1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
|
/*
* Memory Setup stuff - taken from blob memsetup.S
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
*
* Modified for the Samsung development board by
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
/* some parameters for the board */
/*
*
* Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
*
* Copyright (C) 2001 Samsung Electronics by chc, 010406
*
* S3C2400 specific tweaks.
*
*/
/* memory controller */
#define BWSCON 0x14000000
#define BANKCON3 0x14000010 /* for cs8900, ethernet */
/* Bank0 */
#define B0_Tacs 0x0 /* 0 clk */
#define B0_Tcos 0x0 /* 0 clk */
#define B0_Tacc 0x7 /* 14 clk */
#define B0_Tcoh 0x0 /* 0 clk */
#define B0_Tah 0x0 /* 0 clk */
#define B0_Tacp 0x0
#define B0_PMC 0x0 /* normal */
/* Bank1 */
#define B1_Tacs 0x0 /* 0 clk */
#define B1_Tcos 0x0 /* 0 clk */
#define B1_Tacc 0x7 /* 14 clk */
#define B1_Tcoh 0x0 /* 0 clk */
#define B1_Tah 0x0 /* 0 clk */
#define B1_Tacp 0x0
#define B1_PMC 0x0 /* normal */
/* Bank2 */
#define B2_Tacs 0x0 /* 0 clk */
#define B2_Tcos 0x0 /* 0 clk */
#define B2_Tacc 0x7 /* 14 clk */
#define B2_Tcoh 0x0 /* 0 clk */
#define B2_Tah 0x0 /* 0 clk */
#define B2_Tacp 0x0
#define B2_PMC 0x0 /* normal */
/* Bank3 - setup for the cs8900 */
#define B3_Tacs 0x0 /* 0 clk */
#define B3_Tcos 0x3 /* 4 clk */
#define B3_Tacc 0x7 /* 14 clk */
#define B3_Tcoh 0x1 /* 1 clk */
#define B3_Tah 0x0 /* 0 clk */
#define B3_Tacp 0x3 /* 6 clk */
#define B3_PMC 0x0 /* normal */
/* Bank4 */
#define B4_Tacs 0x0 /* 0 clk */
#define B4_Tcos 0x0 /* 0 clk */
#define B4_Tacc 0x7 /* 14 clk */
#define B4_Tcoh 0x0 /* 0 clk */
#define B4_Tah 0x0 /* 0 clk */
#define B4_Tacp 0x0
#define B4_PMC 0x0 /* normal */
/* Bank5 */
#define B5_Tacs 0x0 /* 0 clk */
#define B5_Tcos 0x0 /* 0 clk */
#define B5_Tacc 0x7 /* 14 clk */
#define B5_Tcoh 0x0 /* 0 clk */
#define B5_Tah 0x0 /* 0 clk */
#define B5_Tacp 0x0
#define B5_PMC 0x0 /* normal */
/* Bank6 */
#define B6_MT 0x3 /* SDRAM */
#define B6_Trcd 0x1 /* 3clk */
#define B6_SCAN 0x1 /* 9 bit */
/* Bank7 */
#define B7_MT 0x3 /* SDRAM */
#define B7_Trcd 0x1 /* 3clk */
#define B7_SCAN 0x1 /* 9 bit */
/* refresh parameter */
#define REFEN 0x1 /* enable refresh */
#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
#define Trp 0x0 /* 2 clk */
#define Trc 0x3 /* 7 clk */
#define Tchr 0x2 /* 3 clk */
#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
/* memory control configuration */
/* make r0 relative the current location so that it */
/* reads SMRDATA out of FLASH rather than memory ! */
ldr r0, =SMRDATA
ldr r1, _TEXT_BASE
sub r0, r0, r1
ldr r1, =BWSCON /* Bus Width Status Controller */
add r2, r0, #52
0:
ldr r3, [r0], #4
str r3, [r1], #4
cmp r2, r0
bne 0b
/* everything is fine now */
mov pc, lr
.ltorg
/* the literal pools origin */
SMRDATA:
.word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */
.word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
.word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
.word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
.word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
.word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
.word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
.word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
.word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
.word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
.word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
.word 0x30 /* MRSR6, CL=3clk */
.word 0x30 /* MRSR7 */
|
