diff options
Diffstat (limited to 'include/asm/arch-arm1136')
| -rw-r--r-- | include/asm/arch-arm1136/bits.h | 49 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/clocks.h | 51 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/clocks242x.h | 147 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/clocks243x.h | 223 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/mem.h | 383 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/omap2420.h | 223 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/omap2430.h | 255 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/sizes.h | 50 | ||||
| -rw-r--r-- | include/asm/arch-arm1136/sys_info.h | 139 |
9 files changed, 1520 insertions, 0 deletions
diff --git a/include/asm/arch-arm1136/bits.h b/include/asm/arch-arm1136/bits.h new file mode 100644 index 0000000..dc3273e --- /dev/null +++ b/include/asm/arch-arm1136/bits.h @@ -0,0 +1,49 @@ +/* bits.h + * Copyright (c) 2004 Texas Instruments + * + * This package is free software; you can redistribute it and/or + * modify it under the terms of the license found in the file + * named COPYING that should have accompanied this file. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ +#ifndef __bits_h +#define __bits_h 1 + +#define BIT0 (1<<0) +#define BIT1 (1<<1) +#define BIT2 (1<<2) +#define BIT3 (1<<3) +#define BIT4 (1<<4) +#define BIT5 (1<<5) +#define BIT6 (1<<6) +#define BIT7 (1<<7) +#define BIT8 (1<<8) +#define BIT9 (1<<9) +#define BIT10 (1<<10) +#define BIT11 (1<<11) +#define BIT12 (1<<12) +#define BIT13 (1<<13) +#define BIT14 (1<<14) +#define BIT15 (1<<15) +#define BIT16 (1<<16) +#define BIT17 (1<<17) +#define BIT18 (1<<18) +#define BIT19 (1<<19) +#define BIT20 (1<<20) +#define BIT21 (1<<21) +#define BIT22 (1<<22) +#define BIT23 (1<<23) +#define BIT24 (1<<24) +#define BIT25 (1<<25) +#define BIT26 (1<<26) +#define BIT27 (1<<27) +#define BIT28 (1<<28) +#define BIT29 (1<<29) +#define BIT30 (1<<30) +#define BIT31 (1<<31) + +#endif + diff --git a/include/asm/arch-arm1136/clocks.h b/include/asm/arch-arm1136/clocks.h new file mode 100644 index 0000000..8e00d2e --- /dev/null +++ b/include/asm/arch-arm1136/clocks.h @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_CLOCKS_H_ +#define _OMAP24XX_CLOCKS_H_ + +#define COMMIT_DIVIDERS 0x1 +#define MODE_BYPASS_FAST 0x2 +#define APLL_LOCK 0xc +#define DPLL_LOCK 0x3 /* DPLL lock */ +#define LDELAY 12000000 + +#if defined(CONFIG_OMAP242X) +#include <asm/arch/clocks242x.h> +#elif defined(CONFIG_OMAP243X) +#include <asm/arch/clocks243x.h> +#endif + +#define S12M 12000000 +#define S13M 13000000 +#define S19_2M 19200000 +#define S24M 24000000 +#define S26M 26000000 +#define S38_4M 38400000 + +#endif + + + + + + + + diff --git a/include/asm/arch-arm1136/clocks242x.h b/include/asm/arch-arm1136/clocks242x.h new file mode 100644 index 0000000..0ae1c4e --- /dev/null +++ b/include/asm/arch-arm1136/clocks242x.h @@ -0,0 +1,147 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP242X_CLOCKS_H_ +#define _OMAP242X_CLOCKS_H_ + +/****************************************************************************; +; PRCM Scheme I +; +; Enable clocks and DPLL for: +; DPLL=330, DPLLout=660 M=1,N=55 CM_CLKSEL1_PLL[21:8] 12/2*55 +; Core=660 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=330 (mpu domain) 2 CM_CLKSEL_MPU[4:0] +; DSPF=220 (dsp domain) 3 CM_CLKSEL_DSP[4:0] +; DSPI=110 6 CM_CLKSEL_DSP[6:5] +; DSP_S activated CM_CLKSEL_DSP[7] +; IVAF=165 (dsp domain) 4 CM_CLKSEL_DSP[12:8] +; IVAF=82.5 auto +; IVAI auto +; IVA_MPU auto +; IVA_S bypass CM_CLKSEL_DSP[13] +; GFXF=82.5 (gfx domain) 8 CM_CLKSEL_FGX[2:0] +; SSI_SSRF=220 3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=110 auto +; L3=165Mhz (sdram) 4 CM_CLKSEL1_CORE[4:0] +; L4=82.5Mhz 8 +; C_L4_USB=41.25 16 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define I_DPLL_OUT_X2 0x2 /* x2 core out */ +#define I_MPU_DIV 0x2 /* mpu = core/2 */ +#define I_DSP_DIV 0x3c3 /* dsp & iva divider */ +#define I_GFX_DIV 0x2 +#define I_BUS_DIV 0x04601044 +#ifdef INPUT_CLK_13MHZ +#define I_DPLL_330 0x0114AC00 /* 13MHz */ +#else +#define I_DPLL_330 0x01837100 /* 12MHz */ +#endif + +/****************************************************************************; +; PRCM Scheme II <tested> +; +; Enable clocks and DPLL for: +; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 +; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] +; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] +; DSPI=100 6 CM_CLKSEL_DSP[6:5] +; DSP_S bypass CM_CLKSEL_DSP[7] +; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] +; IVAF=100 auto +; IVAI auto +; IVA_MPU auto +; IVA_S bypass CM_CLKSEL_DSP[13] +; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] +; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=100 auto +; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] +; L4=100Mhz 6 +; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define II_DPLL_OUT_X2 0x2 /* x2 core out */ +#define II_MPU_DIV 0x2 /* mpu = core/2 */ +#define II_DSP_DIV 0x343 /* dsp & iva divider */ +#define II_GFX_DIV 0x2 +#define II_BUS_DIV 0x04601026 +#ifdef INPUT_CLK_13MHZ +#define II_DPLL_300 0x0112CC00 /* 13MHz */ +#else +#define II_DPLL_300 0x01832100 /* 12MHz */ +#endif + +/****************************************************************************; +; PRCM Scheme III <tested> +; +; Enable clocks and DPLL for: +; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 +; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] +; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] +; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] +; DSP_S ACTIVATED CM_CLKSEL_DSP[7] +; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] +; IVAF=88.67 auto +; IVAI auto +; IVA_MPU auto +; IVA_S ACTIVATED CM_CLKSEL_DSP[13] +; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: +; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=88.67 auto +; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] +; L4=66.5Mhz /8 +; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define III_DPLL_OUT_X2 0x2 /* x2 core out */ +#define III_MPU_DIV 0x2 /* mpu = core/2 */ +#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ +#define III_GFX_DIV 0x2 +#define III_BUS_DIV 0x08301044 +#ifdef INPUT_CLK_13MHZ +#define III_DPLL_266 0x0110AC00 /* 13MHz */ +#else +#define III_DPLL_266 0x01885500 /* 12MHz */ +#endif + +/* set defaults for boot up */ +#ifdef PRCM_CONFIG_I +# define DPLL_OUT I_DPLL_OUT_X2 +# define MPU_DIV I_MPU_DIV +# define DSP_DIV I_DSP_DIV +# define GFX_DIV I_GFX_DIV +# define BUS_DIV I_BUS_DIV +# define DPLL_VAL I_DPLL_266 +#elif PRCM_CONFIG_II +# define DPLL_OUT II_DPLL_OUT_X2 +# define MPU_DIV II_MPU_DIV +# define DSP_DIV II_DSP_DIV +# define GFX_DIV II_GFX_DIV +# define BUS_DIV II_BUS_DIV +# define DPLL_VAL II_DPLL_300 +#elif PRCM_CONFIG_III +# define DPLL_OUT III_DPLL_OUT_X2 +# define MPU_DIV III_MPU_DIV +# define DSP_DIV III_DSP_DIV +# define GFX_DIV III_GFX_DIV +# define BUS_DIV III_BUS_DIV +# define DPLL_VAL III_DPLL_266 +#endif + +#endif diff --git a/include/asm/arch-arm1136/clocks243x.h b/include/asm/arch-arm1136/clocks243x.h new file mode 100644 index 0000000..18d2e46 --- /dev/null +++ b/include/asm/arch-arm1136/clocks243x.h @@ -0,0 +1,223 @@ +/* + * (C) Copyright 2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP243X_CLOCKS_H_ +#define _OMAP243X_CLOCKS_H_ + +/* cm_clksel core fields not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/* 2430 Ratio's */ +/* 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | RX_CLKSEL_DSS2 \ + | RX_CLKSEL_DSS1 | R1_CLKSEL_L4 | R1_CLKSEL_L3 +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | RX_CLKSEL_DSS2 \ + | RX_CLKSEL_DSS1 | R2_CLKSEL_L4 | R2_CLKSEL_L3 +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Boot */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | RX_CLKSEL_DSS2 \ + | RX_CLKSEL_DSS1 | RB_CLKSEL_L4 | RB_CLKSEL_L3 +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2430 Target modes: Along with each configuration the CPU has several modes + * which goes along with them. Modes mainly are the addition of descrite DPLL + * combinations to go along with a ratio. + */ +/* hardware goverend */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed */ + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_12 + +#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_13 + +#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_19 + +/* #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz */ + +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M2_DPLL_DIV_12 \ + | M2_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +/* Use 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, relock time issue */ +#define