diff options
author | Andreas Blaesius <skate4life@gmx.de> | 2015-05-21 18:57:10 +0200 |
---|---|---|
committer | Andreas Blaesius <skate4life@gmx.de> | 2015-05-23 11:20:28 +0000 |
commit | 811d072ac98719c8d318e93cddb265be2936ab42 (patch) | |
tree | 5421b1716734ba179eba80176372b9c0ae5f9394 /overlay/aosp-common/frameworks/base/core | |
parent | c03feafd6b1426f77e54480747e266834db9c752 (diff) | |
download | device_samsung_espressowifi-811d072ac98719c8d318e93cddb265be2936ab42.zip device_samsung_espressowifi-811d072ac98719c8d318e93cddb265be2936ab42.tar.gz device_samsung_espressowifi-811d072ac98719c8d318e93cddb265be2936ab42.tar.bz2 |
P31XX: rework overlay
Split CM and AOSP specific overlay
Change-Id: Ia1cca2ef645ad6502b8b1e444697107751c9f142
Diffstat (limited to 'overlay/aosp-common/frameworks/base/core')
5 files changed, 409 insertions, 0 deletions
diff --git a/overlay/aosp-common/frameworks/base/core/res/res/values-large/config.xml b/overlay/aosp-common/frameworks/base/core/res/res/values-large/config.xml new file mode 100644 index 0000000..f37c798 --- /dev/null +++ b/overlay/aosp-common/frameworks/base/core/res/res/values-large/config.xml @@ -0,0 +1,23 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/* +** Copyright 2009, The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License"); +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> +<!-- These resources are around just to allow their values to be customized + for different hardware and product builds. Do not translate. --> +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + <integer name="config_longPressOnPowerBehavior">1</integer> +</resources> diff --git a/overlay/aosp-common/frameworks/base/core/res/res/values-sw600dp/config.xml b/overlay/aosp-common/frameworks/base/core/res/res/values-sw600dp/config.xml new file mode 100644 index 0000000..f37c798 --- /dev/null +++ b/overlay/aosp-common/frameworks/base/core/res/res/values-sw600dp/config.xml @@ -0,0 +1,23 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/* +** Copyright 2009, The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License"); +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> +<!-- These resources are around just to allow their values to be customized + for different hardware and product builds. Do not translate. --> +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + <integer name="config_longPressOnPowerBehavior">1</integer> +</resources> diff --git a/overlay/aosp-common/frameworks/base/core/res/res/values/config.xml b/overlay/aosp-common/frameworks/base/core/res/res/values/config.xml new file mode 100644 index 0000000..673a541 --- /dev/null +++ b/overlay/aosp-common/frameworks/base/core/res/res/values/config.xml @@ -0,0 +1,249 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/* +** Copyright 2009, The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License"); +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> + +<!-- These resources are around just to allow their values to be customized + for different hardware and product builds. Do not translate. --> +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + + <!-- Flag indicating whether the surface flinger has limited + alpha compositing functionality in hardware. If set, the window + manager will disable alpha trasformation in animations where not + strictly needed. --> + <bool name="config_sf_limitedAlpha">true</bool> + + <!-- List of regexpressions describing the interface (if any) that represent tetherable + USB interfaces. If the device doesn't want to support tething over USB this should + be empty. An example would be "usb.*" --> + <string-array translatable="false" name="config_tether_usb_regexs"> + <item>"rndis0"</item> + </string-array> + + <!-- List of regexpressions describing the interface (if any) that represent tetherable + WiMAX interfaces. If the device doesn't want to support tethering over Wifi this + should be empty. An example would be "softap.*" --> + <string-array translatable="false" name="config_tether_wifi_regexs"> + <item>"wlan0"</item> + </string-array> + + <!-- List of regexpressions describing the interface (if any) that represent tetherable + bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this + should be empty. --> + <string-array translatable="false" name="config_tether_bluetooth_regexs"> + <item>"bt-pan"</item> + </string-array> + + <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> + <bool translatable="false" name="config_wifi_dual_band_support">true</bool> + + <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism. + This mechanism allows the host to remain in suspend state and the dongle to actively + scan and wake the host when a configured SSID is detected by the dongle. This chipset + capability can provide power savings when wifi needs to be always kept on. --> + <bool translatable="false" name="config_wifi_background_scan_support">true</bool> + + <!