 5FFFF;" \ + "cp.b C100000 0 ${filesize}\0" \ + "loadfile=/tftpboot/TRAB/uImage\0" \ + "loadaddr=c400000\0" \ + "net_load=tftpboot ${loadaddr} ${loadfile}\0" \ + "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \ + "kernel_addr=000C0000\0" \ + "flash_nfs=run nfs_args add_net add_misc;bootm ${kernel_addr}\0" \ + "mdm_init1=ATZ\0" \ + "mdm_init2=ATS0=1\0" \ + "mdm_flow_control=rts/cts\0" +#endif /* CONFIG_SYS_HUSH_PARSER */ +#else /* CONFIG_FLASH_8MB => 8 MB flash */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfs_args=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath\0" \ + "rootpath=/opt/eldk/arm_920TDI\0" \ + "ram_args=setenv bootargs root=/dev/ram rw\0" \ + "add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \ + "u-boot=/tftpboot/TRAB/u-boot.bin\0" \ + "load=tftp C100000 ${u-boot}\0" \ + "update=protect off 0 3FFFF;era 0 3FFFF;" \ + "cp.b C100000 0 $filesize;" \ + "setenv filesize;saveenv\0" \ + "loadfile=/tftpboot/TRAB/uImage\0" \ + "loadaddr=C400000\0" \ + "net_load=tftpboot $loadaddr $loadfile\0" \ + "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \ + "kernel_addr=000C0000\0" \ + "flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \ + "mdm_init1=ATZ\0" \ + "mdm_init2=ATS0=1\0" \ + "mdm_flow_control=rts/cts\0" +#else /* !CONFIG_SYS_HUSH_PARSER */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfs_args=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "rootpath=/opt/eldk/arm_920TDI\0" \ + "ram_args=setenv bootargs root=/dev/ram rw\0" \ + "add_net=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ + "add_misc=setenv bootargs ${bootargs} console=ttyS0 panic=1\0" \ + "u-boot=/tftpboot/TRAB/u-boot.bin\0" \ + "load=tftp C100000 ${u-boot}\0" \ + "update=protect off 0 3FFFF;era 0 3FFFF;" \ + "cp.b C100000 0 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "loadfile=/tftpboot/TRAB/uImage\0" \ + "loadaddr=C400000\0" \ + "net_load=tftpboot ${loadaddr} ${loadfile}\0" \ + "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \ + "kernel_addr=000C0000\0" \ + "flash_nfs=run nfs_args add_net add_misc;bootm ${kernel_addr}\0" \ + "mdm_init1=ATZ\0" \ + "mdm_init2=ATS0=1\0" \ + "mdm_flow_control=rts/cts\0" +#endif /* CONFIG_SYS_HUSH_PARSER */ +#endif /* CONFIG_FLASH_8MB */ + +#if 1 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "TRAB # " /* Monitor Command Prompt */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x0C000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0D000000 /* 16 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x0CF00000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_MISC_INIT_R /* have misc_init_r() function */ + +/*----------------------------------------------------------------------- + * burn-in test stuff. + * + * BURN_IN_CYCLE_DELAY defines the seconds to wait between each burn-in cycle + * Because the burn-in test itself causes also an delay of about 4 seconds, + * this time must be subtracted from the desired overall burn-in cycle time. + */ +#define BURN_IN_CYCLE_DELAY 296 /* seconds between burn-in cycles */ + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x0C000000 /* SDRAM Bank #1 */ +#ifndef CONFIG_RAM_16MB +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ +#else +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ +#endif + +#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ + +/* The following #defines are needed to get flash environment right */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=0" + +/* production flash layout */ +#define MTDPARTS_DEFAULT "mtdparts=0:16k(Firmware1)ro," \ + "16k(Env1)," \ + "16k(Env2)," \ + "336k(Firmware2)ro," \ + "896k(Kernel)," \ + "5376k(Root-FS)," \ + "1408k(JFFS2)," \ + "-(VFD)" + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#ifndef CONFIG_FLASH_8MB +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#else +#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ +#endif + +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (15*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ + +#define CONFIG_ENV_IS_IN_FLASH 1 + +/* Address and size of Primary Environment Sector */ +#ifndef CONFIG_FLASH_8MB +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_SECT_SIZE 0x4000 +#endif + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ + +/* Initial value of the on-board touch screen brightness */ +#define CONFIG_SYS_BRIGHTNESS 0x20 + +#endif /* __CONFIG_H */ |