diff options
Diffstat (limited to 'board/omap3evm')
| -rw-r--r-- | board/omap3evm/Makefile | 51 | ||||
| -rw-r--r-- | board/omap3evm/config.mk | 19 | ||||
| -rw-r--r-- | board/omap3evm/omap3evm.c | 814 | ||||
| -rw-r--r-- | board/omap3evm/platform.S | 435 | ||||
| -rw-r--r-- | board/omap3evm/x-load.lds | 54 |
5 files changed, 0 insertions, 1373 deletions
diff --git a/board/omap3evm/Makefile b/board/omap3evm/Makefile deleted file mode 100644 index d83f45e..0000000 --- a/board/omap3evm/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := omap3evm.o -SOBJS := platform.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/omap3evm/config.mk b/board/omap3evm/config.mk deleted file mode 100644 index a45ec22..0000000 --- a/board/omap3evm/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# (C) Copyright 2006 -# Texas Instruments, <www.ti.com> -# -# OMAP3EVM board uses OMAP3430 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments# -# -# OMAP3EVM has 1 bank of 128MB mPOP-SDRAM on CS0 -# Physical Address: -# 8000'0000 (bank0) - -# For use if you want X-Loader to relocate from SRAM to DDR -#TEXT_BASE = 0x80e80000 - -# For XIP in 64K of SRAM or debug (GP device has it all availabe) -# SRAM 40200000-4020FFFF base -# initial stack at 0x4020fffc used in s_init (below xloader). -# The run time stack is (above xloader, 2k below) -# If any globals exist there needs to be room for them also -TEXT_BASE = 0x40200800 diff --git a/board/omap3evm/omap3evm.c b/board/omap3evm/omap3evm.c deleted file mode 100644 index 16c1f70..0000000 --- a/board/omap3evm/omap3evm.c +++ /dev/null @@ -1,814 +0,0 @@ -/* - * (C) Copyright 2006 - * Texas Instruments, <www.ti.com> - * Jian Zhang <jzhang@ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <command.h> -#include <part.h> -#include <fat.h> -#include <asm/arch/cpu.h> -#include <asm/arch/bits.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> -#include <asm/arch/clocks.h> -#include <asm/arch/mem.h> - -/* Used to index into DPLL parameter tables */ -struct dpll_param { - unsigned int m; - unsigned int n; - unsigned int fsel; - unsigned int m2; -}; - -typedef struct dpll_param dpll_param; - -/* Following functions are exported from lowlevel_init.S */ -extern dpll_param * get_mpu_dpll_param(); -extern dpll_param * get_iva_dpll_param(); -extern dpll_param * get_core_dpll_param(); -extern dpll_param * get_per_dpll_param(); - -#define __raw_readl(a) (*(volatile unsigned int *)(a)) -#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) -#define __raw_readw(a) (*(volatile unsigned short *)(a)) -#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -void udelay (unsigned long usecs) { - delay(usecs); -} - -/***************************************** - * Routine: board_init - * Description: Early hardware init. - *****************************************/ -int board_init (void) -{ - return 0; -} - -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - int mode; - mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); - return(mode >>= 8); -} - -/************************************************ - * get_sysboot_value(void) - return SYS_BOOT[4:0] - ************************************************/ -u32 get_sysboot_value(void) -{ - int mode; - mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); - return mode; -} -/************************************************************* - * Routine: get_mem_type(void) - returns the kind of memory connected - * to GPMC that we are trying to boot form. Uses SYS BOOT settings. - *************************************************************/ -u32 get_mem_type(void) -{ - u32 mem_type = get_sysboot_value(); - switch (mem_type){ - case 0: - case 2: - case 4: - case 16: - case 22: return GPMC_ONENAND; - - case 1: - case 12: - case 15: - case 21: - case 27: return GPMC_NAND; - - case 3: - case 6: return MMC_ONENAND; - - case 8: - case 11: - case 14: - case 20: - case 26: return GPMC_MDOC; - - case 17: - case 18: - case 24: return MMC_NAND; - - case 7: - case 10: - case 13: - case 19: - case 25: - default: return GPMC_NOR; - } -} - -/****************************************** - * get_cpu_rev(void) - extract version info - ******************************************/ -u32 get_cpu_rev(void) -{ - u32 cpuid=0; - /* On ES1.0 the IDCODE register is not exposed on L4 - * so using CPU ID to differentiate - * between ES2.0 and ES1.0. - */ - __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); - if((cpuid & 0xf) == 0x0) - return CPU_3430_ES1; - else - return CPU_3430_ES2; - -} - -/****************************************** - * cpu_is_3410(void) - returns true for 3410 - ******************************************/ -u32 cpu_is_3410(void) -{ - int status; - if(get_cpu_rev() < CPU_3430_ES2) { - return 0; - } else { - /* read scalability status and return 1 for 3410*/ - status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); - /* Check whether MPU frequency is set to 266 MHz which - * is nominal for 3410. If yes return true else false - */ - if (((status >> 8) & 0x3) == 0x2) - return 1; - else - return 0; - } -} - -/***************************************************************** - * sr32 - clear & set a value in a bit range for a 32 bit address - *****************************************************************/ -void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) -{ - u32 tmp, msk = 0; - msk = 1 << num_bits; - --msk; - tmp = __raw_readl(addr) & ~(msk << start_bit); - tmp |= value << start_bit; - __raw_writel(tmp, addr); -} - -/********************************************************************* - * wait_on_value() - common routine to allow waiting for changes in - * volatile regs. - *********************************************************************/ -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) -{ - u32 i = 0, val; - do { - ++i; - val = __raw_readl(read_addr) & read_bit_mask; - if (val == match_value) - return (1); - if (i == bound) - return (0); - } while (1); -} - -#ifdef CFG_3430SDRAM_DDR -/********************************************************************* - * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. - *********************************************************************/ -void config_3430sdram_ddr(void) -{ - /* reset sdrc controller */ - __raw_writel(SOFTRESET, SDRC_SYSCONFIG); - wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); - __raw_writel(0, SDRC_SYSCONFIG); - - /* setup sdrc to ball mux */ - __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); - - /* set mdcfg */ - __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); - - /* set timing */ - if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)){ - __raw_writel(INFINEON_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); - __raw_writel(INFINEON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); - } - if ((get_mem_type() == GPMC_NAND) ||(get_mem_type() == MMC_NAND)){ - __raw_writel(MICRON_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); - __raw_writel(MICRON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); - } - - __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); - __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); - - /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ - __raw_writel(CMD_NOP, SDRC_MANUAL_0); - delay(5000); - __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); - __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); - - /* set mr0 */ - __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); - - /* set up dll */ - __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); - delay(0x2000); /* give time to lock */ - -} -#endif // CFG_3430SDRAM_DDR - -/************************************************************* - * get_sys_clk_speed - determine reference oscillator speed - * based on known 32kHz clock and gptimer. - *************************************************************/ -u32 get_osc_clk_speed(void) -{ - u32 start, cstart, cend, cdiff, val; - - val = __raw_readl(PRM_CLKSRC_CTRL); - /* If SYS_CLK is being divided by 2, remove for now */ - val = (val & (~BIT7)) | BIT6; - __raw_writel(val, PRM_CLKSRC_CTRL); - - /* enable timer2 */ - val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; - __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ - - /* Enable I and F Clocks for GPT1 */ - val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; - __raw_writel(val, CM_ICLKEN_WKUP); - val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; - __raw_writel(val, CM_FCLKEN_WKUP); - - __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ - __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ - /* enable 32kHz source *//* enabled out of reset */ - /* determine sys_clk via gauging */ - - start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ - while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ - cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ - while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ - cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ - cdiff = cend - cstart; /* get elapsed ticks */ - - /* based on number of ticks assign speed */ - if (cdiff > 19000) - return (S38_4M); - else if (cdiff > 15200) - return (S26M); - else if (cdiff > 13000) - return (S24M); - else if (cdiff > 9000) - return (S19_2M); - else if (cdiff > 7600) - return (S13M); - else - return (S12M); -} - -/****************************************************************************** - * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on - * -- input oscillator clock frequency. - * - *****************************************************************************/ -void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) -{ - if(osc_clk == S38_4M) - *sys_clkin_sel= 4; - else if(osc_clk == S26M) - *sys_clkin_sel = 3; - else if(osc_clk == S19_2M) - *sys_clkin_sel = 2; - else if(osc_clk == S13M) - *sys_clkin_sel = 1; - else if(osc_clk == S12M) - *sys_clkin_sel = 0; -} - -/****************************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * -- called from SRAM, or Flash (using temp SRAM stack). - *****************************************************************************/ -void prcm_init(void) -{ - u32 osc_clk=0, sys_clkin_sel; - dpll_param *dpll_param_p; - u32 clk_index, sil_index; - - /* Gauge the input clock speed and find out the