Add overlay

2 files changed, 253 insertions, 0 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
new file mode 100644
index 0000000..ff9fa6c
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -0,0 +1,193 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources>
+    <!-- Flag indicating whether we should enable the automatic brightness in Settings.
+         config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
+    <bool name="config_automatic_brightness_available">true</bool>
+
+    <!-- There is no charging LED. -->
+    <bool name="config_unplugTurnsOnScreen">true</bool>
+
+    <!-- Our amoled doesn't animate well. -->
+    <bool name="config_animateScreenLights">false</bool>
+
+    <!-- disable menu hard key on Crespo in non-pattern lockscreen -->
+    <bool name="config_disableMenuKeyInLockScreen">true</bool>
+
+    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
+         The N entries of this array define N + 1 zones as follows:
+
+         Zone 0:        0 <= LUX < array[0]
+         Zone 1:        array[0] <= LUX < array[1]
+         ...
+         Zone N:        array[N - 1] <= LUX < array[N]
+         Zone N + 1:    array[N] <= LUX < infinity
+
+         Must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>10</item>
+        <item>160</item>
+        <item>225</item>
+        <item>320</item>
+        <item>640</item>
+        <item>1280</item>
+        <item>2600</item>
+        <item>10240</item>
+    </integer-array>
+
+    <!-- Array of output values for LCD backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+    -->
+    <integer-array name="config_autoBrightnessLcdBacklightValues">
+        <item>20</item>
+        <item>20</item>
+        <item>20</item>
+        <item>20</item>
+        <item>35</item>
+        <item>50</item>
+        <item>50</item>
+        <item>100</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- Array of output values for button backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+    -->
+    <integer-array name="config_autoBrightnessButtonBacklightValues">
+        <item>255</item>
+        <item>255</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+    </integer-array>
+
+    <!-- Array of output values for keyboard backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+         Crespo has no keyboard so all values are zero.
+    -->
+    <integer-array name="config_autoBrightnessKeyboardBacklightValues">
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+    </integer-array>
+    
+    <!-- Component name of the default wallpaper. This will be ImageWallpaper if not 
+         specified -->
+    <string name="default_wallpaper_component">com.android.wallpaper/.nexus.NexusWallpaper</string>
+
+    <integer name="config_deskDockKeepsScreenOn">0</integer>
+    <integer name="config_carDockKeepsScreenOn">1</integer>
+
+    <!-- Default color for notification LED is white -->
+    <color name="config_defaultNotificationColor">#ffffffff</color>
+
+    <!-- Default blink frequency for notification LED is 9 seconds. -->
+    <integer name="config_defaultNotificationLedOff">9000</integer>
+
+    <!-- Component name of the service providing network location support. -->
+    <string name="config_networkLocationProvider">com.google.android.location.NetworkLocationProvider</string>
+
+    <!-- Component name of the service providing geocoder API support. -->
+    <string name="config_geocodeProvider">com.google.android.location.GeocodeProvider</string>
+
+
+    <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
+         Please don't copy them, copy anything else. -->
+
+    <!-- This string array should be overridden by the device to present a list of network
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
+         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
+    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
+         before automatically restore the default connection.  Set -1 if the connection
+         does not require auto-restore. -->
+    <!-- the 6th element indicates boot-time dependency-met value. -->
+    <string-array translatable="false" name="networkAttributes">
+        <item>"wifi,1,1,1,-1,true"</item>
+        <item>"mobile,0,0,0,-1,true"</item>
+        <item>"mobile_mms,2,0,2,60000,true"</item>
+        <item>"mobile_supl,3,0,2,60000,true"</item>
+        <item>"mobile_dun,4,0,4,60000,true"</item>
+        <item>"mobile_hipri,5,0,3,60000,true"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         USB interfaces.  If the device doesn't want to support tething over USB this should
+         be empty.  An example would be "usb.*" -->
+    <string-array translatable="false" name="config_tether_usb_regexs">
+        <item>"usb0"</item>
+    </string-array>
+
+    <!-- Regex array of allowable upstream ifaces for tethering - for example if you want
+         tethering on a new interface called "foo2" add <item>"foo\\d"</item> to the array -->
+    <!--
+    <string-array translatable="false" name="config_tether_upstream_regexs">
+        <item>"pdp\\d"</item>
+        <item>"eth\\d"</item>
+    </string-array>
+    -->
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
+         should be empty.  An example would be "softap.*" -->
+    <string-array translatable="false" name="config_tether_wifi_regexs">
+        <item>"wl0.1"</item>
+    </string-array>
+
+
+    <!-- Boolean indicating if we require the use of DUN on mobile for tethering -->
+    <!--
+    <bool translatable="false" name="config_tether_dun_required">false</bool>
+    -->
+
+    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
+    <integer-array name="config_keyboardTapVibePattern">
+        <item>30</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
+    <integer-array name="config_safeModeDisabledVibePattern">
+        <item>1</item>
+    </integer-array>
+
+    <!-- crespo doesn't handle this blur effect very quickly. -->
+    <bool name="config_sf_slowBlur">true</bool>
+
+
+    <!-- Boolean indicating if restoring network selection should be skipped -->
+    <!-- The restoring is handled by modem if it is true -->
+    <bool translatable="false" name="skip_restoring_network_selection">true</bool>
+</resources>
diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
new file mode 100644
index 0000000..a00f060
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License")
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<device name="Android">
+  <item name="none">0</item>
+  <item name="screen.on">49</item>
+  <item name="bluetooth.active">142</item> <!-- In call -->
+  <item name="bluetooth.on">0.3</item>
+  <!-- CPU wakelock held for 830ms on bluetooth headset at command. 43mA * 830 -->
+  <item name="bluetooth.at">35690</item>
+  <item name="screen.full">260</item>
+  <item name="wifi.on">4</item>
+  <item name="wifi.active">120</item>
+  <item name="wifi.scan">220</item>
+  <item name="dsp.audio">88</item>
+  <item name="dsp.video">88</item>
+  <item name="radio.active">185</item>
+  <item name="gps.on">50</item>
+  <item name="battery.capacity">1500</item>
+  <item name="radio.scanning">88</item>
+  <array name="radio.on"> <!-- Strength 0 to BINS-1 -->
+      <value>3.4</value>
+      <value>3.4</value>
+  </array>
+  <array name="cpu.speeds">
+    <value>100000</value>
+    <value>200000</value>
+    <value>400000</value>
+    <value>800000</value>
+    <value>1000000</value>
+  </array>
+  <!-- Power consumption in suspend -->
+  <item name="cpu.idle">1.4</item>
+  <!-- Power consumption due to wake lock held -->
+  <item name="cpu.awake">44</item>
+  <!-- Power consumption at different speeds -->
+  <array name="cpu.active">
+      <value>55.4</value>
+      <value>82.1</value>
+      <value>113.7</value>
+      <value>205.4</value>
+      <value>259.0</value>
+  </array>
+</device>