diff options
Diffstat (limited to 'sensors/akmdfs')
28 files changed, 3563 insertions, 0 deletions
diff --git a/sensors/akmdfs/AK8975Driver.c b/sensors/akmdfs/AK8975Driver.c new file mode 100644 index 0000000..003c8d2 --- /dev/null +++ b/sensors/akmdfs/AK8975Driver.c @@ -0,0 +1,318 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include <fcntl.h> +#include "AKFS_Common.h" +#include "AK8975Driver.h" + +#define MSENSOR_NAME "/dev/akm8975_dev" + +static int s_fdDev = -1; + +/*! + Open device driver. + This function opens both device drivers of magnetic sensor and acceleration + sensor. Additionally, some initial hardware settings are done, such as + measurement range, built-in filter function and etc. + @return If this function succeeds, the return value is #AKD_SUCCESS. + Otherwise the return value is #AKD_FAIL. + */ +int16_t AKD_InitDevice(void) +{ + if (s_fdDev < 0) { + /* Open magnetic sensor's device driver. */ + if ((s_fdDev = open(MSENSOR_NAME, O_RDWR)) < 0) { + AKMERROR_STR("open"); + return AKD_FAIL; + } + } + + return AKD_SUCCESS; +} + +/*! + Close device driver. + This function closes both device drivers of magnetic sensor and acceleration + sensor. + */ +void AKD_DeinitDevice(void) +{ + if (s_fdDev >= 0) { + close(s_fdDev); + s_fdDev = -1; + } +} + +/*! + Writes data to a register of the AK8975. When more than one byte of data is + specified, the data is written in contiguous locations starting at an address + specified in \a address. + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + @param[in] address Specify the address of a register in which data is to be + written. + @param[in] data Specify data to write or a pointer to a data array containing + the data. When specifying more than one byte of data, specify the starting + address of the array. + @param[in] numberOfBytesToWrite Specify the number of bytes that make up the + data to write. When a pointer to an array is specified in data, this argument + equals the number of elements of the array. + */ +int16_t AKD_TxData( + const BYTE address, + const BYTE * data, + const uint16_t numberOfBytesToWrite) +{ + int i; + char buf[RWBUF_SIZE]; + + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + if (numberOfBytesToWrite > (RWBUF_SIZE-2)) { + ALOGE("%s: Tx size is too large.", __FUNCTION__); + return AKD_FAIL; + } + + buf[0] = numberOfBytesToWrite + 1; + buf[1] = address; + + for (i = 0; i < numberOfBytesToWrite; i++) { + buf[i + 2] = data[i]; + } + if (ioctl(s_fdDev, ECS_IOCTL_WRITE, buf) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } else { + +#if ENABLE_AKMDEBUG + AKMDATA(AKMDATA_DRV, "addr(HEX)=%02x data(HEX)=", address); + for (i = 0; i < numberOfBytesToWrite; i++) { + AKMDATA(AKMDATA_DRV, " %02x", data[i]); + } + AKMDATA(AKMDATA_DRV, "\n"); +#endif + return AKD_SUCCESS; + } +} + +/*! + Acquires data from a register or the EEPROM of the AK8975. + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + @param[in] address Specify the address of a register from which data is to be + read. + @param[out] data Specify a pointer to a data array which the read data are + stored. + @param[in] numberOfBytesToRead Specify the number of bytes that make up the + data to read. When a pointer to an array is specified in data, this argument + equals the number of elements of the array. + */ +int16_t AKD_RxData( + const BYTE address, + BYTE * data, + const uint16_t numberOfBytesToRead) +{ + int i; + char buf[RWBUF_SIZE]; + + memset(data, 0, numberOfBytesToRead); + + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + