Merge "Remove the vbox target from the build system."

10 files changed, 0 insertions, 296 deletions

diff --git a/envsetup.sh b/envsetup.sh
index 2cd342c..2bba626 100644
--- a/envsetup.sh
+++ b/envsetup.sh
@@ -457,7 +457,6 @@ add_lunch_combo aosp_mips-eng
 add_lunch_combo aosp_mips64-eng
 add_lunch_combo aosp_x86-eng
 add_lunch_combo aosp_x86_64-eng
-add_lunch_combo vbox_x86-eng
 
 function print_lunch_menu()
 {
diff --git a/target/board/vbox_x86/AndroidBoard.mk b/target/board/vbox_x86/AndroidBoard.mk
deleted file mode 100644
index 8b13789..0000000
--- a/target/board/vbox_x86/AndroidBoard.mk
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/target/board/vbox_x86/BoardConfig.mk b/target/board/vbox_x86/BoardConfig.mk
deleted file mode 100644
index e5a1d3e..0000000
--- a/target/board/vbox_x86/BoardConfig.mk
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# IA target for VitualBox
-#
-
-TARGET_ARCH=x86
-TARGET_COMPRESS_MODULE_SYMBOLS := false
-TARGET_NO_RECOVERY := true
-TARGET_HARDWARE_3D := false
-BOARD_USES_GENERIC_AUDIO := true
-USE_CAMERA_STUB := true
-TARGET_CPU_ABI := x86
-TARGET_USERIMAGES_USE_EXT4 := true
-TARGET_BOOTIMAGE_USE_EXT2 := true
-BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
-BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
-
-# For VirtualBox and likely other emulators
-BOARD_INSTALLER_CMDLINE := init=/init console=ttyS0 console=tty0 vga=788 verbose
-BOARD_KERNEL_CMDLINE := init=/init qemu=1 console=tty0 vga=788 verbose androidboot.hardware=vbox_x86 androidboot.console=tty0 android.qemud=tty0
-TARGET_USE_DISKINSTALLER := true
-
-TARGET_DISK_LAYOUT_CONFIG := build/target/board/vbox_x86/disk_layout.conf
-BOARD_BOOTIMAGE_MAX_SIZE := 8388608
-BOARD_SYSLOADER_MAX_SIZE := 7340032
-BOARD_FLASH_BLOCK_SIZE := 512
-# 50M
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 52428800
-# 500M
-BOARD_INSTALLERIMAGE_PARTITION_SIZE := 524288000
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-# Reserve 265M  for the system partition
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 268435456
-
-WITH_DEXPREOPT := false
-
-# The eth0 device should be started with dhcp on boot.
-# Useful for emulators that don't provide a wifi connection.
-NET_ETH0_STARTONBOOT := true
-
-ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.heapsize=32m
diff --git a/target/board/vbox_x86/README.txt b/target/board/vbox_x86/README.txt
deleted file mode 100644
index 568dc5f..0000000
--- a/target/board/vbox_x86/README.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-The "vbox_x86" product defines a non-hardware-specific target intended
-to run on the VirtualBox emulator.
-
-Most of the Android devices (networking, phones, sound, etc) do not work.
-
-ADB via ethernet works with this target. You can use 'adb install' to
-test applications that do not require network, phone or sound support.
-This emulation is useful because VirtualBox runs much faster then does the
-QEMU emulators (at least until a KVM enabled QEMU emulator is available).
diff --git a/target/board/vbox_x86/device.mk b/target/board/vbox_x86/device.mk
deleted file mode 100644
index a44a87f..0000000
--- a/target/board/vbox_x86/device.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for the product aspects that
-# are specific to the emulator.
-
-LOCAL_PATH := $(call my-dir)
-
-PRODUCT_PROPERTY_OVERRIDES := \
-    ro.ril.hsxpa=1 \
-    ro.ril.gprsclass=10 \
-    ro.adb.qemud=1
-
-LOCAL_KERNEL := prebuilts/qemu-kernel/x86/kernel-vbox
-
-PRODUCT_COPY_FILES := \
-    device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
-    device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
-    device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
-    build/target/board/vbox_x86/init.vbox_x86.rc:root/init.vbox_x86.rc \
-    $(LOCAL_KERNEL):kernel
-
-$(call inherit-product, frameworks/native/build/phone-xhdpi-1024-dalvik-heap.mk)
diff --git a/target/board/vbox_x86/disk_layout.conf b/target/board/vbox_x86/disk_layout.conf
deleted file mode 100644
index 12241ab..0000000
--- a/target/board/vbox_x86/disk_layout.conf
+++ /dev/null
@@ -1,76 +0,0 @@
-# Best to align all partion start/ends on a cylinder boundary (fdisk prefers it)
-# 512 bytes/sector
-# 63 sectors/track
-# 32 tracks/cylinder
-
-# LBAs are in 'k', so...
-# 1008 blocks (1k each) (1032192 bytes) / cylinder
-
-device {
-
-    path /dev/block/sda
-
-    scheme mbr
-
-    # bytes in a disk sector (== 1 LBA), must be a power of 2!
-    sector_size 512
-
-    # Start_lba should be on a cylindar boundary.
-    start_lba 63
-
-    # Autodetect disk size if == 0
-    num_lba 0
-
-    partitions {
-        # /dev/sdX1
-        sysloader {
-            active y
-            type linux
-            # 8 cyls in length... about 8M
-            len 8064
-        }
-
-        # /dev/sdX2
-        recovery {
-            active y
-            type linux
-            # 8 cyls in length... about 8M
-            len 8064
-        }
-
