Moving things around for ICS leak

3 files changed, 31 insertions, 63 deletions

diff --git a/configs/melfas_ts.idc b/configs/melfas_ts.idc
new file mode 100755
index 0000000..703e73b
--- /dev/null
+++ b/configs/melfas_ts.idc
@@ -0,0 +1,24 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# Input Device Configuration File for the Atmel Maxtouch touch screen.
+#
+# These calibration values are derived from empirical measurements
+# and may not be appropriate for use with other touch screens.
+# Refer to the input device configuration documentation for more details.
+#
+
+# Basic Parameters
+touch.deviceType = touchScreen
diff --git a/configs/sec_touchscreen.idc b/configs/sec_touchscreen.idc
index d258f04..4bd511a 100755
--- a/configs/sec_touchscreen.idc
+++ b/configs/sec_touchscreen.idc
@@ -13,11 +13,11 @@
 # limitations under the License.
 
 #
-# Input Device Calibration File for the Crespo touch screen.
+# Input Device Configuration File for the Atmel Maxtouch touch screen.
 #
 # These calibration values are derived from empirical measurements
 # and may not be appropriate for use with other touch screens.
-# Refer to the input device calibration documentation for more details.
+# Refer to the input device configuration documentation for more details.
 #
 
 # Basic Parameters
@@ -31,26 +31,26 @@ touch.touchSize.calibration = pressure
 # Driver reports tool size as an area measurement.
 #
 # Based on empirical measurements, we estimate the size of the tool
-# using size = sqrt(22 * rawToolArea + 0) * 9.2 + 0.
+# using size = sqrt(22 * rawToolArea + 0) * 6 + 0.
 touch.toolSize.calibration = area
 touch.toolSize.areaScale = 22
 touch.toolSize.areaBias = 0
-touch.toolSize.linearScale = 9.2
+touch.toolSize.linearScale = 6
 touch.toolSize.linearBias = 0
 touch.toolSize.isSummed = 0
 
 # Pressure
 # Driver reports signal strength as pressure.
 #
-# A normal thumb touch typically registers about 100 signal strength
+# A normal index finger touch typically registers about 80 signal strength
 # units although we don't expect these values to be accurate.
 touch.pressure.calibration = amplitude
 touch.pressure.source = default
-touch.pressure.scale = 0.01
+touch.pressure.scale = 0.0125
 
 # Size
 touch.size.calibration = normalized
 
 # Orientation
-touch.orientation.calibration = none
+touch.orientation.calibration = vector
 
diff --git a/configs/sec_ts_ics_bio.idc b/configs/sec_ts_ics_bio.idc
deleted file mode 100755
index eb46d0a..0000000
--- a/configs/sec_ts_ics_bio.idc
+++ /dev/null
@@ -1,56 +0,0 @@
-# Copyright (C) 2010 The Android Open Source Project

-#

-# Licensed under the Apache License, Version 2.0 (the "License");

-# you may not use this file except in compliance with the License.

-# You may obtain a copy of the License at

-#

-#      http://www.apache.org/licenses/LICENSE-2.0

-#

-# Unless required by applicable law or agreed to in writing, software

-# distributed under the License is distributed on an "AS IS" BASIS,

-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-# See the License for the specific language governing permissions and

-# limitations under the License.

-

-#

-# Input Device Calibration File for the Crespo touch screen.

-#

-# These calibration values are derived from empirical measurements

-# and may not be appropriate for use with other touch screens.

-# Refer to the input device calibration documentation for more details.

-#

-

-# Basic Parameters

-touch.deviceType = touchScreen

-touch.orientationAware = 1

-

-# Touch Size

-touch.touchSize.calibration = pressure

-

-# Tool Size

-# Driver reports tool size as an area measurement.

-#

-# Based on empirical measurements, we estimate the size of the tool

-# using size = sqrt(22 * rawToolArea + 0) * 9.2 + 0.

-touch.toolSize.calibration = area

-touch.toolSize.areaScale = 22

-touch.toolSize.areaBias = 0

-touch.toolSize.linearScale = 9.2

-touch.toolSize.linearBias = 0

-touch.toolSize.isSummed = 0

-

-# Pressure

-# Driver reports signal strength as pressure.

-#

-# A normal thumb touch typically registers about 100 signal strength

-# units although we don't expect these values to be accurate.

-touch.pressure.calibration = amplitude

-touch.pressure.source = default

-touch.pressure.scale = 0.01

-

-# Size

-touch.size.calibration = normalized

-

-# Orientation

-touch.orientation.calibration = none

-