if (numberOfBytesToRead > (RWBUF_SIZE-1)) { + ALOGE("%s: Rx size is too large.", __FUNCTION__); + return AKD_FAIL; + } + + buf[0] = numberOfBytesToRead; + buf[1] = address; + + if (ioctl(s_fdDev, ECS_IOCTL_READ, buf) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } else { + for (i = 0; i < numberOfBytesToRead; i++) { + data[i] = buf[i + 1]; + } +#if ENABLE_AKMDEBUG + AKMDATA(AKMDATA_DRV, "addr(HEX)=%02x len=%d data(HEX)=", + address, numberOfBytesToRead); + for (i = 0; i < numberOfBytesToRead; i++) { + AKMDATA(AKMDATA_DRV, " %02x", data[i]); + } + AKMDATA(AKMDATA_DRV, "\n"); +#endif + return AKD_SUCCESS; + } +} + +/*! + Acquire magnetic data from AK8975. If measurement is not done, this function + waits until measurement completion. + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + @param[out] data A magnetic data array. The size should be larger than #SENSOR_DATA_SIZE. + */ +int16_t AKD_GetMagneticData(BYTE data[SENSOR_DATA_SIZE]) +{ + memset(data, 0, SENSOR_DATA_SIZE); + + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + + if (ioctl(s_fdDev, ECS_IOCTL_GETDATA, data) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + + AKMDATA(AKMDATA_DRV, + "bdata(HEX)= %02x %02x %02x %02x %02x %02x %02x %02x\n", + data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7]); + + return AKD_SUCCESS; +} + +/*! + Set calculated data to device driver. + @param[in] buf The order of input data depends on driver's specification. + */ +void AKD_SetYPR(const int buf[YPR_DATA_SIZE]) +{ + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + } else { + if (ioctl(s_fdDev, ECS_IOCTL_SET_YPR, buf) < 0) { + AKMERROR_STR("ioctl"); + } + } +} + +/*! + */ +int AKD_GetOpenStatus(int* status) +{ + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + if (ioctl(s_fdDev, ECS_IOCTL_GET_OPEN_STATUS, status) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + return AKD_SUCCESS; +} + +/*! + */ +int AKD_GetCloseStatus(int* status) +{ + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + if (ioctl(s_fdDev, ECS_IOCTL_GET_CLOSE_STATUS, status) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + return AKD_SUCCESS; +} + +/*! + Set AK8975 to the specific mode. + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + @param[in] mode This value should be one of the AK8975_Mode which is defined in + akm8975.h file. + */ +int16_t AKD_SetMode(const BYTE mode) +{ + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + + if (ioctl(s_fdDev, ECS_IOCTL_SET_MODE, &mode) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + + return AKD_SUCCESS; +} + +/*! + Acquire delay + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + @param[out] delay A delay in nanosecond. + */ +int16_t AKD_GetDelay(int64_t delay[AKM_NUM_SENSORS]) +{ + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.\n", __FUNCTION__); + return AKD_FAIL; + } + if (ioctl(s_fdDev, ECS_IOCTL_GET_DELAY, delay) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + return AKD_SUCCESS; +} + +/*! + Get layout information from device driver, i.e. platform data. + */ +int16_t AKD_GetLayout(int16_t* layout) +{ + char tmp; + + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + + if (ioctl(s_fdDev, ECS_IOCTL_GET_LAYOUT, &tmp) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + + *layout = tmp; + return AKD_SUCCESS; +} + +/* Get acceleration data. */ +int16_t AKD_GetAccelerationData(int16_t data[3]) +{ + if (s_fdDev < 0) { + ALOGE("%s: Device file is not opened.", __FUNCTION__); + return AKD_FAIL; + } + if (ioctl(s_fdDev, ECS_IOCTL_GET_ACCEL, data) < 