diff options
Diffstat (limited to 'board')
46 files changed, 13487 insertions, 0 deletions
diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile new file mode 100644 index 0000000..e6f7629 --- /dev/null +++ b/board/omap2420h4/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap2420h4.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk new file mode 100644 index 0000000..1c770f3 --- /dev/null +++ b/board/omap2420h4/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2004 +# Texas Instruments, <www.ti.com> +# +# TI H4 board with OMAP2420 (ARM1136) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0 +# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) ES2 will be configurable +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +# CONFIG_PARTIAL_SRAM must be defined to use this. +TEXT_BASE = 0x80e80000 + +# Used with full SRAM boot. +# This is either with a GP system or a signed boot image. +# easiest, and safest way to go if you can. +# Comment out //CONFIG_PARTIAL_SRAM for this one. +# +#TEXT_BASE = 0x40280000 + diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c new file mode 100644 index 0000000..ef81b49 --- /dev/null +++ b/board/omap2420h4/omap2420h4.c @@ -0,0 +1,598 @@ +/* + * Copyright (C) 2005 Texas Instruments. + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap2420.h> +#include <asm/arch/bits.h> + +#include <asm/arch/mem.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> + +static void wait_for_command_complete(unsigned int wd_base); +static void watchdog_init(void); +static void peripheral_enable(void); +static void muxSetupUART1(void); +static u32 get_cpu_rev(void); + + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +#ifdef CFG_SDRAM_DDR +void +config_sdram_ddr(u32 rev) +{ + /* ball D11, mode 0 */ + __raw_writeb(0x08, 0x48000032); + + /* SDRC_CS0 Configuration */ + if (rev == CPU_2420_2422_ES1) { + __raw_writel(H4_2422_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + } else { + __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + } + + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + + /* + * CS0 SDRC Mode Register + * Burst length = 4 - DDR memory + * Serial mode + * CAS latency = 3 + */ + __raw_writel(0x00000032, SDRC_MR_0); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000002, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000002, SDRC_DLLB_CTRL); + } else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x + } + +} +#endif // CFG_SDRAM_DDR + + +#ifdef CFG_SDRAM_COMBO +void +config_sdram_combo(u32 rev) +{ + + u32 dllctrl=0; + + /* ball C12, mode 0 */ + __raw_writeb(0x00, 0x480000a1); + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */ + __raw_writeb(0x00, 0x480000a3); + + /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */ + __raw_writel(0x00000012, SDRC_SYSCONFIG); + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); + + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0); + + /* CS1 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* CS1 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_1); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ? + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + } +} + +#endif // CFG_SDRAM_COMBO + +#ifdef CFG_SDRAM_SDR +void +config_sdram_sdr(u32 rev) +{ + u32 dllctrl=0; + + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + + __raw_writel(0x00000012, SDRC_SYSCONFIG); + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); + + /* Chip-level shared interface management */ + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */ + if (rev == CPU_2420_2422_ES1) + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + else + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX14: 32Mbx32 */ + __raw_writel(H4_2420_SDRC_MDCFG_0_SDR, SDRC_MCFG_0); /* diff from combo case */ + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 2 - SDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2420_SDRC_MR_0_SDR, SDRC_MR_0); /* diff from combo case */ + + /* SDRC DLLA control register */ + /* Enable DLL, Load counter with 115 (middle of range) */ + /* Delay is 90 degrees */ + + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + } + +} +#endif // CFG_SDRAM_SDR + +#ifdef CFG_SDRAM_STACKED +void +config_sdram_stacked(u32 rev) +{ + + /* Pin Muxing for SDRC */ + __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */ + __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */ + __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */ + __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */ + + /* configure sdrc 32 bit for COMBO ddr sdram */ + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */ + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */ + + /* SDRC_SHARING */ + /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */ + //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(0x00004900, SDRC_SHARING); + + /* SDRC_CS0 Configuration */ + /* None for ES2.1 */ + + /* SDRC_CS1 Configuration */ + __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */ + + /* Disable power down of CKE */ + __raw_writel(0x00000085, SDRC_POWER); + + __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */ + __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */ + __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */ + __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */ + + /*Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(0x00000032, SDRC_MR_1); + __raw_writel(0x00000020, SDRC_EMR2_1); /* weak-strength driver */ + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x + } +} +#endif // CFG_SDRAM_STACKED + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ +int s_init(int skip) +{ + u32 rev; + + rev = get_cpu_rev(); + + watchdog_init(); + muxSetupUART1(); + delay(100); + + /*DPLL out = 2x DPLL --> core clock */ + __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); + + /*DPLL into low power bypass (others off) */ + __raw_writel(0x00000001, CM_CLKEN_PLL); + + /*MPU core clock = Core /2 = 300 */ + __raw_writel(MPU_DIV, CM_CLKSEL_MPU); + + /*DSPif=200, DSPif=100, IVA=200 */ + __raw_writel(DSP_DIV, CM_CLKSEL_DSP); + + /*GFX clock (L3/2) 50MHz */ + __raw_writel(GFX_DIV, CM_CLKSEL_GFX); + + /*L3=100, L4=100, DisplaySS=50 Vlync=96Mhz,ssi=100, usb=50 */ + __raw_writel(BUS_DIV, CM_CLKSEL1_CORE); + + /*12MHz apll src, 12/(1+1)*50=300 */ + __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); + + /*Valid the configuration */ + __raw_writel(0x00000001, PRCM_CLKCFG_CTRL); + delay(1000); + + /*Enable DPLL=300, 96MHz APLL locked. */ + __raw_writel(0x0000000F, CM_CLKEN_PLL); + delay(200000); + +#ifdef CFG_SDRAM_DDR + config_sdram_ddr(rev); +#elif defined(CFG_SDRAM_COMBO) + config_sdram_combo(rev); +#elif defined(CFG_SDRAM_SDR) + config_sdram_sdr(rev); +#elif defined(CFG_SDRAM_STACKED) + config_sdram_stacked(rev); +#else +#error SDRAM type not supported +#endif + + delay(20000); + peripheral_enable(); + return(0); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +static void watchdog_init(void) +{ +#define GP (BIT8|BIT9) + + /* There are 4 watch dogs. 1 secure, and 3 general purpose. + * I would expect that the ROM takes care of the secure one, + * but we will try also. Of the 3 GP ones, 1 can reset us + * directly, the other 2 only generate MPU interrupts. + */ + __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR); + +#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/ + __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR); + wait_for_command_complete(WD3_BASE); + __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR); + + __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR); + wait_for_command_complete(WD4_BASE); + __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR); +#endif + +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +static void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base+WWPS); + } while (pending); +} + + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +static void peripheral_enable(void) +{ + unsigned int v, if_clks=0, func_clks=0; + + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */ + __raw_writel(v, CM_CLKSEL2_CORE); + __raw_writel(0x1, CM_CLKSEL_WKUP); + +#ifdef CFG_NS16550 + /* Enable UART1 clock */ + func_clks |= BIT21; + if_clks |= BIT21; +#endif + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + delay(1000); + +#ifndef KERNEL_UPDATED + { +#define V1 0xffffffff +#define V2 0x00000007 + + __raw_writel(V1, CM_FCLKEN1_CORE); + __raw_writel(V2, CM_FCLKEN2_CORE); + __raw_writel(V1, CM_ICLKEN1_CORE); + __raw_writel(V1, CM_ICLKEN2_CORE); + } +#endif + +} + +/* Pin Muxing registers used for UART1 */ +#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) +#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) +#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) +#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) +/**************************************** + * Routine: muxSetupUART1 (ostboot) + * Description: Set up uart1 muxing + *****************************************/ +static void muxSetupUART1(void) +{ + volatile unsigned char *MuxConfigReg; + + /* UART1_CTS pin configuration, PIN = D21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RTS pin configuration, PIN = H21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_TX pin configuration, PIN = L20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RX pin configuration, PIN = T21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ +} + +int nand_init(void) +{ + u32 rev; + + rev = get_cpu_rev(); + + + /* GPMC pin muxing */ + (*(volatile int*)0x48000070) &= 0x000000FF; + (*(volatile int*)0x48000074) &= 0x00000000; + (*(volatile int*)0x48000078) &= 0x00000000; + (*(volatile int*)0x4800007C) &= 0x00000000; + (*(volatile int*)0x48000080) &= 0xFF000000; + + /* GPMC_IO_DIR */ + (*(volatile int*)0x4800008C) = 0x19000000; + + /* GPMC Configuration */ + (*(volatile int*)0x6800A010) = 0x0000000A; + while (((*(volatile int *)0x6800A014) & 0x00000001) == 0); + + (*(volatile int*)0x6800A050) = 0x00000001; + (*(volatile int*)0x6800A060) = 0x00001800; + (*(volatile int*)0x6800A064) = 0x00141400; + (*(volatile int*)0x6800A068) = 0x00141400; + (*(volatile int*)0x6800A06C) = 0x0F010F01; + (*(volatile int*)0x6800A070) = 0x010C1414; + (*(volatile int*)0x6800A074) = 0x00000A80; + (*(volatile int*)0x6800A078) = 0x00000C44; //base 0x04000000 + + (*(volatile int*)0x6800A0A8) = 0x00000000; + delay(1000); +#ifdef CFG_SDRAM_STACKED + (*(volatile int*)0x6800A090) = 0x00011000; +#else + (*(volatile int*)0x6800A090) = 0x00011200; +#endif + (*(volatile int*)0x6800A094) = 0x001f1f00; + (*(volatile int*)0x6800A098) = 0x00080802; + (*(volatile int*)0x6800A09C) = 0x1C091C09; + (*(volatile int*)0x6800A0A0) = 0x031A1F1F; + (*(volatile int*)0x6800A0A4) = 0x000003C2; + (*(volatile int*)0x6800A0A8) = 0x00000F48; + + if (rev != CPU_2420_2422_ES1) + (*(volatile int*)0x6800A040) = 0x1FF0; // es2.x + + if (nand_chip()){ + printf("Unsupported Chip!\n"); + return 1; + } + return 0; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 v; + v = __raw_readl(TAP_IDCODE_REG); + v = v >> 28; + return(v+1); /* currently 2422 and 2420 match up */ +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{} + + + diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S new file mode 100644 index 0000000..5cc37e5 --- /dev/null +++ b/board/omap2420h4/platform.S @@ -0,0 +1,218 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/omap2420.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#ifdef CONFIG_PARTIAL_SRAM + +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = PRCM_CLKCFG_CTRL - addr of valid reg + * R1 = CM_CLKEN_PLL - addr dpll ctlr reg + * R2 = dpll value + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + ******************************************************************************/ +.global go_to_speed + go_to_speed: + sub sp, sp, #0x4 /* get some stack space */ + str r4, [sp] /* save r4's value */ + + /* move into fast relock bypass */ + ldr r8, pll_ctl_add + mov r4, #0x2 + str r4, [r8] + ldr r4, pll_stat +block: + ldr r8, [r4] /* wait for bypass to take effect */ + and r8, r8, #0x3 + cmp r8, #0x1 + bne block + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div_add + ldr r8, pll_div_val + str r8, [r4] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r4, cfg3_0_addr + ldr r8, cfg3_0_val + str r8, [r4] + ldr r4, cfg4_0_addr + ldr r8, cfg4_0_val + str r8, [r4] + ldr r4, cfg1_0_addr + ldr r8, [r4] + orr r8, r8, #0x3 /* up gpmc divider */ + str r8, [r4] + + /* setup to 2x loop though code. The first loop pre-loads the + * icache, the 2nd commits the prcm config, and locks the dpll + */ + mov r4, #0x1000 /* spin spin spin */ + mov r8, #0x4 /* first pass condition & set registers */ + cmp r8, #0x4 +2: + ldrne r8, [r3] /* DPLL lock check */ + and r8, r8, #0x7 + cmp r8, #0x2 + beq 4f +3: + subeq r8, r8, #0x1 + streq r8, [r0] /* commit dividers (2nd time) */ + nop +lloop1: + sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop1 + mov r4, #0x40000 + cmp r8, #0x1 + nop + streq r2, [r1] /* lock dpll (2nd time) */ + nop +lloop2: + sub r4, r4, #0x1 /* loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop2 + mov r4, #0x40000 + cmp r8, #0x1 + nop + ldreq r8, [r3] /* get lock condition for dpll */ + cmp r8, #0x4 /* first time though? */ + bne 2b + moveq r8, #0x2 /* set to dpll check condition. */ + beq 3b /* if condition not true branch */ +4: + ldr r4, [sp] + add sp, sp, #0x4 /* return stack space */ + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +cfg3_0_addr: + .word GPMC_CONFIG3_0 +cfg3_0_val: + .word SMNAND_GPMC_CONFIG3 +cfg4_0_addr: + .word GPMC_CONFIG4_0 +cfg4_0_val: + .word SMNAND_GPMC_CONFIG4 +cfg1_0_addr: + .word GPMC_CONFIG1_0 +pll_ctl_add: + .word CM_CLKEN_PLL +pll_stat: + .word CM_IDLEST_CKGEN +pll_div_add: + .word CM_CLKSEL1_PLL +pll_div_val: + .word DPLL_VAL /* DPLL setting (300MHz default) */ +#endif + +.globl platformsetup +platformsetup: + mov r3, r0 /* save skip information */ +#ifdef CONFIG_APTIX + ldr r0, REG_SDRC_MCFG_0 + ldr r1, VAL_SDRC_MCFG_0 + str r1, [r0] + ldr r0, REG_SDRC_MR_0 + ldr r1, VAL_SDRC_MR_0 + str r1, [r0] + /* a ddr needs emr1 set here */ + ldr r0, REG_SDRC_SHARING + ldr r1, VAL_SDRC_SHARING + str r1, [r0] + ldr r0, REG_SDRC_RFR_CTRL_0 + ldr r1, VAL_SDRC_RFR_CTRL_0 + str r1, [r0] + + /* little delay after init */ + mov r2, #0x1800 +1: + subs r2, r2, #0x1 + bne 1b +#endif +#ifdef CONFIG_PARTIAL_SRAM + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + mov r0, r3 /* pass skip info to s_init */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ +#endif + + /* map interrupt controller */ + ldr r0, VAL_INTH_SETUP + mcr p15, 0, r0, c15, c2, 4 + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +VAL_INTH_SETUP: + .word PERIFERAL_PORT_BASE +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + + + + + + diff --git a/board/omap2420h4/x-load.lds b/board/omap2420h4/x-load.lds new file mode 100644 index 0000000..f664ca7 --- /dev/null +++ b/board/omap2420h4/x-load.lds @@ -0,0 +1,54 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap2430sdp/Makefile b/board/omap2430sdp/Makefile new file mode 100644 index 0000000..b6c984c --- /dev/null +++ b/board/omap2430sdp/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap2430sdp.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap2430sdp/config.mk b/board/omap2430sdp/config.mk new file mode 100644 index 0000000..7bc5078 --- /dev/null +++ b/board/omap2430sdp/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2004 +# Texas Instruments, <www.ti.com> +# +# TI H4 board with OMAP2420 (ARM1136) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0 +# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) ES2 will be configurable +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# 2430 h4 has same mem configuration as h4. + +# For use with external or internal boots. +# CONFIG_PARTIAL_SRAM must be defined to use this. +TEXT_BASE = 0x80e80000 + +# Used with full SRAM boot. +# This is either with a GP system or a signed boot image. +# easiest, and safest way to go if you can. +# Comment out //CONFIG_PARTIAL_SRAM for this one. +# +#TEXT_BASE = 0x40280000 + diff --git a/board/omap2430sdp/omap2430sdp.c b/board/omap2430sdp/omap2430sdp.c new file mode 100644 index 0000000..f2a7b42 --- /dev/null +++ b/board/omap2430sdp/omap2430sdp.c @@ -0,0 +1,746 @@ +/* + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap2430.h> +#include <asm/arch/bits.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> + +static void wait_for_command_complete(unsigned int wd_base); +static void watchdog_init(void); +static void peripheral_enable(void); +static void muxSetupAll(void); +static u32 get_cpu_rev(void); +static u32 get_device_type(void); +static void prcm_init(void); + + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 v; + v = __raw_readl(TAP_IDCODE_REG); + v = v >> 28; + return(v+1); /* currently 2422 and 2420 match up */ +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/************************************************************* + * Helper function to wait for the status of a register + *************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return(1); + if (i==bound) + return(0); + } while (1); +} + +/************************************************************* + * Support for multiple type of memory types + *************************************************************/ +#ifdef CFG_SDRAM_DDR +void +config_sdram_ddr(u32 rev) +{ + /* ball D11, mode 0 */ + __raw_writeb(0x08, 0x48000032); + + /* SDRC_CS0 Configuration */ + __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + + /* + * CS0 SDRC Mode Register + * Burst length = 4 - DDR memory + * Serial mode + * CAS latency = 3 + */ + __raw_writel(0x00000032, SDRC_MR_0); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x + +} +#endif // CFG_SDRAM_DDR + +#ifdef CFG_SDRAM_COMBO +void +config_sdram_combo(u32 rev) +{ + + u32 dllctrl=0; + + /* ball C12, mode 0 */ + __raw_writeb(0x00, 0x480000a1); + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */ + __raw_writeb(0x00, 0x480000a3); + + /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */ + __raw_writel(0x00000012, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */ + __raw_writel(0x00000000, SDRC_SYSCONFIG); + + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + if (rev == CPU_2420_2422_ES1) + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + else + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + + /* This is reqd only for ES1 */ + if (rev == CPU_242X_ES1) + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0); + + /* CS1 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); + /* This is reqd only for ES1 */ + if (rev == CPU_242X_ES1) + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, 0x680090d8); + __raw_writel(CMD_PRECHARGE, 0x680090d8); + __raw_writel(CMD_AUTOREFRESH, 0x680090d8); + __raw_writel(CMD_AUTOREFRESH, 0x680090d8); + + /* CS1 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, 0x680090b4); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + // __raw_writel(0x00009808, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ? + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + //__raw_writel(0x00009808, SDRC_DLLB_CTRL); // ES2.x + } +} + +#endif // CFG_SDRAM_COMBO + +#ifdef CFG_2430SDRAM_DDR +void +config_2430sdram_ddr(u32 rev) +{ + u32 dllstat, dllctrl; + + __raw_writel(0x00000012, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */ + __raw_writel(0x00000000, SDRC_SYSCONFIG); + + /* Chip-level shared interface management */ + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */ + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX14: 32Mbx32 */ + __raw_writel(SDP_2430_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_2430_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + + __raw_writel(H4_2420_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 