auto import from //depot/cupcake/@135843

1 files changed, 0 insertions, 200 deletions

diff --git a/core/cleanbuild.mk b/core/cleanbuild.mk
deleted file mode 100644
index 01bf9a5..0000000
--- a/core/cleanbuild.mk
+++ /dev/null
@@ -1,200 +0,0 @@
-# Copyright (C) 2007 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-INTERNAL_CLEAN_STEPS :=
-
-# Builds up a list of clean steps.  Creates a unique
-# id for each step by taking INTERNAL_CLEAN_BUILD_VERSION
-# and appending an increasing number of '@' characters.
-#
-# $(1): shell command to run
-define _add-clean-step
-  $(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \
-      $(error INTERNAL_CLEAN_BUILD_VERSION not set))
-  $(eval _acs_id := $(strip $(lastword $(INTERNAL_CLEAN_STEPS))))
-  $(if $(_acs_id),,$(eval _acs_id := $(INTERNAL_CLEAN_BUILD_VERSION)))
-  $(eval _acs_id := $(_acs_id)@)
-  $(eval INTERNAL_CLEAN_STEPS += $(_acs_id))
-  $(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1))
-  $(eval _acs_id :=)
-endef
-define add-clean-step
-$(if $(call _add-clean-step,$(1)),)
-endef
-
-# Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps.
-# cleanspec.mk is outside of the core directory so that more people
-# can have permission to touch it.
-include build/cleanspec.mk
-INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))
-
-# If the clean_steps.mk file is missing (usually after a clean build)
-# then we won't do anything.
-CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)
-CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)
-
-# Read the current state from the file, if present.
-# Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS.
-#
-clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk
--include $(clean_steps_file)
-
-ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION))
-  # The major clean version is out-of-date.  Do a full clean, and
-  # don't even bother with the clean steps.
-  $(info *** A clean build is required because of a recent change.)
-  $(shell rm -rf $(OUT_DIR))
-  $(info *** Done with the cleaning, now starting the real build.)
-else
-  # The major clean version is correct.  Find the list of clean steps
-  # that we need to execute to get up-to-date.
-  steps := \
-      $(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS))
-  $(foreach step,$(steps), \
-    $(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \
-    $(shell $(INTERNAL_CLEAN_STEP.$(step))) \
-   )
-  steps :=
-endif
-CURRENT_CLEAN_BUILD_VERSION :=
-CURRENT_CLEAN_STEPS :=
-
-# Write the new state to the file.
-#
-$(shell \
-  mkdir -p $(dir $(clean_steps_file)) && \
-  echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
-      $(clean_steps_file) ;\
-  echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \
-      $(clean_steps_file) \
- )
-
-clean_steps_file :=
-INTERNAL_CLEAN_STEPS :=
-INTERNAL_CLEAN_BUILD_VERSION :=
-
-
-# Since products and build variants (unfortunately) share the same
-# PRODUCT_OUT staging directory, things can get out of sync if different
-# build configurations are built in the same tree.  The following logic
-# will notice when the configuration has changed and remove the files
-# necessary to keep things consistent.
-
-previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk
-
-# TODO: this special case for the sdk is only necessary while "sdk"
-# is a valid make target.  Eventually, it will just be a product, at
-# which point TARGET_PRODUCT will handle it and we can avoid this check
-# of MAKECMDGOALS.  The "addprefix" is just to keep things pretty.
-ifneq ($(TARGET_PRODUCT),sdk)
-  building_sdk := $(addprefix -,$(filter sdk,$(MAKECMDGOALS)))
-else
-  # Don't bother with this extra part when explicitly building the sdk product.
-  building_sdk :=
-endif
-
-# A change in the list of locales warrants an installclean, too.
-locale_list := $(subst $(space),$(comma),$(strip $(PRODUCT_LOCALES)))
-
-current_build_config := \
-    $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)$(building_sdk)-{$(locale_list)}
-building_sdk :=
-locale_list :=
-force_installclean := false
-
-# Read the current state from the file, if present.
-# Will set PREVIOUS_BUILD_CONFIG.
-#
-PREVIOUS_BUILD_CONFIG :=
--include $(previous_build_config_file)
-PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
-ifdef PREVIOUS_BUILD_CONFIG
-  ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
-    $(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
-    force_installclean := true
-  endif
-endif  # else, this is the first build, so no need to clean.
-PREVIOUS_BUILD_CONFIG :=
-
-# Write the new state to the file.
-#
-$(shell \
-  mkdir -p $(dir $(previous_build_config_file)) && \
-  echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
-      $(previous_build_config_file) \
- )
-previous_build_config_file :=
-current_build_config :=
-
-#
-# installclean logic
-#
-
-# The files/dirs to delete during an installclean.  This includes the
-# non-common APPS directory, which may contain the wrong resources.
-# Use "./" in front of the paths to avoid accidentally deleting random
-# parts of the filesystem if any of the *_OUT vars resolve to blank.
-#
-# Deletes all of the files that change between different build types,
-# like "make user" vs. "make sdk".  This lets you work with different
-# build types without having to do a full clean each time.  E.g.:
-#
-#     $ make -j8 all
-#     $ make installclean
-#     $ make -j8 user
-#     $ make installclean
-#     $ make -j8 sdk
-#
-installclean_files := \
-	./$(HOST_OUT)/obj/NOTICE_FILES \
-	./$(HOST_OUT)/sdk \
-	./$(PRODUCT_OUT)/*.img \
-	./$(PRODUCT_OUT)/*.txt \
-	./$(PRODUCT_OUT)/*.xlb \
-	./$(PRODUCT_OUT)/*.zip \
-	./$(PRODUCT_OUT)/data \
-	./$(PRODUCT_OUT)/obj/APPS \
-	./$(PRODUCT_OUT)/obj/NOTICE_FILES \
-	./$(PRODUCT_OUT)/obj/PACKAGING \
-	./$(PRODUCT_OUT)/recovery \
-	./$(PRODUCT_OUT)/root \
-	./$(PRODUCT_OUT)/system
-
-# The files/dirs to delete during a dataclean, which removes any files
-# in the staging and emulator data partitions.
-dataclean_files := \
-	./$(PRODUCT_OUT)/data/* \
-	./$(PRODUCT_OUT)/data-qemu/* \
-	./$(PRODUCT_OUT)/userdata-qemu.img
-
-# Define the rules for commandline invocation.
-.PHONY: dataclean
-dataclean: FILES := $(dataclean_files)
-dataclean:
-	$(hide) rm -rf $(FILES)
-	@echo "Deleted emulator userdata images."
-
-.PHONY: installclean
-installclean: FILES := $(installclean_files)
-installclean: dataclean
-	$(hide) rm -rf $(FILES)
-	@echo "Deleted images and staging directories."
-
-ifeq "$(force_installclean)" "true"
-  $(info *** Forcing "make installclean"...)
-  $(shell rm -rf $(dataclean_files) $(installclean_files))
-  $(info *** Done with the cleaning, now starting the real build.)
-endif
-force_installclean :=