1 files changed, 156 insertions, 0 deletions
diff --git a/configs/nvram_net.txt_murata b/configs/nvram_net.txt_murata
new file mode 100644
index 0000000..e8ecdad
--- /dev/null
+++ b/configs/nvram_net.txt_murata
@@ -0,0 +1,156 @@
+# Kona Emual Rev0.3 2012.08.21-TSSI
+
+manfid=0x2d0
+prodid=0x05de
+vendid=0x14e4
+devid=0x4380
+boardtype=0x05de
+boardrev=0x1205
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=3
+#boardflags: 5GHz FEM: has ext 5GHz PA + LNA
+#            2.4GHz FEM: has ext 2.4GHz PA + SP3T
+#            2.4GHz FEM: SP3T switch share with BT
+#            keep original 0x200
+boardflags=0x10081a01
+xtalfreq=37400
+nocrc=1
+ag0=0
+aa2g=1
+ccode=XZ
+regrev=11
+pa0itssit=0x20
+#PA parameters for 2.4GHz-8/21 TSSI
+pa0b0=0x14B6
+pa0b1=0xFD8C
+pa0b2=0xFF5E
+
+tssifloor2g=30
+extpagain2g=2
+extpagain5g=2
+
+# rssi params for 2.4GHz
+rssismf2g=0xf
+rssismc2g=0x8
+rssisav2g=0x1
+# rssi params(RFMD) for 2.4GHz
+#rssismf2g=0x3
+#rssismc2g=0xa
+#rssisav2g=0x1
+
+cckPwrOffset=3
+cckdigfilttype=24
+#PwrOffset40mhz2g=-10
+# rssi params for 5GHz
+rssismf5g=0xf
+rssismc5g=0x7
+rssisav5g=0x1
+#PA parameters for lower a-band-8/21 TSSI
+pa1lob0=0x1AF2
+pa1lob1=0xFCC8
+pa1lob2=0xFF52
+tssifloor5gl=30
+#PA parameters for midband-8/21 TSSI
+pa1b0=0x1AA0
+pa1b1=0xFCC9
+pa1b2=0xFF45
+tssifloor5gm=30
+#PA paramasdeters for high band-8/21 TSSI
+pa1hib0=0x1D27
+pa1hib1=0xFC8E
+pa1hib2=0xFF59
+tssifloor5gh=30
+rxpo5g=0
+maxp2ga0=72
+# 2GTxPwr Backoff
+ofdm2gpo=0x66666666
+mcs2gpo0=0x8888
+mcs2gpo1=0x8888
+maxp5ga0=66
+maxp5gla0=66
+maxp5gha0=66
+# 5GTxPwr Backoff
+ofdm5gpo=0x33333333
+ofdm5glpo=0x33333333
+ofdm5ghpo=0x33333333
+mcs5gpo0=0x4444
+mcs5gpo1=0x4444
+mcs5glpo0=0x4444
+mcs5glpo1=0x4444
+mcs5ghpo0=0x4444
+mcs5ghpo1=0x4444
+# 5GTxPwr HT40 Backoff
+mcs5gpo2=0x6666
+mcs5gpo3=0x6666
+mcs5glpo2=0x6666
+mcs5glpo3=0x6666
+mcs5ghpo2=0x6666
+mcs5ghpo3=0x6666
+# 4334B1FCBGA -16, 4334B2FCBGA 4, 4334B2WLBGA -7
+PwrOffset40mhz5g=-7
+
+#ofdmdigfilttype=3
+ofdmdigfilttype2g=3
+ofdmdigfilttype5g=3
+#ofdm40digfilttype=5 -8/21-comment out
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+pagc2g=0x10
+
+# Parameters for DAC2x mode and ALPF bypass
+dacrate2xen=1
+txalpfbyp=1
+txalpfpu=1
+
+#Murata 2G & 5G FEM switch control table
+swctrlmap_2g=0x00400040,0x06060606,0x02020202,0x10302,0x1ff
+swctrlmap_5g=0x08080808,0x30303030,0x10101010,0x10302,0x2f8
+
+elna_off_gain_idx_2g=32
+#elna_off_gain_idx_5g=TBD
+triso2g=8
+triso5g=7
+
+muxenab=0x10
+dacpu.fab.4=1
+
+aci_detect_en_2g=1
+
+#EPA_or_PAD_lpbck5g=1
+lpbckmode5g=1
+txiqlopapu5g=0
+iqcalidx5g=50
+txiqlopapu2g=0
+dlorange_lowlimit=5
+loflag=1
+
+###iqlocalidx5g=50
+###iqlocalidx5g=70 75 80
+iqlocalidx5g=45
+
+### dlocalidx5g should be greater than iqlocalidx5g by at least 20 index steps
+###dlocalidx5g=90
+dlocalidx5g=65
+
+gain_settle_dly_2g=4
+gain_settle_dly_5g=4
+noise_cal_po_2g=-1
+noise_cal_po_40_2g=-1
+noise_cal_high_gain_2g=73
+noise_cal_nf_substract_val_2g=346
+noise_cal_po_5g=-1
+noise_cal_po_40_5g=-1
+noise_cal_high_gain_5g=73
+noise_cal_nf_substract_val_5g=346
+
+# BT / WIFI coex parameter 
+
+btc_params80=0
+
+btc_params6=10
+
+btc_params95=53
+
+