M2_DPLL_MULT_13 (330 << 12) +#define M2_DPLL_DIV_13 (12 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M2_DPLL_DIV_13 \ + | M2_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M2_DPLL_MULT_19 (275 << 12) +#define M2_DPLL_DIV_19 (15 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M2_DPLL_DIV_19 \ + | M2_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #3 (ratio2) DPLL = 330*2 = 660MHz, L3=110MHz */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M3_DPLL_DIV_12 \ + | M3_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M3_DPLL_MULT_13 (330 << 12) +#define M3_DPLL_DIV_13 (12 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M3_DPLL_DIV_13 \ + | M3_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M3_DPLL_MULT_19 (275 << 12) +#define M3_DPLL_DIV_19 (15 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M3_DPLL_DIV_19 \ + | M3_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz*/ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M4_DPLL_DIV_12 \ + | M4_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M4_DPLL_DIV_13 \ + | M4_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M4_DPLL_DIV_19 \ + | M4_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz, L3=133MHz */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M5A_DPLL_DIV_12 \ + | M5A_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M5A_DPLL_MULT_13 (266 << 12) +#define M5A_DPLL_DIV_13 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M5A_DPLL_DIV_13 \ + | M5A_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M5A_DPLL_MULT_19 (180 << 12) +#define M5A_DPLL_DIV_19 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M5A_DPLL_DIV_19 \ + | M5A_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #5b (ratio1) target DPLL = 200*2 = 400MHz, L3=100MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M5B_DPLL_DIV_12 \ + | M5B_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M5B_DPLL_DIV_13 \ + | M5B_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M5B_DPLL_DIV_19 \ + | M5B_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* 2430 - chassis (sedna) */ + /* 165 (ratio1) same as above #2 */ + /* 150 (ratio1)*/ + /* 133 (ratio2) same as above #4 */ + /* 110 (ratio2) same as above #3*/ + /* 104 (ratio2)*/ + /* boot (boot) */ + +/* high and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* set defaults for boot up */ +#if defined(PRCM_CONFIG_2) /* ARM-330MHz IVA2-330MHz L3-165MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M2_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_3) /* ARM-330MHz IVA2-330MHz L3-110MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R2_CLKSEL_MPU +# define DSP_DIV R2_CM_CLKSEL_DSP_VAL +# define GFX_DIV R2_CM_CLKSEL_GFX_VAL +# define BUS_DIV R2_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M3_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_5A) /* ARM-266MHz IVA2-266MHz L3-133MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M5A_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_5B) /* ARM-200MHz IVA2-200MHz L3-100MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M5B_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R1_CM_CLKSEL_MDM_VAL +#endif + +#endif diff --git a/include/asm/arch-arm1136/mem.h b/include/asm/arch-arm1136/mem.h new file mode 100644 index 0000000..2a3da73 --- /dev/null +++ b/include/asm/arch-arm1136/mem.h @@ -0,0 +1,383 @@ + +/* + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_MEM_H_ +#define _OMAP24XX_MEM_H_ + +#define SDRC_CS0_OSET 0x0 +#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ + +#ifndef __ASSEMBLY__ +/* struct's for holding data tables for current boards, they are getting used + early in init when NO global access are there */ +struct sdrc_data_s { + u32 sdrc_sharing; + u32 sdrc_mdcfg_0_ddr; + u32 sdrc_mdcfg_0_sdr; + u32 sdrc_actim_ctrla_0; + u32 sdrc_actim_ctrlb_0; + u32 sdrc_rfr_ctrl; + u32 sdrc_mr_0_ddr; + u32 sdrc_mr_0_sdr; + u32 sdrc_dllab_ctrl; +} /*__attribute__ ((packed))*/; +typedef struct sdrc_data_s sdrc_data_t; + +typedef enum { + STACKED = 0, + IP_DDR = 1, + COMBO_DDR = 2, + IP_SDR = 3, +} mem_t; + +#endif + +/* set the 243x-SDRC incoming address convention */ +#if defined(SDRC_B_R_C) +#define B_ALL (0 << 6) /* bank-row-column */ +#elif defined(SDRC_B1_R_B0_C) +#define B_ALL (1 << 6) /* bank1-row-bank0-column */ +#elif defined(SDRC_R_B_C) +#define