2 - SDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2420_SDRC_MR_0_DDR, SDRC_MR_0); + + /* Set up SDRC DLL values for 2430 DDR */ + dllctrl = (SDP_2430_SDRC_DLLAB_CTRL & ~BIT2); /* set target ctrl val */ + __raw_writel(dllctrl, SDRC_DLLA_CTRL); /* set lock mode */ + __raw_writel(dllctrl, SDRC_DLLB_CTRL); /* set lock mode */ + delay(0x1000); /* time to track to center */ + dllstat = __raw_readl(SDRC_DLLA_STATUS) & 0xFF00; /* get status */ + dllctrl = (dllctrl & 0x00FF) | dllstat | BIT2; /* build unlock value */ + __raw_writel(dllctrl, SDRC_DLLA_CTRL); /* set unlock mode */ + __raw_writel(dllctrl, SDRC_DLLB_CTRL); /* set unlock mode */ +} +#endif // CFG_2430SDRAM_DDR + +#ifdef CFG_SDRAM_STACKED +void +config_sdram_stacked(u32 rev) +{ + + /* Pin Muxing for SDRC */ + __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */ + __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */ + __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */ + __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */ + + /* configure sdrc 32 bit for COMBO ddr sdram */ + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */ + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */ + + /* SDRC_SHARING */ + /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */ + //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(0x00004900, SDRC_SHARING); + + /* SDRC_CS0 Configuration */ + /* None for ES2.1 */ + + /* SDRC_CS1 Configuration */ + __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */ + + /* Disable power down of CKE */ + __raw_writel(0x00000085, SDRC_POWER); + + __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */ + __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */ + __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */ + __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */ + + /*Manual Command sequence */ + __raw_writel(0x00000000, 0x680090D8); + __raw_writel(0x00000001, 0x680090D8); + __raw_writel(0x00000002, 0x680090D8); + __raw_writel(0x00000002, 0x680090D8); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(0x00000032, 0x680090B4); + __raw_writel(0x00000020, 0x680090BC); /* weak-strength driver */ + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x + } +} +#endif // CFG_SDRAM_STACKED + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(u32 *shift) +{ +#define GPT_EN ((0<<2)|BIT1|BIT0) /* enable sys_clk NO-prescale /1 */ +#define GPT_CTR OMAP24XX_GPT2+TCRR /* read counter address */ + u32 start, cstart, cend, cdiff, val; + unsigned int v, if_clks=0, func_clks=0 ; + + + + if(__raw_readl(PRCM_CLKSRC_CTRL) & BIT7){ /* if currently /2 */ + *shift = 1; + }else{ + *shift = 0; + } + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* mask for sys_clk use */ + __raw_writel(val, CM_CLKSEL2_CORE); /* timer2 source to sys_clk */ + __raw_writel(BIT4, CM_ICLKEN1_CORE); /* timer2 interface clock on */ + __raw_writel(BIT4, CM_FCLKEN1_CORE); /* timer2 function clock on */ + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + __raw_writel(0, OMAP24XX_GPT2+TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP24XX_GPT2+TCLR); /* enable clock */ + /* enable 32kHz source */ /* enabled out of reset */ + /* determine sys_clk via gauging */ + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles*/ + while(__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(GPT_CTR); /* get start sys_clk count */ + while(__raw_readl(S32K_CR) < (start+20)); /* wait for 40 cycles */ + cend = __raw_readl(GPT_CTR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + /* based on number of ticks assign speed */ + if(cdiff > (19000 >> *shift)) + return(S38_4M); + else if (cdiff > (15200 >> *shift)) + return(S26M); + else if (cdiff > (13000 >> *shift)) + return(S24M); + else if (cdiff > (9000 >> *shift)) + return(S19_2M); + else if (cdiff > (7600 >> *shift)) + return(S13M); + else + return(S12M); +} + +/********************************************************************************* + * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default). + * -- called from SRAM + *********************************************************************************/ +void +prcm_init() +{ + u32 div, speed, val, div_by_2; + + val = __raw_readl(PRCM_CLKSRC_CTRL) & ~(BIT1 | BIT0); +#if defined(OMAP2430_SQUARE_CLOCK_INPUT) + __raw_writel(val, PRCM_CLKSRC_CTRL); +#else + __raw_writel((val | BIT0), PRCM_CLKSRC_CTRL); +#endif + speed = get_osc_clk_speed(&div_by_2); + if((speed > S19_2M) && (!div_by_2)){ /* if fast && /2 off, enable it */ + val = ~(BIT6|BIT7) & __raw_readl(PRCM_CLKSRC_CTRL); + val |= (0x2 << 6); /* divide by 2 if (24,26,38.4) -> (12/13/19.2) */ + __raw_writel(val, PRCM_CLKSRC_CTRL); + } + + __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */ + __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */ + __raw_writel(0, CM_ICLKEN1_CORE); + __raw_writel(0, CM_ICLKEN2_CORE); + + /*DPLL into low power bypass (others off) */ + __raw_writel(0x00000001, CM_CLKEN_PLL); + + __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */ + __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */ + __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */ + __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */ + __raw_writel(MDM_DIV, CM_CLKSEL_MDM); /* set mdm dividers */ + + div = BUS_DIV; + __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/SSi dividers */ + delay(1000); + + /*13MHz apll src, PRCM 'x' DPLL rate */ + __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); + + /*Valid the configuration */ + __raw_writel(0x00000001, PRCM_CLKCFG_CTRL); + delay(1000); + + /* set up APLLS_CLKIN per crystal */ + if (speed > S19_2M) + speed >>= 1; /* if fast shift to /2 range */ + val = (0x2 << 23); /* default to 13Mhz for 2430c */ + if (speed == S12M) + val = (0x3 << 23); + else if (speed == S19_2M) + val = (0x0 << 23); + val |= (~(BIT23|BIT24|BIT25) & __raw_readl(CM_CLKSEL1_PLL)); + __raw_writel(val, CM_CLKSEL1_PLL); + + __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */ + wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY);/* wait for apll lock */ + + delay(200000); +} + +void SEC_generic(void) +{ +/* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x68); /* REQ_INFO_PERMISSION_1 L*/ + __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ + __raw_writel(UNLOCK_2, PM_RT_APE_BASE_ADDR_ARM + 0x60); /* ADDR_MATCH_1 L*/ + + + __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ + + __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ + __raw_writel(UNLOCK_2, PM_OCM_RAM_BASE_ADDR_ARM + 0x80); /* ADDR_MATCH_2 L*/ + + /* IVA Changes */ + __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for general use. + ***********************************************************/ +void try_unlock_sram(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + mode = get_device_type(); + + if ((mode == GP_DEVICE) || (mode == HS_DEVICE) || (mode == EMU_DEVICE) + || (mode == TST_DEVICE)) { + /* Secure or Emulation device - HS/E/T */ + SEC_generic(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +int s_init(int skip) +{ + u32 rev; + + rev = get_cpu_rev(); + + watchdog_init(); + try_unlock_sram(); + muxSetupAll(); + delay(100); + prcm_init(); + +#ifdef CFG_SDRAM_DDR + config_sdram_ddr(rev); +#elif defined(CFG_SDRAM_COMBO) + config_sdram_combo(rev); +#elif defined(CFG_2430SDRAM_DDR) + config_2430sdram_ddr(rev); +#elif defined(CFG_SDRAM_STACKED) + config_sdram_stacked(rev); +#else +#error SDRAM type not supported +#endif + + delay(20000); + peripheral_enable(); + return(0); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +static void watchdog_init(void) +{ +#define GP (BIT8|BIT9) + + /* There are 4 watch dogs. 1 secure, and 3 general purpose. + * I would expect that the ROM takes care of the secure one, + * but we will try also. Of the 3 GP ones, 1 can reset us + * directly, the other 2 only generate MPU interrupts. + */ + __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR); + +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +static void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base+WWPS); + } while (pending); +} + + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +static void peripheral_enable(void) +{ + unsigned int v, if_clks=0, if_clks2 = 0, func_clks=0, func_clks2 = 0; + + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP24XX_GPT2 */ + __raw_writel(v, CM_CLKSEL2_CORE); + __raw_writel(0x1, CM_CLKSEL_WKUP); + +#ifdef CFG_NS16550 + /* Enable UART1 clock */ + func_clks |= BIT21; + if_clks |= BIT21; +#endif + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_ICLKEN2_CORE) | if_clks2; /* Interface clocks on */ + __raw_writel(v, CM_ICLKEN2_CORE); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + v = __raw_readl(CM_FCLKEN2_CORE) | func_clks2; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN2_CORE); + delay(1000); + +} + +/* Do pin muxing for all the devices used in X-Loader */ +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writeb(VALUE, OMAP24XX_CTRL_BASE + OFFSET); +static void muxSetupAll(void) +{ + /* UART 1*/ + MUX_VAL(0x00B1, 0x1B) /* uart1_cts- EN, HI, 3, ->gpio_32 */ + MUX_VAL(0x00B2, 0x1B) /* uart1_rts- EN, HI, 3, ->gpio_8 */ + MUX_VAL(0x00B3, 0x1B) /* uart1_tx- EN, HI, 3, ->gpio_9 */ + MUX_VAL(0x00B4, 0x1B) /* uart1_rx- EN, HI, 3, ->gpio_10 */ + MUX_VAL(0x0107, 0x01) /* ssi1_dat_tx- Dis, 1, ->uart1_tx */ + MUX_VAL(0x0108, 0x01) /* ssi1_flag_tx- Dis, 1, ->uart1_rts */ + MUX_VAL(0x0109, 0x01) /* ssi1_rdy_tx- Dis, 1, ->uart1_cts */ + MUX_VAL(0x010A, 0x01) /* ssi1_dat_rx- Dis, 1, ->uart1_rx */ + + /* Mux settings for SDRC */ + MUX_VAL(0x0054, 0x1B) /* sdrc_a14 - EN, HI, 3, ->gpio_0 */ + MUX_VAL(0x0055, 0x1B) /* sdrc_a13 - EN, HI, 3, ->gpio_1 */ + MUX_VAL(0x0056, 0x00) /* sdrc_a12 - Dis, 0 */ + MUX_VAL(0x0046, 0x00) /* sdrc_ncs1 - Dis, 0 */ + MUX_VAL(0x0048, 0x00) /* sdrc_cke1 - Dis, 0 */ + /* GPMC */ + MUX_VAL(0x0030, 0x00) /* gpmc_clk - Dis, 0 */ + MUX_VAL(0x0032, 0x00) /* gpmc_ncs1- Dis, 0 */ + MUX_VAL(0x0033, 0x00) /* gpmc_ncs2- Dis, 0 */ + MUX_VAL(0x0034, 0x03) /* gpmc_ncs3- Dis, 3, ->gpio_24 */ + MUX_VAL(0x0035, 0x03) /* gpmc_ncs4- Dis, 3, ->gpio_25 */ + MUX_VAL(0x0036, 0x00) /* gpmc_ncs5- Dis, 0 */ + MUX_VAL(0x0037, 0x03) /* gpmc_ncs6- Dis, 3, ->gpio_27 */ + MUX_VAL(0x0038, 0x00) /* gpmc_ncs7- Dis, 0 */ + MUX_VAL(0x0040, 0x18) /* gpmc_wait1- Dis, 0 */ + MUX_VAL(0x0041, 0x18) /* gpmc_wait2- Dis, 0 */ + MUX_VAL(0x0042, 0x1B) /* gpmc_wait3- EN, HI, 3, ->gpio_35 */ + MUX_VAL(0x0085, 0x1B) /* gpmc_a10- EN, HI, 3, ->gpio_3 */ +} + +int nand_init(void) +{ + u32 rev; + + /* GPMC Configuration */ + rev = get_cpu_rev(); + + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ +#ifdef CFG_NAND + __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ +#endif + + /* Set the GPMC Vals . For NAND boot on 2430SDP, NAND is mapped at CS0 + * , NOR at CS1 and MPDB at CS5. And oneNAND boot, we map oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS in done in u-boot anyway. So we don't have to bother doing it here. + */ + __raw_writel(0, GPMC_CONFIG7_0); + sdelay(1000); + +#ifdef CFG_NAND + __raw_writel( SMNAND_GPMC_CONFIG1, GPMC_CONFIG1_0); + __raw_writel( SMNAND_GPMC_CONFIG2, GPMC_CONFIG2_0); + __raw_writel( SMNAND_GPMC_CONFIG3, GPMC_CONFIG3_0); + __raw_writel( SMNAND_GPMC_CONFIG4, GPMC_CONFIG4_0); + __raw_writel( SMNAND_GPMC_CONFIG5, GPMC_CONFIG5_0); + __raw_writel( SMNAND_GPMC_CONFIG6, GPMC_CONFIG6_0); + +#else /* CFG_ONENAND */ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1_0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2_0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3_0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4_0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5_0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6_0); +#endif + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP24XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((OMAP24XX_GPMC_CS0_MAP>>24) & 0x3F) | + (1<<6) ), GPMC_CONFIG7_0); + sdelay(2000); +#ifdef CFG_NAND + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } +#else + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + +#endif + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} diff --git a/board/omap2430sdp/platform.S b/board/omap2430sdp/platform.S new file mode 100644 index 0000000..f221d7e --- /dev/null +++ b/board/omap2430sdp/platform.S @@ -0,0 +1,198 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mem.h> +#include <asm/arch/omap2430.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = PRCM_CLKCFG_CTRL - addr of valid reg + * R1 = CM_CLKEN_PLL - addr dpll ctlr reg + * R2 = dpll value + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + ******************************************************************************/ +.global go_to_speed + go_to_speed: + sub sp, sp, #0x4 /* get some stack space */ + str r4, [sp] /* save r4's value */ + + /* move into fast relock bypass */ + ldr r8, pll_ctl_add + mov r4, #0x2 + str r4, [r8] + ldr r4, pll_stat +block: + ldr r8, [r4] /* wait for bypass to take effect */ + and r8, r8, #0x3 + cmp r8, #0x1 + bne block + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div_add + ldr r8, pll_div_val + str r8, [r4] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r4, flash_cfg3_addr + ldr r8, flash_cfg3_val + str r8, [r4] + ldr r4, flash_cfg4_addr + ldr r8, flash_cfg4_val + str r8, [r4] + ldr r4, flash_cfg1_addr + ldr r8, [r4] + orr r8, r8, #0x3 /* up gpmc divider */ + str r8, [r4] + + /* setup to 2x loop though code. The first loop pre-loads the + * icache, the 2nd commits the prcm config, and locks the dpll + */ + mov r4, #0x1000 /* spin spin spin */ + mov r8, #0x4 /* first pass condition & set registers */ + cmp r8, #0x4 +2: + ldrne r8, [r3] /* DPLL lock check */ + and r8, r8, #0x7 + cmp r8, #0x2 + beq 4f +3: + subeq r8, r8, #0x1 + streq r8, [r0] /* commit dividers (2nd time) */ + nop +lloop1: + sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop1 + mov r4, #0x40000 + cmp r8, #0x1 + nop + streq r2, [r1] /* lock dpll (2nd time) */ + nop +lloop2: + sub r4, r4, #0x1 /* loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop2 + mov r4, #0x40000 + cmp r8, #0x1 + nop + ldreq r8, [r3] /* get lock condition for dpll */ + cmp r8, #0x4 /* first time though? */ + bne 2b + moveq r8, #0x2 /* set to dpll check condition. */ + beq 3b /* if condition not true branch */ +4: + ldr r4, [sp] + add sp, sp, #0x4 /* return stack space */ + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +#ifdef CFG_ONENAND +flash_cfg3_addr: + .word GPMC_CONFIG3_0 +flash_cfg3_val: + .word ONENAND_GPMC_CONFIG3 +flash_cfg4_addr: + .word GPMC_CONFIG4_0 +flash_cfg4_val: + .word ONENAND_GPMC_CONFIG4 +flash_cfg1_addr: + .word GPMC_CONFIG1_0 +#else +flash_cfg3_addr: + .word GPMC_CONFIG3_0 +flash_cfg3_val: + .word SMNAND_GPMC_CONFIG3 +flash_cfg4_addr: + .word GPMC_CONFIG4_0 +flash_cfg4_val: + .word SMNAND_GPMC_CONFIG4 +flash_cfg1_addr: + .word GPMC_CONFIG1_0 +#endif +pll_ctl_add: + .word CM_CLKEN_PLL +pll_stat: + .word CM_IDLEST_CKGEN +pll_div_add: + .word CM_CLKSEL1_PLL +pll_div_val: + .word DPLL_VAL /* DPLL setting (300MHz default) */ + +.globl platformsetup +platformsetup: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* map interrupt controller */ + ldr r0, VAL_INTH_SETUP + mcr p15, 0, r0, c15, c2, 4 + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +VAL_INTH_SETUP: + .word PERIFERAL_PORT_BASE +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + diff --git a/board/omap2430sdp/x-load.lds b/board/omap2430sdp/x-load.lds new file mode 100644 index 0000000..f12e8f8 --- /dev/null +++ b/board/omap2430sdp/x-load.lds @@ -0,0 +1,54 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004-2005 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3430labrador/Makefile b/board/omap3430labrador/Makefile new file mode 100644 index 0000000..d54b666 --- /dev/null +++ b/board/omap3430labrador/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap3430sdp.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3430labrador/config.mk b/board/omap3430labrador/config.mk new file mode 100644 index 0000000..d6ad6c5 --- /dev/null +++ b/board/omap3430labrador/config.mk @@ -0,0 +1,22 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0 +# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000'0000 (bank1) - re-mappable below CS1 + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40208800 diff --git a/board/omap3430labrador/omap3430sdp.c b/board/omap3430labrador/omap3430sdp.c new file mode 100644 index 0000000..89d9ff1 --- /dev/null +++ b/board/omap3430labrador/omap3430sdp.c @@ -0,0 +1,753 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +#define MAX_SIL_INDEX 3 + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param * get_mpu_dpll_param(void); +extern dpll_param * get_iva_dpll_param(void); +extern dpll_param * get_core_dpll_param(void); +extern dpll_param * get_per_dpll_param(void); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid=0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if(get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* set mdcfg */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + + /* set timing */ + __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif // CFG_3430SDRAM_DDR + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source *//* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return (S38_4M); + else if (cdiff > 15200) + return (S26M); + else if (cdiff > 13000) + return (S24M); + else if (cdiff > 9000) + return (S19_2M); + else if (cdiff > 7600) + return (S13M); + else + return (S12M); +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if(osc_clk == S38_4M) + *sys_clkin_sel= 4; + else if(osc_clk == S26M) + *sys_clkin_sel = 3; + else if(osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if(osc_clk == S13M) + *sys_clkin_sel = 1; + else if(osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk=0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if(sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if(cpu_is_3410()) + sil_index = 2; + else { + if(get_cpu_rev() == CPU_3430_ES1) + sil_index = 0; + else if(get_cpu_rev() == CPU_3430_ES2) + sil_index = 1; + } + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb ES1 only */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) { + secure_unlock(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 +////#ifdef CONFIG_SERIAL3 + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); +////#else + /* Enable UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); +////#endif +#endif + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4 lab*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5 lab*/\ + MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M1)) /*sys_ndmareq1 lab*/\ + MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_IO_DIR lab*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1 lab*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ + MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ +#ifdef CFG_NAND + __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ +#endif + + /* setup CS0 for Micron NAND, leave other CS's to u-boot */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND + __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + +#else /* CFG_ONENAND */ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); +#endif + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + +#ifdef CFG_NAND + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } +#else + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } +#endif + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} diff --git a/board/omap3430labrador/platform.S b/board/omap3430labrador/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/board/omap3430labrador/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/omap3430labrador/x-load.lds b/board/omap3430labrador/x-load.lds new file mode 100644 index 0000000..9402f74 --- /dev/null +++ b/board/omap3430labrador/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3430sdp/Makefile b/board/omap3430sdp/Makefile new file mode 100644 index 0000000..d54b666 --- /dev/null +++ b/board/omap3430sdp/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap3430sdp.