sys_clkin_sel - * value corresponding to the input clock. - */ - osc_clk = get_osc_clk_speed(); - get_sys_clkin_sel(osc_clk, &sys_clkin_sel); - - sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ - - /* If the input clock is greater than 19.2M always divide/2 */ - if(sys_clkin_sel > 2) { - sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ - clk_index = sys_clkin_sel/2; - } else { - sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ - clk_index = sys_clkin_sel; - } - - /* The DPLL tables are defined according to sysclk value and - * silicon revision. The clk_index value will be used to get - * the values for that input sysclk from the DPLL param table - * and sil_index will get the values for that SysClk for the - * appropriate silicon rev. - */ - sil_index = get_cpu_rev() - 1; - - /* Unlock MPU DPLL (slows things down, and needed later) */ - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); - wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); - - /* Getting the base address of Core DPLL param table*/ - dpll_param_p = (dpll_param *)get_core_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + 2*clk_index + sil_index; - /* CORE DPLL */ - /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ - sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); - wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); - sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ - sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ - sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ - sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ - sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ - sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ - sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ - sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ - sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ - sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ - sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ - sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); - - /* Getting the base address to PER DPLL param table*/ - dpll_param_p = (dpll_param *)get_per_dpll_param(); - /* Moving it to the right sysclk base */ - dpll_param_p = dpll_param_p + clk_index; - /* PER DPLL */ - sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); - wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); - sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ - sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ - sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ - sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ - sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ - sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ - sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ - sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ - sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); - - /* Getting the base address to MPU DPLL param table*/ - dpll_param_p = (dpll_param *)get_mpu_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + 2*clk_index + sil_index; - /* MPU DPLL (unlocked already) */ - sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ - sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ - sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ - sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); - - /* Getting the base address to IVA DPLL param table*/ - dpll_param_p = (dpll_param *)get_iva_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + 2*clk_index + sil_index; - /* IVA DPLL (set to 12*20=240MHz) */ - sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); - wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); - sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ - sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ - sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ - sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ - wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); - - /* Set up GPTimers to sys_clk source only */ - sr32(CM_CLKSEL_PER, 0, 8, 0xff); - sr32(CM_CLKSEL_WKUP, 0, 1, 1); - - delay(5000); -} - -/***************************************** - * Routine: secure_unlock - * Description: Setup security registers for access - * (GP Device only) - *****************************************/ -void secure_unlock(void) -{ - /* Permission values for registers -Full fledged permissions to all */ - #define UNLOCK_1 0xFFFFFFFF - #define UNLOCK_2 0x00000000 - #define UNLOCK_3 0x0000FFFF - /* Protection Module Register Target APE (PM_RT)*/ - __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); - __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); - __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); - __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); - - __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); - - __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); - __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); - - /* IVA Changes */ - __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); - __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); - __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); - - __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ -} - -/********************************************************** - * Routine: try_unlock_sram() - * Description: If chip is GP type, unlock the SRAM for - * general use. - ***********************************************************/ -void try_unlock_memory(void) -{ - int mode; - - /* if GP device unlock device SRAM for general use */ - /* secure code breaks for Secure/Emulation device - HS/E/T*/ - mode = get_device_type(); - if (mode == GP_DEVICE) { - secure_unlock(); - } - return; -} - -/********************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called at time when only stack is available. - **********************************************************/ - -void s_init(void) -{ - watchdog_init(); -#ifdef CONFIG_3430_AS_3410 - /* setup the scalability control register for - * 3430 to work in 3410 mode - */ - __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); -#endif - try_unlock_memory(); - set_muxconf_regs(); - delay(100); - prcm_init(); - per_clocks_enable(); - config_3430sdram_ddr(); -} - -/******************************************************* - * Routine: misc_init_r - * Description: Init ethernet (done here so udelay works) - ********************************************************/ -int misc_init_r (void) -{ - return(0); -} - -/****************************************************** - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - ******************************************************/ -void wait_for_command_complete(unsigned int wd_base) -{ - int pending = 1; - do { - pending = __raw_readl(wd_base + WWPS); - } while (pending); -} - -/**************************************** - * Routine: watchdog_init - * Description: Shut down watch dogs - *****************************************/ -void watchdog_init(void) -{ - /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is - * either taken care of by ROM (HS/EMU) or not accessible (GP). - * We need to take care of WD2-MPU or take a PRCM reset. WD3 - * should not be running and does not generate a PRCM reset. - */ - sr32(CM_FCLKEN_WKUP, 5, 1, 1); - sr32(CM_ICLKEN_WKUP, 5, 1, 1); - wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ - - __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); - wait_for_command_complete(WD2_BASE); - __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); -} - -/********************************************** - * Routine: dram_init - * Description: sets uboots idea of sdram size - **********************************************/ -int dram_init (void) -{ - return 0; -} - -/***************************************************************** - * Routine: peripheral_enable - * Description: Enable the clks & power for perifs (GPT2, UART1,...) - ******************************************************************/ -void per_clocks_enable(void) -{ - /* Enable GP2 timer. */ - sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ - sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ - sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ - -#ifdef CFG_NS16550 - /* Enable UART1 clocks */ - sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); - sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); -#endif - delay(1000); -} - -/* Set MUX for UART, GPMC, SDRC, GPIO */ - -#define MUX_VAL(OFFSET,VALUE)\ - __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); - -#define CP(x) (CONTROL_PADCONF_##x) -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_DEFAULT()\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ - MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ - MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ - MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ - MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ - MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ - MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ - MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ - MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ - MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ - MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ - MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ - MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ - MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ - MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ - MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ - MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ - MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ - MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ - MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ - MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ - MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ - MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ - MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ - -/********************************************************** - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers - * specific to the hardware. Many pins need - * to be moved from protect to primary