-        # /dev/sdX3
-        boot {
-            active y
-            type linux
-            # 8 cyls in length... about 8M
-            len 8064
-        }
-
-        # /dev/sdX4
-        # (extended partion begins)
-
-        # /dev/sdX5
-        cache {
-            type linux
-            len 512M
-        }
-
-        # /dev/sdX6
-        system {
-            type linux
-            len 512M
-        }
-
-        # /dev/sdX7
-        third_party {
-            type linux
-            len 512M
-        }
-
-        # /dev/sdX8
-        data {
-            type linux
-            len -1
-        }
-    }
-}
diff --git a/target/board/vbox_x86/init.vbox_x86.rc b/target/board/vbox_x86/init.vbox_x86.rc
deleted file mode 100644
index 15ca572..0000000
--- a/target/board/vbox_x86/init.vbox_x86.rc
+++ /dev/null
@@ -1,90 +0,0 @@
-on early-init
-    export EXTERNAL_STORAGE /mnt/sdcard
-    mkdir /mnt/sdcard 0000 system system
-    # for backwards compatibility
-    symlink /mnt/sdcard /sdcard
-
-on boot
-    setprop ARGH ARGH
-    setprop net.eth0.gw 10.0.2.2
-    setprop net.eth0.dns1 10.0.2.3
-    setprop net.gprs.local-ip 10.0.2.15
-    setprop ro.radio.use-ppp no
-    setprop ro.build.product generic
-    setprop ro.product.device generic
-
-# fake some battery state
-    setprop status.battery.state Slow
-    setprop status.battery.level 5
-    setprop status.battery.level_raw  50
-    setprop status.battery.level_scale 9
-
-# disable some daemons the emulator doesn't want
-    stop dund
-    stop akmd
-
-# start essential services
-    start qemud
-    start goldfish-logcat
-#   start goldfish-setup
-    start netcfg
-
-    setprop ro.setupwizard.mode EMULATOR
-
-on fs
-# mount sda (system) and sdb (data) partitions
-    mount ext4 /dev/block/sda6 /system
-    mount ext4 /dev/block/sda6 /system ro remount
-    mount ext4 /dev/block/sdb6 /data nosuid nodev
-    mount ext4 /dev/block/sdb7 /cache nosuid nodev
-
-# enable Google-specific location features,
-# like NetworkLocationProvider and LocationCollector
-    setprop ro.com.google.locationfeatures 1
-
-# For the emulator, which bypasses Setup Wizard, you can specify
-# account info for the device via these two properties.  Google
-# Login Service will insert these accounts into the database when
-# it is created (ie, after a data wipe).
-#
-#   setprop ro.config.hosted_account username@hosteddomain.org:password
-#   setprop ro.config.google_account username@gmail.com:password
-#
-# You MUST have a Google account on the device, and you MAY
-# additionally have a hosted account.  No other configuration is
-# supported, and arbitrary breakage may result if you specify
-# something else.
-
-service goldfish-setup /system/etc/init.goldfish.sh
-    user root
-    group root
-    oneshot
-
-# The qemu-props program is used to set various system
-# properties on boot. It must be run early during the boot
-# process to avoid race conditions with other daemons that
-# might read them (e.g. surface flinger), so define it in
-# class 'core'
-#
-service qemu-props /system/bin/qemu-props
-    class core
-    user root
-    group root
-    oneshot
-
-service qemud /system/bin/qemud
-    socket qemud    stream 666
-    oneshot
-
-# -Q is a special logcat option that forces the
-# program to check wether it runs on the emulator
-# if it does, it redirects its output to the device
-# named by the androidboot.console kernel option
-# if not, it simply exits immediately
-
-service goldfish-logcat /system/bin/logcat -Q
-    oneshot
-
-# Enable networking so that adb can connect
-service netcfg /system/bin/netcfg eth0 dhcp
-    oneshot
diff --git a/target/board/vbox_x86/system.prop b/target/board/vbox_x86/system.prop
deleted file mode 100644
index 137a0f9..0000000
--- a/target/board/vbox_x86/system.prop
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# system.prop for generic sdk
-#
-
-rild.libpath=/system/lib/libreference-ril.so
-rild.libargs=-d /dev/ttyS0
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index a714f1f..97c5bda 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -59,7 +59,6 @@ PRODUCT_MAKEFILES := \
     $(LOCAL_DIR)/aosp_mips64.mk \
     $(LOCAL_DIR)/aosp_x86_64.mk \
     $(LOCAL_DIR)/full_x86_64.mk \
-    $(LOCAL_DIR)/vbox_x86.mk \
     $(LOCAL_DIR)/sdk.mk \
     $(LOCAL_DIR)/sdk_x86.mk \
     $(LOCAL_DIR)/sdk_mips.mk \
diff --git a/target/product/vbox_x86.mk b/target/product/vbox_x86.mk
deleted file mode 100644
index a7d1b65..0000000
--- a/target/product/vbox_x86.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-ifdef NET_ETH0_STARTONBOOT
-  PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
-endif
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/vbox_x86/device.mk)
-
-PRODUCT_PACKAGES += \
-       camera.vbox_x86 \
-       lights.vbox_x86 \
-       gps.vbox_x86 \
-       sensors.vbox_x86
-
-PRODUCT_NAME := vbox_x86
-PRODUCT_DEVICE := vbox_x86
-PRODUCT_MODEL := Full Android on x86 VirtualBox