summaryrefslogtreecommitdiffstats
path: root/libbt
diff options
context:
space:
mode:
authorYK Jeffrey Chao <jechao@broadcom.com>2012-10-15 00:48:52 -0700
committerMatthew Xie <mattx@google.com>2012-10-16 16:27:56 -0700
commit5bbc94767d1a11f8b3b1ffeaddf98f91ee38bc04 (patch)
treeb1621d164b3a8a46cbfe349d63d333446ca3dd53 /libbt
parent0a793bd9730722fd79fe34a939bae1e9fc1bc1af (diff)
downloaddevice_common-5bbc94767d1a11f8b3b1ffeaddf98f91ee38bc04.zip
device_common-5bbc94767d1a11f8b3b1ffeaddf98f91ee38bc04.tar.gz
device_common-5bbc94767d1a11f8b3b1ffeaddf98f91ee38bc04.tar.bz2
Add support of getting factory BDADDR from Controller's non-volatile memory(2/2)
When factory Bluetooth device address is stored in the BT Controller's non-volatile memory (e.g. BCM4330 OTP memory) instead of devices's file system, the BDADDR will be retrieved from the Controller while enabling Bluedroid core stack. Introduce USE_CONTROLLER_BDADDR preprocessor directive in the vendor lib. After patchram download, check whether the BT Controller has a non-zero's BDADDR stored in its non-volatile memory. If not, write BTIF's init BDADDR to the Controller. bug 7340441 Change-Id: I2414b9479d4ef93ffd20c7ccc4875aab009e7cc8
Diffstat (limited to 'libbt')
-rw-r--r--libbt/include/bt_vendor_brcm.h18
-rwxr-xr-xlibbt/include/vnd_grouper.txt1
-rwxr-xr-xlibbt/include/vnd_tilapia.txt1
-rw-r--r--libbt/src/hardware.c78
4 files changed, 97 insertions, 1 deletions
diff --git a/libbt/include/bt_vendor_brcm.h b/libbt/include/bt_vendor_brcm.h
index 2ecc21e..fff1925 100644
--- a/libbt/include/bt_vendor_brcm.h
+++ b/libbt/include/bt_vendor_brcm.h
@@ -82,6 +82,24 @@
#define FW_PATCH_SETTLEMENT_DELAY_MS 0
#endif
+/* The Bluetooth Device Aaddress source switch:
+ *
+ * -FALSE- (default value)
+ * Get the factory BDADDR from device's file system. Normally the BDADDR is
+ * stored in the location pointed by the PROPERTY_BT_BDADDR_PATH (defined in
+ * btif_common.h file) property.
+ *
+ * -TRUE-
+ * If the Bluetooth Controller has equipped with a non-volatile memory (such
+ * as BCM4330's OTP memory), the factory BDADDR can be stored in there and
+ * retrieved by the stack while enabling BT.
+ * !!! WARNING !!! Make sure that the OTP feature has been enabled in the
+ * firmware patchram (.hcd) file.
+ */
+#ifndef USE_CONTROLLER_BDADDR
+#define USE_CONTROLLER_BDADDR FALSE
+#endif
+
/* sleep mode
0: disable
diff --git a/libbt/include/vnd_grouper.txt b/libbt/include/vnd_grouper.txt
index 3667e65..65ef840 100755
--- a/libbt/include/vnd_grouper.txt
+++ b/libbt/include/vnd_grouper.txt
@@ -7,3 +7,4 @@ BTHW_DBG = TRUE
VNDUSERIAL_DBG = FALSE
UPIO_DBG = FALSE
SCO_PCM_IF_CLOCK_RATE = 2
+USE_CONTROLLER_BDADDR = TRUE
diff --git a/libbt/include/vnd_tilapia.txt b/libbt/include/vnd_tilapia.txt
index 3667e65..65ef840 100755
--- a/libbt/include/vnd_tilapia.txt
+++ b/libbt/include/vnd_tilapia.txt
@@ -7,3 +7,4 @@ BTHW_DBG = TRUE
VNDUSERIAL_DBG = FALSE
UPIO_DBG = FALSE
SCO_PCM_IF_CLOCK_RATE = 2
+USE_CONTROLLER_BDADDR = TRUE
diff --git a/libbt/src/hardware.c b/libbt/src/hardware.c
index a6868e1..397507d 100644
--- a/libbt/src/hardware.c
+++ b/libbt/src/hardware.c
@@ -77,9 +77,11 @@
#define HCI_VSC_WRITE_PCM_DATA_FORMAT_PARAM 0xFC1E
#define HCI_VSC_WRITE_I2SPCM_INTERFACE_PARAM 0xFC6D