0) { + AKMERROR_STR("ioctl"); + return AKD_FAIL; + } + + AKMDATA(AKMDATA_DRV, "%s: acc=%d, %d, %d\n", + __FUNCTION__, data[0], data[1], data[2]); + + return AKD_SUCCESS; +} diff --git a/sensors/akmdfs/AK8975Driver.h b/sensors/akmdfs/AK8975Driver.h new file mode 100644 index 0000000..731210d --- /dev/null +++ b/sensors/akmdfs/AK8975Driver.h @@ -0,0 +1,102 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKMD_INC_AK8975DRIVER_H +#define AKMD_INC_AK8975DRIVER_H + +#include <linux/akm8975.h> /* Device driver */ +#include <stdint.h> /* int8_t, int16_t etc. */ + +/*** Constant definition ******************************************************/ +#define AKD_TRUE 1 /*!< Represents true */ +#define AKD_FALSE 0 /*!< Represents false */ +#define AKD_SUCCESS 1 /*!< Represents success.*/ +#define AKD_FAIL 0 /*!< Represents fail. */ +#define AKD_ERROR -1 /*!< Represents error. */ + +/*! 0:Don't Output data, 1:Output data */ +#define AKD_DBG_DATA 0 +/*! Typical interval in ns */ +#define AK8975_MEASUREMENT_TIME_NS ((AK8975_MEASUREMENT_TIME_US) * 1000) +/*! 720 LSG = 1G = 9.8 m/s2 */ +#define LSG 720 + + +/*** Type declaration *********************************************************/ +typedef unsigned char BYTE; + +/*! + Open device driver. + This function opens device driver of acceleration sensor. + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + */ +typedef int16_t(*ACCFNC_INITDEVICE)(void); + +/*! + Close device driver. + This function closes device drivers of acceleration sensor. + */ +typedef void(*ACCFNC_DEINITDEVICE)(void); + +/*! + Acquire acceleration data from acceleration sensor and convert it to Android + coordinate system. + @return If this function succeeds, the return value is #AKD_SUCCESS. Otherwise + the return value is #AKD_FAIL. + @param[out] data A acceleration data array. The coordinate system of the + acquired data follows the definition of Android. Unit is SmartCompass. + */ +typedef int16_t(*ACCFNC_GETACCDATA)(short data[3]); + + +/*** Global variables *********************************************************/ + +/*** Prototype of Function ***************************************************/ + +int16_t AKD_InitDevice(void); + +void AKD_DeinitDevice(void); + +int16_t AKD_TxData( + const BYTE address, + const BYTE* data, + const uint16_t numberOfBytesToWrite); + +int16_t AKD_RxData( + const BYTE address, + BYTE* data, + const uint16_t numberOfBytesToRead); + +int16_t AKD_GetMagneticData(BYTE data[SENSOR_DATA_SIZE]); + +void AKD_SetYPR(const int buf[YPR_DATA_SIZE]); + +int AKD_GetOpenStatus(int* status); + +int AKD_GetCloseStatus(int* status); + +int16_t AKD_SetMode(const BYTE mode); + +int16_t AKD_GetDelay(int64_t delay[AKM_NUM_SENSORS]); + +int16_t AKD_GetLayout(int16_t* layout); + +int16_t AKD_GetAccelerationData(int16_t data[3]); + +#endif /* AKMD_INC_AK8975DRIVER_H */ + diff --git a/sensors/akmdfs/AKFS_APIs.c b/sensors/akmdfs/AKFS_APIs.c new file mode 100644 index 0000000..ace9bc1 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs.c @@ -0,0 +1,389 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_Common.h" +#include "AKFS_Disp.h" +#include "AKFS_FileIO.h" +#include "AKFS_APIs.h" + +#ifdef WIN32 +#include "AK8975_LinuxDriver.h" +#endif + +static AK8975PRMS g_prms; + +/*! + Initialize library. At first, 0 is set to all parameters. After that, some + parameters, which should not be 0, are set to specific value. Some of initial + values can be customized by editing the file \c "AKFS_CSpec.h". + @return The return value is #AKM_SUCCESS. + @param[in] hpat Specify a layout