-- Flag indicating whether the we should enable the automatic brightness in Settings. + Software implementation will be used if config_hardware_auto_brightness_available is not set --> + <bool name="config_automatic_brightness_available">true</bool> + + <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> + <bool name="config_unplugTurnsOnScreen">true</bool> + + <!-- If this is true, the screen will fade off. --> + <bool name="config_animateScreenLights">true</bool> + + <!-- If true, the screen can be rotated via the accelerometer in all 4 + rotations as the default behavior. --> + <bool name="config_allowAllRotations">true</bool> + + <!-- Indicate whether the SD card is accessible without removing the battery. --> + <bool name="config_batterySdCardAccessibility">true</bool> + + <!-- Vibrator pattern for feedback about a long screen/key press --> + <integer-array name="config_longPressVibePattern"> + <item>20</item> + <item>40</item> + </integer-array> + + <!-- Vibrator pattern for feedback about touching a virtual key --> + <integer-array name="config_virtualKeyVibePattern"> + <item>0</item> + <item>15</item> + <item>25</item> + <item>35</item> + </integer-array> + + <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> + <integer-array name="config_keyboardTapVibePattern"> + <item>50</item> + </integer-array> + + <!-- Screen brightness used to dim the screen when the user activity + timeout expires. May be less than the minimum allowed brightness setting + that can be set by the user. --> + <integer name="config_screenBrightnessDim">20</integer> + + <!-- Minimum allowable screen brightness to use in a very dark room. + This value sets the floor for the darkest possible auto-brightness + adjustment. It is expected to be somewhat less than the first entry in + config_autoBrightnessLcdBacklightValues so as to allow the user to have + some range of adjustment to dim the screen further than usual in very + dark rooms. The contents of the screen must still be clearly visible + in darkness (although they may not be visible in a bright room). --> + <integer name="config_screenBrightnessDark">5</integer> + + <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. + The N entries of this array define N + 1 control points as follows: + (1-based arrays) + + Point 1: (0, value[1]): lux <= 0 + Point 2: (level[1], value[2]): 0 < lux <= level[1] + Point 3: (level[2], value[3]): level[2] < lux <= level[3] + ... + Point N+1: (level[N], value[N+1]): level[N] < lux + + The control points must be strictly increasing. Each control point + corresponds to an entry in the brightness backlight values arrays. + For example, if LUX == level[1] (first element of the levels array) + then the brightness will be determined by value[2] (second element + of the brightness values array). + + Spline interpolation is used to determine the auto-brightness + backlight values for LUX levels between these control points. + + Must be overridden in platform specific overlays --> + <integer-array name="config_autoBrightnessLevels"> + <item>6</item> + <item>12</item> + <item>18</item> + <item>28</item> + <item>40</item> + <item>65</item> + <item>100</item> + <item>150</item> + <item>250</item> + <item>350</item> + <item>500</item> + <item>800</item> + <item>1200</item> + <item>1800</item> + <item>3000</item> + <item>6000</item> + <item>12000</item> + <item>24000</item> + <item>36000</item> + <item>42700</item> + </integer-array> + + <!-- Array of output values for LCD backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + The brightness values must be between 0 and 255 and be non-decreasing. + This must be overridden in platform specific overlays --> + <integer-array name="config_autoBrightnessLcdBacklightValues"> + <item>30</item> + <item>33</item> + <item>36</item> + <item>40</item> + <item>45</item> + <item>50</item> + <item>55</item> + <item>60</item> + <item>70</item> + <item>80</item> + <item>90</item> + <item>100</item> + <item>120</item> + <item>150</item> + <item>180</item> + <item>200</item> + <item>210</item> + <item>220</item> + <item>230</item> + <item>240</item> + <item>250</item> + </integer-array> + + <!