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3430sdp/config.mk b/board/omap3430sdp/config.mk new file mode 100644 index 0000000..d6ad6c5 --- /dev/null +++ b/board/omap3430sdp/config.mk @@ -0,0 +1,22 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0 +# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000'0000 (bank1) - re-mappable below CS1 + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40208800 diff --git a/board/omap3430sdp/omap3430sdp.c b/board/omap3430sdp/omap3430sdp.c new file mode 100644 index 0000000..6ed62bc --- /dev/null +++ b/board/omap3430sdp/omap3430sdp.c @@ -0,0 +1,779 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +#define MAX_SIL_INDEX 3 + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param * get_mpu_dpll_param(); +extern dpll_param * get_iva_dpll_param(); +extern dpll_param * get_core_dpll_param(); +extern dpll_param * get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid=0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if(get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* set mdcfg */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + + /* set timing */ + __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif // CFG_3430SDRAM_DDR + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source *//* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return (S38_4M); + else if (cdiff > 15200) + return (S26M); + else if (cdiff > 13000) + return (S24M); + else if (cdiff > 9000) + return (S19_2M); + else if (cdiff > 7600) + return (S13M); + else + return (S12M); +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if(osc_clk == S38_4M) + *sys_clkin_sel= 4; + else if(osc_clk == S26M) + *sys_clkin_sel = 3; + else if(osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if(osc_clk == S13M) + *sys_clkin_sel = 1; + else if(osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk=0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if(sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if(cpu_is_3410()) + sil_index = 2; + else { + if(get_cpu_rev() == CPU_3430_ES1) + sil_index = 0; + else if(get_cpu_rev() == CPU_3430_ES2) + sil_index = 1; + } + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) { + secure_unlock(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* Enable UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); +#endif + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ +#ifdef CFG_NAND + __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ +#endif + + /* Set the GPMC Vals . For NAND boot on 3430SDP, NAND is mapped at CS0 + * , NOR at CS1 and MPDB at CS3. And oneNAND boot, we map oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS in done in u-boot anyway. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND + __raw_writel( SMNAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + +#else /* CFG_ONENAND */ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); +#endif + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); +#if defined(CFG_NAND) + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } +#elif defined(CFG_ONENAND) + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } +#endif + return 0; +} + +#ifdef CFG_CMD_FAT +typedef int (mmc_boot_addr) (void); +int mmc_boot(void) +{ + long size, i; + unsigned long offset = CFG_LOADADDR; + unsigned long count; + char buf[12]; + block_dev_desc_t *dev_desc = NULL; + int dev = 0; + int part = 1; + char *ep; + unsigned char ret = 0; + + printf("Starting X-loader on MMC \n"); + + ret = mmc_init(1); + if(ret == 0){ + printf("\n MMC init failed \n"); + return 0; + } + + dev_desc = mmc_get_dev(0); + fat_register_device(dev_desc, 1); + size = file_fat_read("u-boot.bin", (unsigned char *)offset, 0); + if (size == -1) { + return 0; + } + printf("\n%ld Bytes Read from MMC \n", size); + + printf("Starting OS Bootloader from MMC...\n"); + + ((mmc_boot_addr *) CFG_LOADADDR) (); + + return 0; +} +#endif + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} diff --git a/board/omap3430sdp/platform.S b/board/omap3430sdp/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/board/omap3430sdp/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/omap3430sdp/x-load.lds b/board/omap3430sdp/x-load.lds new file mode 100644 index 0000000..9402f74 --- /dev/null +++ b/board/omap3430sdp/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3530beagle/Makefile b/board/omap3530beagle/Makefile new file mode 100644 index 0000000..b7b51ce --- /dev/null +++ b/board/omap3530beagle/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap3530beagle.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3530beagle/config.mk b/board/omap3530beagle/config.mk new file mode 100644 index 0000000..f271b14 --- /dev/null +++ b/board/omap3530beagle/config.mk @@ -0,0 +1,20 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Beagle board uses TI OMAP3530 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Beagle has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40200800 diff --git a/board/omap3530beagle/omap3530beagle.c b/board/omap3530beagle/omap3530beagle.c new file mode 100644 index 0000000..073e35a --- /dev/null +++ b/board/omap3530beagle/omap3530beagle.c @@ -0,0 +1,1081 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* params for XM */ +#define CORE_DPLL_PARAM_M2 0x09 +#define CORE_DPLL_PARAM_M 0x360 +#define CORE_DPLL_PARAM_N 0xC + +/* BeagleBoard revisions */ +#define REVISION_AXBX 0x7 +#define REVISION_CX 0x6 +#define REVISION_C4 0x5 +#define REVISION_XM 0x0 + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(); +extern dpll_param *get_iva_dpll_param(); +extern dpll_param *get_core_dpll_param(); +extern dpll_param *get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return mode >>= 8; +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + + if (beagle_revision() == REVISION_XM) + return GPMC_NONE; + + u32 mem_type = get_sysboot_value(); + switch (mem_type) { + case 0: + case 2: + case 4: + case 16: + case 22: + return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: + return GPMC_NAND; + + case 3: + case 6: + return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: + return GPMC_MDOC; + + case 17: + case 18: + case 24: + return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: + return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if (get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/****************************************** + * beagle_identify + * Description: Detect if we are running on a Beagle revision Ax/Bx, + * C1/2/3, C4 or D. This can be done by reading + * the level of GPIO173, GPIO172 and GPIO171. This should + * result in + * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx + * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 + * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 + * GPIO173, GPIO172, GPIO171: 0 0 0 => XM + ******************************************/ +int beagle_revision(void) +{ + int rev; + + omap_request_gpio(171); + omap_request_gpio(172); + omap_request_gpio(173); + omap_set_gpio_direction(171, 1); + omap_set_gpio_direction(172, 1); + omap_set_gpio_direction(173, 1); + + rev = omap_get_gpio_datain(173) << 2 | + omap_get_gpio_datain(172) << 1 | + omap_get_gpio_datain(171); + omap_free_gpio(171); + omap_free_gpio(172); + omap_free_gpio(173); + + return rev; +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR + +#define MICRON_DDR 0 +#define NUMONYX_MCP 1 +int identify_xm_ddr() +{ + int mfr, id; + + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + nand_readid(&mfr, &id); + if (mfr == 0) + return MICRON_DDR; + if ((mfr == 0x20) && (id == 0xba)) + return NUMONYX_MCP; +} +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + switch(beagle_revision()) { + case REVISION_C4: + if (identify_xm_ddr() == NUMONYX_MCP) { + __raw_writel(0x4, SDRC_CS_CFG); /* 512MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_1); + __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } else { + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } + break; + case REVISION_XM: + if (identify_xm_ddr() == MICRON_DDR) { + __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_1); + } else { + __raw_writel(0x4, SDRC_CS_CFG); /* 512MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_1); + __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } + break; + default: + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } + + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + + delay(5000); + + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif /* CFG_3430SDRAM_DDR */ + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else + cdiv = 1; + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source */ + /* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start) ; /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + cdiff *= cdiv; + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if (osc_clk == S38_4M) + *sys_clkin_sel = 4; + else if (osc_clk == S26M) + *sys_clkin_sel = 3; + else if (osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if (osc_clk == S13M) + *sys_clkin_sel = 1; + else if (osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */ + clk_index = sys_clkin_sel / 2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + + if (beagle_revision() == REVISION_XM) { + sr32(CM_CLKSEL3_PLL, 0, 5, CORE_DPLL_PARAM_M2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, CORE_DPLL_PARAM_M); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, CORE_DPLL_PARAM_N); /* set n */ + } else { + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + } + + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT) */ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock(); + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + per_clocks_enable(); + prcm_init(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r(void) +{ + int rev; + + rev = beagle_revision(); + switch (rev) { + case REVISION_AXBX: + printf("Beagle Rev Ax/Bx\n"); + break; + case REVISION_CX: + printf("Beagle Rev C1/C2/C3\n"); + break; + case REVISION_C4: + if (identify_xm_ddr() == NUMONYX_MCP) + printf("Beagle Rev C4 from Special Computing\n"); + else + printf("Beagle Rev C4\n"); + break; + case REVISION_XM: + printf("Beagle xM Rev A\n"); + break; + default: + printf("Beagle unknown 0x%02x\n", rev); + } + + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); + +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); + sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); + + sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); + sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); + sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); + sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); + sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); + sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); + sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); + sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); + sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); + sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); + sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); + sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); + + /* Enable GPIO 5 & GPIO 6 clocks */ + sr32(CM_FCLKEN_PER, 17, 2, 0x3); + sr32(CM_ICLKEN_PER, 17, 2, 0x3); + + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M1)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(McSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(McSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(McSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29 */\ + MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ + MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals, NAND is mapped at CS0, oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS is done in u-boot. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND_K9F1G08R0A + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) { + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()) { +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + } +#endif + +#ifdef CFG_ONENAND + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) { + __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()) { +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } +#endif + return 0; +} + +#define DEBUG_LED1 149 /* gpio */ +#define DEBUG_LED2 150 /* gpio */ + +void blinkLEDs() +{ + void *p; + + /* Alternately turn the LEDs on and off */ + p = (unsigned long *)OMAP34XX_GPIO5_BASE; + while (1) { + /* turn LED1 on and LED2 off */ + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED1 % 32); + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED2 % 32); + + /* delay for a while */ + delay(1000); + + /* turn LED1 off and LED2 on */ + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED1 % 32); + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED2 % 32); + + /* delay for a while */ + delay(1000); + } +} + +/* optionally do something like blinking LED */ +void board_hang(void) +{ + while (1) + blinkLEDs(); +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/board/omap3530beagle/platform.S b/board/omap3530beagle/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/board/omap3530beagle/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/omap3530beagle/platform.S_old b/board/omap3530beagle/platform.S_old new file mode 100644 index 0000000..8368487 --- /dev/null +++ b/board/omap3530beagle/platform.S_old @@ -0,0 +1,435 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE +.word 0x07 +.word 0x05 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x1F4 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179 +.word 0x12 +.word 0x04 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D +.word 0x19 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA +.word 0x32 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x2F +.word 0x03 +.word 0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D +.word 0x05 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x168 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082 +.word 0x09 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x0B +.word 0x06 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D +.word 0x0C +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F +.word 0x30 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x17 +.word 0x06 +.word 0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x19F +.word 0x0E +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x10 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x14C +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x21 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8 +.word 0x05 +.word 0x07 +.word 0x09 + +/* 13MHz */ +.word 0x1B0 +.word 0x0C +.word 0x03 +.word 0x09 + +/* 19.2MHz */ +.word 0xE1 +.word 0x09 +.word 0x07 +.word 0x09 + +/* 26MHz */ +.word 0xD8 +.word 0x0C +.word 0x07 +.word 0x09 + +/* 38.4MHz */ +.word 0xE1 +.word 0x13 +.word 0x07 +.word 0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/omap3530beagle/x-load.lds b/board/omap3530beagle/x-load.lds new file mode 100644 index 0000000..9402f74 --- /dev/null +++ b/board/omap3530beagle/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3530gta04/Makefile b/board/omap3530gta04/Makefile new file mode 100644 index 0000000..436d974 --- /dev/null +++ b/board/omap3530gta04/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap3530gta04.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3530gta04/config.mk b/board/omap3530gta04/config.mk new file mode 100644 index 0000000..01eafc1 --- /dev/null +++ b/board/omap3530gta04/config.mk @@ -0,0 +1,23 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Beagle board uses TI OMAP3530 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Beagle has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# if you want X-Loader to load to RAM through peripheral boot +#TEXT_BASE = 0x40200000 # for serial loader + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40208800 diff --git a/board/omap3530gta04/omap3530gta04.c b/board/omap3530gta04/omap3530gta04.c new file mode 100644 index 0000000..04f310d --- /dev/null +++ b/board/omap3530gta04/omap3530gta04.c @@ -0,0 +1,1279 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <i2c.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* params for 37XX */ +#define CORE_DPLL_PARAM_M2 0x09 +#define CORE_DPLL_PARAM_M 0x360 +#define CORE_DPLL_PARAM_N 0xC + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(void); +extern dpll_param *get_iva_dpll_param(void); +extern dpll_param *get_core_dpll_param(void); +extern dpll_param *get_per_dpll_param(void); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v)) + +static char *rev_s[CPU_3XX_MAX_REV] = { + "1.0", + "2.0", + "2.1", + "3.0", + "3.1", + "UNKNOWN", + "UNKNOWN", + "3.1.2"}; + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + /* + use code like this to early enable USB charging! + so that the board boots with no battery but USB power + + if i2c does not work at this position, + try to move this code to gta04_revision() + + I2C_SET_BUS(0); + data = 0x01; + i2c_write(0x4B, 0x29, 1, &data, 1); + data = 0x0c; + i2c_write(0x4B, 0x2b, 1, &data, 1); + i2c_read(0x4B, 0x2a, 1, &data, 1); + +*/ + +#if 0 /* no - does not work as expected */ + + /* + For charging using USB, the software must enable the USB automatic + charge by forcing the BOOT_BCI[1] BCIAUTOUSB bit to 1. When the USB + charger is plugged in, the software detects the type of device + (USB charger or carkit charger). The software must set the POWER_CTRL[5] + OTG_EN bit to 1 at least 50 ms before forcing the BCIMFSTS4[2] USBFASTMCHG + bit to 1. + */ + + u8 data; + int i; + + I2C_SET_BUS(0); + + /* enable access to BCIIREF1 */ + data = 0xE7; + i2c_write(0x4A, 0x85, 1, &data, 1); // write BCIMFKEY + + /* set charging current = 852mA */ + data = 0xFF; + i2c_write(0x4A, 0x9B, 1, &data, 1); // write BCIIREF1 + + /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ + i2c_read(0x4B, 0x3D, 1, &data, 1); // read BOOT_BCI + data |= 0x33; // CONFIG_DONE | BCIAUTOWEN | BCIAUTOUSB | BCIAUTOAC + i2c_write(0x4B, 0x3D, 1, &data, 1); // write BOOT_BCI + + /* Enabling interfacing with usb through OCP */ + i2c_read(0x48, 0xFE, 1, &data, 1); // read BOOT_BCI + data |= 0x01; // PHY_DPLL_CLK + i2c_write(0x48, 0xFE, 1, &data, 1); // write BOOT_BCI + + do { + udelay(10); + i2c_read(0x48, 0xFE, 1, &data, 1); // read PHY_CLK_CTRL_STS + } while (!