pattern number. The number is determined + according to the mount orientation of the magnetometer. + @param[in] regs[3] Specify the ASA values which are read out from + fuse ROM. regs[0] is ASAX, regs[1] is ASAY, regs[2] is ASAZ. + */ +int16 AKFS_Init( + const AKFS_PATNO hpat, + const uint8 regs[] +) +{ + AKMDATA(AKMDATA_DUMP, "%s: hpat=%d, r[0]=0x%02X, r[1]=0x%02X, r[2]=0x%02X\n", + __FUNCTION__, hpat, regs[0], regs[1], regs[2]); + + /* Set 0 to the AK8975 structure. */ + memset(&g_prms, 0, sizeof(AK8975PRMS)); + + /* Sensitivity */ + g_prms.mfv_hs.u.x = AK8975_HSENSE_DEFAULT; + g_prms.mfv_hs.u.y = AK8975_HSENSE_DEFAULT; + g_prms.mfv_hs.u.z = AK8975_HSENSE_DEFAULT; + g_prms.mfv_as.u.x = AK8975_ASENSE_DEFAULT; + g_prms.mfv_as.u.y = AK8975_ASENSE_DEFAULT; + g_prms.mfv_as.u.z = AK8975_ASENSE_DEFAULT; + + /* Initialize variables that initial value is not 0. */ + g_prms.mi_hnaveV = CSPEC_HNAVE_V; + g_prms.mi_hnaveD = CSPEC_HNAVE_D; + g_prms.mi_anaveV = CSPEC_ANAVE_V; + g_prms.mi_anaveD = CSPEC_ANAVE_D; + + /* Copy ASA values */ + g_prms.mi_asa.u.x = regs[0]; + g_prms.mi_asa.u.y = regs[1]; + g_prms.mi_asa.u.z = regs[2]; + + /* Copy layout pattern */ + g_prms.m_hpat = hpat; + + return AKM_SUCCESS; +} + +/*! + Release resources. This function is for future expansion. + @return The return value is #AKM_SUCCESS. + */ +int16 AKFS_Release(void) +{ + return AKM_SUCCESS; +} + +/* + This function is called just before a measurement sequence starts. + This function reads parameters from file, then initializes algorithm + parameters. + @return The return value is #AKM_SUCCESS. + @param[in] path Specify a path to the settings file. + */ +int16 AKFS_Start( + const char* path +) +{ + AKMDATA(AKMDATA_DUMP, "%s: path=%s\n", __FUNCTION__, path); + + /* Read setting files from a file */ + if (AKFS_LoadParameters(&g_prms, path) != AKM_SUCCESS) { + AKMERROR_STR("AKFS_Load"); + } + + /* Initialize buffer */ + AKFS_InitBuffer(AKFS_HDATA_SIZE, g_prms.mfv_hdata); + AKFS_InitBuffer(AKFS_HDATA_SIZE, g_prms.mfv_hvbuf); + AKFS_InitBuffer(AKFS_ADATA_SIZE, g_prms.mfv_adata); + AKFS_InitBuffer(AKFS_ADATA_SIZE, g_prms.mfv_avbuf); + + /* Initialize for AOC */ + AKFS_InitAOC(&g_prms.m_aocv); + /* Initialize magnetic status */ + g_prms.mi_hstatus = 0; + + return AKM_SUCCESS; +} + +/*! + This function is called when a measurement sequence is done. + This fucntion writes parameters to file. + @return The return value is #AKM_SUCCESS. + @param[in] path Specify a path to the settings file. + */ +int16 AKFS_Stop( + const char* path +) +{ + AKMDATA(AKMDATA_DUMP, "%s: path=%s\n", __FUNCTION__, path); + + /* Write setting files to a file */ + if (AKFS_SaveParameters(&g_prms, path) != AKM_SUCCESS) { + AKMERROR_STR("AKFS_Save"); + } + + return AKM_SUCCESS; +} + +/*! + This function is called when new magnetometer data is available. The output + vector format and coordination system follow the Android definition. + @return The return value is #AKM_SUCCESS. + Otherwise the return value is #AKM_FAIL. + @param[in] mag A set of measurement data from magnetometer. X axis value + should be in mag[0], Y axis value should be in mag[1], Z axis value should be + in mag[2]. + @param[in] status A status of magnetometer. This status indicates the result + of measurement data, i.e. overflow, success or fail, etc. + @param[out] vx X axis value of magnetic field vector. + @param[out] vy Y axis value of magnetic field vector. + @param[out] vz Z axis value of magnetic field vector. + @param[out] accuracy Accuracy of magnetic field vector. + */ +int16 AKFS_Get_MAGNETIC_FIELD( + const int16 mag[3], + const int16 status, + AKFLOAT* vx, + AKFLOAT* vy, + AKFLOAT* vz, + int16* accuracy +) +{ + int16 akret; + int16 aocret; + AKFLOAT radius; + + AKMDATA(AKMDATA_DUMP, "%s: m[0]=%d, m[1]=%d, m[2]=%d, st=%d\n", + __FUNCTION__, mag[0], mag[1], mag[2], status); + + /* Decomposition */ + /* Sensitivity adjustment, i.e. multiply ASA, is done in this function. */ + akret = AKFS_DecompAK8975( + mag, + status, + &g_prms.mi_asa, + AKFS_HDATA_SIZE, + g_prms.mfv_hdata + ); + if(akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + + /* Adjust coordination */ + akret = AKFS_Rotate( + g_prms.m_hpat, + &g_prms.mfv_hdata[0] + ); + if (akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + + /* AOC for magnetometer */ + /* Offset estimation is done in this function */ + aocret = AKFS_AOC( + &g_prms.m_aocv, + g_prms.mfv_hdata, + &g_prms.mfv_ho + ); + + /* Subtract offset */ + /* Then, a magnetic vector, the unit is uT, is stored in mfv_hvbuf. */ + akret = AKFS_VbNorm( + AKFS_HDATA_SIZE, + g_prms.mfv_hdata, + 1, + &g_prms.mfv_ho, + &g_prms.mfv_hs, + AK8975_HSENSE_TARGET, + AKFS_HDATA_SIZE, + g_prms.mfv_hvbuf + ); + if(akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + + /* Averaging */ + akret = AKFS_VbAve( + AKFS_HDATA_SIZE, + g_prms.mfv_hvbuf, + CSPEC_HNAVE_V, + &g_prms.mfv_hvec + ); + if (akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + + /* Check the size of magnetic vector */ + radius = AKFS_SQRT( + (g_prms.mfv_hvec.u.x * g_prms.mfv_hvec.u.x) + + (g_prms.mfv_hvec.u.y * g_prms.mfv_hvec.u.y) + + (g_prms.mfv_hvec.u.z * g_prms.mfv_hvec.u.z)); + + if (radius > AKFS_GEOMAG_MAX) { + g_prms.mi_hstatus = 0; + } else { + if (aocret) { + g_prms.mi_hstatus = 3; + } + } + + *vx = g_prms.mfv_hvec.u.x; + *vy = g_prms.mfv_hvec.u.y; + *vz = g_prms.mfv_hvec.u.z; + *accuracy = g_prms.mi_hstatus; + + /* Debug output */ + AKMDATA(AKMDATA_MAG, "Mag(%d):%8.2f, %8.2f, %8.2f\n", + *accuracy, *vx, *vy, *vz); + + return AKM_SUCCESS; +} + +/*! + This function is called when new accelerometer data is available. The output + vector format and coordination system follow the Android definition. + @return The return value is #AKM_SUCCESS when function succeeds. Otherwise + the return value is #AKM_FAIL. + @param[in] acc A set of measurement data from accelerometer. X axis value + should be in acc[0], Y axis value should be in acc[1], Z axis value should be + in acc[2]. + @param[in] status A status of accelerometer. This status indicates the result + of acceleration data, i.e. overflow, success or fail, etc. + @param[out] vx X axis value of acceleration vector. + @param[out] vy Y axis value of acceleration vector. + @param[out] vz Z axis value of acceleration vector. + @param[out] accuracy Accuracy of acceleration vector. + This value is always 3. + */ +int16 AKFS_Get_ACCELEROMETER( + const int16 acc[3], + const int16 status, + AKFLOAT* vx, + AKFLOAT* vy, + AKFLOAT* vz, + int16* accuracy +) +{ + int16 akret; + + AKMDATA(AKMDATA_DUMP, "%s: a[0]=%d, a[1]=%d, a[2]=%d, st=%d\n", + __FUNCTION__, acc[0], acc[1], acc[2], status); + + /* Save data to buffer */ + AKFS_BufShift( + AKFS_ADATA_SIZE, + 1, + g_prms.mfv_adata + ); + g_prms.mfv_adata[0].u.x = acc[0]; + g_prms.mfv_adata[0].u.y = acc[1]; + g_prms.mfv_adata[0].u.z = acc[2]; + + /* Subtract offset, adjust sensitivity */ + /* As a result, a unit of acceleration data in mfv_avbuf is '1G = 9.8' */ + akret = AKFS_VbNorm( + AKFS_ADATA_SIZE, + g_prms.mfv_adata, + 1, + &g_prms.mfv_ao, + &g_prms.mfv_as, + AK8975_ASENSE_TARGET, + AKFS_ADATA_SIZE, + g_prms.mfv_avbuf + ); + if(akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + + /* Averaging */ + akret = AKFS_VbAve( + AKFS_ADATA_SIZE, + g_prms.mfv_avbuf, + CSPEC_ANAVE_V, + &g_prms.mfv_avec + ); + if (akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + + /* Adjust coordination */ + /* It is not needed. Because, the data from AK8975 driver is already + follows Android coordinate system. */ + + *vx = g_prms.mfv_avec.u.x; + *vy = g_prms.mfv_avec.u.y; + *vz = g_prms.mfv_avec.u.z; + *accuracy = 3; + + /* Debug output */ + AKMDATA(AKMDATA_ACC, "Acc(%d):%8.2f, %8.2f, %8.2f\n", + *accuracy, *vx, *vy, *vz); + + return AKM_SUCCESS; +} + +/*! + Get orientation sensor's elements. The vector format and coordination system + follow the Android definition. Before this function is called, magnetic + field vector and acceleration vector should be stored in the buffer by + calling #AKFS_Get_MAGNETIC_FIELD and #AKFS_Get_ACCELEROMETER. + @return The return value is #AKM_SUCCESS when function succeeds. Otherwise + the return value is #AKM_FAIL. + @param[out] azimuth Azimuthal angle in degree. + @param[out] pitch Pitch angle in degree. + @param[out] roll Roll angle in degree. + @param[out] accuracy Accuracy of orientation sensor. + */ +int16 AKFS_Get_ORIENTATION( + AKFLOAT* azimuth, + AKFLOAT* pitch, + AKFLOAT* roll, + int16* accuracy +) +{ + int16 akret; + + /* Azimuth calculation */ + /* Coordination system follows the Android coordination. */ + akret = AKFS_Direction( + AKFS_HDATA_SIZE, + g_prms.mfv_hvbuf, + CSPEC_HNAVE_D, + AKFS_ADATA_SIZE, + g_prms.mfv_avbuf, + CSPEC_ANAVE_D, + &g_prms.mf_azimuth, + &g_prms.mf_pitch, + &g_prms.mf_roll + ); + + if(akret == AKFS_ERROR) { + AKMERROR; + return AKM_FAIL; + } + *azimuth = g_prms.mf_azimuth; + *pitch = g_prms.mf_pitch; + *roll = g_prms.mf_roll; + *accuracy = g_prms.mi_hstatus; + + /* Debug output */ + AKMDATA(AKMDATA_ORI, "Ori(%d):%8.2f, %8.2f, %8.2f\n", + *accuracy, *azimuth, *pitch, *roll); + + return AKM_SUCCESS; +} + diff --git a/sensors/akmdfs/AKFS_APIs.h b/sensors/akmdfs/AKFS_APIs.h new file mode 100644 index 0000000..e4d1e48 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs.h @@ -0,0 +1,69 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_APIS_H +#define AKFS_INC_APIS_H + +/* Include files for AK8975 library. */ +#include "AKFS_Compass.h" + +/*** Constant definition ******************************************************/ +#define AKFS_GEOMAG_MAX 70 + +/*** Type declaration *********************************************************/ + +/*** Global variables *********************************************************/ + +/*** Prototype of function ****************************************************/ +int16 AKFS_Init( + const AKFS_PATNO hpat, + const uint8 regs[] +); + +int16 AKFS_Release(void); + +int16 AKFS_Start(const char* path); + +int16 AKFS_Stop(const char* path); + +int16 AKFS_Get_MAGNETIC_FIELD( + const int16 mag[3], + const int16 status, + AKFLOAT* vx, + AKFLOAT* vy, + AKFLOAT* vz, + int16* accuracy +); + +int16 AKFS_Get_ACCELEROMETER( + const int16 acc[3], + const int16 status, + AKFLOAT* vx, + AKFLOAT* vy, + AKFLOAT* vz, + int16* accuracy +); + +int16 AKFS_Get_ORIENTATION( + AKFLOAT* azimuth, + AKFLOAT* pitch, + AKFLOAT* roll, + int16* accuracy +); + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_AK8975.c b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AK8975.c new file mode 100644 index 0000000..7bac9a1 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AK8975.c @@ -0,0 +1,44 