Move some files to the open-source side

Bug:3267987
Change-Id: If89b949d4829457c1eb3cd0e4790ca3d06982f56

6 files changed, 117 insertions, 0 deletions

diff --git a/device.mk b/device.mk
index 6969b16..b028f3c 100644
--- a/device.mk
+++ b/device.mk
@@ -38,6 +38,11 @@
 PRODUCT_COPY_FILES := \
 	frameworks/base/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml
 
+# GPS config
+PRODUCT_COPY_FILES += \
+        device/samsung/crespo/gps.xml:system/vendor/etc/gps.xml \
+        device/samsung/crespo/gps.conf:system/etc/gps.conf
+
 $(call inherit-product, device/samsung/crespo/device_base.mk)
 
 # See comment at the top of this file. This is where the other
diff --git a/device_base.mk b/device_base.mk
index fb0c9c2..9aac5d4 100644
--- a/device_base.mk
+++ b/device_base.mk
@@ -62,6 +62,14 @@ PRODUCT_COPY_FILES += \
 	device/samsung/crespo/sec_jack.kl:system/usr/keylayout/sec_jack.kl \
 	device/samsung/crespo/sec_jack.kcm:system/usr/keychars/sec_jack.kcm
 
+#NVRAM setup
+PRODUCT_COPY_FILES += \
+        device/samsung/crespo/nvram_net.txt:system/vendor/firmware/nvram_net.txt
+
+#MFC Firmware
+PRODUCT_COPY_FILES += \
+        device/samsung/crespo/samsung_mfc_fw.bin:system/vendor/firmware/samsung_mfc_fw.bin
+
 # Generated kcm keymaps
 PRODUCT_PACKAGES := \
 	s3c-keypad.kcm \
diff --git a/gps.conf b/gps.conf
new file mode 100644
index 0000000..bd431a6
--- /dev/null
+++ b/gps.conf
@@ -0,0 +1,6 @@
+NTP_SERVER=north-america.pool.ntp.org

+XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin

+XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin

+XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin

+SUPL_HOST=supl.google.com

+SUPL_PORT=7276

diff --git a/gps.xml b/gps.xml
new file mode 100755
index 0000000..15b7cc6
--- /dev/null
+++ b/gps.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<glgps xmlns="http://www.glpals.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.glpals.com/ glconfig.xsd" >
+  <!--HAL Confguration  -->
+  <hal 
+	   acPortName="/dev/s3c2410_serial1" lBaudRate="115200"  cLogEnabled="false" cLogEnableInitState="false" acLogDirectory="/data/gps/log/" ltoFileName="lto2.dat" 
+       enhanced-assisted="false" cp-enhanced-assisted="true" TISEnabled="false" RILEnabled="true" LPmode="false" cp-cold-start="false" cp-guard-time-sec="2"
+       arp-supl-enable="true" arp-supl-cap-msb="true" arp-supl-cap-msa="true" arp-supl-cap-ecid="false"
+	   acSuplServer="supl.google.com" SuplPort="7276"
+       LbsEnable="true" LbsLocal="false" LbsServer="bcmls2.glpals.com" LbsPort="7275" LbsSyncLto="true" LbsSyncCells="true" LbsWlanEnable="false"       
+       LbsSyncLtoThresholdDays="3"
+       gpioNStdbyPath="/sys/class/sec/gps/GPS_PWR_EN/value"
+       gpioNResetPath="/sys/class/sec/gps/GPS_nRST/value"
+       gpioDelayMs="250"
+       lcsApiSockName="/dev/socket/gps"
+       acNvStoDir="/data/gps/"
+       />
+
+  <!-- Parameters passed to GlEngine   -->
+  <!--gll
+         LogPriMask="LOG_DEBUG"
+         LogFacMask="LOG_GLLAPI | LOG_DEVIA | LOG_NMEA | LOG_RAWDATA | LOG_DEVMS | LOG_ASIC_IO | LOG_BBTEST | LOG_DEVET | LOG_MESM | LOG_DEVKF | LOG_DEVJG | LOG_DEVMR" 
+         FrqPlan="FRQ_PLAN_10MHZ_2PPM_10MHZ_100PPB" FrqPlan="FRQ_PLAN_10MHZ_2PPM" "FRQ_PLAN_16_8MHZ_2PPM"
+         RfType="GL_RF_PALS7" "GL_RF_BARRACUDA" "GL_RF_2075_LN22" "GL_RF_2075_BRCM" "GL_RF_PALS7_BRCM" "GL_RF_BARRACUDA_BRCM" "GL_RF_BARRACUDA_EXT_LNA"
+         NOTE: "GL_RF_BARRACUDA_EXT_LNA" should be used for BAS
+         LbsEnable="true" LbsLocal="true" LbsServer="bcmlbsqa1.glpals.com" LbsPort="7275" LbsSyncTimeSec = "60" LbsSyncLto="true" LbsSyncCells="true"
+  /-->
+
+  <!-- NOTE: BrcmRFwildBase, BrcmRFclkDiv, anBrcmRFclkRefHz only needed for Broadcom RF front end test chips
+            ( i.e. GL_RF_2075_BRCM and GL_RF_PALS7_BRCM ) -->
+
+  <gll 
+       LogPriMask="LOG_DEBUG"
+       LogFacMask="LOG_GLLAPI | LOG_DEVIA | LOG_NMEA | LOG_RAWDATA | LOG_DEVMS | LOG_ASIC_IO | LOG_BBTEST | LOG_DEVET | LOG_MESM | LOG_DEVKF | LOG_DEVJG | LOG_DEVMR" 
+       FrqPlan="FRQ_PLAN_26MHZ_2PPM_26MHZ_300PPB"   
+       RfType="GL_RF_4751_DANUBE_EXT_LNA"
+       WarmStandbyTimeout1Seconds="5"
+       WarmStandbyTimeout2Seconds="10"       
+    >   
+  </gll>
+</glgps>
diff --git a/nvram_net.txt b/nvram_net.txt
new file mode 100755
index 0000000..f27f4a4
--- /dev/null
+++ b/nvram_net.txt
@@ -0,0 +1,58 @@
+sromrev=3
+vendid=0x14e4
+devid=0x432f
+boardtype=0x569
+boardrev=0x32
+boardflags=0x200
+xtalfreq=38400
+aa2g=1
+aa5g=0
+ag0=255
+
+# 11g paparams
+pa0b0=5585,5585,5757
+pa0b1=64174,64174,64201
+pa0b2=65162,65162,65207
+pa0itssit=62
+pa0maxpwr=77
+mcs2gpo0=0xaaaa
+mcs2gpo1=0xaaaa
+ofdmpo=0x66666666
+
+# 11g rssi params
+rssismf2g=0xa,0xa,0xa
+rssismc2g=0xb,0xb,0xa
+rssisav2g=0x3,0x3,0x3
+
+bxa2g=0
+rxpo2g=2
+tri2g=98
+
+# country code
+ccode=US
+cctl=0x0
+cckdigfilttype=6
+ofdmdigfilttype=1
+
+boardnum=1
+#macaddr=00:90:4c:c5:00:34
+#macaddr=00:11:22:33:44:55
+
+#######
+nocrc=1
+
+#for mfgc
+otpimagesize=182
+
+# sdio extra configs
+hwhdr=0x05ffff031030031003100000
+
+#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
+#RAW1=80 02 fe ff
+
+#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
+RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
+
+#for BT-coexistence
+btc_params80=0
+btc_params6=10
diff --git a/samsung_mfc_fw.bin b/samsung_mfc_fw.bin
new file mode 100644
index 0000000..67483e0
--- /dev/null
+++ b/samsung_mfc_fw.bin