B_ALL (2 << 6) /* row-bank-column */ +#endif + +/* Slower full frequency range default timings for x32 operation*/ +#define H4_2420_SDRC_SHARING 0x00000100 +#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ +#define H4_2420_SDRC_MR_0_SDR 0x00000031 +#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ +#define SDP_2430_SDRC_MDCFG_0_DDR (0x02584019|B_ALL) /* Infin ddr module */ +#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ +#define H4_2420_SDRC_MR_0_DDR 0x00000032 + +#define H4_2422_SDRC_SHARING 0x00004b00 +#define H4_2422_SDRC_MDCFG_MONO_DDR 0x01A02011 /* stacked mono die ddr on 2422 */ +#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked dual die ddr on 2422 */ +#define H4_2422_SDRC_MR_0_DDR 0x00000032 + +#define H4_2423_SDRC_SHARING 0x00004900 /* 2420POP board cke1 not connected */ +#define H4_2423_SDRC_MDCFG_0_DDR 0x01A02011 /* stacked dual die ddr on 2423 */ +#define H4_2423_SDRC_MDCFG_1_DDR 0x00801011 /* stacked dual die ddr on 2423 */ + +/* ES1 work around timings */ +#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ +#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 +#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ + +/* optimized timings good for current shipping parts */ +#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 +#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e +#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ +#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ +#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 +#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 /* 7.8us/7.5ns - 50 = 0x3de */ +#define SDP_24XX_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50 = 0x4e2 */ +#define H4_242X_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 90deg, allow DPLLout*1 to work (combo)*/ +#define H4_242X_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 90deg, for ES2 */ +#define SDP_24XX_SDRC_DLLAB_CTRL_165MHz 0x0000170C /* 72deg, code will recalc dll load */ + +/* Infineon part of 2430SDP (133MHz optimized) ~ 7.5ns + * TDAL = Twr/Tck + Trp/tck = 15/7.5 + 22.5/7.5 = 2 + 3 = 5 + * TDPL = 15/7.5 = 2 + * TRRD = 15/2.5 = 2 + * TRCD = 22.5/7.5 = 3 + * TRP = 22.5/7.5 = 3 + * TRAS = 45/7.5 = 6 + * TRC = 65/7.5 = 8.6->9 + * TRFC = 75/7.5 = 10 + * ACTIMB + * TCKE = 2 <new in 2430> + * XSR = 120/7.5 = 16 + */ +#define TDAL_133 5 +#define TDPL_133 2 +#define TRRD_133 2 +#define TRCD_133 3 +#define TRP_133 3 +#define TRAS_133 6 +#define TRC_133 9 +#define TRFC_133 10 +#define V_ACTIMA_133 ((TRFC_133 << 27) | (TRC_133 << 22) | (TRAS_133 << 18) |(TRP_133 << 15) | \ + (TRCD_133 << 12) |(TRRD_133 << 9) |(TDPL_133 << 6) | (TDAL_133)) + +#define TCKE_133 2 +#define XSR_133 16 +#define V_ACTIMB_133 ((TCKE_133 << 12) | (XSR_133 << 0)) + +/* Infineon part of 2430SDP (165MHz optimized) 6.06ns + * ACTIMA + * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 + * TDPL (Twr) = 15/6 = 2.5 -> 3 + * TRRD = 12/6 = 2 + * TRCD = 18/6 = 3 + * TRP = 18/6 = 3 + * TRAS = 42/6 = 7 + * TRC = 60/6 = 10 + * TRFC = 72/6 = 12 + * ACTIMB + * TCKE = 2 <new in 2430> + * XSR = 120/6 = 20 + */ +#define TDAL_165 6 +#define TDPL_165 3 +#define TRRD_165 2 +#define TRCD_165 3 +#define TRP_165 3 +#define TRAS_165 7 +#define TRC_165 10 +#define TRFC_165 12 +#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | (TRAS_165 << 18) |(TRP_165 << 15) | \ + (TRCD_165 << 12) |(TRRD_165 << 9) |(TDPL_165 << 6) | (TDAL_165)) + +#define TCKE_165 2 +#define XSR_165 20 +#define V_ACTIMB_165 ((TCKE_165 << 12) | (XSR_165 << 0)) + +#if defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B) +# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define SDP_2430_SDRC_ACTIM_CTRLA_0 V_ACTIMA_133 +# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2420_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_100MHz +# define SDP_2430_SDRC_DLLAB_CTRL 0x0000730E +# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2422_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_100MHz +#elif defined(PRCM_CONFIG_III) || defined(PRCM_CONFIG_5A) || defined(PRCM_CONFIG_3) +# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz +# define SDP_2430_SDRC_ACTIM_CTRLA_0 V_ACTIMA_133 +# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz +# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz +# define H4_2420_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_133MHz +# define SDP_2430_SDRC_DLLAB_CTRL 0x0000730E +# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz +# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz +# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz +# define H4_2422_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_133MHz +#elif defined(PRCM_CONFIG_I) || defined(PRCM_CONFIG_2) +# define H4_2420_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define SDP_2430_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define H4_2420_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 +# define H4_2420_SDRC_RFR_CTRL SDP_24XX_SDRC_RFR_CTRL_165MHz +# define H4_2420_SDRC_DLLAB_CTRL SDP_24XX_SDRC_DLLAB_CTRL_165MHz +# define SDP_2430_SDRC_DLLAB_CTRL SDP_24XX_SDRC_DLLAB_CTRL_165MHz +# define H4_2422_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define H4_2422_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 +# define H4_2422_SDRC_RFR_CTRL SDP_24XX_SDRC_RFR_CTRL_165MHz +# define H4_2422_SDRC_DLLAB_CTRL SDP_24XX_SDRC_DLLAB_CTRL_165MHz +#endif + +/* + * GPMC settings - + * Definitions is as per the following format + * # define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of the same. + * if values are independent of the board, this definition will be present in this file + * if values are dependent on the board, then this should go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * STNOR - Intel Strata Flash + * SMNAND - Samsung NAND + * MPDB - H4 MPDB board + * SBNOR - Sibley NOR + * ONNAND - Samsung One NAND + * + * include/configs/file.h contains the following defn - for all CS we are interested + * #define OMAP24XX_GPMC_CSx PART + * #define OMAP24XX_GPMC_CSx_SIZE Size + * #define OMAP24XX_GPMC_CSx_MAP Map + * Where: + * x - CS number + * PART - Part Name as defined above + * SIZE - how big is the mapping to be + * GPMC_SIZE_128M - 0x8 + * GPMC_SIZE_64M - 0xC + * GPMC_SIZE_32M - 0xE + * GPMC_SIZE_16M - 0xF + * MAP - Map this CS to which address(GPMC address space)- Absolute address + * >>24 before being used. + */ + +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#if defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B) /* L3 at 100MHz */ +# define SMNAND_GPMC_CONFIG1 0x0 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x000f0f01 +# define STNOR_GPMC_CONFIG3 0x00050502 +# define STNOR_GPMC_CONFIG4 0x0C060C06 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x0 /* 0? Not defined so far... this value is reset val as per gpmc doc */ +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001F1F00 +# define MPDB_GPMC_CONFIG3 0x00080802 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x031A1F1F +# define MPDB_GPMC_CONFIG6 0x000003C2 +#endif + +#if defined(PRCM_CONFIG_III) || defined(PRCM_CONFIG_5A) || defined(PRCM_CONFIG_3) /* L3 at 133MHz */ +# define SMNAND_GPMC_CONFIG1 0x00001800 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 +# define SMNAND_GPMC_CONFIG7 0x00000C44 + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x10081008 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x000004c4 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +# define SIBNOR_GPMC_CONFIG1 0x3 +# define SIBNOR_GPMC_CONFIG2 0x00151501 +# define SIBNOR_GPMC_CONFIG3 0x00060602 +# define SIBNOR_GPMC_CONFIG4 0x10081008 +# define SIBNOR_GPMC_CONFIG5 0x01131F1F +# define SIBNOR_GPMC_CONFIG6 0x00000000 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000c0c01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0c040c04 +# define ONENAND_GPMC_CONFIG5 0x010C1010 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +# define PCMCIA_GPMC_CONFIG1 0x01E91200 +# define PCMCIA_GPMC_CONFIG2 0x001E1E01 +# define PCMCIA_GPMC_CONFIG3 0x00020203 +# define PCMCIA_GPMC_CONFIG4 0x1D041D04 +# define PCMCIA_GPMC_CONFIG5 0x031D1F1F +# define PCMCIA_GPMC_CONFIG6 0x000004C4 +#endif /* endif CFG_PRCM_III */ + +#if defined (PRCM_CONFIG_I) || defined(PRCM_CONFIG_2) /* L3 at 165MHz */ +# define SMNAND_GPMC_CONFIG1 0x00001800 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 +# define SMNAND_GPMC_CONFIG7 0x00000C44 + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x11091109 +# define STNOR_GPMC_CONFIG5 0x01141F1F +# define STNOR_GPMC_CONFIG6 0x000004c4 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1c0b1c0a +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +# define