-- Array of output values for button backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + The brightness values must be between 0 and 255 and be non-decreasing. + This must be overridden in platform specific overlays --> + <integer-array name="config_autoBrightnessButtonBacklightValues"> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + </integer-array> + + <!-- Array of output values for keyboard backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + + Note: Galaxy Tab 2 has no keyboard so all values are zero. + --> + <integer-array name="config_autoBrightnessKeyboardBacklightValues"> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + </integer-array> + + <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be + autodetected from the Configuration. --> + <bool name="config_showNavigationBar">true</bool> + + <!-- Maximum number of supported users --> + <integer name="config_multiuserMaximumUsers">5</integer> + <!-- Whether UI for multi user should be shown --> + <bool name="config_enableMultiUserUI">true</bool> +</resources> diff --git a/overlay/aosp-common/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/aosp-common/frameworks/base/core/res/res/xml/power_profile.xml new file mode 100644 index 0000000..8dc8f8f --- /dev/null +++ b/overlay/aosp-common/frameworks/base/core/res/res/xml/power_profile.xml @@ -0,0 +1,62 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +** +** Copyright 2009, The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License") +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> +<device name="Android"> + <item name="none">0</item> + <item name="screen.on">247</item> + <item name="bluetooth.active">30</item> + <item name="bluetooth.on">1</item> + <item name="bluetooth.at">35690</item> + <item name="screen.full">630</item> + <item name="wifi.on">13</item> + <item name="wifi.active">90</item> + <item name="wifi.scan">170</item> + <item name="dsp.audio">120</item> + <item name="dsp.video">758</item> + <item name="radio.active">139</item> + <item name="radio.scanning">25</item> + <item name="gps.on">40</item> + <array name="radio.on"> + <value>4</value> + <value>4</value> + </array> + + <array name="cpu.speeds"> + <value>1504000</value> + <value>1400000</value> + <value>1200000</value> + <value>1000000</value> + <value>800000</value> + <value>600000</value> + <value>300000</value> + </array> + + <item name="cpu.idle">2.9</item> + <array name="cpu.active"> + <value>530</value> + <value>470</value> + <value>370</value> + <value>280</value> + <value>200</value> + <value>120</value> + <value>40</value> + </array> + + <!-- This is the battery capacity in mAh --> + <item name="battery.capacity">6860</item> +</device> diff --git a/overlay/aosp-common/frameworks/base/core/res/res/xml/storage_list.xml b/overlay/aosp-common/frameworks/base/core/res/res/xml/storage_list.xml new file mode 100644 index 0000000..4fd2907 --- /dev/null +++ b/overlay/aosp-common/frameworks/base/core/res/res/xml/storage_list.xml @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +** +** Copyright 2011, The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License") +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> + +<!-- The <device> element should contain one or more <storage> elements. + Exactly one of these should have the attribute primary="true". + This storage will be the primary external storage and should have mountPoint="/mnt/sdcard". + Each storage should have both a mountPoint and storageDescription attribute. + The following attributes are optional: + + primary: (boolean) this storage is the primary external storage + removable: (boolean) this is removable storage (for example, a real SD card) + emulated: (boolean) the storage is emulated via the FUSE sdcard daemon + mtpReserve: (integer) number of megabytes of storage MTP should reserve for free storage + (used for emulated storage that is shared with system's data partition) + + A storage should not have both emulated and removable set to true +--> + +<StorageList xmlns:android="http://schemas.android.com/apk/res/android"> + <!-- internal emulated storage --> + <storage + android:storageDescription="@string/storage_internal" + android:emulated="true" + android:primary="true" + android:mtpReserve="100" /> + + <storage android:mountPoint="/storage/sdcard1" + android:storageDescription="@string/storage_sd_card" + android:primary="false" + android:removable="true" /> + + <storage android:mountPoint="/storage/usbdisk0" + android:storageDescription="@string/storage_usb" + android:primary="false" + android:removable="true" /> +</StorageList> |