1 files changed, 175 insertions, 0 deletions
diff --git a/libbt/include/userial_vendor.h b/libbt/include/userial_vendor.h
new file mode 100644
index 0000000..8e8b84f
--- /dev/null
+++ b/libbt/include/userial_vendor.h
@@ -0,0 +1,175 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      userial_vendor.h
+ *
+ *  Description:   Contains vendor-specific definitions used in serial port
+ *                 controls
+ *
+ ******************************************************************************/
+
+#ifndef USERIAL_VENDOR_H
+#define USERIAL_VENDOR_H
+
+#include "bt_vendor_brcm.h"
+#include "userial.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+/**** baud rates ****/
+#define USERIAL_BAUD_300        0
+#define USERIAL_BAUD_600        1
+#define USERIAL_BAUD_1200       2
+#define USERIAL_BAUD_2400       3
+#define USERIAL_BAUD_9600       4
+#define USERIAL_BAUD_19200      5
+#define USERIAL_BAUD_57600      6
+#define USERIAL_BAUD_115200     7
+#define USERIAL_BAUD_230400     8
+#define USERIAL_BAUD_460800     9
+#define USERIAL_BAUD_921600     10
+#define USERIAL_BAUD_1M         11
+#define USERIAL_BAUD_1_5M       12
+#define USERIAL_BAUD_2M         13
+#define USERIAL_BAUD_3M         14
+#define USERIAL_BAUD_4M         15
+#define USERIAL_BAUD_AUTO       16
+
+/**** Data Format ****/
+/* Stop Bits */
+#define USERIAL_STOPBITS_1      1
+#define USERIAL_STOPBITS_1_5    (1<<1)
+#define USERIAL_STOPBITS_2      (1<<2)
+
+/* Parity Bits */
+#define USERIAL_PARITY_NONE     (1<<3)
+#define USERIAL_PARITY_EVEN     (1<<4)
+#define USERIAL_PARITY_ODD      (1<<5)
+
+/* Data Bits */
+#define USERIAL_DATABITS_5      (1<<6)
+#define USERIAL_DATABITS_6      (1<<7)
+#define USERIAL_DATABITS_7      (1<<8)
+#define USERIAL_DATABITS_8      (1<<9)
+
+
+#if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
+/* These are the ioctl values used for bt_wake ioctl via UART driver. you may
+ * need to redefine them on you platform!
+ * Logically they need to be unique and not colide with existing uart ioctl's.
+ */
+#ifndef USERIAL_IOCTL_BT_WAKE_ASSERT
+#define USERIAL_IOCTL_BT_WAKE_ASSERT   0x8003
+#endif
+#ifndef USERIAL_IOCTL_BT_WAKE_DEASSERT
+#define USERIAL_IOCTL_BT_WAKE_DEASSERT 0x8004
+#endif
+#ifndef USERIAL_IOCTL_BT_WAKE_GET_ST
+#define USERIAL_IOCTL_BT_WAKE_GET_ST   0x8005
+#endif
+#endif // (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
+
+/******************************************************************************
+**  Type definitions
+******************************************************************************/
+
+/* Structure used to configure serial port during open */
+typedef struct
+{
+    uint16_t fmt;       /* Data format */
+    uint8_t  baud;      /* Baud rate */
+} tUSERIAL_CFG;
+
+typedef enum {
+#if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
+    USERIAL_OP_ASSERT_BT_WAKE,
+    USERIAL_OP_DEASSERT_BT_WAKE,
+    USERIAL_OP_GET_BT_WAKE_STATE,
+#endif
+    USERIAL_OP_NOP,
+} userial_vendor_ioctl_op_t;
+
+/******************************************************************************
+**  Extern variables and functions
+******************************************************************************/
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function        userial_vendor_init
+**
+** Description     Initialize userial vendor-specific control block
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_vendor_init(void);
+
+/*******************************************************************************
+**
+** Function        userial_vendor_open
+**
+** Description     Open the serial port with the given configuration
+**
+** Returns         device fd
+**
+*******************************************************************************/
+int userial_vendor_open(tUSERIAL_CFG *p_cfg);
+
+/*******************************************************************************
+**
+** Function        userial_vendor_close
+**
+** Description     Conduct vendor-specific close work
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_vendor_close(void);
+
+/*******************************************************************************
+**
+** Function        userial_vendor_set_baud
+**
+** Description     Set new baud rate
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_vendor_set_baud(uint8_t userial_baud);
+
+/*******************************************************************************
+**
+** Function        userial_vendor_ioctl
+**
+** Description     ioctl inteface
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_vendor_ioctl(userial_vendor_ioctl_op_t op, void *p_data);
+
+#endif /* USERIAL_VENDOR_H */
+