Create a base aries device to be inherited by the variants.

1 files changed, 163 insertions, 0 deletions

diff --git a/device_base.mk b/device_base.mk
new file mode 100644
index 0000000..7f44191
--- /dev/null
+++ b/device_base.mk
@@ -0,0 +1,163 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# This file is the device-specific product definition file for
+# crespo. It lists all the overlays, files, modules and properties
+# that are specific to this hardware: i.e. those are device-specific
+# drivers, configuration files, settings, etc...
+
+# Note that crespo is not a fully open device. Some of the drivers
+# aren't publicly available in all circumstances, which means that some
+# of the hardware capabilities aren't present in builds where those
+# drivers aren't available. Such cases are handled by having this file
+# separated into two halves: this half here contains the parts that
+# are available to everyone, while another half in the vendor/ hierarchy
+# augments that set with the parts that are only relevant when all the
+# associated drivers are available. Aspects that are irrelevant but
+# harmless in no-driver builds should be kept here for simplicity and
+# transparency. There are two variants of the half that deals with
+# the unavailable drivers: one is directly checked into the unreleased
+# vendor tree and is used by engineers who have access to it. The other
+# is generated by setup-makefile.sh in the same directory as this files,
+# and is used by people who have access to binary versions of the drivers
+# but not to the original vendor tree. Be sure to update both.
+
+
+# These is the hardware-specific overlay, which points to the location
+# of hardware-specific resource overrides, typically the frameworks and
+# application settings that are stored in resourced.
+DEVICE_PACKAGE_OVERLAYS := device/samsung/aries-common/overlay
+
+# These are the hardware-specific configuration files
+PRODUCT_COPY_FILES := \
+	device/samsung/aries-common/vold.fstab:system/etc/vold.fstab \
+	device/samsung/aries-common/egl.cfg:system/lib/egl/egl.cfg \
+	device/samsung/aries-common/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc
+
+# Init files
+PRODUCT_COPY_FILES += \
+	device/samsung/aries-common/init.aries.rc:root/init.aries.rc \
+        device/samsung/aries-common/init.aries.usb.rc:root/init.aries.usb.rc \
+	device/samsung/aries-common/lpm.rc:root/lpm.rc \
+	device/samsung/aries-common/ueventd.aries.rc:root/ueventd.aries.rc \
+	device/samsung/aries-common/setupenv.sh:recovery/root/sbin/setupenv.sh
+
+# Prebuilt kl keymaps
+PRODUCT_COPY_FILES += \
+	device/samsung/aries-common/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \
+	device/samsung/aries-common/sec_jack.kl:system/usr/keylayout/sec_jack.kl \
+	device/samsung/aries-common/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl
+
+# Generated kcm keymaps
+PRODUCT_PACKAGES := \
+       cypress-touchkey.kcm \
+       s3c-keypad.kcm
+
+# Filesystem management tools
+PRODUCT_PACKAGES += \
+	make_ext4fs \
+	setup_fs
+
+# These are the OpenMAX IL configuration files
+PRODUCT_COPY_FILES += \
+	device/samsung/aries-common/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \
+	device/samsung/aries-common/media_profiles.xml:system/etc/media_profiles.xml
+
+# These are the OpenMAX IL modules
+PRODUCT_PACKAGES += \
+	libSEC_OMX_Core.aries \
+	libOMX.SEC.AVC.Decoder.aries \
+	libOMX.SEC.M4V.Decoder.aries \
+	libOMX.SEC.M4V.Encoder.aries \
+	libOMX.SEC.AVC.Encoder.aries
+
+# Misc other modules
+PRODUCT_PACKAGES += \
+	lights.aries \
+	sensors.aries \
+	audio.primary.aries \
+	audio_policy.aries
+
+# Libs
+PRODUCT_PACKAGES += \
+	libstagefrighthw
+
+# Bluetooth MAC Address
+PRODUCT_PACKAGES += \
+	bdaddr_read
+
+# Device-specific packages
+PRODUCT_PACKAGES += \
+	SamsungServiceMode \
+	AriesParts
+
+# apns config file
+PRODUCT_COPY_FILES += \
+	development/data/etc/apns-conf.xml:system/etc/apns-conf.xml
+
+# These are the hardware-specific features
+PRODUCT_COPY_FILES += \
+	frameworks/base/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
+	frameworks/base/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
+	frameworks/base/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
+	frameworks/base/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
+        frameworks/base/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml \
+	frameworks/base/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
+	frameworks/base/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
+	frameworks/base/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
+	frameworks/base/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
+	frameworks/base/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
+	frameworks/base/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
+	packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml
+
+# The OpenGL ES API level that is natively supported by this device.
+# This is a 16.16 fixed point number
+PRODUCT_PROPERTY_OVERRIDES := \
+    ro.opengles.version=131072
+
+# These are the hardware-specific settings that are stored in system properties.
+# Note that the only such settings should be the ones that are too low-level to
+# be reachable from resources or other mechanisms.
+PRODUCT_PROPERTY_OVERRIDES += \
+       wifi.interface=eth0 \
+       wifi.supplicant_scan_interval=20 \
+       ro.telephony.ril_class=samsung \
+       ro.telephony.ril.v3=1 \
+       mobiledata.interfaces=pdp0,eth0,gprs,ppp0 \
+       dalvik.vm.heapsize=32m
+
+# enable Google-specific location features,
+# like NetworkLocationProvider and LocationCollector
+PRODUCT_PROPERTY_OVERRIDES += \
+        ro.com.google.locationfeatures=1 \
+        ro.com.google.networklocation=1
+
+# Extended JNI checks
+# The extended JNI checks will cause the system to run more slowly, but they can spot a variety of nasty bugs 
+# before they have a chance to cause problems.
+# Default=true for development builds, set by android buildsystem.
+PRODUCT_PROPERTY_OVERRIDES += \
+    ro.kernel.android.checkjni=0 \
+    dalvik.vm.checkjni=false
+
+# Set default USB interface
+PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
+    persist.sys.usb.config=mtp
+
+# we have enough storage space to hold precise GC data
+PRODUCT_TAGS += dalvik.gc.type-precise
+
+PRODUCT_COPY_FILES += \
+	device/samsung/aries-common/updater.sh:updater.sh