diff options
Diffstat (limited to 'uart-monitor/include/asm/arch-arm1136/omap2430.h')
| m--------- | uart-monitor | 0 | ||||
| -rw-r--r-- | uart-monitor/include/asm/arch-arm1136/omap2430.h | 255 |
2 files changed, 255 insertions, 0 deletions
diff --git a/uart-monitor b/uart-monitor deleted file mode 160000 -Subproject eb8b047c29a2027fbdd841cd1289fa27ddb22d7 diff --git a/uart-monitor/include/asm/arch-arm1136/omap2430.h b/uart-monitor/include/asm/arch-arm1136/omap2430.h new file mode 100644 index 0000000..cf2b0f9 --- /dev/null +++ b/uart-monitor/include/asm/arch-arm1136/omap2430.h @@ -0,0 +1,255 @@ +/* + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2430_SYS_H_ +#define _OMAP2430_SYS_H_ + +#include <asm/arch/sizes.h> + + +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + +/* device type */ +#define DEVICE_MASK (BIT8|BIT9|BIT10) +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* + * 2430 specific Section + */ +#define OMAP243X_CORE_L4_IO_BASE 0x48000000 +#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000 +#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE + + +/* CONTROL */ +#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000) +#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8) + +/* TAP information */ +#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000) +#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204) + +/* + GPMC : In 2430 NOR and NAND can coexist. + During NAND booting , NAND is at CS0 and NOR at CS1 + and Debug FPGA is GPMC_CS5 +*/ +#define OMAP24XX_GPMC_BASE (0x6E000000) + +#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10) +#define GPMC_SYSSTATUS (OMAP24XX_GPMC_BASE+0x14) +#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70) +#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74) +#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_5 (OMAP24XX_GPMC_BASE+0x150) +#define GPMC_CONFIG2_5 (OMAP24XX_GPMC_BASE+0x154) +#define GPMC_CONFIG3_5 (OMAP24XX_GPMC_BASE+0x158) +#define GPMC_CONFIG4_5 (OMAP24XX_GPMC_BASE+0x15C) +#define GPMC_CONFIG5_5 (OMAP24XX_GPMC_BASE+0x160) +#define GPMC_CONFIG6_5 (OMAP24XX_GPMC_BASE+0x164) +#define GPMC_CONFIG7_5 (OMAP24XX_GPMC_BASE+0x168) + + +/* SMS */ +#define OMAP24XX_SMS_BASE 0x6C000000 +#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10) + +/* SDRC */ +#define OMAP24XX_SDRC_BASE 0x6D000000 +#define OMAP24XX_SDRC_CS0 0x80000000 +#define OMAP24XX_SDRC_CS1 0xA0000000 +#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14) +#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60) +#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64) +#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68) +#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0) +#define SDRC_MCFG_1 (OMAP24XX_SDRC_BASE+0xB0) +#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8) +#define SDRC_RFR_CTRL1 (OMAP24XX_SDRC_BASE+0xD4) + +#define LOADDLL BIT2 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + + +/* UART */ +#define OMAP2430_UART1 0x4806A000 +#define OMAP2430_UART2 0x4806C000 +#define OMAP2430_UART3 0x4806E000 + +/* General Purpose Timers */ +#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000) +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000 + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000) +#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000) +#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */ +#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000) +#define S32K_CR (SYNC_32KTIMER_BASE+0x10) + +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000) + +#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060) +#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070) +#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078) +#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080) +#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084) +#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244) +#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300) +#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310) +#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340) +#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350) +#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400) +#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410) +#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840) +#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40) + +/* SMX-APE */ +#define SMX_APE_BASE 0x68000000 +#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) +#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) +#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) +#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) + +/* IVA2 */ +#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) + +/* + * The 2430's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + */ +#if defined(CONFIG_OMAP243X) + +/* GPMC */ +/* This is being used by the macros in mem.h. PHYS_FLASH_1 is defined to H4_CS0_BASE */ +# define H4_CS1_BASE 0x09000000 /* flash (64 Meg aligned) */ +#define CFG_FLASH_BASE H4_CS1_BASE +#define DEBUG_BASE 0x08000000 + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +#endif /* endif CONFIG_2430SDP */ + +#endif + |