(data & 0x01)); /* loop until PHY DPLL is locked */ + + /* OTG_EN (POWER_CTRL[5]) to 1 */ + data = 0x20; + i2c_write(0x48, 0xAD, 1, &data, 1); // write POWER_CTRL_SET + + for(i=0; i<50; i++) + udelay(1000); + + /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ + i2c_read(0x4A, 0x84, 1, &data, 1); // read BCIMFSTS4 + data |= 0x04; // USBFASTMCHG + i2c_write(0x4A, 0x84, 1, &data, 1); // write BCIMFSTS4 + +#endif + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return mode >>= 8; +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + u32 mem_type = get_sysboot_value(); + switch (mem_type) { + case 0: + case 2: + case 4: + case 16: + case 22: + return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: + return GPMC_NAND; + + case 3: + case 6: + return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: + return GPMC_MDOC; + + case 17: + case 18: + case 24: + return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: + return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_type(void) - extract cpu info + ******************************************/ +u32 get_cpu_type(void) +{ + return __raw_readl(CONTROL_OMAP_STATUS); +} + +/****************************************** + * get_cpu_id(void) - extract cpu id + * returns 0 for ES1.0, cpuid otherwise + ******************************************/ +u32 get_cpu_id(void) +{ + u32 cpuid = 0; + + /* + * On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate between ES1.0 and > ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); + if ((cpuid & 0xf) == 0x0) { + return 0; + } else { + /* Decode the IDs on > ES1.0 */ + cpuid = __raw_readl(CONTROL_IDCODE); + } + + return cpuid; +} + +/****************************************** + * get_cpu_family(void) - extract cpu info + ******************************************/ +u32 get_cpu_family(void) +{ + u16 hawkeye; + u32 cpu_family; + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_OMAP34XX; + + hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff; + switch (hawkeye) { + case HAWKEYE_OMAP34XX: + cpu_family = CPU_OMAP34XX; + break; + case HAWKEYE_AM35XX: + cpu_family = CPU_AM35XX; + break; + case HAWKEYE_OMAP36XX: + cpu_family = CPU_OMAP36XX; + break; + default: + cpu_family = CPU_OMAP34XX; + } + + return cpu_family; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * Print CPU information + ******************************************/ +int print_cpuinfo (void) +{ + char *cpu_family_s, *cpu_s, *sec_s; + + switch (get_cpu_family()) { + case CPU_OMAP34XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3503: + cpu_s = "3503"; + break; + case OMAP3515: + cpu_s = "3515"; + break; + case OMAP3525: + cpu_s = "3525"; + break; + case OMAP3530: + cpu_s = "3530"; + break; + default: + cpu_s = "35XX"; + break; + } + break; + case CPU_AM35XX: + cpu_family_s = "AM"; + switch (get_cpu_type()) { + case AM3505: + cpu_s = "3505"; + break; + case AM3517: + cpu_s = "3517"; + break; + default: + cpu_s = "35XX"; + break; + } + break; + case CPU_OMAP36XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3730: + cpu_s = "3630/3730"; + break; + default: + cpu_s = "36XX/37XX"; + break; + } + break; + default: + cpu_family_s = "OMAP"; + cpu_s = "35XX"; + } + + switch (get_device_type()) { + case TST_DEVICE: + sec_s = "TST"; + break; + case EMU_DEVICE: + sec_s = "EMU"; + break; + case HS_DEVICE: + sec_s = "HS"; + break; + case GP_DEVICE: + sec_s = "GP"; + break; + default: + sec_s = "?"; + } + + printf("%s%s-%s ES%s\n", + cpu_family_s, cpu_s, sec_s, rev_s[get_cpu_rev()]); + + return 0; +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if (get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +int gta04_revision(void) +{ + int rev; + static char revision[8] = { /* revision table defined by pull-down R305, R306, R307 */ + 9, + 6, + 7, + 3, + 8, + 4, + 5, + 2 + }; + omap_request_gpio(171); + omap_request_gpio(172); + omap_request_gpio(173); + omap_set_gpio_direction(171, 1); + omap_set_gpio_direction(172, 1); + omap_set_gpio_direction(173, 1); + + rev = omap_get_gpio_datain(173) << 2 | + omap_get_gpio_datain(172) << 1 | + omap_get_gpio_datain(171) << 0; + omap_free_gpio(171); + omap_free_gpio(172); + omap_free_gpio(173); + + return revision[rev]; /* 000 means GTA04A2 */ +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR + +#define MICRON_DDR 0 +#define NUMONYX_MCP 1 +#define MICRON_MCP 2 + +int identify_xm_ddr(void) +{ +#ifdef CONFIG_NAND + + int mfr, id; + extern int nand_readid(int *mfr, int *id); + + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + nand_readid(&mfr, &id); + if (mfr == 0) + return MICRON_DDR; + if ((mfr == 0x20) && (id == 0xba)) + return NUMONYX_MCP; + if ((mfr == 0x2c) && (id == 0xbc)) + return MICRON_MCP; +#endif + return 0; +} + +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + // FIXME: can we not only read the chip maker but also bus clock speed and bank size??? + + switch (identify_xm_ddr()) { + case NUMONYX_MCP: + // should not be used on GTA04 + __raw_writel(0x4, SDRC_CS_CFG); /* 512MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_1); + __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + break; + case MICRON_MCP: + // big Micron + __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_1); + break; + case MICRON_DDR: + default: + // small micron + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + break; + } + + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + + delay(5000); + + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif /* CFG_3430SDRAM_DDR */ + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else + cdiv = 1; + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source */ + /* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start) ; /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + cdiff *= cdiv; + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if (osc_clk == S38_4M) + *sys_clkin_sel = 4; + else if (osc_clk == S26M) + *sys_clkin_sel = 3; + else if (osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if (osc_clk == S13M) + *sys_clkin_sel = 1; + else if (osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */ + clk_index = sys_clkin_sel / 2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + + if (get_cpu_family() == CPU_OMAP36XX) { + sr32(CM_CLKSEL3_PLL, 0, 5, CORE_DPLL_PARAM_M2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, CORE_DPLL_PARAM_M); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, CORE_DPLL_PARAM_N); /* set n */ + } else { + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + } + + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT) */ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock(); + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + per_clocks_enable(); + prcm_init(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r(void) +{ + int rev; + print_cpuinfo(); + rev = gta04_revision(); + printf("Board detected: GTA04A%d\n", rev); + switch (identify_xm_ddr()) { + case NUMONYX_MCP: printf("Memory: Numonyx MCP 512MB/bank\n"); break; + case MICRON_MCP: printf("Memory: Micron MCP 256MB/bank\n"); break; + case MICRON_DDR: printf("Memory: Micron DDR 128MB/bank\n"); break; + default: printf("Memory: unknown 128MB/bank\n"); break; + } + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); + +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); + sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); + + sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); + sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); + sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); + sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); + sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); + sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); + sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); + sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); + sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); + sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); + sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); + sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); + + /* Enable GPIO 5 & GPIO 6 clocks */ + sr32(CM_FCLKEN_PER, 17, 2, 0x3); + sr32(CM_ICLKEN_PER, 17, 2, 0x3); + + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ +MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M4)) /*GPMC_nCS6=gpio_57=gpt11_pwm*/\ + MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ +MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M4)) /*UART3_CTS_RCTX */\ +MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M4)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(McSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(McSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(McSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ +MUX_VAL(CP(ETK_CTL), (IEN | PTU | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29 */\ + MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ + MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +#if 1 // enable backlight as first boot indication + MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)); /*GPMC_nCS6=gpio_57=gpt11_pwm*/ +#endif +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ +#ifdef CONFIG_NAND + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals, NAND is mapped at CS0, oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS is done in u-boot. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND_K9F1G08R0A + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) { + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()) { +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + } +#endif + +#ifdef CFG_ONENAND + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) { + __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()) { +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } +#endif +#endif + return 0; +} + +// 57 for backlight + +#define DEBUG_LED1 149 /* gpio */ +// #define DEBUG_LED2 150 /* gpio */ + +void blinkLEDs(void) +{ + void *p; + + /* Alternately turn the LEDs on and off */ + p = (unsigned long *)OMAP34XX_GPIO5_BASE; + while (1) { + /* turn LED1 on and LED2 off */ + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED1 % 32); +#ifdef DEBUG_LED2 + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED2 % 32); +#endif + /* delay for a while */ + delay(1000); + + /* turn LED1 off and LED2 on */ + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED1 % 32); +#ifdef DEBUG_LED2 + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED2 % 32); +#endif + /* delay for a while */ + delay(1000); + } +} + +/* optionally do something like blinking LED */ +void board_hang(void) +{ + while (1) + blinkLEDs(); +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/board/omap3530gta04/platform.S b/board/omap3530gta04/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/board/omap3530gta04/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/omap3evm/Makefile b/board/omap3evm/Makefile new file mode 100644 index 0000000..d83f45e --- /dev/null +++ b/board/omap3evm/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap3evm.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3evm/config.mk b/board/omap3evm/config.mk new file mode 100644 index 0000000..a45ec22 --- /dev/null +++ b/board/omap3evm/config.mk @@ -0,0 +1,19 @@ +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# OMAP3EVM board uses OMAP3430 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments# +# +# OMAP3EVM has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40200800 diff --git a/board/omap3evm/omap3evm.c b/board/omap3evm/omap3evm.c new file mode 100644 index 0000000..16c1f70 --- /dev/null +++ b/board/omap3evm/omap3evm.c @@ -0,0 +1,814 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param * get_mpu_dpll_param(); +extern dpll_param * get_iva_dpll_param(); +extern dpll_param * get_core_dpll_param(); +extern dpll_param * get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + u32 mem_type = get_sysboot_value(); + switch (mem_type){ + case 0: + case 2: + case 4: + case 16: + case 22: return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: return GPMC_NAND; + + case 3: + case 6: return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: return GPMC_MDOC; + + case 17: + case 18: + case 24: return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid=0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if(get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* set mdcfg */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + + /* set timing */ + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)){ + __raw_writel(INFINEON_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(INFINEON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + } + if ((get_mem_type() == GPMC_NAND) ||(get_mem_type() == MMC_NAND)){ + __raw_writel(MICRON_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + } + + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif // CFG_3430SDRAM_DDR + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source *//* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return (S38_4M); + else if (cdiff > 15200) + return (S26M); + else if (cdiff > 13000) + return (S24M); + else if (cdiff > 9000) + return (S19_2M); + else if (cdiff > 7600) + return (S13M); + else + return (S12M); +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if(osc_clk == S38_4M) + *sys_clkin_sel= 4; + else if(osc_clk == S26M) + *sys_clkin_sel = 3; + else if(osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if(osc_clk == S13M) + *sys_clkin_sel = 1; + else if(osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk=0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if(sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) { + secure_unlock(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* Enable UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); +#endif + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals . For NAND boot on 3430SDP, NAND is mapped at CS0 + * , NOR at CS1 and MPDB at CS3. And oneNAND boot, we map oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS in done in u-boot anyway. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)){ + __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + + } + + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)){ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/board/omap3evm/platform.S b/board/omap3evm/platform.S new file mode 100644 index 0000000..8368487 --- /dev/null +++ b/board/omap3evm/platform.S @@ -0,0 +1,435 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE +.word 0x07 +.word 0x05 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x1F4 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179 +.word 0x12 +.word 0x04 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D +.word 0x19 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA +.word 0x32 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x2F +.word 0x03 +.word 0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D +.word 0x05 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x168 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082 +.word 0x09 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x0B +.word 0x06 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D +.word 0x0C +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F +.word 0x30 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x17 +.word 0x06 +.word 0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x19F +.word 0x0E +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x10 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x14C +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x21 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8 +.word 0x05 +.word 0x07 +.word 0x09 + +/* 13MHz */ +.word 0x1B0 +.word 0x0C +.word 0x03 +.word 0x09 + +/* 19.2MHz */ +.word 0xE1 +.word 0x09 +.word 0x07 +.word 0x09 + +/* 26MHz */ +.word 0xD8 +.word 0x0C +.word 0x07 +.word 0x09 + +/* 38.4MHz */ +.word 0xE1 +.word 0x13 +.word 0x07 +.word 0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/omap3evm/x-load.lds b/board/omap3evm/x-load.lds new file mode 100644 index 0000000..5f352d3 --- /dev/null +++ b/board/omap3evm/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap4430panda/Makefile b/board/omap4430panda/Makefile new file mode 100644 index 0000000..6b6f9be --- /dev/null +++ b/board/omap4430panda/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2009 +# Texas Instruments, <www.ti.com> +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := omap4430panda.o clock.o syslib.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap4430panda/clock.c b/board/omap4430panda/clock.c new file mode 100644 index 0000000..792e5d6 --- /dev/null +++ b/board/omap4430panda/clock.c @@ -0,0 +1,804 @@ +/* + * (C) Copyright 2009 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> +#include <asm/arch/bits.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks443x.h> +#include <command.h> + +#define CONFIG_OMAP4_SDC 1 + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int m2; + unsigned int m3; + unsigned int m4; + unsigned int m5; + unsigned int m6; + unsigned int m7; +}; + +/* Tables having M,N,M2 et al values for different sys_clk speeds + * This table is generated only for OPP100 + * The tables are organized as follows: + * Rows : 1 - 12M, 2 - 13M, 3 - 16.8M, 4 - 19.2M, 5 - 26M, 6 - 27M, 7 - 38.4M + */ + +/* MPU parameters */ +struct dpll_param mpu_dpll_param[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values */ +#ifdef CONFIG_MPU_600 + /* RUN MPU @ 600 MHz */ + {0x7d, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}, +#elif CONFIG_MPU_1000 + {0x69, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}, +#else + {0x1a, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}, +#endif +}; + +/* IVA parameters */ +struct dpll_param iva_dpll_param[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values */ +#ifdef CONFIG_OMAP4_SDC + {0x61, 0x03, 0x00, 0x00, 0x04, 0x07, 0x00, 0x00}, +#else + {0x61, 0x03, 0x00, 0x00, 0x04, 0x07, 0x00, 0x00}, +#endif +}; + +/* CORE parameters */ +struct dpll_param core_dpll_param[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values - DDR@200MHz*/ + {0x7d, 0x05, 0x02, 0x05, 0x08, 0x04, 0x06, 0x05}, +}; + +/* CORE parameters - ES2.1 */ +struct dpll_param core_dpll_param_ddr400[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values - DDR@400MHz*/ + {0x7d, 0x05, 0x01, 0x05, 0x08, 0x04, 0x06, 0x05}, +}; + +/* CORE parameters for L3 at 190 MHz - For ES1 only*/ +struct dpll_param core_dpll_param_l3_190[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values */ +#ifdef CONFIG_OMAP4_SDC +#ifdef CORE_190MHZ + {0x1f0, 0x18, 0x01, 0x05, 0x08, 0x04, 0x06, 0x05}, +#else /* Default CORE @166MHz */ + {0x1b0, 0x18, 0x01, 0x05, 0x08, 0x04, 0x06, 0x05}, +#endif +#else + {0x7d, 0x05, 0x01, 0x05, 0x08, 0x04, 0x06, 0x08}, +#endif +}; + +/* PER parameters */ +struct dpll_param per_dpll_param[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values */ +#if 0 + /* SDC settings */ + {0x0a, 0x00, 0x04, 0x03, 0x06, 0x05, 0x02, 0x03}, +#endif + {0x14, 0x00, 0x08, 0x06, 0x0c, 0x09, 0x04, 0x05}, +}; + +/* ABE parameters */ +struct dpll_param abe_dpll_param[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values */ +#ifdef CONFIG_OMAP4_SDC + {0x40, 0x18, 0x1, 0x1, 0x0, 0x0, 0x0, 0x0}, +#else + {0x40, 0x18, 0x1, 0x1, 0x0, 0x0, 0x0, 0x0}, +#endif +}; + +/* USB parameters */ +struct dpll_param usb_dpll_param[7] = { + /* 12M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 13M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 16.8M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 19.2M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 26M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 27M values */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, + /* 38.4M values */ +#ifdef CONFIG_OMAP4_SDC + {0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0}, +#else + {0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0}, +#endif +}; + +typedef struct dpll_param dpll_param; + +static void configure_mpu_dpll(u32 clk_index) +{ + dpll_param *dpll_param_p; + + /* Unlock the MPU dpll */ + sr32(CM_CLKMODE_DPLL_MPU, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_MPU, LDELAY); + + /* Program MPU DPLL */ + dpll_param_p = &mpu_dpll_param[clk_index]; + + sr32(CM_AUTOIDLE_DPLL_MPU, 0, 3, 0x0); /* Disable DPLL autoidle */ + + /* Set M,N,M2 values */ + sr32(CM_CLKSEL_DPLL_MPU, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_MPU, 0, 6, dpll_param_p->n); + sr32(CM_DIV_M2_DPLL_MPU, 0, 5, dpll_param_p->m2); + sr32(CM_DIV_M2_DPLL_MPU, 8, 1, 0x1); + + /* Lock the mpu dpll */ + sr32(CM_CLKMODE_DPLL_MPU, 0, 3, PLL_LOCK | 0x10); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_MPU, LDELAY); + + return; +} + +static void configure_iva_dpll(u32 clk_index) +{ + dpll_param *dpll_param_p; + + /* Unlock the IVA dpll */ + sr32(CM_CLKMODE_DPLL_IVA, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_IVA, LDELAY); + + /* CM_BYPCLK_DPLL_IVA = CORE_X2_CLK/2 */ + sr32(CM_BYPCLK_DPLL_IVA, 0, 2, 0x1); + + /* Program IVA DPLL */ + dpll_param_p = &iva_dpll_param[clk_index]; + + sr32(CM_AUTOIDLE_DPLL_IVA, 0, 3, 0x0); /* Disable DPLL autoidle */ + + /* Set M,N,M4,M5 */ + sr32(CM_CLKSEL_DPLL_IVA, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_IVA, 0, 7, dpll_param_p->n); + sr32(CM_DIV_M4_DPLL_IVA, 0, 5, dpll_param_p->m4); + sr32(CM_DIV_M4_DPLL_IVA, 8, 1, 0x1); + sr32(CM_DIV_M5_DPLL_IVA, 0, 5, dpll_param_p->m5); + sr32(CM_DIV_M5_DPLL_IVA, 8, 1, 0x1); + + /* Lock the iva dpll */ + sr32(CM_CLKMODE_DPLL_IVA, 0, 3, PLL_LOCK); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_IVA, LDELAY); + + return; +} + +static void configure_per_dpll(u32 clk_index) +{ + dpll_param *dpll_param_p; + + /* Unlock the PER dpll */ + sr32(CM_CLKMODE_DPLL_PER, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_PER, LDELAY); + + /* Program PER DPLL */ + dpll_param_p = &per_dpll_param[clk_index]; + + /* Disable autoidle */ + sr32(CM_AUTOIDLE_DPLL_PER, 0, 3, 0x0); + + sr32(CM_CLKSEL_DPLL_PER, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_PER, 0, 6, dpll_param_p->n); + sr32(CM_DIV_M2_DPLL_PER, 0, 5, dpll_param_p->m2); + sr32(CM_DIV_M3_DPLL_PER, 0, 5, dpll_param_p->m3); + sr32(CM_DIV_M4_DPLL_PER, 0, 5, dpll_param_p->m4); + sr32(CM_DIV_M5_DPLL_PER, 0, 5, dpll_param_p->m5); + sr32(CM_DIV_M6_DPLL_PER, 0, 5, dpll_param_p->m6); + sr32(CM_DIV_M7_DPLL_PER, 0, 5, dpll_param_p->m7); + +// if(omap_revision() == OMAP4430_ES1_0) +// { + /* Do this only on ES1.0 */ + sr32(CM_DIV_M2_DPLL_PER, 8, 1, 0x1); + sr32(CM_DIV_M3_DPLL_PER, 8, 1, 0x1); + sr32(CM_DIV_M4_DPLL_PER, 8, 1, 0x1); + sr32(CM_DIV_M5_DPLL_PER, 8, 1, 0x1); + sr32(CM_DIV_M6_DPLL_PER, 8, 1, 0x1); + sr32(CM_DIV_M7_DPLL_PER, 8, 1, 0x1); +// } + + /* Lock the per dpll */ + sr32(CM_CLKMODE_DPLL_PER, 0, 3, PLL_LOCK); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_PER, LDELAY); + + return; +} + +static void configure_abe_dpll(u32 clk_index) +{ + dpll_param *dpll_param_p; + + /* Select sys_clk as ref clk for ABE dpll */ + sr32(CM_ABE_PLL_REF_CLKSEL, 0, 32, 0x0); + + /* Enable slimbus and pad clocks */ + sr32(CM_CLKSEL_ABE, 0, 32, 0x500); + + /* Unlock the ABE dpll */ + sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_ABE, LDELAY); + + /* Program ABE DPLL */ + dpll_param_p = &abe_dpll_param[clk_index]; + + /* Disable autoidle */ + sr32(CM_AUTOIDLE_DPLL_ABE, 0, 3, 0x0); + + sr32(CM_CLKSEL_DPLL_ABE, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_ABE, 0, 6, dpll_param_p->n); + + /* Force DPLL CLKOUTHIF to stay enabled */ + sr32(CM_DIV_M2_DPLL_ABE, 0, 32, 0x500); + sr32(CM_DIV_M2_DPLL_ABE, 0, 5, dpll_param_p->m2); + sr32(CM_DIV_M2_DPLL_ABE, 8, 1, 0x1); + /* Force DPLL CLKOUTHIF to stay enabled */ + sr32(CM_DIV_M3_DPLL_ABE, 0, 32, 0x100); + sr32(CM_DIV_M3_DPLL_ABE, 0, 5, dpll_param_p->m3); + sr32(CM_DIV_M3_DPLL_ABE, 8, 1, 0x1); + + /* Lock the abe dpll */ + sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_LOCK); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_ABE, LDELAY); + + return; +} + +static void configure_usb_dpll(u32 clk_index) +{ + dpll_param *dpll_param_p; + + /* Select the 60Mhz clock 480/8 = 60*/ + sr32(CM_CLKSEL_USB_60MHz, 0, 32, 0x1); + + /* Unlock the USB dpll */ + sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_USB, LDELAY); + + /* Program USB DPLL */ + dpll_param_p = &usb_dpll_param[clk_index]; + + /* Disable autoidle */ + sr32(CM_AUTOIDLE_DPLL_USB, 0, 3, 0x0); + + sr32(CM_CLKSEL_DPLL_USB, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_USB, 0, 6, dpll_param_p->n); + + /* Force DPLL CLKOUT to stay active */ + sr32(CM_DIV_M2_DPLL_USB, 0, 32, 0x100); + sr32(CM_DIV_M2_DPLL_USB, 0, 5, dpll_param_p->m2); + sr32(CM_DIV_M2_DPLL_USB, 8, 1, 0x1); + sr32(CM_CLKDCOLDO_DPLL_USB, 8, 1, 0x1); + + /* Lock the usb dpll */ + sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_LOCK); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_USB, LDELAY); + + /* force enable the CLKDCOLDO clock */ + sr32(CM_CLKDCOLDO_DPLL_USB, 0, 32, 0x100); + + return; +} + +static void configure_core_dpll(clk_index) +{ + dpll_param *dpll_param_p; + + /* Get the sysclk speed from cm_sys_clksel + * Set it to 38.4 MHz, in case ROM code is bypassed + */ + if (!clk_index) + return; + + /* CORE_CLK=CORE_X2_CLK/2, L3_CLK=CORE_CLK/2, L4_CLK=L3_CLK/2 */ + sr32(CM_CLKSEL_CORE, 0, 32, 0x110); + + /* Unlock the CORE dpll */ + sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_CORE, LDELAY); + + /* Program Core DPLL */ + if(omap_revision() == OMAP4430_ES1_0) + dpll_param_p = &core_dpll_param_l3_190[clk_index]; + else if(omap_revision() == OMAP4430_ES2_0) + dpll_param_p = &core_dpll_param[clk_index]; + else if(omap_revision() == OMAP4430_ES2_1) + dpll_param_p = &core_dpll_param_ddr400[clk_index]; + + /* Disable autoidle */ + sr32(CM_AUTOIDLE_DPLL_CORE, 0, 3, 0x0); + + sr32(CM_CLKSEL_DPLL_CORE, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_CORE, 0, 6, dpll_param_p->n); + sr32(CM_DIV_M2_DPLL_CORE, 0, 5, dpll_param_p->m2); + sr32(CM_DIV_M3_DPLL_CORE, 0, 5, dpll_param_p->m3); + sr32(CM_DIV_M4_DPLL_CORE, 0, 5, dpll_param_p->m4); + sr32(CM_DIV_M5_DPLL_CORE, 0, 5, dpll_param_p->m5); + sr32(CM_DIV_M6_DPLL_CORE, 0, 5, dpll_param_p->m6); + sr32(CM_DIV_M7_DPLL_CORE, 0, 5, dpll_param_p->m7); + + if(omap_revision() == OMAP4430_ES1_0) + { + /* Do this only on ES1.0 */ + sr32(CM_DIV_M2_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M3_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M4_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M5_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M6_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M7_DPLL_CORE, 8, 1, 0x1); + } + + + /* Lock the core dpll */ + sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_LOCK); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_CORE, LDELAY); + + return; +} + + +void configure_core_dpll_no_lock(void) +{ + dpll_param *dpll_param_p; + u32 clk_index; + + /* Get the sysclk speed from cm_sys_clksel + * Set it to 38.4 MHz, in case ROM code is bypassed + */ + __raw_writel(0x7,CM_SYS_CLKSEL); + clk_index = 7; + + clk_index = clk_index - 1; + /* CORE_CLK=CORE_X2_CLK/2, L3_CLK=CORE_CLK/2, L4_CLK=L3_CLK/2 */ + sr32(CM_CLKSEL_CORE, 0, 32, 0x110); + + /* Unlock the CORE dpll */ + sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_MN_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_DPLL_CORE, LDELAY); + + /* Program Core DPLL */ + if(omap_revision() == OMAP4430_ES1_0) + dpll_param_p = &core_dpll_param_l3_190[clk_index]; + else if(omap_revision() == OMAP4430_ES2_0) + dpll_param_p = &core_dpll_param[clk_index]; + else if(omap_revision() == OMAP4430_ES2_1) + dpll_param_p = &core_dpll_param_ddr400[clk_index]; + + /* Disable autoidle */ + sr32(CM_AUTOIDLE_DPLL_CORE, 0, 3, 0x0); + + sr32(CM_CLKSEL_DPLL_CORE, 8, 11, dpll_param_p->m); + sr32(CM_CLKSEL_DPLL_CORE, 0, 6, dpll_param_p->n); + sr32(CM_DIV_M2_DPLL_CORE, 0, 5, dpll_param_p->m2); + sr32(CM_DIV_M3_DPLL_CORE, 0, 5, dpll_param_p->m3); + sr32(CM_DIV_M4_DPLL_CORE, 0, 5, dpll_param_p->m4); + sr32(CM_DIV_M5_DPLL_CORE, 0, 5, dpll_param_p->m5); + sr32(CM_DIV_M6_DPLL_CORE, 0, 5, dpll_param_p->m6); + sr32(CM_DIV_M7_DPLL_CORE, 0, 5, dpll_param_p->m7); + +// if(omap_revision() == OMAP4430_ES1_0) +// { + /* Do this only on ES1.0 */ + sr32(CM_DIV_M2_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M3_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M4_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M5_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M6_DPLL_CORE, 8, 1, 0x1); + sr32(CM_DIV_M7_DPLL_CORE, 8, 1, 0x1); +// } + + return; +} + +void lock_core_dpll(void) +{ + /* Lock the core dpll */ + sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_LOCK); + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_CORE, LDELAY); + + return; +} + +void lock_core_dpll_shadow(void) +{ + dpll_param *dpll_param_p; + /* Lock the core dpll using freq update method */ + *(volatile int*)0x4A004120 = 10; //(CM_CLKMODE_DPLL_CORE) + + if(omap_revision() == OMAP4430_ES1_0) + dpll_param_p = &core_dpll_param_l3_190[6]; + else if(omap_revision() == OMAP4430_ES2_0) + dpll_param_p = &core_dpll_param[6]; + else if(omap_revision() == OMAP4430_ES2_1) + dpll_param_p = &core_dpll_param_ddr400[6]; + + /* CM_SHADOW_FREQ_CONFIG1: DLL_OVERRIDE = 1(hack), DLL_RESET = 1, + * DPLL_CORE_M2_DIV =1, DPLL_CORE_DPLL_EN = 0x7, FREQ_UPDATE = 1 + */ + *(volatile int*)0x4A004260 = 0x70D | (dpll_param_p->m2 << 11); + + /* Wait for Freq_Update to get cleared: CM_SHADOW_FREQ_CONFIG1 */ + while( ( (*(volatile int*)0x4A004260) & 0x1) == 0x1 ); + + /* Wait for DPLL to Lock : CM_IDLEST_DPLL_CORE */ + wait_on_value(BIT0, 1, CM_IDLEST_DPLL_CORE, LDELAY); + //lock_core_dpll(); + + return; +} + +static void enable_all_clocks(void) +{ + volatile int regvalue = 0; + + /* Enable Ducati clocks */ + sr32(CM_DUCATI_DUCATI_CLKCTRL, 0, 32, 0x1); + sr32(CM_DUCATI_CLKSTCTRL, 0, 32, 0x2); + + wait_on_value(BIT8, BIT8, CM_DUCATI_CLKSTCTRL, LDELAY); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_DUCATI_DUCATI_CLKCTRL, LDELAY); + + /* Enable ivahd and sl2 clocks */ + sr32(IVAHD_IVAHD_CLKCTRL, 0, 32, 0x1); + sr32(IVAHD_SL2_CLKCTRL, 0, 32, 0x1); + sr32(IVAHD_CLKSTCTRL, 0, 32, 0x2); + + wait_on_value(BIT8, BIT8, IVAHD_CLKSTCTRL, LDELAY); + + /* wait for ivahd to become accessible */ + //wait_on_value(BIT18|BIT17|BIT16, 0, IVAHD_IVAHD_CLKCTRL, LDELAY); + /* wait for sl2 to become accessible */ + //wait_on_value(BIT17|BIT16, 0, IVAHD_SL2_CLKCTRL, LDELAY); + + /* Enable Tesla clocks */ + sr32(DSP_DSP_CLKCTRL, 0, 32, 0x1); + sr32(DSP_CLKSTCTRL, 0, 32, 0x2); + + wait_on_value(BIT8, BIT8, DSP_CLKSTCTRL, LDELAY); + + /* wait for tesla to become accessible */ + //wait_on_value(BIT18|BIT17|BIT16, 0, DSP_DSP_CLKCTRL, LDELAY); + + /* TODO: Some hack needed by MM: Clean this */ + #if 0 /* Doesn't work on some Zebu */ + *(volatile int*)0x4a306910 = 0x00000003; + *(volatile int*)0x550809a0 = 0x00000001; + *(volatile int*)0x55080a20 = 0x00000007; + #endif + + /* ABE clocks */ + sr32(CM1_ABE_CLKSTCTRL, 0, 32, 0x3); + sr32(CM1_ABE_AESS_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM1_ABE_AESS_CLKCTRL, LDELAY); + sr32(CM1_ABE_PDM_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_PDM_CLKCTRL, LDELAY); + sr32(CM1_ABE_DMIC_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_DMIC_CLKCTRL, LDELAY); + sr32(CM1_ABE_MCASP_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCASP_CLKCTRL, LDELAY); + sr32(CM1_ABE_MCBSP1_CLKCTRL, 0, 32, 0x08000002); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCBSP1_CLKCTRL, LDELAY); + sr32(CM1_ABE_MCBSP2_CLKCTRL, 0, 32, 0x08000002); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCBSP2_CLKCTRL, LDELAY); + sr32(CM1_ABE_MCBSP3_CLKCTRL, 0, 32, 0x08000002); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCBSP3_CLKCTRL, LDELAY); + sr32(CM1_ABE_SLIMBUS_CLKCTRL, 0, 32, 0xf02); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_SLIMBUS_CLKCTRL, LDELAY); + sr32(CM1_ABE_TIMER5_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER5_CLKCTRL, LDELAY); + sr32(CM1_ABE_TIMER6_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER6_CLKCTRL, LDELAY); + sr32(CM1_ABE_TIMER7_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER7_CLKCTRL, LDELAY); + sr32(CM1_ABE_TIMER8_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER8_CLKCTRL, LDELAY); + sr32(CM1_ABE_WDT3_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT17|BIT16, 0, CM1_ABE_WDT3_CLKCTRL, LDELAY); + /* Disable sleep transitions */ + sr32(CM1_ABE_CLKSTCTRL, 0, 32, 0x0); + + /* L4PER clocks */ + sr32(CM_L4PER_CLKSTCTRL, 0, 32, 0x2); + sr32(CM_L4PER_DMTIMER10_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER10_CLKCTRL, LDELAY); + sr32(CM_L4PER_DMTIMER11_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER11_CLKCTRL, LDELAY); + sr32(CM_L4PER_DMTIMER2_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER2_CLKCTRL, LDELAY); + sr32(CM_L4PER_DMTIMER3_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER3_CLKCTRL, LDELAY); + sr32(CM_L4PER_DMTIMER4_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER4_CLKCTRL, LDELAY); + sr32(CM_L4PER_DMTIMER9_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER9_CLKCTRL, LDELAY); + + /* GPIO clocks */ + sr32(CM_L4PER_GPIO2_CLKCTRL, 0 ,32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO2_CLKCTRL, LDELAY); + sr32(CM_L4PER_GPIO3_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO3_CLKCTRL, LDELAY); + sr32(CM_L4PER_GPIO4_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO4_CLKCTRL, LDELAY); + sr32(CM_L4PER_GPIO5_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO5_CLKCTRL, LDELAY); + sr32(CM_L4PER_GPIO6_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO6_CLKCTRL, LDELAY); + + sr32(CM_L4PER_HDQ1W_CLKCTRL, 0, 32, 0x2); + + /* I2C clocks */ + sr32(CM_L4PER_I2C1_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C1_CLKCTRL, LDELAY); + sr32(CM_L4PER_I2C2_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C2_CLKCTRL, LDELAY); + sr32(CM_L4PER_I2C3_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C3_CLKCTRL, LDELAY); + sr32(CM_L4PER_I2C4_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C4_CLKCTRL, LDELAY); + + sr32(CM_L4PER_MCBSP4_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCBSP4_CLKCTRL, LDELAY); + + /* MCSPI clocks */ + sr32(CM_L4PER_MCSPI1_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI1_CLKCTRL, LDELAY); + sr32(CM_L4PER_MCSPI2_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI2_CLKCTRL, LDELAY); + sr32(CM_L4PER_MCSPI3_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI3_CLKCTRL, LDELAY); + sr32(CM_L4PER_MCSPI4_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI4_CLKCTRL, LDELAY); + + /* MMC clocks */ + sr32(CM_L3INIT_HSMMC1_CLKCTRL, 0, 2, 0x2); + sr32(CM_L3INIT_HSMMC1_CLKCTRL, 24, 1, 0x1); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSMMC1_CLKCTRL, LDELAY); + sr32(CM_L3INIT_HSMMC2_CLKCTRL, 0, 2, 0x2); + sr32(CM_L3INIT_HSMMC2_CLKCTRL, 24, 1, 0x1); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSMMC2_CLKCTRL, LDELAY); + sr32(CM_L4PER_MMCSD3_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT18|BIT17|BIT16, 0, CM_L4PER_MMCSD3_CLKCTRL, LDELAY); + sr32(CM_L4PER_MMCSD4_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT18|BIT17|BIT16, 0, CM_L4PER_MMCSD4_CLKCTRL, LDELAY); + sr32(CM_L4PER_MMCSD5_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_MMCSD5_CLKCTRL, LDELAY); + + /* UART clocks */ + sr32(CM_L4PER_UART1_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART1_CLKCTRL, LDELAY); + sr32(CM_L4PER_UART2_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART2_CLKCTRL, LDELAY); + sr32(CM_L4PER_UART3_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART3_CLKCTRL, LDELAY); + sr32(CM_L4PER_UART4_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART4_CLKCTRL, LDELAY); + + /* WKUP clocks */ + sr32(CM_WKUP_GPIO1_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_WKUP_GPIO1_CLKCTRL, LDELAY); + sr32(CM_WKUP_TIMER1_CLKCTRL, 0, 32, 0x01000002); + wait_on_value(BIT17|BIT16, 0, CM_WKUP_TIMER1_CLKCTRL, LDELAY); + + sr32(CM_WKUP_KEYBOARD_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_WKUP_KEYBOARD_CLKCTRL, LDELAY); + + sr32(CM_SDMA_CLKSTCTRL, 0, 32, 0x0); + sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x3); + sr32(CM_MEMIF_EMIF_1_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_MEMIF_EMIF_1_CLKCTRL, LDELAY); + sr32(CM_MEMIF_EMIF_2_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_MEMIF_EMIF_2_CLKCTRL, LDELAY); + sr32(CM_D2D_CLKSTCTRL, 0, 32, 0x3); + sr32(CM_L3_2_GPMC_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L3_2_GPMC_CLKCTRL, LDELAY); + sr32(CM_L3INSTR_L3_3_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L3INSTR_L3_3_CLKCTRL, LDELAY); + sr32(CM_L3INSTR_L3_INSTR_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L3INSTR_L3_INSTR_CLKCTRL, LDELAY); + sr32(CM_L3INSTR_OCP_WP1_CLKCTRL, 0, 32, 0x1); + wait_on_value(BIT17|BIT16, 0, CM_L3INSTR_OCP_WP1_CLKCTRL, LDELAY); + + /* WDT clocks */ + sr32(CM_WKUP_WDT2_CLKCTRL, 0, 32, 0x2); + wait_on_value(BIT17|BIT16, 0, CM_WKUP_WDT2_CLKCTRL, LDELAY); + + /* Enable Camera clocks */ + sr32(CM_CAM_CLKSTCTRL, 0, 32, 0x3); + sr32(CM_CAM_ISS_CLKCTRL, 0, 32, 0x102); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_CAM_ISS_CLKCTRL, LDELAY); + sr32(CM_CAM_FDIF_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_CAM_FDIF_CLKCTRL, LDELAY); + sr32(CM_CAM_CLKSTCTRL, 0, 32, 0x0); + + /* Enable DSS clocks */ + /* PM_DSS_PWRSTCTRL ON State and LogicState = 1 (Retention) */ + *(volatile int*)0x4A307100 = 0x7; //DSS_PRM + sr32(CM_DSS_CLKSTCTRL, 0, 32, 0x2); + sr32(CM_DSS_DSS_CLKCTRL, 0, 32, 0xf02); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_DSS_DSS_CLKCTRL, LDELAY); + sr32(CM_DSS_DEISS_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_DSS_DEISS_CLKCTRL, LDELAY); + /* Check for DSS Clocks */ + while (((*(volatile int*)0x4A009100) & 0xF00) != 0xE00) + /* Set HW_AUTO transition mode */ + sr32(CM_DSS_CLKSTCTRL, 0, 32, 0x3); + + /* Enable SGX clocks */ + sr32(CM_SGX_CLKSTCTRL, 0, 32, 0x2); + sr32(CM_SGX_SGX_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_SGX_SGX_CLKCTRL, LDELAY); + /* Check for SGX FCLK and ICLK */ + while ( (*(volatile int*)0x4A009200) != 0x302 ); + //sr32(CM_SGX_CLKSTCTRL, 0, 32, 0x0); + /* Enable hsi/unipro/usb clocks */ + sr32(CM_L3INIT_HSI_CLKCTRL, 0, 32, 0x1); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSI_CLKCTRL, LDELAY); + sr32(CM_L3INIT_UNIPRO1_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_UNIPRO1_CLKCTRL, LDELAY); + sr32(CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSUSBHOST_CLKCTRL, LDELAY); + sr32(CM_L3INIT_HSUSBOTG_CLKCTRL, 0, 32, 0x1); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSUSBOTG_CLKCTRL, LDELAY); + sr32(CM_L3INIT_HSUSBTLL_CLKCTRL, 0, 32, 0x1); + //wait_on_value(BIT17|BIT16, 0, CM_L3INIT_HSUSBTLL_CLKCTRL, LDELAY); + sr32(CM_L3INIT_FSUSB_CLKCTRL, 0, 32, 0x2); + //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_FSUSB_CLKCTRL, LDELAY); + /* enable the 32K, 48M optional clocks and enable the module */ + sr32(CM_L3INIT_USBPHY_CLKCTRL, 0, 32, 0x301); + //wait_on_value(BIT17|BIT16, 0, CM_L3INIT_USBPHY_CLKCTRL, LDELAY); + return; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 clk_index; + + /* Get the sysclk speed from cm_sys_clksel + * Set the CM_SYS_CLKSEL in case ROM code has not set + */ + __raw_writel(0x7,CM_SYS_CLKSEL); + clk_index = readl(CM_SYS_CLKSEL); + if (!clk_index) + return; /* Sys clk uninitialized */ + /* Core DPLL is locked using FREQ update method */ + /* configure_core_dpll(clk_index - 1); */ + + /* Configure all DPLL's at 100% OPP */ + configure_mpu_dpll(clk_index - 1); + configure_iva_dpll(clk_index - 1); + configure_per_dpll(clk_index - 1); + configure_abe_dpll(clk_index - 1); + configure_usb_dpll(clk_index - 1); + +#ifdef CONFIG_OMAP4_SDC + /* Enable all clocks */ + enable_all_clocks(); +#endif + + return; +} diff --git a/board/omap4430panda/config.mk b/board/omap4430panda/config.mk new file mode 100644 index 0000000..01173eb --- /dev/null +++ b/board/omap4430panda/config.mk @@ -0,0 +1,21 @@ +# +# (C) Copyright 2006-2009 +# Texas Instruments, <www.ti.com> +# +# SDP4430 board uses ARM-CortexA9 cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x40304350 + + +# Handy to get symbols to debug ROM version. +#TEXT_BASE = 0x0 +#TEXT_BASE = 0x08000000 +#TEXT_BASE = 0x04000000 diff --git a/board/omap4430panda/omap4430panda.c b/board/omap4430panda/omap4430panda.c new file mode 100644 index 0000000..5695733 --- /dev/null +++ b/board/omap4430panda/omap4430panda.c @@ -0,0 +1,1235 @@ +/* + * (C) Copyright 2004-2009 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> +#include <i2c.h> +#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY) +#include <linux/mtd/nand_legacy.h> +#endif + +/* EMIF and DMM registers */ +#define EMIF1_BASE 0x4c000000 +#define EMIF2_BASE 0x4d000000 +#define DMM_BASE 0x4e000000 +/* EMIF */ +#define EMIF_MOD_ID_REV 0x0000 +#define EMIF_STATUS 0x0004 +#define EMIF_SDRAM_CONFIG 0x0008 +#define EMIF_LPDDR2_NVM_CONFIG 0x000C +#define EMIF_SDRAM_REF_CTRL 0x0010 +#define EMIF_SDRAM_REF_CTRL_SHDW 0x0014 +#define EMIF_SDRAM_TIM_1 0x0018 +#define EMIF_SDRAM_TIM_1_SHDW 0x001C +#define EMIF_SDRAM_TIM_2 0x0020 +#define EMIF_SDRAM_TIM_2_SHDW 0x0024 +#define EMIF_SDRAM_TIM_3 0x0028 +#define EMIF_SDRAM_TIM_3_SHDW 0x002C +#define EMIF_LPDDR2_NVM_TIM 0x0030 +#define EMIF_LPDDR2_NVM_TIM_SHDW 0x0034 +#define EMIF_PWR_MGMT_CTRL 0x0038 +#define EMIF_PWR_MGMT_CTRL_SHDW 0x003C +#define EMIF_LPDDR2_MODE_REG_DATA 0x0040 +#define EMIF_LPDDR2_MODE_REG_CFG 0x0050 +#define EMIF_L3_CONFIG 0x0054 +#define EMIF_L3_CFG_VAL_1 0x0058 +#define EMIF_L3_CFG_VAL_2 0x005C +#define IODFT_TLGC 0x0060 +#define EMIF_PERF_CNT_1 0x0080 +#define EMIF_PERF_CNT_2 0x0084 +#define EMIF_PERF_CNT_CFG 0x0088 +#define EMIF_PERF_CNT_SEL 0x008C +#define EMIF_PERF_CNT_TIM 0x0090 +#define EMIF_READ_IDLE_CTRL 0x0098 +#define EMIF_READ_IDLE_CTRL_SHDW 0x009c +#define EMIF_ZQ_CONFIG 0x00C8 +#define EMIF_DDR_PHY_CTRL_1 0x00E4 +#define EMIF_DDR_PHY_CTRL_1_SHDW 0x00E8 +#define EMIF_DDR_PHY_CTRL_2 0x00EC + +#define DMM_LISA_MAP_0 0x0040 +#define DMM_LISA_MAP_1 0x0044 +#define DMM_LISA_MAP_2 0x0048 +#define DMM_LISA_MAP_3 0x004C + +#define MR0_ADDR 0 +#define MR1_ADDR 1 +#define MR2_ADDR 2 +#define MR4_ADDR 4 +#define MR10_ADDR 10 +#define MR16_ADDR 16 +#define REF_EN 0x40000000 +/* defines for MR1 */ +#define MR1_BL4 2 +#define MR1_BL8 3 +#define MR1_BL16 4 + +#define MR1_BT_SEQ 0 +#define BT_INT 1 + +#define MR1_WC 0 +#define MR1_NWC 1 + +#define MR1_NWR3 1 +#define MR1_NWR4 2 +#define MR1_NWR5 3 +#define MR1_NWR6 4 +#define MR1_NWR7 5 +#define MR1_NWR8 6 + +#define MR1_VALUE (MR1_NWR3 << 5) | (MR1_WC << 4) | (MR1_BT_SEQ << 3) \ + | (MR1_BL8 << 0) + +/* defines for MR2 */ +#define MR2_RL3_WL1 1 +#define MR2_RL4_WL2 2 +#define MR2_RL5_WL2 3 +#define MR2_RL6_WL3 4 + +/* defines for MR10 */ +#define MR10_ZQINIT 0xFF +#define MR10_ZQRESET 0xC3 +#define MR10_ZQCL 0xAB +#define MR10_ZQCS 0x56 + + +/* TODO: FREQ update method is not working so shadow registers programming + * is just for same of completeness. This would be safer if auto + * trasnitions are working + */ +#define FREQ_UPDATE_EMIF +/* EMIF Needs to be configured@19.2 MHz and shadow registers + * should be programmed for new OPP. + */ +/* Elpida 2x2Gbit */ +#define SDRAM_CONFIG_INIT 0x80800EB1 +#define DDR_PHY_CTRL_1_INIT 0x849FFFF5 +#define READ_IDLE_CTRL 0x000501FF +#define PWR_MGMT_CTRL 0x4000000f +#define PWR_MGMT_CTRL_OPP100 0x4000000f +#define ZQ_CONFIG 0x500b3215 + +#define CS1_MR(mr) ((mr) | 0x80000000) +struct ddr_regs{ + u32 tim1; + u32 tim2; + u32 tim3; + u32 phy_ctrl_1; + u32 ref_ctrl; + u32 config_init; + u32 config_final; + u32 zq_config; + u8 mr1; + u8 mr2; +}; +const struct ddr_regs ddr_regs_380_mhz = { + .tim1 = 0x10cb061a, + .tim2 = 0x20350d52, + .tim3 = 0x00b1431f, + .phy_ctrl_1 = 0x849FF408, + .ref_ctrl = 0x000005ca, + .config_init = 0x80000eb1, + .config_final = 0x80001ab1, + .zq_config = 0x500b3215, + .mr1 = 0x83, + .mr2 = 0x4 +}; + +/* + * Unused timings - but we may need them later + * Keep them commented + */ +#if 0 +const struct ddr_regs ddr_regs_400_mhz = { + .tim1 = 0x10eb065a, + .tim2 = 0x20370dd2, + .tim3 = 0x00b1c33f, + .phy_ctrl_1 = 0x849FF408, + .ref_ctrl = 0x00000618, + .config_init = 0x80000eb1, + .config_final = 0x80001ab1, + .zq_config = 0x500b3215, + .mr1 = 0x83, + .mr2 = 0x4 +}; + +const struct ddr_regs ddr_regs_200_mhz = { + .tim1 = 0x08648309, + .tim2 = 0x101b06ca, + .tim3 = 0x0048a19f, + .phy_ctrl_1 = 0x849FF405, + .ref_ctrl = 0x0000030c, + .config_init = 0x80000eb1, + .config_final = 0x80000eb1, + .zq_config = 0x500b3215, + .mr1 = 0x23, + .mr2 = 0x1 +}; +#endif + +const struct ddr_regs ddr_regs_200_mhz_2cs = { + .tim1 = 0x08648309, + .tim2 = 0x101b06ca, + .tim3 = 0x0048a19f, + .phy_ctrl_1 = 0x849FF405, + .ref_ctrl = 0x0000030c, + .config_init = 0x80000eb9, + .config_final = 0x80000eb9, + .zq_config = 0xD00b3215, + .mr1 = 0x23, + .mr2 = 0x1 +}; + +const struct ddr_regs ddr_regs_400_mhz_2cs = { + /* tRRD changed from 10ns to 12.5ns because of the tFAW requirement*/ + .tim1 = 0x10eb0662, + .tim2 = 0x20370dd2, + .tim3 = 0x00b1c33f, + .phy_ctrl_1 = 0x849FF408, + .ref_ctrl = 0x00000618, + .config_init = 0x80000eb9, + .config_final = 0x80001ab9, + .zq_config = 0xD00b3215, + .mr1 = 0x83, + .mr2 = 0x4 +}; + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b" : "=r" (loops) : "0"(loops)); +} + + +void big_delay(unsigned int count) +{ + int i; + for (i=0; i<count; i++) + delay(1); +} + +/* TODO: FREQ update method is not working so shadow registers programming + * is just for same of completeness. This would be safer if auto + * trasnitions are working + */ +static int emif_config(unsigned int base) +{ + unsigned int reg_value, rev; + const struct ddr_regs *ddr_regs; + rev = omap_revision(); + + if(rev == OMAP4430_ES1_0) + ddr_regs = &ddr_regs_380_mhz; + else if (rev == OMAP4430_ES2_0) + ddr_regs = &ddr_regs_200_mhz_2cs; + else if (rev == OMAP4430_ES2_1) + ddr_regs = &ddr_regs_400_mhz_2cs; + /* + * set SDRAM CONFIG register + * EMIF_SDRAM_CONFIG[31:29] REG_SDRAM_TYPE = 4 for LPDDR2-S4 + * EMIF_SDRAM_CONFIG[28:27] REG_IBANK_POS = 0 + * EMIF_SDRAM_CONFIG[13:10] REG_CL = 3 + * EMIF_SDRAM_CONFIG[6:4] REG_IBANK = 3 - 8 banks + * EMIF_SDRAM_CONFIG[3] REG_EBANK = 0 - CS0 + * EMIF_SDRAM_CONFIG[2:0] REG_PAGESIZE = 2 - 512- 9 column + * JDEC specs - S4-2Gb --8 banks -- R0-R13, C0-c8 + */ + *(volatile int*)(base + EMIF_LPDDR2_NVM_CONFIG) &= 0xBFFFFFFF; + *(volatile int*)(base + EMIF_SDRAM_CONFIG) = ddr_regs->config_init; + + /* PHY control values */ + *(volatile int*)(base + EMIF_DDR_PHY_CTRL_1) = DDR_PHY_CTRL_1_INIT; + *(volatile int*)(base + EMIF_DDR_PHY_CTRL_1_SHDW)= ddr_regs->phy_ctrl_1; + + /* + * EMIF_READ_IDLE_CTRL + */ + *(volatile int*)(base + EMIF_READ_IDLE_CTRL) = READ_IDLE_CTRL; + *(volatile int*)(base + EMIF_READ_IDLE_CTRL_SHDW) = READ_IDLE_CTRL; + + /* + * EMIF_SDRAM_TIM_1 + */ + *(volatile int*)(base + EMIF_SDRAM_TIM_1) = ddr_regs->tim1; + *(volatile int*)(base + EMIF_SDRAM_TIM_1_SHDW) = ddr_regs->tim1; + + /* + * EMIF_SDRAM_TIM_2 + */ + *(volatile int*)(base + EMIF_SDRAM_TIM_2) = ddr_regs->tim2; + *(volatile int*)(base + EMIF_SDRAM_TIM_2_SHDW) = ddr_regs->tim2; + + /* + * EMIF_SDRAM_TIM_3 + */ + *(volatile int*)(base + EMIF_SDRAM_TIM_3) = ddr_regs->tim3; + *(volatile int*)(base + EMIF_SDRAM_TIM_3_SHDW) = ddr_regs->tim3; + + *(volatile int*)(base + EMIF_ZQ_CONFIG) = ddr_regs->zq_config; + /* + * EMIF_PWR_MGMT_CTRL + */ + //*(volatile int*)(base + EMIF_PWR_MGMT_CTRL) = PWR_MGMT_CTRL; + //*(volatile int*)(base + EMIF_PWR_MGMT_CTRL_SHDW) = PWR_MGMT_CTRL_OPP100; + /* + * poll MR0 register (DAI bit) + * REG_CS[31] = 0 -- Mode register command to CS0 + * REG_REFRESH_EN[30] = 1 -- Refresh enable after MRW + * REG_ADDRESS[7:0] = 00 -- Refresh enable after MRW + */ + + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = MR0_ADDR; + do { + reg_value = *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA); + } while ((reg_value & 0x1) != 0); + + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR0_ADDR); + do { + reg_value = *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA); + } while ((reg_value & 0x1) != 0); + + + /* set MR10 register */ + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR10_ADDR; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = MR10_ZQINIT; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR10_ADDR); + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = MR10_ZQINIT; + + /* wait for tZQINIT=1us */ + delay(10); + + /* set MR1 register */ + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR1_ADDR; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr1; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR1_ADDR); + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr1; + + + /* set MR2 register RL=6 for OPP100 */ + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR2_ADDR; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr2; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR2_ADDR); + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr2; + + /* Set SDRAM CONFIG register again here with final RL-WL value */ + *(volatile int*)(base + EMIF_SDRAM_CONFIG) = ddr_regs->config_final; + *(volatile int*)(base + EMIF_DDR_PHY_CTRL_1) = ddr_regs->phy_ctrl_1; + + /* + * EMIF_SDRAM_REF_CTRL + * refresh rate = DDR_CLK / reg_refresh_rate + * 3.9 uS = (400MHz) / reg_refresh_rate + */ + *(volatile int*)(base + EMIF_SDRAM_REF_CTRL) = ddr_regs->ref_ctrl; + *(volatile int*)(base + EMIF_SDRAM_REF_CTRL_SHDW) = ddr_regs->ref_ctrl; + + /* set MR16 register */ + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR16_ADDR | REF_EN; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = 0; + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = + CS1_MR(MR16_ADDR | REF_EN); + *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = 0; + /* LPDDR2 init complete */ + +} +/***************************************** + * Routine: ddr_init + * Description: Configure DDR + * EMIF1 -- CS0 -- DDR1 (256 MB) + * EMIF2 -- CS0 -- DDR2 (256 MB) + *****************************************/ +static void ddr_init(void) +{ + unsigned int base_addr, rev; + rev = omap_revision(); + + if (rev == OMAP4430_ES1_0) + { + /* Configurte the Control Module DDRIO device */ + __raw_writel(0x1c1c1c1c, 0x4A100638); + __raw_writel(0x1c1c1c1c, 0x4A10063c); + __raw_writel(0x1c1c1c1c, 0x4A100640); + __raw_writel(0x1c1c1c1c, 0x4A100648); + __raw_writel(0x1c1c1c1c, 0x4A10064c); + __raw_writel(0x1c1c1c1c, 0x4A100650); + /* LPDDR2IO set to NMOS PTV */ + __raw_writel(0x00ffc000, 0x4A100704); + } else if (rev == OMAP4430_ES2_0) { + __raw_writel(0x9e9e9e9e, 0x4A100638); + __raw_writel(0x9e9e9e9e, 0x4A10063c); + __raw_writel(0x9e9e9e9e, 0x4A100640); + __raw_writel(0x9e9e9e9e, 0x4A100648); + __raw_writel(0x9e9e9e9e, 0x4A10064c); + __raw_writel(0x9e9e9e9e, 0x4A100650); + /* LPDDR2IO set to NMOS PTV */ + __raw_writel(0x00ffc000, 0x4A100704); + } + + /* + * DMM Configuration + */ + + /* Both EMIFs 128 byte interleaved*/ + if (rev == OMAP4430_ES1_0) + *(volatile int*)(DMM_BASE + DMM_LISA_MAP_0) = 0x80540300; + else + *(volatile int*)(DMM_BASE + DMM_LISA_MAP_0) = 0x80640300; + + /* EMIF2 only at 0x90000000 */ + //*(volatile int*)(DMM_BASE + DMM_LISA_MAP_1) = 0x90400200; + + *(volatile int*)(DMM_BASE + DMM_LISA_MAP_2) = 0x00000000; + *(volatile int*)(DMM_BASE + DMM_LISA_MAP_3) = 0xFF020100; + + /* DDR needs to be initialised @ 19.2 MHz + * So put core DPLL in bypass mode + * Configure the Core DPLL but don't lock it + */ + configure_core_dpll_no_lock(); + + /* No IDLE: BUG in SDC */ + //sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x2); + //while(((*(volatile int*)CM_MEMIF_CLKSTCTRL) & 0x700) != 0x700); + *(volatile int*)(EMIF1_BASE + EMIF_PWR_MGMT_CTRL) = 0x0; + *(volatile int*)(EMIF2_BASE + EMIF_PWR_MGMT_CTRL) = 0x0; + + base_addr = EMIF1_BASE; + emif_config(base_addr); + + /* Configure EMIF24D */ + base_addr = EMIF2_BASE; + emif_config(base_addr); + /* Lock Core using shadow CM_SHADOW_FREQ_CONFIG1 */ + lock_core_dpll_shadow(); + /* TODO: SDC needs few hacks to get DDR freq update working */ + + /* Set DLL_OVERRIDE = 0 */ + *(volatile int*)CM_DLL_CTRL = 0x0; + + delay(200); + + /* Check for DDR PHY ready for EMIF1 & EMIF2 */ + while((((*(volatile int*)(EMIF1_BASE + EMIF_STATUS))&(0x04)) != 0x04) \ + || (((*(volatile int*)(EMIF2_BASE + EMIF_STATUS))&(0x04)) != 0x04)); + + /* Reprogram the DDR PYHY Control register */ + /* PHY control values */ + + sr32(CM_MEMIF_EMIF_1_CLKCTRL, 0, 32, 0x1); + sr32(CM_MEMIF_EMIF_2_CLKCTRL, 0, 32, 0x1); + + /* Put the Core Subsystem PD to ON State */ + + /* No IDLE: BUG in SDC */ + //sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x2); + //while(((*(volatile int*)CM_MEMIF_CLKSTCTRL) & 0x700) != 0x700); + *(volatile int*)(EMIF1_BASE + EMIF_PWR_MGMT_CTRL) = 0x80000000; + *(volatile int*)(EMIF2_BASE + EMIF_PWR_MGMT_CTRL) = 0x80000000; + + /* SYSTEM BUG: + * In n a specific situation, the OCP interface between the DMM and + * EMIF may hang. + * 1. A TILER port is used to perform 2D burst writes of + * width 1 and height 8 + * 2. ELLAn port is used to perform reads + * 3. All accesses are routed to the same EMIF controller + * + * Work around to avoid this issue REG_SYS_THRESH_MAX value should + * be kept higher than default 0x7. As per recommondation 0x0A will + * be used for better performance with REG_LL_THRESH_MAX = 0x00 + */ + if (rev == OMAP4430_ES1_0) { + *(volatile int*)(EMIF1_BASE + EMIF_L3_CONFIG) = 0x0A0000FF; + *(volatile int*)(EMIF2_BASE + EMIF_L3_CONFIG) = 0x0A0000FF; + } + + /* + * DMM : DMM_LISA_MAP_0(Section_0) + * [31:24] SYS_ADDR 0x80 + * [22:20] SYS_SIZE 0x7 - 2Gb + * [19:18] SDRC_INTLDMM 0x1 - 128 byte + * [17:16] SDRC_ADDRSPC 0x0 + * [9:8] SDRC_MAP 0x3 + * [7:0] SDRC_ADDR 0X0 + */ + reset_phy(EMIF1_BASE); + reset_phy(EMIF2_BASE); + + *((volatile int *)0x80000000) = 0; + *((volatile int *)0x80000080) = 0; + //*((volatile int *)0x90000000) = 0; +} +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + return 0; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + /* no nand, so return GPMC_NONE */ + return GPMC_NONE; +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock_mem(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP/EMU(special) type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + return; +} + + +#if defined(CONFIG_MPU_600) || defined(CONFIG_MPU_1000) +static scale_vcores(void) +{ + unsigned int rev = omap_revision(); + /* For VC bypass only VCOREx_CGF_FORCE is necessary and + * VCOREx_CFG_VOLTAGE changes can be discarded + */ + /* PRM_VC_CFG_I2C_MODE */ + *(volatile int*)(0x4A307BA8) = 0x0; + /* PRM_VC_CFG_I2C_CLK */ + *(volatile int*)(0x4A307BAC) = 0x6026; + + /* set VCORE1 force VSEL */ + /* PRM_VC_VAL_BYPASS) */ + if(rev == OMAP4430_ES1_0) + *(volatile int*)(0x4A307BA0) = 0x3B5512; + else + *(volatile int*)(0x4A307BA0) = 0x3A5512; + + *(volatile int*)(0x4A307BA0) |= 0x1000000; + while((*(volatile int*)(0x4A307BA0)) & 0x1000000); + + /* PRM_IRQSTATUS_MPU */ + *(volatile int*)(0x4A306010) = *(volatile int*)(0x4A306010); + + + /* FIXME: set VCORE2 force VSEL, Check the reset value */ + /* PRM_VC_VAL_BYPASS) */ + if(rev == OMAP4430_ES1_0) + *(volatile int*)(0x4A307BA0) = 0x315B12; + else + *(volatile int*)(0x4A307BA0) = 0x295B12; + *(volatile int*)(0x4A307BA0) |= 0x1000000; + while((*(volatile int*)(0x4A307BA0)) & 0x1000000); + + /* PRM_IRQSTATUS_MPU */ + *(volatile int*)(0x4A306010) = *(volatile int*)(0x4A306010); + + /*/set VCORE3 force VSEL */ + /* PRM_VC_VAL_BYPASS */ + if(rev == OMAP4430_ES1_0) + *(volatile int*)(0x4A307BA0) = 0x316112; + else if (rev == OMAP4430_ES2_0) + *(volatile int*)(0x4A307BA0) = 0x296112; + else if (rev == OMAP4430_ES2_1) + *(volatile int*)(0x4A307BA0) = 0x2A6112; + *(volatile int*)(0x4A307BA0) |= 0x1000000; + while((*(volatile int*)(0x4A307BA0)) & 0x1000000); + + /* PRM_IRQSTATUS_MPU */ + *(volatile int*)(0x4A306010) = *(volatile int*)(0x4A306010); + +} +#endif + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called path is with SRAM stack. + **********************************************************/ + +void s_init(void) +{ + unsigned int rev = omap_revision(); + + set_muxconf_regs(); + delay(100); + + /* Writing to AuxCR in U-boot using SMI for GP/EMU DEV */ + /* Currently SMI in Kernel on ES2 devices seems to have an isse + * Once that is resolved, we can postpone this config to kernel + */ + //setup_auxcr(get_device_type(), external_boot); + + ddr_init(); + +/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */ +#if defined(CONFIG_MPU_600) || defined(CONFIG_MPU_1000) + scale_vcores(); +#endif + prcm_init(); + + if(rev != OMAP4430_ES1_0) { + if (__raw_readl(0x4805D138) & (1<<22)) { + sr32(0x4A30a31C, 8, 1, 0x1); /* enable software ioreq */ + sr32(0x4A30a31C, 1, 2, 0x0); /* set for sys_clk (38.4MHz) */ + sr32(0x4A30a31C, 16, 4, 0x1); /* set divisor to 2 */ + sr32(0x4A30a110, 0, 1, 0x1); /* set the clock source to active */ + sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */ + } + else { + sr32(0x4A30a314, 8, 1, 0x1); /* enable software ioreq */ + sr32(0x4A30a314, 1, 2, 0x2); /* set for PER_DPLL */ + sr32(0x4A30a314, 16, 4, 0xf); /* set divisor to 16 */ + sr32(0x4A30a110, 0, 1, 0x1); /* set the clock source to active */ + sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */ + } + } + +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r(void) +{ + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/******************************************************************* + * Routine:ether_init + * Description: take the Ethernet controller out of reset and wait + * for the EEPROM load to complete. + ******************************************************************/ + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +#define OMAP44XX_WKUP_CTRL_BASE 0x4A31E000 +#if 1 +#define M0_SAFE M0 +#define M1_SAFE M1 +#define M2_SAFE M2 +#define M4_SAFE M4 +#define M7_SAFE M7 +#define M3_SAFE M3 +#define M5_SAFE M5 +#define M6_SAFE M6 +#else +#define M0_SAFE M7 +#define M1_SAFE M7 +#define M2_SAFE M7 +#define M4_SAFE M7 +#define M7_SAFE M7 +#define M3_SAFE M7 +#define M5_SAFE M7 +#define M6_SAFE M7 +#endif +#define MV(OFFSET, VALUE)\ + __raw_writew((VALUE), OMAP44XX_CTRL_BASE + (OFFSET)); +#define MV1(OFFSET, VALUE)\ + __raw_writew((VALUE), OMAP44XX_WKUP_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +#define WK(x) (CONTROL_WKUP_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ + +#define MUX_DEFAULT_OMAP4() \ + MV(CP(GPMC_AD0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat0 */ \ + MV(CP(GPMC_AD1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat1 */ \ + MV(CP(GPMC_AD2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat2 */ \ + MV(CP(GPMC_AD3) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat3 */ \ + MV(CP(GPMC_AD4) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat4 */ \ + MV(CP(GPMC_AD5) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat5 */ \ + MV(CP(GPMC_AD6) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat6 */ \ + MV(CP(GPMC_AD7) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat7 */ \ + MV(CP(GPMC_AD8) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_32 */ \ + MV(CP(GPMC_AD9) , ( PTU | IEN | M3)) /* gpio_33 */ \ + MV(CP(GPMC_AD10) , ( PTU | IEN | M3)) /* gpio_34 */ \ + MV(CP(GPMC_AD11) , ( PTU | IEN | M3)) /* gpio_35 */ \ + MV(CP(GPMC_AD12) , ( PTU | IEN | M3)) /* gpio_36 */ \ + MV(CP(GPMC_AD13) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_37 */ \ + MV(CP(GPMC_AD14) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_38 */ \ + MV(CP(GPMC_AD15) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_39 */ \ + MV(CP(GPMC_A16) , ( M3)) /* gpio_40 */ \ + MV(CP(GPMC_A17) , ( PTD | M3)) /* gpio_41 */ \ + MV(CP(GPMC_A18) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row6 */ \ + MV(CP(GPMC_A19) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row7 */ \ + MV(CP(GPMC_A20) , ( IEN | M3)) /* gpio_44 */ \ + MV(CP(GPMC_A21) , ( M3)) /* gpio_45 */ \ + MV(CP(GPMC_A22) , ( M3)) /* gpio_46 */ \ + MV(CP(GPMC_A23) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col7 */ \ + MV(CP(GPMC_A24) , ( PTD | M3)) /* gpio_48 */ \ + MV(CP(GPMC_A25) , ( PTD | M3)) /* gpio_49 */ \ + MV(CP(GPMC_NCS0) , ( M3)) /* gpio_50 */ \ + MV(CP(GPMC_NCS1) , ( IEN | M3)) /* gpio_51 */ \ + MV(CP(GPMC_NCS2) , ( IEN | M3)) /* gpio_52 */ \ + MV(CP(GPMC_NCS3) , ( IEN | M3)) /* gpio_53 */ \ + MV(CP(GPMC_NWP) , ( M3)) /* gpio_54 */ \ + MV(CP(GPMC_CLK) , ( PTD | M3)) /* gpio_55 */ \ + MV(CP(GPMC_NADV_ALE) , ( M3)) /* gpio_56 */ \ + MV(CP(GPMC_NOE) , ( PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)) /* sdmmc2_clk */ \ + MV(CP(GPMC_NWE) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_cmd */ \ + MV(CP(GPMC_NBE0_CLE) , ( M3)) /* gpio_59 */ \ + MV(CP(GPMC_NBE1) , ( PTD | M3)) /* gpio_60 */ \ + MV(CP(GPMC_WAIT0) , ( PTU | IEN | M3)) /* gpio_61 */ \ + MV(CP(GPMC_WAIT1), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_62 */ \ + MV(CP(C2C_DATA11) , ( PTD | M3)) /* gpio_100 */ \ + MV(CP(C2C_DATA12) , ( PTD | IEN | M3)) /* gpio_101 */ \ + MV(CP(C2C_DATA13) , ( PTD | M3)) /* gpio_102 */ \ + MV(CP(C2C_DATA14) , ( M1)) /* dsi2_te0 */ \ + MV(CP(C2C_DATA15) , ( PTD | M3)) /* gpio_104 */ \ + MV(CP(HDMI_HPD) , ( M0)) /* hdmi_hpd */ \ + MV(CP(HDMI_CEC) , ( M0)) /* hdmi_cec */ \ + MV(CP(HDMI_DDC_SCL) , ( PTU | M0)) /* hdmi_ddc_scl */ \ + MV(CP(HDMI_DDC_SDA) , ( PTU | IEN | M0)) /* hdmi_ddc_sda */ \ + MV(CP(CSI21_DX0) , ( IEN | M0)) /* csi21_dx0 */ \ + MV(CP(CSI21_DY0) , ( IEN | M0)) /* csi21_dy0 */ \ + MV(CP(CSI21_DX1) , ( IEN | M0)) /* csi21_dx1 */ \ + MV(CP(CSI21_DY1) , ( IEN | M0)) /* csi21_dy1 */ \ + MV(CP(CSI21_DX2) , ( IEN | M0)) /* csi21_dx2 */ \ + MV(CP(CSI21_DY2) , ( IEN | M0)) /* csi21_dy2 */ \ + MV(CP(CSI21_DX3) , ( PTD | M7)) /* csi21_dx3 */ \ + MV(CP(CSI21_DY3) , ( PTD | M7)) /* csi21_dy3 */ \ + MV(CP(CSI21_DX4) , ( PTD | OFF_EN | OFF_PD | OFF_IN | M7)) /* csi21_dx4 */ \ + MV(CP(CSI21_DY4) , ( PTD | OFF_EN | OFF_PD | OFF_IN | M7)) /* csi21_dy4 */ \ + MV(CP(CSI22_DX0) , ( IEN | M0)) /* csi22_dx0 */ \ + MV(CP(CSI22_DY0) , ( IEN | M0)) /* csi22_dy0 */ \ + MV(CP(CSI22_DX1) , ( IEN | M0)) /* csi22_dx1 */ \ + MV(CP(CSI22_DY1) , ( IEN | M0)) /* csi22_dy1 */ \ + MV(CP(CAM_SHUTTER) , ( OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_shutter */ \ + MV(CP(CAM_STROBE) , ( OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_strobe */ \ + MV(CP(CAM_GLOBALRESET) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_83 */ \ + MV(CP(USBB1_ULPITLL_CLK) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_clk */ \ + MV(CP(USBB1_ULPITLL_STP) , ( OFF_EN | OFF_OUT_PTD | M4)) /* usbb1_ulpiphy_stp */ \ + MV(CP(USBB1_ULPITLL_DIR) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dir */ \ + MV(CP(USBB1_ULPITLL_NXT) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_nxt */ \ + MV(CP(USBB1_ULPITLL_DAT0) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat0 */ \ + MV(CP(USBB1_ULPITLL_DAT1) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat1 */ \ + MV(CP(USBB1_ULPITLL_DAT2) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat2 */ \ + MV(CP(USBB1_ULPITLL_DAT3) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat3 */ \ + MV(CP(USBB1_ULPITLL_DAT4) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat4 */ \ + MV(CP(USBB1_ULPITLL_DAT5) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat5 */ \ + MV(CP(USBB1_ULPITLL_DAT6) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat6 */ \ + MV(CP(USBB1_ULPITLL_DAT7) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat7 */ \ + MV(CP(USBB1_HSIC_DATA) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_data */ \ + MV(CP(USBB1_HSIC_STROBE) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_strobe */ \ + MV(CP(USBC1_ICUSB_DP) , ( IEN | M0)) /* usbc1_icusb_dp */ \ + MV(CP(USBC1_ICUSB_DM) , ( IEN | M0)) /* usbc1_icusb_dm */ \ + MV(CP(SDMMC1_CLK) , ( PTU | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc1_clk */ \ + MV(CP(SDMMC1_CMD) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_cmd */ \ + MV(CP(SDMMC1_DAT0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat0 */ \ + MV(CP(SDMMC1_DAT1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat1 */ \ + MV(CP(SDMMC1_DAT2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat2 */ \ + MV(CP(SDMMC1_DAT3) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat3 */ \ + MV(CP(SDMMC1_DAT4) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat4 */ \ + MV(CP(SDMMC1_DAT5) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat5 */ \ + MV(CP(SDMMC1_DAT6) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat6 */ \ + MV(CP(SDMMC1_DAT7) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat7 */ \ + MV(CP(ABE_MCBSP2_CLKX) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_clkx */ \ + MV(CP(ABE_MCBSP2_DR) , ( IEN | OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dr */ \ + MV(CP(ABE_MCBSP2_DX) , ( OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dx */ \ + MV(CP(ABE_MCBSP2_FSX) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_fsx */ \ + MV(CP(ABE_MCBSP1_CLKX) , ( IEN | M1)) /* abe_slimbus1_clock */ \ + MV(CP(ABE_MCBSP1_DR) , ( IEN | M1)) /* abe_slimbus1_data */ \ + MV(CP(ABE_MCBSP1_DX) , ( OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp1_dx */ \ + MV(CP(ABE_MCBSP1_FSX) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp1_fsx */ \ + MV(CP(ABE_PDM_UL_DATA) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_ul_data */ \ + MV(CP(ABE_PDM_DL_DATA) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_dl_data */ \ + MV(CP(ABE_PDM_FRAME) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_frame */ \ + MV(CP(ABE_PDM_LB_CLK) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_lb_clk */ \ + MV(CP(ABE_CLKS) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_clks */ \ + MV(CP(ABE_DMIC_CLK1) , ( M0)) /* abe_dmic_clk1 */ \ + MV(CP(ABE_DMIC_DIN1) , ( IEN | M0)) /* abe_dmic_din1 */ \ + MV(CP(ABE_DMIC_DIN2) , ( IEN | M0)) /* abe_dmic_din2 */ \ + MV(CP(ABE_DMIC_DIN3) , ( IEN | M0)) /* abe_dmic_din3 */ \ + MV(CP(UART2_CTS) , ( PTU | IEN | M0)) /* uart2_cts */ \ + MV(CP(UART2_RTS) , ( M0)) /* uart2_rts */ \ + MV(CP(UART2_RX) , ( PTU | IEN | M0)) /* uart2_rx */ \ + MV(CP(UART2_TX) , ( M0)) /* uart2_tx */ \ + MV(CP(HDQ_SIO) , ( M3)) /* gpio_127 */ \ + MV(CP(I2C1_SCL) , ( PTU | IEN | M0)) /* i2c1_scl */ \ + MV(CP(I2C1_SDA) , ( PTU | IEN | M0)) /* i2c1_sda */ \ + MV(CP(I2C2_SCL) , ( PTU | IEN | M0)) /* i2c2_scl */ \ + MV(CP(I2C2_SDA) , ( PTU | IEN | M0)) /* i2c2_sda */ \ + MV(CP(I2C3_SCL) , ( PTU | IEN | M0)) /* i2c3_scl */ \ + MV(CP(I2C3_SDA) , ( PTU | IEN | M0)) /* i2c3_sda */ \ + MV(CP(I2C4_SCL) , ( PTU | IEN | M0)) /* i2c4_scl */ \ + MV(CP(I2C4_SDA) , ( PTU | IEN | M0)) /* i2c4_sda */ \ + MV(CP(MCSPI1_CLK) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_clk */ \ + MV(CP(MCSPI1_SOMI) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_somi */ \ + MV(CP(MCSPI1_SIMO) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_simo */ \ + MV(CP(MCSPI1_CS0) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_cs0 */ \ + MV(CP(MCSPI1_CS1) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* mcspi1_cs1 */ \ + MV(CP(MCSPI1_CS2) , ( PTU | OFF_EN | OFF_OUT_PTU | M3)) /* gpio_139 */ \ + MV(CP(MCSPI1_CS3) , ( PTU | IEN | M3)) /* gpio_140 */ \ + MV(CP(UART3_CTS_RCTX) , ( PTU | IEN | M0)) /* uart3_tx */ \ + MV(CP(UART3_RTS_SD) , ( M0)) /* uart3_rts_sd */ \ + MV(CP(UART3_RX_IRRX) , ( IEN | M0)) /* uart3_rx */ \ + MV(CP(UART3_TX_IRTX) , ( M0)) /* uart3_tx */ \ + MV(CP(SDMMC5_CLK) , ( PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc5_clk */ \ + MV(CP(SDMMC5_CMD) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_cmd */ \ + MV(CP(SDMMC5_DAT0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat0 */ \ + MV(CP(SDMMC5_DAT1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat1 */ \ + MV(CP(SDMMC5_DAT2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat2 */ \ + MV(CP(SDMMC5_DAT3) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat3 */ \ + MV(CP(MCSPI4_CLK) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_clk */ \ + MV(CP(MCSPI4_SIMO) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_simo */ \ + MV(CP(MCSPI4_SOMI) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_somi */ \ + MV(CP(MCSPI4_CS0) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_cs0 */ \ + MV(CP(UART4_RX) , ( IEN | M0)) /* uart4_rx */ \ + MV(CP(UART4_TX) , ( M0)) /* uart4_tx */ \ + MV(CP(USBB2_ULPITLL_CLK) , ( IEN | M3)) /* gpio_157 */ \ + MV(CP(USBB2_ULPITLL_STP) , ( IEN | M5)) /* dispc2_data23 */ \ + MV(CP(USBB2_ULPITLL_DIR) , ( IEN | M5)) /* dispc2_data22 */ \ + MV(CP(USBB2_ULPITLL_NXT) , ( IEN | M5)) /* dispc2_data21 */ \ + MV(CP(USBB2_ULPITLL_DAT0) , ( IEN | M5)) /* dispc2_data20 */ \ + MV(CP(USBB2_ULPITLL_DAT1) , ( IEN | M5)) /* dispc2_data19 */ \ + MV(CP(USBB2_ULPITLL_DAT2) , ( IEN | M5)) /* dispc2_data18 */ \ + MV(CP(USBB2_ULPITLL_DAT3) , ( IEN | M5)) /* dispc2_data15 */ \ + MV(CP(USBB2_ULPITLL_DAT4) , ( IEN | M5)) /* dispc2_data14 */ \ + MV(CP(USBB2_ULPITLL_DAT5) , ( IEN | M5)) /* dispc2_data13 */ \ + MV(CP(USBB2_ULPITLL_DAT6) , ( IEN | M5)) /* dispc2_data12 */ \ + MV(CP(USBB2_ULPITLL_DAT7) , ( IEN | M5)) /* dispc2_data11 */ \ + MV(CP(USBB2_HSIC_DATA) , ( PTD | OFF_EN | OFF_OUT_PTU | M3)) /* gpio_169 */ \ + MV(CP(USBB2_HSIC_STROBE) , ( PTD | OFF_EN | OFF_OUT_PTU | M3)) /* gpio_170 */ \ + MV(CP(UNIPRO_TX0) , ( PTD | IEN | M3)) /* gpio_171 */ \ + MV(CP(UNIPRO_TY0) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col1 */ \ + MV(CP(UNIPRO_TX1) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col2 */ \ + MV(CP(UNIPRO_TY1) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col3 */ \ + MV(CP(UNIPRO_TX2) , ( PTU | IEN | M3)) /* gpio_0 */ \ + MV(CP(UNIPRO_TY2) , ( PTU | IEN | M3)) /* gpio_1 */ \ + MV(CP(UNIPRO_RX0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row0 */ \ + MV(CP(UNIPRO_RY0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row1 */ \ + MV(CP(UNIPRO_RX1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row2 */ \ + MV(CP(UNIPRO_RY1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row3 */ \ + MV(CP(UNIPRO_RX2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row4 */ \ + MV(CP(UNIPRO_RY2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row5 */ \ + MV(CP(USBA0_OTG_CE) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* usba0_otg_ce */ \ + MV(CP(USBA0_OTG_DP) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dp */ \ + MV(CP(USBA0_OTG_DM) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dm */ \ + MV(CP(FREF_CLK1_OUT) , ( M0)) /* fref_clk1_out */ \ + MV(CP(FREF_CLK2_OUT) , ( PTD | IEN | M3)) /* gpio_182 */ \ + MV(CP(SYS_NIRQ1) , ( PTU | IEN | M0)) /* sys_nirq1 */ \ + MV(CP(SYS_NIRQ2) , ( PTU | IEN | M0)) /* sys_nirq2 */ \ + MV(CP(SYS_BOOT0) , ( PTU | IEN | M3)) /* gpio_184 */ \ + MV(CP(SYS_BOOT1) , ( M3)) /* gpio_185 */ \ + MV(CP(SYS_BOOT2) , ( PTD | IEN | M3)) /* gpio_186 */ \ + MV(CP(SYS_BOOT3) , ( M3)) /* gpio_187 */ \ + MV(CP(SYS_BOOT4) , ( M3)) /* gpio_188 */ \ + MV(CP(SYS_BOOT5) , ( PTD | IEN | M3)) /* gpio_189 */ \ + MV(CP(DPM_EMU0) , ( IEN | M0)) /* dpm_emu0 */ \ + MV(CP(DPM_EMU1) , ( IEN | M0)) /* dpm_emu1 */ \ + MV(CP(DPM_EMU2) , ( IEN | M0)) /* dpm_emu2 */ \ + MV(CP(DPM_EMU3) , ( IEN | M5)) /* dispc2_data10 */ \ + MV(CP(DPM_EMU4) , ( IEN | M5)) /* dispc2_data9 */ \ + MV(CP(DPM_EMU5) , ( IEN | M5)) /* dispc2_data16 */ \ + MV(CP(DPM_EMU6) , ( IEN | M5)) /* dispc2_data17 */ \ + MV(CP(DPM_EMU7) , ( IEN | M5)) /* dispc2_hsync */ \ + MV(CP(DPM_EMU8) , ( IEN | M5)) /* dispc2_pclk */ \ + MV(CP(DPM_EMU9) , ( IEN | M5)) /* dispc2_vsync */ \ + MV(CP(DPM_EMU10) , ( IEN | M5)) /* dispc2_de */ \ + MV(CP(DPM_EMU11) , ( IEN | M5)) /* dispc2_data8 */ \ + MV(CP(DPM_EMU12) , ( IEN | M5)) /* dispc2_data7 */ \ + MV(CP(DPM_EMU13) , ( IEN | M5)) /* dispc2_data6 */ \ + MV(CP(DPM_EMU14) , ( IEN | M5)) /* dispc2_data5 */ \ + MV(CP(DPM_EMU15) , ( IEN | M5)) /* dispc2_data4 */ \ + MV(CP(DPM_EMU16) , ( M3)) /* gpio_27 */ \ + MV(CP(DPM_EMU17) , ( IEN | M5)) /* dispc2_data2 */ \ + MV(CP(DPM_EMU18) , ( IEN | M5)) /* dispc2_data1 */ \ + MV(CP(DPM_EMU19) , ( IEN | M5)) /* dispc2_data0 */ \ + MV1(WK(PAD0_SIM_IO) , ( IEN | M0)) /* sim_io */ \ + MV1(WK(PAD1_SIM_CLK) , ( M0)) /* sim_clk */ \ + MV1(WK(PAD0_SIM_RESET) , ( M0)) /* sim_reset */ \ + MV1(WK(PAD1_SIM_CD) , ( PTU | IEN | M0)) /* sim_cd */ \ + MV1(WK(PAD0_SIM_PWRCTRL) , ( M0)) /* sim_pwrctrl */ \ + MV1(WK(PAD1_SR_SCL) , ( PTU | IEN | M0)) /* sr_scl */ \ + MV1(WK(PAD0_SR_SDA) , ( PTU | IEN | M0)) /* sr_sda */ \ + MV1(WK(PAD1_FREF_XTAL_IN) , ( M0)) /* # */ \ + MV1(WK(PAD0_FREF_SLICER_IN) , ( M0)) /* fref_slicer_in */ \ + MV1(WK(PAD1_FREF_CLK_IOREQ) , ( M0)) /* fref_clk_ioreq */ \ + MV1(WK(PAD0_FREF_CLK0_OUT) , ( M2)) /* sys_drm_msecure */ \ + MV1(WK(PAD1_FREF_CLK3_REQ) , ( PTU | IEN | M0)) /* # */ \ + MV1(WK(PAD0_FREF_CLK3_OUT) , ( M0)) /* fref_clk3_out */ \ + MV1(WK(PAD1_FREF_CLK4_REQ) , ( PTU | IEN | M0)) /* # */ \ + MV1(WK(PAD0_FREF_CLK4_OUT) , ( M0)) /* # */ \ + MV1(WK(PAD1_SYS_32K) , ( IEN | M0)) /* sys_32k */ \ + MV1(WK(PAD0_SYS_NRESPWRON) , ( M0)) /* sys_nrespwron */ \ + MV1(WK(PAD1_SYS_NRESWARM) , ( M0)) /* sys_nreswarm */ \ + MV1(WK(PAD0_SYS_PWR_REQ) , ( PTU | M0)) /* sys_pwr_req */ \ + MV1(WK(PAD1_SYS_PWRON_RESET) , ( M3)) /* gpio_wk29 */ \ + MV1(WK(PAD0_SYS_BOOT6) , ( IEN | M3)) /* gpio_wk9 */ \ + MV1(WK(PAD1_SYS_BOOT7) , ( IEN | M3)) /* gpio_wk10 */ \ + MV1(WK(PAD1_FREF_CLK3_REQ), (M3)) /* gpio_wk30 */ \ + MV1(WK(PAD1_FREF_CLK4_REQ), (M3)) /* gpio_wk7 */ \ + MV1(WK(PAD0_FREF_CLK4_OUT), (M3)) /* gpio_wk8 */ + +#define MUX_DEFAULT_OMAP4_ALL() \ + MV(CP(GPMC_AD0), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat0 */ \ + MV(CP(GPMC_AD1), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat1 */ \ + MV(CP(GPMC_AD2), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat2 */ \ + MV(CP(GPMC_AD3), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat3 */ \ + MV(CP(GPMC_AD4), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat4 */ \ + MV(CP(GPMC_AD5), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat5 */ \ + MV(CP(GPMC_AD6), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat6 */ \ + MV(CP(GPMC_AD7), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat7 */ \ + MV(CP(GPMC_AD8), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_32 */ \ + MV(CP(GPMC_AD9), (M3_SAFE)) /* gpio_33 */ \ + MV(CP(GPMC_AD10), (M3_SAFE)) /* gpio_34 */ \ + MV(CP(GPMC_AD11), (M3_SAFE)) /* gpio_35 */ \ + MV(CP(GPMC_AD12), (M3_SAFE)) /* gpio_36 */ \ + MV(CP(GPMC_AD13), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_37 */ \ + MV(CP(GPMC_AD14), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_38 */ \ + MV(CP(GPMC_AD15), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_39 */ \ + MV(CP(GPMC_A16), (M3_SAFE)) /* gpio_40 */ \ + MV(CP(GPMC_A17), (M3_SAFE)) /* gpio_41 */ \ + MV(CP(GPMC_A18), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row6 */ \ + MV(CP(GPMC_A19), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row7 */ \ + MV(CP(GPMC_A20), (M3_SAFE)) /* gpio_44 */ \ + MV(CP(GPMC_A21), (M3_SAFE)) /* gpio_45 */ \ + MV(CP(GPMC_A22), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col6 */ \ + MV(CP(GPMC_A23), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col7 */ \ + MV(CP(GPMC_A24), (M3_SAFE)) /* gpio_48 */ \ + MV(CP(GPMC_A25), (M3_SAFE)) /* gpio_49 */ \ + MV(CP(GPMC_NCS0), (M0)) /* gpmc_ncs0 */ \ + MV(CP(GPMC_NCS1), (M3_SAFE)) /* gpio_51 */ \ + MV(CP(GPMC_NCS2), (M3_SAFE)) /* gpio_52 */ \ + MV(CP(GPMC_NCS3), (M3_SAFE)) /* gpio_53 */ \ + MV(CP(GPMC_NWP), (M0_SAFE)) /* gpmc_nwp */ \ + MV(CP(GPMC_CLK), (M3_SAFE)) /* gpio_55 */ \ + MV(CP(GPMC_NADV_ALE), (M0)) /* gpmc_nadv_ale */ \ + MV(CP(GPMC_NOE), (PTU | OFF_EN | OFF_OUT_PTD | M1)) /* sdmmc2_clk */ \ + MV(CP(GPMC_NWE), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_cmd */ \ + MV(CP(GPMC_NBE0_CLE), (M0)) /* gpmc_nbe0_cle*/ \ + MV(CP(GPMC_NBE1), (M3_SAFE)) /* gpio_60 */ \ + MV(CP(GPMC_WAIT0), (M0)) /* gpmc_wait */ \ + MV(CP(GPMC_WAIT1), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_39 */ \ + MV(CP(C2C_DATA11), (M3_SAFE)) /* gpio_100 */ \ + MV(CP(C2C_DATA12), (M1_SAFE)) /* dsi1_te0 */ \ + MV(CP(C2C_DATA13), (M3_SAFE)) /* gpio_102 */ \ + MV(CP(C2C_DATA14), (M1_SAFE)) /* dsi2_te0 */ \ + MV(CP(C2C_DATA15), (M3_SAFE)) /* gpio_104 */ \ + MV(CP(HDMI_HPD), (M0_SAFE)) /* hdmi_hpd */ \ + MV(CP(HDMI_CEC), (M0_SAFE)) /* hdmi_cec */ \ + MV(CP(HDMI_DDC_SCL), (M0_SAFE)) /* hdmi_ddc_scl */ \ + MV(CP(HDMI_DDC_SDA), (M0_SAFE)) /* hdmi_ddc_sda */ \ + MV(CP(CSI21_DX0), (M0_SAFE)) /* csi21_dx0 */ \ + MV(CP(CSI21_DY0), (M0_SAFE)) /* csi21_dy0 */ \ + MV(CP(CSI21_DX1), (M0_SAFE)) /* csi21_dx1 */ \ + MV(CP(CSI21_DY1), (M0_SAFE)) /* csi21_dy1 */ \ + MV(CP(CSI21_DX2), (M0_SAFE)) /* csi21_dx2 */ \ + MV(CP(CSI21_DY2), (M0_SAFE)) /* csi21_dy2 */ \ + MV(CP(CSI21_DX3), (M0_SAFE)) /* csi21_dx3 */ \ + MV(CP(CSI21_DY3), (M0_SAFE)) /* csi21_dy3 */ \ + MV(CP(CSI21_DX4), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpi_75 */ \ + MV(CP(CSI21_DY4), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpi_76 */ \ + MV(CP(CSI22_DX0), (M0_SAFE)) /* csi22_dx0 */ \ + MV(CP(CSI22_DY0), (M0_SAFE)) /* csi22_dy0 */ \ + MV(CP(CSI22_DX1), (M0_SAFE)) /* csi22_dx1 */ \ + MV(CP(CSI22_DY1), (M0_SAFE)) /* csi22_dy1 */ \ + MV(CP(CAM_SHUTTER), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_shutter */ \ + MV(CP(CAM_STROBE), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_strobe */ \ + MV(CP(CAM_GLOBALRESET), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_83 */ \ + MV(CP(USBB1_ULPITLL_CLK), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_clk */ \ + MV(CP(USBB1_ULPITLL_STP), (PTU | OFF_EN | OFF_OUT_PTD | M4)) /* usbb1_ulpiphy_stp */ \ + MV(CP(USBB1_ULPITLL_DIR), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dir */ \ + MV(CP(USBB1_ULPITLL_NXT), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_nxt */ \ + MV(CP(USBB1_ULPITLL_DAT0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat0 */ \ + MV(CP(USBB1_ULPITLL_DAT1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat1 */ \ + MV(CP(USBB1_ULPITLL_DAT2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat2 */ \ + MV(CP(USBB1_ULPITLL_DAT3), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat3 */ \ + MV(CP(USBB1_ULPITLL_DAT4), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat4 */ \ + MV(CP(USBB1_ULPITLL_DAT5), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat5 */ \ + MV(CP(USBB1_ULPITLL_DAT6), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat6 */ \ + MV(CP(USBB1_ULPITLL_DAT7), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat7 */ \ + MV(CP(USBB1_HSIC_DATA), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_data */ \ + MV(CP(USBB1_HSIC_STROBE), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_strobe */ \ + MV(CP(USBC1_ICUSB_DP), (M0_SAFE)) /* usbc1_icusb_dp */ \ + MV(CP(USBC1_ICUSB_DM), (M0_SAFE)) /* usbc1_icusb_dm */ \ + MV(CP(SDMMC1_CLK), (PTU | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc1_clk */ \ + MV(CP(SDMMC1_CMD), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_cmd */ \ + MV(CP(SDMMC1_DAT0), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat0 */ \ + MV(CP(SDMMC1_DAT1), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat1 */ \ + MV(CP(SDMMC1_DAT2), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat2 */ \ + MV(CP(SDMMC1_DAT3), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat3 */ \ + MV(CP(SDMMC1_DAT4), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat4 */ \ + MV(CP(SDMMC1_DAT5), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat5 */ \ + MV(CP(SDMMC1_DAT6), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat6 */ \ + MV(CP(SDMMC1_DAT7), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat7 */ \ + MV(CP(ABE_MCBSP2_CLKX), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_clkx */ \ + MV(CP(ABE_MCBSP2_DR), (IEN | OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dr */ \ + MV(CP(ABE_MCBSP2_DX), (OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dx */ \ + MV(CP(ABE_MCBSP2_FSX), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_fsx */ \ + MV(CP(ABE_MCBSP1_CLKX), (M1_SAFE)) /* abe_slimbus1_clock */ \ + MV(CP(ABE_MCBSP1_DR), (M1_SAFE)) /* abe_slimbus1_data */ \ + MV(CP(ABE_MCBSP1_DX), (OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp1_dx */ \ + MV(CP(ABE_MCBSP1_FSX), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp1_fsx */ \ + MV(CP(ABE_PDM_UL_DATA), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_ul_data */ \ + MV(CP(ABE_PDM_DL_DATA), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_dl_data */ \ + MV(CP(ABE_PDM_FRAME), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_frame */ \ + MV(CP(ABE_PDM_LB_CLK), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_lb_clk */ \ + MV(CP(ABE_CLKS), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_clks */ \ + MV(CP(ABE_DMIC_CLK1), (M0_SAFE)) /* abe_dmic_clk1 */ \ + MV(CP(ABE_DMIC_DIN1), (M0_SAFE)) /* abe_dmic_din1 */ \ + MV(CP(ABE_DMIC_DIN2), (M0_SAFE)) /* abe_dmic_din2 */ \ + MV(CP(ABE_DMIC_DIN3), (M0_SAFE)) /* abe_dmic_din3 */ \ + MV(CP(UART2_CTS), (PTU | IEN | M0)) /* uart2_cts */ \ + MV(CP(UART2_RTS), (M0)) /* uart2_rts */ \ + MV(CP(UART2_RX), (PTU | IEN | M0)) /* uart2_rx */ \ + MV(CP(UART2_TX), (M0)) /* uart2_tx */ \ + MV(CP(HDQ_SIO), (M3_SAFE)) /* gpio_127 */ \ + MV(CP(I2C1_SCL), (PTU | IEN | M0)) /* i2c1_scl */ \ + MV(CP(I2C1_SDA), (PTU | IEN | M0)) /* i2c1_sda */ \ + MV(CP(I2C2_SCL), (PTU | IEN | M0)) /* i2c2_scl */ \ + MV(CP(I2C2_SDA), (PTU | IEN | M0)) /* i2c2_sda */ \ + MV(CP(I2C3_SCL), (PTU | IEN | M0)) /* i2c3_scl */ \ + MV(CP(I2C3_SDA), (PTU | IEN | M0)) /* i2c3_sda */ \ + MV(CP(I2C4_SCL), (PTU | IEN | M0)) /* i2c4_scl */ \ + MV(CP(I2C4_SDA), (PTU | IEN | M0)) /* i2c4_sda */ \ + MV(CP(MCSPI1_CLK), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_clk */ \ + MV(CP(MCSPI1_SOMI), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_somi */ \ + MV(CP(MCSPI1_SIMO), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_simo */ \ + MV(CP(MCSPI1_CS0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_cs0 */ \ + MV(CP(MCSPI1_CS1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* mcspi1_cs1 */ \ + MV(CP(MCSPI1_CS2), (OFF_EN | OFF_OUT_PTU | M3)) /* gpio_139 */ \ + MV(CP(MCSPI1_CS3), (M3_SAFE)) /* gpio_140 */ \ + MV(CP(UART3_CTS_RCTX), (PTU | IEN | M0)) /* uart3_tx */ \ + MV(CP(UART3_RTS_SD), (M0)) /* uart3_rts_sd */ \ + MV(CP(UART3_RX_IRRX), (IEN | M0)) /* uart3_rx */ \ + MV(CP(UART3_TX_IRTX), (M0)) /* uart3_tx */ \ + MV(CP(SDMMC5_CLK), (PTU | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc5_clk */ \ + MV(CP(SDMMC5_CMD), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_cmd */ \ + MV(CP(SDMMC5_DAT0), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat0 */ \ + MV(CP(SDMMC5_DAT1), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat1 */ \ + MV(CP(SDMMC5_DAT2), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat2 */ \ + MV(CP(SDMMC5_DAT3), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat3 */ \ + MV(CP(MCSPI4_CLK), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_clk */ \ + MV(CP(MCSPI4_SIMO), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_simo */ \ + MV(CP(MCSPI4_SOMI), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_somi */ \ + MV(CP(MCSPI4_CS0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_cs0 */ \ + MV(CP(UART4_RX), (IEN | M0)) /* uart4_rx */ \ + MV(CP(UART4_TX), (M0)) /* uart4_tx */ \ + MV(CP(USBB2_ULPITLL_CLK), (M3)) /* gpio_157 */ \ + MV(CP(USBB2_ULPITLL_STP), (M5)) /* dispc2_data23 */ \ + MV(CP(USBB2_ULPITLL_DIR), (M5)) /* dispc2_data22 */ \ + MV(CP(USBB2_ULPITLL_NXT), (M5)) /* dispc2_data21 */ \ + MV(CP(USBB2_ULPITLL_DAT0), (M5)) /* dispc2_data20 */ \ + MV(CP(USBB2_ULPITLL_DAT1), (M5)) /* dispc2_data19 */ \ + MV(CP(USBB2_ULPITLL_DAT2), (M5)) /* dispc2_data18 */ \ + MV(CP(USBB2_ULPITLL_DAT3), (M5)) /* dispc2_data15 */ \ + MV(CP(USBB2_ULPITLL_DAT4), (M5)) /* dispc2_data14 */ \ + MV(CP(USBB2_ULPITLL_DAT5), (M5)) /* dispc2_data13 */ \ + MV(CP(USBB2_ULPITLL_DAT6), (M5)) /* dispc2_data12 */ \ + MV(CP(USBB2_ULPITLL_DAT7), (M5)) /* dispc2_data11 */ \ + MV(CP(USBB2_HSIC_DATA), (OFF_EN | OFF_OUT_PTU | M3)) /* gpio_169 */ \ + MV(CP(USBB2_HSIC_STROBE), (OFF_EN | OFF_OUT_PTU | M3)) /* gpio_170 */ \ + MV(CP(UNIPRO_TX0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col0 */ \ + MV(CP(UNIPRO_TY0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col1 */ \ + MV(CP(UNIPRO_TX1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col2 */ \ + MV(CP(UNIPRO_TY1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col3 */ \ + MV(CP(UNIPRO_TX2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_0 */ \ + MV(CP(UNIPRO_TY2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_1 */ \ + MV(CP(UNIPRO_RX0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row0 */ \ + MV(CP(UNIPRO_RY0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row1 */ \ + MV(CP(UNIPRO_RX1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row2 */ \ + MV(CP(UNIPRO_RY1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row3 */ \ + MV(CP(UNIPRO_RX2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row4 */ \ + MV(CP(UNIPRO_RY2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row5 */ \ + MV(CP(USBA0_OTG_CE), (PTU | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* usba0_otg_ce */ \ + MV(CP(USBA0_OTG_DP), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dp */ \ + MV(CP(USBA0_OTG_DM), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dm */ \ + MV(CP(FREF_CLK1_OUT), (M0_SAFE)) /* fref_clk1_out */ \ + MV(CP(FREF_CLK2_OUT), (M0_SAFE)) /* fref_clk2_out */ \ + MV(CP(SYS_NIRQ1), (PTU | IEN | M0)) /* sys_nirq1 */ \ + MV(CP(SYS_NIRQ2), (PTU | IEN | M0)) /* sys_nirq2 */ \ + MV(CP(SYS_BOOT0), (M3_SAFE)) /* gpio_184 */ \ + MV(CP(SYS_BOOT1), (M3_SAFE)) /* gpio_185 */ \ + MV(CP(SYS_BOOT2), (M3_SAFE)) /* gpio_186 */ \ + MV(CP(SYS_BOOT3), (M3_SAFE)) /* gpio_187 */ \ + MV(CP(SYS_BOOT4), (M3_SAFE)) /* gpio_188 */ \ + MV(CP(SYS_BOOT5), (M3_SAFE)) /* gpio_189 */ \ + MV(CP(DPM_EMU0), (M0_SAFE)) /* dpm_emu0 */ \ + MV(CP(DPM_EMU1), (M0_SAFE)) /* dpm_emu1 */ \ + MV(CP(DPM_EMU2), (M0_SAFE)) /* dpm_emu2 */ \ + MV(CP(DPM_EMU3), (M5)) /* dispc2_data10 */ \ + MV(CP(DPM_EMU4), (M5)) /* dispc2_data9 */ \ + MV(CP(DPM_EMU5), (M5)) /* dispc2_data16 */ \ + MV(CP(DPM_EMU6), (M5)) /* dispc2_data17 */ \ + MV(CP(DPM_EMU7), (M5)) /* dispc2_hsync */ \ + MV(CP(DPM_EMU8), (M5)) /* dispc2_pclk */ \ + MV(CP(DPM_EMU9), (M5)) /* dispc2_vsync */ \ + MV(CP(DPM_EMU10), (M5)) /* dispc2_de */ \ + MV(CP(DPM_EMU11), (M5)) /* dispc2_data8 */ \ + MV(CP(DPM_EMU12), (M5)) /* dispc2_data7 */ \ + MV(CP(DPM_EMU13), (M5)) /* dispc2_data6 */ \ + MV(CP(DPM_EMU14), (M5)) /* dispc2_data5 */ \ + MV(CP(DPM_EMU15), (M5)) /* dispc2_data4 */ \ + MV(CP(DPM_EMU16), (M5)) /* dispc2_data3/dmtimer8_pwm_evt */ \ + MV(CP(DPM_EMU17), (M5)) /* dispc2_data2 */ \ + MV(CP(DPM_EMU18), (M5)) /* dispc2_data1 */ \ + MV(CP(DPM_EMU19), (M5)) /* dispc2_data0 */ \ + MV1(WK(PAD0_SIM_IO), (M0_SAFE)) /* sim_io */ \ + MV1(WK(PAD1_SIM_CLK), (M0_SAFE)) /* sim_clk */ \ + MV1(WK(PAD0_SIM_RESET), (M0_SAFE)) /* sim_reset */ \ + MV1(WK(PAD1_SIM_CD), (M0_SAFE)) /* sim_cd */ \ + MV1(WK(PAD0_SIM_PWRCTRL), (M0_SAFE)) /* sim_pwrctrl */ \ + MV1(WK(PAD1_SR_SCL), (PTU | IEN | M0)) /* sr_scl */ \ + MV1(WK(PAD0_SR_SDA), (PTU | IEN | M0)) /* sr_sda */ \ + MV1(WK(PAD1_FREF_XTAL_IN), (M0_SAFE)) /* # */ \ + MV1(WK(PAD0_FREF_SLICER_IN), (M0_SAFE)) /* fref_slicer_in */ \ + MV1(WK(PAD1_FREF_CLK_IOREQ), (M0_SAFE)) /* fref_clk_ioreq */ \ + MV1(WK(PAD0_FREF_CLK0_OUT), (M0)) /* sys_drm_msecure */ \ + MV1(WK(PAD1_FREF_CLK3_REQ), (M0)) /* # */ \ + MV1(WK(PAD0_FREF_CLK3_OUT), (M0_SAFE)) /* fref_clk3_out */ \ + MV1(WK(PAD1_FREF_CLK4_REQ), (M0_SAFE)) /* # */ \ + MV1(WK(PAD0_FREF_CLK4_OUT), (M0_SAFE)) /* # */ \ + MV1(WK(PAD1_SYS_32K), (IEN | M0_SAFE)) /* sys_32k */ \ + MV1(WK(PAD0_SYS_NRESPWRON), (IEN | M0_SAFE)) /* sys_nrespwron */ \ + MV1(WK(PAD1_SYS_NRESWARM), (IEN | M0_SAFE)) /* sys_nreswarm */ \ + MV1(WK(PAD0_SYS_PWR_REQ), (M0_SAFE)) /* sys_pwr_req */ \ + MV1(WK(PAD1_SYS_PWRON_RESET), (M3_SAFE)) /* gpio_wk29 */ \ + MV1(WK(PAD0_SYS_BOOT6), (M3_SAFE)) /* gpio_wk9 */ \ + MV1(WK(PAD1_SYS_BOOT7), (M3_SAFE)) /* gpio_wk10 */ \ + MV1(WK(PAD1_JTAG_TCK), (IEN | M0)) /* jtag_tck */ \ + MV1(WK(PAD0_JTAG_RTCK), (M0)) /* jtag_rtck */ \ + MV1(WK(PAD1_JTAG_TMS_TMSC), (IEN | M0)) /* jtag_tms_tmsc */ \ + MV1(WK(PAD0_JTAG_TDI), (IEN | M0)) /* jtag_tdi */ \ + MV1(WK(PAD1_JTAG_TDO), (M0)) /* jtag_tdo */ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT_OMAP4(); + return; +} + +/****************************************************************************** + * Routine: update_mux() + * Description:Update balls which are different between boards. All should be + * updated to match functionality. However, I'm only updating ones + * which I'll be using for now. When power comes into play they + * all need updating. + *****************************************************************************/ +void update_mux(u32 btype, u32 mtype) +{ + /* REVISIT */ + return; + +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} + +int nand_init(void) +{ + return 0; +} +void reset_phy(unsigned int base) +{ + *(volatile int*)(base + IODFT_TLGC) |= (1 << 10); +} diff --git a/board/omap4430panda/platform.S b/board/omap4430panda/platform.S new file mode 100644 index 0000000..2eff964 --- /dev/null +++ b/board/omap4430panda/platform.S @@ -0,0 +1,51 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK diff --git a/board/omap4430panda/syslib.c b/board/omap4430panda/syslib.c new file mode 100644 index 0000000..2b16cc4 --- /dev/null +++ b/board/omap4430panda/syslib.c @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> +#include <asm/arch/bits.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> + +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + diff --git a/board/overo/Makefile b/board/overo/Makefile new file mode 100644 index 0000000..32f9bf1 --- /dev/null +++ b/board/overo/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := overo.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/overo/config.mk b/board/overo/config.mk new file mode 100644 index 0000000..7ee3014 --- /dev/null +++ b/board/overo/config.mk @@ -0,0 +1,20 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Overo board uses TI OMAP35xx (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Overo has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40200800 diff --git a/board/overo/overo.c b/board/overo/overo.c new file mode 100644 index 0000000..8df53e5 --- /dev/null +++ b/board/overo/overo.c @@ -0,0 +1,1148 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * Modified for overo + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <i2c.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* params for 37XX */ +#define CORE_DPLL_PARAM_M2 0x09 +#define CORE_DPLL_PARAM_M 0x360 +#define CORE_DPLL_PARAM_N 0xC + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(); +extern dpll_param *get_iva_dpll_param(); +extern dpll_param *get_core_dpll_param(); +extern dpll_param *get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v)) + +static char *rev_s[CPU_3XX_MAX_REV] = { + "1.0", + "2.0", + "2.1", + "3.0", + "3.1", + "UNKNOWN", + "UNKNOWN", + "3.1.2"}; + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return mode >>= 8; +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + u32 mem_type = get_sysboot_value(); + + switch (mem_type) { + case 0: + case 2: + case 4: + case 16: + case 22: + return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: + return GPMC_NAND; + + case 3: + case 6: + return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: + return GPMC_MDOC; + + case 17: + case 18: + case 24: + return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: + return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_type(void) - extract cpu info + ******************************************/ +u32 get_cpu_type(void) +{ + return __raw_readl(CONTROL_OMAP_STATUS); +} + +/****************************************** + * get_cpu_id(void) - extract cpu id + * returns 0 for ES1.0, cpuid otherwise + ******************************************/ +u32 get_cpu_id(void) +{ + u32 cpuid = 0; + + /* + * On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate between ES1.0 and > ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); + if ((cpuid & 0xf) == 0x0) { + return 0; + } else { + /* Decode the IDs on > ES1.0 */ + cpuid = __raw_readl(CONTROL_IDCODE); + } + + return cpuid; +} + +/****************************************** + * get_cpu_family(void) - extract cpu info + ******************************************/ +u32 get_cpu_family(void) +{ + u16 hawkeye; + u32 cpu_family; + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_OMAP34XX; + + hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff; + switch (hawkeye) { + case HAWKEYE_OMAP34XX: + cpu_family = CPU_OMAP34XX; + break; + case HAWKEYE_AM35XX: + cpu_family = CPU_AM35XX; + break; + case HAWKEYE_OMAP36XX: + cpu_family = CPU_OMAP36XX; + break; + default: + cpu_family = CPU_OMAP34XX; + } + + return cpu_family; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_3XX_ES10; + else + return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf; +} + +/****************************************** + * Print CPU information + ******************************************/ +int print_cpuinfo (void) +{ + char *cpu_family_s, *cpu_s, *sec_s; + + switch (get_cpu_family()) { + case CPU_OMAP34XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3503: + cpu_s = "3503"; + break; + case OMAP3515: + cpu_s = "3515"; + break; + case OMAP3525: + cpu_s = "3525"; + break; + case OMAP3530: + cpu_s = "3530"; + break; + default: + cpu_s = "35XX"; + break; + } + break; + case CPU_AM35XX: + cpu_family_s = "AM"; + switch (get_cpu_type()) { + case AM3505: + cpu_s = "3505"; + break; + case AM3517: + cpu_s = "3517"; + break; + default: + cpu_s = "35XX"; + break; + } + break; + case CPU_OMAP36XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3730: + cpu_s = "3630/3730"; + break; + default: + cpu_s = "36XX/37XX"; + break; + } + break; + default: + cpu_family_s = "OMAP"; + cpu_s = "35XX"; + } + + switch (get_device_type()) { + case TST_DEVICE: + sec_s = "TST"; + break; + case EMU_DEVICE: + sec_s = "EMU"; + break; + case HS_DEVICE: + sec_s = "HS"; + break; + case GP_DEVICE: + sec_s = "GP"; + break; + default: + sec_s = "?"; + } + + printf("%s%s-%s ES%s\n", + cpu_family_s, cpu_s, sec_s, rev_s[get_cpu_rev()]); + + return 0; +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if (get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * Routine: get_board_revision + * Description: Returns the board revision + *****************************************************************/ +int get_board_revision(void) +{ + int revision; + unsigned char data; + + /* board revisions <= R2410 connect 4030 irq_1 to gpio112 */ + /* these boards should return a revision number of 0 */ + /* the code below forces a 4030 RTC irq to ensure that gpio112 is low */ + data = 0x01; + i2c_write(0x4B, 0x29, 1, &data, 1); + data = 0x0c; + i2c_write(0x4B, 0x2b, 1, &data, 1); + i2c_read(0x4B, 0x2a, 1, &data, 1); + + if (!omap_request_gpio(112) && + !omap_request_gpio(113) && + !omap_request_gpio(115)) { + + omap_set_gpio_direction(112, 1); + omap_set_gpio_direction(113, 1); + omap_set_gpio_direction(115, 1); + + revision = omap_get_gpio_datain(115) << 2 | + omap_get_gpio_datain(113) << 1 | + omap_get_gpio_datain(112); + + omap_free_gpio(112); + omap_free_gpio(113); + omap_free_gpio(115); + } else { + printf("Error: unable to acquire board revision GPIOs\n"); + revision = -1; + } + + return revision; +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + switch (get_board_revision()) { + case 0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */ + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + break; + case 1: /* Micron 256MB/512MB, 1/2 banks of 256MB */ + __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + break; + case 2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */ + __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_HYNIX, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_HYNIX, SDRC_MCFG_1); + __raw_writel(HYNIX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(HYNIX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(HYNIX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(HYNIX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + break; + default: + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } + + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + + delay(5000); + + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ +} +#endif /* CFG_3430SDRAM_DDR */ + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else + cdiv = 1; + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source */ + /* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + cdiff *= cdiv; + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if (osc_clk == S38_4M) + *sys_clkin_sel = 4; + else if (osc_clk == S26M) + *sys_clkin_sel = 3; + else if (osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if (osc_clk == S13M) + *sys_clkin_sel = 1; + else if (osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */ + clk_index = sys_clkin_sel / 2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + + if (get_cpu_family() == CPU_OMAP36XX) { + sr32(CM_CLKSEL3_PLL, 0, 5, CORE_DPLL_PARAM_M2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, CORE_DPLL_PARAM_M); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, CORE_DPLL_PARAM_N); /* set n */ + } else { + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + } + + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock(); + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + ********************************************************/ +int misc_init_r(void) +{ + print_cpuinfo(); + printf("Board revision: %d\n", get_board_revision()); + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); + +#endif + + /* Enable GPIO 4, 5, & 6 clocks */ + sr32(CM_FCLKEN_PER, 17, 3, 0x7); + sr32(CM_ICLKEN_PER, 17, 3, 0x7); + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); + sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); + + sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); + sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); + sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); + sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); + sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); + sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); + sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); + sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); + sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); + sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); + sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); + sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); + + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\ + /* - PEN_DOWN*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTD | EN | M4)) /*GPIO_127*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTD | EN | M4)) /*GPIO_128*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTD | EN | M4)) /*GPIO_129*/\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals, NAND is mapped at CS0, oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS is done in u-boot. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND_K9F1G08R0A + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) { + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()) { +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + } +#endif + +#ifdef CFG_ONENAND + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) { + __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()) { +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } +#endif + + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang(void) +{ + while (0) + ; +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/board/overo/platform.S b/board/overo/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/board/overo/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/board/overo/x-load.lds b/board/overo/x-load.lds new file mode 100644 index 0000000..5f352d3 --- /dev/null +++ b/board/overo/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} |