mode. - *********************************************************/ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -} - -/********************************************************** - * Routine: nand+_init - * Description: Set up nand for nand and jffs2 commands - *********************************************************/ - -int nand_init(void) -{ - /* global settings */ - __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ - __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ - __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ - - /* Set the GPMC Vals . For NAND boot on 3430SDP, NAND is mapped at CS0 - * , NOR at CS1 and MPDB at CS3. And oneNAND boot, we map oneNAND at CS0. - * We configure only GPMC CS0 with required values. Configiring other devices - * at other CS in done in u-boot anyway. So we don't have to bother doing it here. - */ - __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); - delay(1000); - - if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)){ - __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); - __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); - - /* Enable the GPMC Mapping */ - __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | - ((NAND_BASE_ADR>>24) & 0x3F) | - (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); - delay(2000); - - if (nand_chip()){ -#ifdef CFG_PRINTF - printf("Unsupported Chip!\n"); -#endif - return 1; - } - - } - - if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)){ - __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); - __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); - - /* Enable the GPMC Mapping */ - __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | - ((ONENAND_BASE>>24) & 0x3F) | - (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); - delay(2000); - - if (onenand_chip()){ -#ifdef CFG_PRINTF - printf("OneNAND Unsupported !\n"); -#endif - return 1; - } - } - return 0; -} - -/* optionally do something like blinking LED */ -void board_hang (void) -{ while (0) {};} - -/****************************************************************************** - * Dummy function to handle errors for EABI incompatibility - *****************************************************************************/ -void raise(void) -{ -} - -/****************************************************************************** - * Dummy function to handle errors for EABI incompatibility - *****************************************************************************/ -void abort(void) -{ -} diff --git a/board/omap3evm/platform.S b/board/omap3evm/platform.S deleted file mode 100644 index 8368487..0000000 --- a/board/omap3evm/platform.S +++ /dev/null @@ -1,435 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004-2006 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/cpu.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> - -_TEXT_BASE: - .word TEXT_BASE /* sdram load addr from config.mk */ - -#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) -/************************************************************************** - * cpy_clk_code: relocates clock code into SRAM where its safer to execute - * R1 = SRAM destination address. - *************************************************************************/ -.global cpy_clk_code - cpy_clk_code: - /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ -next2: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next2 - mov pc, lr /* back to caller */ - -/* **************************************************************************** - * NOTE: 3430 X-loader currently does not use this code. -* It could be removed its is kept for compatabily with u-boot. - * - * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed - * -executed from SRAM. - * R0 = CM_CLKEN_PLL-bypass value - * R1 = CM_CLKSEL1_PLL-m, n, and divider values - * R2 = CM_CLKSEL_CORE-divider values - * R3 = CM_IDLEST_CKGEN - addr dpll lock wait - * - * Note: If core unlocks/relocks and SDRAM is running fast already it gets - * confused. A reset of the controller gets it back. Taking away its - * L3 when its not in self refresh seems bad for it. Normally, this code - * runs from flash before SDR is init so that should be ok. - ******************************************************************************/ -.global go_to_speed - go_to_speed: - stmfd sp!, {r4-r6} - - /* move into fast relock bypass */ - ldr r4, pll_ctl_add - str r0, [r4] -wait1: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - beq wait1 /* if lock, loop */ - - /* set new dpll dividers _after_ in bypass */ - ldr r5, pll_div_add1 - str r1, [r5] /* set m, n, m2 */ - ldr r5, pll_div_add2 - str r2, [r5] /* set l3/l4/.. dividers*/ - ldr r5, pll_div_add3 /* wkup */ - ldr r2, pll_div_val3 /* rsm val */ - str r2, [r5] - ldr r5, pll_div_add4 /* gfx */ - ldr r2, pll_div_val4 - str r2, [r5] - ldr r5, pll_div_add5 /* emu */ - ldr r2, pll_div_val5 - str r2, [r5] - - /* now prepare GPMC (flash) for new dpll speed */ - /* flash needs to be stable when we jump back to it */ - ldr r5, flash_cfg3_addr - ldr r2, flash_cfg3_val - str r2, [r5] - ldr r5, flash_cfg4_addr - ldr r2, flash_cfg4_val - str r2, [r5] - ldr r5, flash_cfg5_addr - ldr r2, flash_cfg5_val - str r2, [r5] - ldr r5, flash_cfg1_addr - ldr r2, [r5] - orr r2, r2, #0x3 /* up gpmc divider */ - str r2, [r5] - - /* lock DPLL3 and wait a bit */ - orr r0, r0, #0x7 /* set up for lock mode */ - str r0, [r4] /* lock */ - nop /* ARM slow at this point working at sys_clk */ - nop - nop - nop -wait2: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - bne wait2 /* if lock, loop */ - nop - nop - nop - nop - ldmfd sp!, {r4-r6} - mov pc, lr /* back to caller, locked */ - -_go_to_speed: .word go_to_speed - -/* these constants need to be close for PIC code */ -/* The Nor has to be in the Flash Base CS0 for this condition to happen */ -flash_cfg1_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) -flash_cfg3_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) -flash_cfg3_val: - .word STNOR_GPMC_CONFIG3 -flash_cfg4_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) -flash_cfg4_val: - .word STNOR_GPMC_CONFIG4 -flash_cfg5_val: - .word STNOR_GPMC_CONFIG5 -flash_cfg5_addr: - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) -pll_ctl_add: - .word CM_CLKEN_PLL -pll_div_add1: - .word CM_CLKSEL1_PLL -pll_div_add2: - .word CM_CLKSEL_CORE -pll_div_add3: - .word CM_CLKSEL_WKUP -pll_div_val3: - .word (WKUP_RSM << 1) -pll_div_add4: - .word CM_CLKSEL_GFX -pll_div_val4: - .word (GFX_DIV << 0) -pll_div_add5: - .word CM_CLKSEL1_EMU -pll_div_val5: - .word CLSEL1_EMU_VAL - -#endif - -.globl lowlevel_init -lowlevel_init: - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -REG_CONTROL_STATUS: - .word CONTROL_STATUS -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK - - -/* DPLL(1-4) PARAM TABLES */ -/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal - * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). - * The values are defined for all possible sysclk and for ES1 and ES2. - */ - -mpu_dpll_param: -/* 12MHz */ -/* ES1 */ -.word 0x0FE -.word 0x07 -.word 0x05 -.word 0x01 -/* ES2 */ -.word 0x0FA -.word 0x05 -.word 0x07 -.word 0x01 - -/* 13MHz */ -/* ES1 */ -.word 0x17D -.word 0x0C -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x1F4 -.word 0x0C -.word 0x03 -.word 0x01 - -/* 19.2MHz */ -/* ES1 */ -.word 0x179 -.word 0x12 -.word 0x04 -.word 0x01 -/* ES2 */ -.word 0x271 -.word 0x17 -.word 0x03 -.word 0x01 - -/* 26MHz */ -/* ES1 */ -.word 0x17D -.word 0x19 -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x0FA -.word 0x0C -.word 0x07 -.word 0x01 - -/* 38.4MHz */ -/* ES1 */ -.word 0x1FA -.word 0x32 -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x271 -.word 0x2F -.word 0x03 -.word 0x01 - - -.globl get_mpu_dpll_param -get_mpu_dpll_param: - adr r0, mpu_dpll_param - mov pc, lr - -iva_dpll_param: -/* 12MHz */ -/* ES1 */ -.word 0x07D -.word 0x05 -.word 0x07 -.word 0x01 -/* ES2 */ -.word 0x0B4 -.word 0x05 -.word 0x07 -.word 0x01 - -/* 13MHz */ -/* ES1 */ -.word 0x0FA -.word 0x0C -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x168 -.word 0x0C -.word 0x03 -.word 0x01 - -/* 19.2MHz */ -/* ES1 */ -.word 0x082 -.word 0x09 -.word 0x07 -.word 0x01 -/* ES2 */ -.word 0x0E1 -.word 0x0B -.word 0x06 -.word 0x01 - -/* 26MHz */ -/* ES1 */ -.word 0x07D -.word 0x0C -.word 0x07 -.word 0x01 -/* ES2 */ -.word 0x0B4 -.word 0x0C -.word 0x07 -.word 0x01 - -/* 38.4MHz */ -/* ES1 */ -.word 0x13F -.word 0x30 -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x0E1 -.word 0x17 -.word 0x06 -.word 0x01 - - -.globl get_iva_dpll_param -get_iva_dpll_param: - adr r0, iva_dpll_param - mov pc, lr - -core_dpll_param: -/* 12MHz */ -/* ES1 */ -.word 0x19F -.word 0x0E -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x0A6 -.word 0x05 -.word 0x07 -.word 0x01 - -/* 13MHz */ -/* ES1 */ -.word 0x1B2 -.word 0x10 -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x14C -.word 0x0C -.word 0x03 -.word 0x01 - -/* 19.2MHz */ -/* ES1 */ -.word 0x19F -.word 0x17 -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x19F -.word 0x17 -.word 0x03 -.word 0x01 - -/* 26MHz */ -/* ES1 */ -.word 0x1B2 -.word 0x21 -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x0A6 -.word 0x0C -.word 0x07 -.word 0x01 - -/* 38.4MHz */ -/* ES1 */ -.word 0x19F -.word 0x2F -.word 0x03 -.word 0x01 -/* ES2 */ -.word 0x19F -.word 0x2F -.word 0x03 -.word 0x01 - -.globl get_core_dpll_param -get_core_dpll_param: - adr r0, core_dpll_param - mov pc, lr - -/* PER DPLL values are same for both ES1 and ES2 */ -per_dpll_param: -/* 12MHz */ -.word 0xD8 -.word 0x05 -.word 0x07 -.word 0x09 - -/* 13MHz */ -.word 0x1B0 -.word 0x0C -.word 0x03 -.word 0x09 - -/* 19.2MHz */ -.word 0xE1 -.word 0x09 -.word 0x07 -.word 0x09 - -/* 26MHz */ -.word 0xD8 -.word 0x0C -.word 0x07 -.word 0x09 - -/* 38.4MHz */ -.word 0xE1 -.word 0x13 -.word 0x07 -.word 0x09 - -.globl get_per_dpll_param -get_per_dpll_param: - adr r0, per_dpll_param - mov pc, lr - diff --git a/board/omap3evm/x-load.lds b/board/omap3evm/x-load.lds deleted file mode 100644 index 5f352d3..0000000 --- a/board/omap3evm/x-load.lds +++ /dev/null @@ -1,54 +0,0 @@ -/* - * November 2006 - Changed to support 3430sdp device - * Copyright (c) 2004-2006 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/omap3/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -} |