SIBNOR_GPMC_CONFIG1 0x3 +# define SIBNOR_GPMC_CONFIG2 0x00151501 +# define SIBNOR_GPMC_CONFIG3 0x00060602 +# define SIBNOR_GPMC_CONFIG4 0x11091109 +# define SIBNOR_GPMC_CONFIG5 0x01141F1F +# define SIBNOR_GPMC_CONFIG6 0x00000000 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000F0F01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0F040F04 +# define ONENAND_GPMC_CONFIG5 0x010F1010 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +# define PCMCIA_GPMC_CONFIG1 0x01E91200 +# define PCMCIA_GPMC_CONFIG2 0x001E1E01 +# define PCMCIA_GPMC_CONFIG3 0x00020203 +# define PCMCIA_GPMC_CONFIG4 0x1D041D04 +# define PCMCIA_GPMC_CONFIG5 0x031D1F1F +# define PCMCIA_GPMC_CONFIG6 0x000004C4 + +#endif + +#if 0 +/* Board Specific Settings for each of the configurations for chips + * whose values change as per platform. - None currently + */ +#if CONFIG_OMAP24XXH4 +#include <asm/arch/mem-h4.h> +#endif + +#if CONFIG_2430SDP +#include <asm/arch/mem-sdp2430.h> +#endif + +#endif /* if 0 */ + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PROC_NOR 1 +#define PROC_NAND 2 +#define PISMO_SIBLEY0 3 +#define PISMO_SIBLEY1 4 +#define PISMO_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO_PCMCIA 7 + +/* make it readable for the gpmc_init */ +#define PROC_NOR_BASE FLASH_BASE +#define PROC_NAND_BASE NAND_BASE +#define PISMO_SIB0_BASE SIBLEY_MAP1 +#define PISMO_SIB1_BASE SIBLEY_MAP2 +#define PISMO_ONEN_BASE ONENAND_MAP +#define DBG_MPDB_BASE DEBUG_BASE +#define PISMO_PCMCIA_BASE PCMCIA_BASE + +#endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/include/asm/arch-arm1136/omap2420.h b/include/asm/arch-arm1136/omap2420.h new file mode 100644 index 0000000..2164b68 --- /dev/null +++ b/include/asm/arch-arm1136/omap2420.h @@ -0,0 +1,223 @@ +/* + * Copyright (C) 2005 Texas Instruments, <www.ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2420_SYS_H_ +#define _OMAP2420_SYS_H_ + +#include <asm/arch/sizes.h> + + +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + + +/* + * 2420 specific Section + */ + +/* CONTROL */ +#define OMAP2420_CTRL_BASE (0x48000000) +#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) + +/* TAP information */ +#define OMAP2420_TAP_BASE (0x48014000) +#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) + +/* GPMC */ +#define OMAP2420_GPMC_BASE (0x6800A000) +#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) +#define GPMC_SYSSTATUS (OMAP2420_GPMC_BASE+0x14) +#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) +#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) +#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) + +/* SMS */ +#define OMAP2420_SMS_BASE 0x68008000 +#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) + +/* SDRC */ +#define OMAP2420_SDRC_BASE 0x68009000 +#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) +#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) +#define SDRC_DLLA_STATUS (OMAP2420_SDRC_BASE+0x64) +#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) +#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) +#define SDRC_MCFG_1 (OMAP2420_SDRC_BASE+0xB0) +#define SDRC_MR_1 (OMAP2420_SDRC_BASE+0xB4) +#define SDRC_EMR2_1 (OMAP2420_SDRC_BASE+0xBC) +#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) +#define SDRC_RFR_CTRL1 (OMAP2420_SDRC_BASE+0xD4) +#define SDRC_MANUAL_1 (OMAP2420_SDRC_BASE+0xD8) + +#define OMAP2420_SDRC_CS0 0x80000000 +#define OMAP2420_SDRC_CS1 0xA0000000 + +#define LOADDLL BIT2 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + + +/* UART */ +#define OMAP2420_UART1 0x4806A000 +#define OMAP2420_UART2 0x4806C000 +#define OMAP2420_UART3 0x4806E000 + +/* General Purpose Timers */ +#define OMAP2420_GPT1 0x48028000 +#define OMAP2420_GPT2 0x4802A000 +#define OMAP2420_GPT3 0x48078000 +#define OMAP2420_GPT4 0x4807A000 +#define OMAP2420_GPT5 0x4807C000 +#define OMAP2420_GPT6 0x4807E000 +#define OMAP2420_GPT7 0x48080000 +#define OMAP2420_GPT8 0x48082000 +#define OMAP2420_GPT9 0x48084000 +#define OMAP2420_GPT10 0x48086000 +#define OMAP2420_GPT11 0x48088000 +#define OMAP2420_GPT12 0x4808A000 + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x48020000 +#define WD2_BASE 0x48022000 +#define WD3_BASE 0x48024000 +#define WD4_BASE 0x48026000 +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define OMAP2420_CM_BASE 0x48008000 +#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) +#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) +#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) +#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) + +/* + * H4 specific Section + */ + +/* + * The 2420's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + */ +#if defined(CONFIG_OMAP2420H4) +/* GPMC */ +#ifdef CONFIG_VIRTIO_A /* Pre version B */ +# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x04000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#else +# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x08000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#endif + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +/* FPGA on Debug board.*/ +#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) +#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) +#endif /* endif CONFIG_2420H4 */ + +#endif + diff --git a/include/asm/arch-arm1136/omap2430.h b/include/asm/arch-arm1136/omap2430.h new file mode 100644 index 0000000..cf2b0f9 --- /dev/null +++ b/include/asm/arch-arm1136/omap2430.h @@ -0,0 +1,255 @@ +/* + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2430_SYS_H_ +#define _OMAP2430_SYS_H_ + +#include <asm/arch/sizes.h> + + +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + +/* device type */ +#define DEVICE_MASK (BIT8|BIT9|BIT10) +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* + * 2430 specific Section + */ +#define OMAP243X_CORE_L4_IO_BASE 0x48000000 +#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000 +#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE + + +/* CONTROL */ +#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000) +#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8) + +/* TAP information */ +#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000) +#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204) + +/* + GPMC : In 2430 NOR and NAND can coexist. + During NAND booting , NAND is at CS0 and NOR at CS1 + and Debug FPGA is GPMC_CS5 +*/ +#define OMAP24XX_GPMC_BASE (0x6E000000) + +#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10) +#define GPMC_SYSSTATUS (OMAP24XX_GPMC_BASE+0x14) +#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70) +#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74) +#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_5 (OMAP24XX_GPMC_BASE+0x150) +#define GPMC_CONFIG2_5 (OMAP24XX_GPMC_BASE+0x154) +#define GPMC_CONFIG3_5 (OMAP24XX_GPMC_BASE+0x158) +#define GPMC_CONFIG4_5 (OMAP24XX_GPMC_BASE+0x15C) +#define GPMC_CONFIG5_5 (OMAP24XX_GPMC_BASE+0x160) +#define GPMC_CONFIG6_5 (OMAP24XX_GPMC_BASE+0x164) +#define GPMC_CONFIG7_5 (OMAP24XX_GPMC_BASE+0x168) + + +/* SMS */ +#define OMAP24XX_SMS_BASE 0x6C000000 +#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10) + +/* SDRC */ +#define OMAP24XX_SDRC_BASE 0x6D000000 +#define OMAP24XX_SDRC_CS0 0x80000000 +#define OMAP24XX_SDRC_CS1 0xA0000000 +#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14) +#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60) +#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64) +#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68) +#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0) +#define SDRC_MCFG_1 (OMAP24XX_SDRC_BASE+0xB0) +#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8) +#define SDRC_RFR_CTRL1 (OMAP24XX_SDRC_BASE+0xD4) + +#define LOADDLL BIT2 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + + +/* UART */ +#define OMAP2430_UART1 0x4806A000 +#define OMAP2430_UART2 0x4806C000 +#define OMAP2430_UART3 0x4806E000 + +/* General Purpose Timers */ +#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000) +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000 + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000) +#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000) +#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */ +#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000) +#define S32K_CR (SYNC_32KTIMER_BASE+0x10) + +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000) + +#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060) +#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070) +#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078) +#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080) +#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084) +#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244) +#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300) +#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310) +#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340) +#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350) +#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400) +#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410) +#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840) +#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40) + +/* SMX-APE */ +#define SMX_APE_BASE 0x68000000 +#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) +#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) +#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) +#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) + +/* IVA2 */ +#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) + +/* + * The 2430's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + */ +#if defined(CONFIG_OMAP243X) + +/* GPMC */ +/* This is being used by the macros in mem.h. PHYS_FLASH_1 is defined to H4_CS0_BASE */ +# define H4_CS1_BASE 0x09000000 /* flash (64 Meg aligned) */ +#define CFG_FLASH_BASE H4_CS1_BASE +#define DEBUG_BASE 0x08000000 + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +#endif /* endif CONFIG_2430SDP */ + +#endif + diff --git a/include/asm/arch-arm1136/sizes.h b/include/asm/arch-arm1136/sizes.h new file mode 100644 index 0000000..3dddd8e --- /dev/null +++ b/include/asm/arch-arm1136/sizes.h @@ -0,0 +1,50 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_31M 0x01F00000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif /* __sizes_h */ + diff --git a/include/asm/arch-arm1136/sys_info.h b/include/asm/arch-arm1136/sys_info.h new file mode 100644 index 0000000..94a09cd --- /dev/null +++ b/include/asm/arch-arm1136/sys_info.h @@ -0,0 +1,139 @@ +/* + * Copyright 2005 (C) Texas Instruments, <www.ti.com> + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_SYS_INFO_H_ +#define _OMAP24XX_SYS_INFO_H_ + +#if 0 +typedef struct h4_system_data { + /* base board info */ + u32 base_b_rev; /* rev from base board i2c */ + /* cpu board info */ + u32 cpu_b_rev; /* rev from cpu board i2c */ + u32 cpu_b_mux; /* mux type on daughter board */ + u32 cpu_b_ddr_type; /* mem type */ + u32 cpu_b_ddr_speed; /* ddr speed rating */ + u32 cpu_b_switches; /* boot ctrl switch settings */ + /* cpu info */ + u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ + u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ +} h4_sys_data; + +#endif + +#define XDR_POP 5 /* package on package part */ +#define SDR_DISCRETE 4 /* 128M memory SDR module*/ +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_2420 0x2420 +#define CPU_2422 0x2422 /* 2420 + 64M stacked */ +#define CPU_2423 0x2423 /* 2420 + 96M stacked */ +#define CPU_2430 0x2430 + +/* 242x real hardware: + * ES1 = rev 0 + * ES2 = rev 1 + * ES2.05 = rev 2 + * ES2.1 = rev 3 + * ES2.1.1 = rev 4 + */ + +/* 242x code defines: + * ES1 = 0+1 = 1 + * ES2 = 1+1 = 2 + * ES2.05 = 2+1 = 3 + * ES2.1 = 3+1 = 4 + * Es2.1.1 = 4+1 = 5 + */ +#define CPU_2422_ES1 1 +#define CPU_2422_ES2 2 +#define CPU_2422_ES2_05 3 +#define CPU_2422_ES2_1 4 +#define CPU_2422_ES2_1_1 5 + +#define CPU_2420_ES1 1 +#define CPU_2420_ES2 2 +#define CPU_2420_ES2_05 3 +#define CPU_2420_ES2_1 4 +#define CPU_2420_ES2_1_1 5 + +#define CPU_242X_ES1 1 +#define CPU_242X_ES2 2 +#define CPU_242X_ES2_05 3 +#define CPU_242X_ES2_1 4 +#define CPU_242X_ES2_1_1 5 + +#define CPU_2420_2422_ES1 1 +#define CPU_2420_2422_ES2_1 4 + +/* 243x real hardware: + * ES1 = rev 0 + * ES2 = rev 1 + * + * 243x code defines: + * ES1 = 0+1 = 1 + * ES2 = 1+1 = 2 + */ +#define CPU_2430_ES1 1 +#define CPU_2430_ES2 2 + +#ifdef VPOM2430 +# define CPU_2430_VIRTIO 3 +#else +# define CPU_2430_VIRTIO 1 +#endif +#define CPU_2430_ZEBU 0xD + +#define CPU_2420_CHIPID 0x0B5D9000 +#define CPU_2430_CHIPID 0x0B68A000 +#define CPU_24XX_ID_MASK 0x0FFFF000 +#define CPU_242X_REV_MASK 0xF0000000 +#define CPU_242X_PID_MASK 0x000F0000 + +#define BOARD_H4_MENELAUS 1 +#define BOARD_H4_SDP 2 +#define BOARD_H4_MENELAUS_HRP 3 +#define BOARD_SDP_2430 4 + +#define GPMC_MUXED 1 +#define GPMC_NONMUXED 0 + +#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ +#define TYPE_NOR 0x000 +#define TYPE_ONENAND 0x800 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ + +#endif |