diff options
Diffstat (limited to 'u-boot/include/netdev.h')
| -rw-r--r-- | u-boot/include/netdev.h | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/u-boot/include/netdev.h b/u-boot/include/netdev.h new file mode 100644 index 0000000..6f0a971 --- /dev/null +++ b/u-boot/include/netdev.h @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2008 + * Benjamin Warren, biggerbadderben@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * netdev.h - definitions an prototypes for network devices + */ + +#ifndef _NETDEV_H_ +#define _NETDEV_H_ + +/* + * Board and CPU-specific initialization functions + * board_eth_init() has highest priority. cpu_eth_init() only + * gets called if board_eth_init() isn't instantiated or fails. + * Return values: + * 0: success + * -1: failure + */ + +int board_eth_init(bd_t *bis); +int cpu_eth_init(bd_t *bis); + +/* Driver initialization prototypes */ +int altera_tse_initialize(u8 dev_num, int mac_base, + int sgdma_rx_base, int sgdma_tx_base); +int ax88180_initialize(bd_t *bis); +int au1x00_enet_initialize(bd_t*); +int at91emac_register(bd_t *bis, unsigned long iobase); +int bfin_EMAC_initialize(bd_t *bis); +int cs8900_initialize(u8 dev_num, int base_addr); +int dc21x4x_initialize(bd_t *bis); +int davinci_emac_initialize(void); +int designware_initialize(u32 id, ulong base_addr, u32 phy_addr); +int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); +int e1000_initialize(bd_t *bis); +int eepro100_initialize(bd_t *bis); +int enc28j60_initialize(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode); +int ep93xx_eth_initialize(u8 dev_num, int base_addr); +int ethoc_initialize(u8 dev_num, int base_addr); +int eth_3com_initialize (bd_t * bis); +int fec_initialize (bd_t *bis); +int fecmxc_initialize (bd_t *bis); +int ftgmac100_initialize(bd_t *bits); +int ftmac100_initialize(bd_t *bits); +int greth_initialize(bd_t *bis); +void gt6426x_eth_initialize(bd_t *bis); +int inca_switch_initialize(bd_t *bis); +int lan91c96_initialize(u8 dev_num, int base_addr); +int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); +int mcdmafec_initialize(bd_t *bis); +int mcffec_initialize(bd_t *bis); +int mpc512x_fec_initialize(bd_t *bis); +int mpc5xxx_fec_initialize(bd_t *bis); +int mpc8220_fec_initialize(bd_t *bis); +int mpc82xx_scc_enet_initialize(bd_t *bis); +int mvgbe_initialize(bd_t *bis); +int natsemi_initialize(bd_t *bis); +int npe_initialize(bd_t *bis); +int ns8382x_initialize(bd_t *bis); +int pcnet_initialize(bd_t *bis); +int plb2800_eth_initialize(bd_t *bis); +int ppc_4xx_eth_initialize (bd_t *bis); +int rtl8139_initialize(bd_t *bis); +int rtl8169_initialize(bd_t *bis); +int scc_initialize(bd_t *bis); +int skge_initialize(bd_t *bis); +int smc911x_initialize(u8 dev_num, int base_addr); +int smc91111_initialize(u8 dev_num, int base_addr); +int tsi108_eth_initialize(bd_t *bis); +int uec_standard_init(bd_t *bis); +int uli526x_initialize(bd_t *bis); +int xilinx_emaclite_initialize (bd_t *bis, int base_addr); +int sh_eth_initialize(bd_t *bis); +int dm9000_initialize(bd_t *bis); +int fecmxc_initialize(bd_t *bis); + +/* Boards with PCI network controllers can call this from their board_eth_init() + * function to initialize whatever's on board. + * Return value is total # of devices found */ + +static inline int pci_eth_init(bd_t *bis) +{ + int num = 0; + +#ifdef CONFIG_PCI + +#ifdef CONFIG_EEPRO100 + num += eepro100_initialize(bis); +#endif +#ifdef CONFIG_TULIP + num += dc21x4x_initialize(bis); +#endif +#ifdef CONFIG_E1000 + num += e1000_initialize(bis); +#endif +#ifdef CONFIG_PCNET + num += pcnet_initialize(bis); +#endif +#ifdef CONFIG_NATSEMI + num += natsemi_initialize(bis); +#endif +#ifdef CONFIG_NS8382X + num += ns8382x_initialize(bis); +#endif +#if defined(CONFIG_RTL8139) + num += rtl8139_initialize(bis); +#endif +#if defined(CONFIG_RTL8169) + num += rtl8169_initialize(bis); +#endif +#if defined(CONFIG_ULI526X) + num += uli526x_initialize(bis); +#endif + +#endif /* CONFIG_PCI */ + return num; +} + +/* + * Boards with mv88e61xx switch can use this by defining + * CONFIG_MV88E61XX_SWITCH in respective board configheader file + * the stuct and enums here are used to specify switch configuration params + */ +#if defined(CONFIG_MV88E61XX_SWITCH) +enum mv88e61xx_cfg_vlan { + MV88E61XX_VLANCFG_DEFAULT, + MV88E61XX_VLANCFG_ROUTER +}; + +enum mv88e61xx_cfg_mdip { + MV88E61XX_MDIP_NOCHANGE, + MV88E61XX_MDIP_REVERSE +}; + +enum mv88e61xx_cfg_ledinit { + MV88E61XX_LED_INIT_DIS, + MV88E61XX_LED_INIT_EN +}; + +enum mv88e61xx_cfg_rgmiid { + MV88E61XX_RGMII_DELAY_DIS, + MV88E61XX_RGMII_DELAY_EN +}; + +enum mv88e61xx_cfg_prtstt { + MV88E61XX_PORTSTT_DISABLED, + MV88E61XX_PORTSTT_BLOCKING, + MV88E61XX_PORTSTT_LEARNING, + MV88E61XX_PORTSTT_FORWARDING +}; + +struct mv88e61xx_config { + char *name; + enum mv88e61xx_cfg_vlan vlancfg; + enum mv88e61xx_cfg_rgmiid rgmii_delay; + enum mv88e61xx_cfg_prtstt portstate; + enum mv88e61xx_cfg_ledinit led_init; + enum mv88e61xx_cfg_mdip mdip; + u32 ports_enabled; + u8 cpuport; +}; + +int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); +#endif /* CONFIG_MV88E61XX_SWITCH */ + +#endif /* _NETDEV_H_ */ |