#define HCI_VSC_LAUNCH_RAM 0xFC4E
+#define HCI_READ_LOCAL_BDADDR 0x1009
#define HCI_EVT_CMD_CMPL_STATUS_RET_BYTE 5
#define HCI_EVT_CMD_CMPL_LOCAL_NAME_STRING 6
+#define HCI_EVT_CMD_CMPL_LOCAL_BDADDR_ARRAY 6
#define HCI_EVT_CMD_CMPL_OPCODE 3
#define LPM_CMD_PARAM_SIZE 12
#define UPDATE_BAUDRATE_CMD_PARAM_SIZE 6
@@ -107,6 +109,9 @@ enum {
HW_CFG_DL_FW_PATCH,
HW_CFG_SET_UART_BAUD_2,
HW_CFG_SET_BD_ADDR
+#if (USE_CONTROLLER_BDADDR == TRUE)
+ , HW_CFG_READ_BD_ADDR
+#endif
};
/* h/w config control block */
@@ -534,6 +539,35 @@ static uint8_t hw_config_set_bdaddr(HC_BT_HDR *p_buf)
return (retval);
}
+#if (USE_CONTROLLER_BDADDR == TRUE)
+/*******************************************************************************
+**
+** Function hw_config_read_bdaddr
+**
+** Description Read controller's Bluetooth Device Address
+**
+** Returns TRUE, if valid address is sent
+** FALSE, otherwise
+**
+*******************************************************************************/
+static uint8_t hw_config_read_bdaddr(HC_BT_HDR *p_buf)
+{
+ uint8_t retval = FALSE;
+ uint8_t *p = (uint8_t *) (p_buf + 1);
+
+ UINT16_TO_STREAM(p, HCI_READ_LOCAL_BDADDR);
+ *p = 0; /* parameter length */
+
+ p_buf->len = HCI_CMD_PREAMBLE_SIZE;
+ hw_cfg_cb.state = HW_CFG_READ_BD_ADDR;
+
+ retval = bt_vendor_cbacks->xmit_cb(HCI_READ_LOCAL_BDADDR, p_buf, \
+ hw_config_cback);
+
+ return (retval);
+}
+#endif // (USE_CONTROLLER_BDADDR == TRUE)
+
/*******************************************************************************
**
** Function hw_config_cback
@@ -552,6 +586,9 @@ void hw_config_cback(void *p_mem)
HC_BT_HDR *p_buf=NULL;
uint8_t is_proceeding = FALSE;
int i;
+#if (USE_CONTROLLER_BDADDR == TRUE)
+ const uint8_t null_bdaddr[BD_ADDR_LEN] = {0,0,0,0,0,0};
+#endif
status = *((uint8_t *)(p_evt_buf + 1) + HCI_EVT_CMD_CMPL_STATUS_RET_BYTE);
p = (uint8_t *)(p_evt_buf + 1) + HCI_EVT_CMD_CMPL_OPCODE;
@@ -735,9 +772,13 @@ void hw_config_cback(void *p_mem)
line_speed_to_userial_baud(UART_TARGET_BAUD_RATE) \
);
+#if (USE_CONTROLLER_BDADDR == TRUE)
+ if ((is_proceeding = hw_config_read_bdaddr(p_buf)) == TRUE)
+ break;
+#else
if ((is_proceeding = hw_config_set_bdaddr(p_buf)) == TRUE)
break;
-
+#endif
/* fall through intentionally */
case HW_CFG_SET_BD_ADDR:
ALOGI("vendor lib fwcfg completed");
@@ -754,6 +795,41 @@ void hw_config_cback(void *p_mem)
is_proceeding = TRUE;
break;
+
+#if (USE_CONTROLLER_BDADDR == TRUE)
+ case HW_CFG_READ_BD_ADDR:
+ p_tmp = (char *) (p_evt_buf + 1) + \
+ HCI_EVT_CMD_CMPL_LOCAL_BDADDR_ARRAY;
+
+ if (memcmp(p_tmp, null_bdaddr, BD_ADDR_LEN) == 0)
+ {
+ // Controller does not have a valid OTP BDADDR!
+ // Set the BTIF initial BDADDR instead.
+ if ((is_proceeding = hw_config_set_bdaddr(p_buf)) == TRUE)
+ break;
+ }
+ else
+ {
+ ALOGI("Controller OTP bdaddr %02X:%02X:%02X:%02X:%02X:%02X",
+ *(p_tmp+5), *(p_tmp+4), *(p_tmp+3),
+ *(p_tmp+2), *(p_tmp+1), *p_tmp);
+ }
+
+ ALOGI("vendor lib fwcfg completed");
+ bt_vendor_cbacks->dealloc(p_buf);
+ bt_vendor_cbacks->fwcfg_cb(BT_VND_OP_RESULT_SUCCESS);
+
+ hw_cfg_cb.state = 0;
+
+ if (hw_cfg_cb.fw_fd != -1)
+ {
+ close(hw_cfg_cb.fw_fd);
+ hw_cfg_cb.fw_fd = -1;
+ }
+
+ is_proceeding = TRUE;
+ break;
+#endif // (USE_CONTROLLER_BDADDR == TRUE)
} // switch(hw_cfg_cb.state)
} // if (p_buf != NULL)