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_AK8975.h" +#include "AKFS_Device.h" + +/*! + */ +int16 AKFS_DecompAK8975( + const int16 mag[3], + const int16 status, + const uint8vec* asa, + const int16 nhdata, + AKFVEC hdata[] +) +{ + /* put st1 and st2 value */ + if (AK8975_ST_ERROR(status)) { + return AKFS_ERROR; + } + + /* magnetic */ + AKFS_BufShift(nhdata, 1, hdata); + hdata[0].u.x = mag[0] * (((asa->u.x)/256.0f) + 0.5f); + hdata[0].u.y = mag[1] * (((asa->u.y)/256.0f) + 0.5f); + hdata[0].u.z = mag[2] * (((asa->u.z)/256.0f) + 0.5f); + + return AKFS_SUCCESS; +} + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_AK8975.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AK8975.h new file mode 100644 index 0000000..25459e3 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AK8975.h @@ -0,0 +1,50 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_AK8975_H +#define AKFS_INC_AK8975_H + +#include "AKFS_Device.h" + +/***** Constant definition ****************************************************/ +#define AK8975_BDATA_SIZE 8 + +#define AK8975_HSENSE_DEFAULT 1 +#define AK8975_HSENSE_TARGET 0.3f +#define AK8975_ASENSE_DEFAULT 720 +#define AK8975_ASENSE_TARGET 9.80665f + +#define AK8975_HDATA_CONVERTER(hi, low, asa) \ + (AKFLOAT)((int16)((((uint16)(hi))<<8)+(uint16)(low))*(((asa)/256.0f) + 0.5f)) + +#define AK8975_ST_ERROR(st) (((st)&0x09) != 0x01) + +/***** Type declaration *******************************************************/ + +/***** Prototype of function **************************************************/ +AKLIB_C_API_START +int16 AKFS_DecompAK8975( + const int16 mag[3], + const int16 status, + const uint8vec* asa, + const int16 nhdata, + AKFVEC hdata[] +); +AKLIB_C_API_END + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_AOC.c b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AOC.c new file mode 100644 index 0000000..62b2361 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AOC.c @@ -0,0 +1,333 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_AOC.h" +#include "AKFS_Math.h" + +/* + * CalcR + */ +static AKFLOAT CalcR( + const AKFVEC* x, + const AKFVEC* y +){ + int16 i; + AKFLOAT r; + + r = 0.0; + for(i = 0; i < 3; i++){ + r += (x->v[i]-y->v[i]) * (x->v[i]-y->v[i]); + } + r = sqrt(r); + + return r; +} + +/* + * From4Points2Sphere() + */ +static int16 From4Points2Sphere( + const AKFVEC points[], /*! (i/o) : input vectors */ + AKFVEC* center, /*! (o) : center of sphere */ + AKFLOAT* r /*! (i) : add/subtract value */ +){ + AKFLOAT dif[3][3]; + AKFLOAT r2[3]; + + AKFLOAT A; + AKFLOAT B; + AKFLOAT C; + AKFLOAT D; + AKFLOAT E; + AKFLOAT F; + AKFLOAT G; + + AKFLOAT OU; + AKFLOAT OD; + + int16 i, j; + + for(i = 0; i < 3; i++){ + r2[i] = 0.0; + for(j = 0; j < 3; j++){ + dif[i][j] = points[i].v[j] - points[3].v[j]; + r2[i] += (points[i].v[j]*points[i].v[j] + - points[3].v[j]*points[3].v[j]); + } + r2[i] *= 0.5; + } + + A = dif[0][0]*dif[2][2] - dif[0][2]*dif[2][0]; + B = dif[0][1]*dif[2][0] - dif[0][0]*dif[2][1]; + C = dif[0][0]*dif[2][1] - dif[0][1]*dif[2][0]; + D = dif[0][0]*r2[2] - dif[2][0]*r2[0]; + E = dif[0][0]*dif[1][1] - dif[0][1]*dif[1][0]; + F = dif[1][0]*dif[0][2] - dif[0][0]*dif[1][2]; + G = dif[0][0]*r2[1] - dif[1][0]*r2[0]; + + OU = D*E + B*G; + OD = C*F + A*E; + + if(fabs(OD) < AKFS_EPSILON){ + return -1; + } + + center->v[2] = OU / OD; + + OU = F*center->v[2] + G; + OD = E; + + if(fabs(OD) < AKFS_EPSILON){ + return -1; + } + + center->v[1] = OU / OD; + + OU = r2[0] - dif[0][1]*center->v[1] - dif[0][2]*center->v[2]; + OD = dif[0][0]; + + if(fabs(OD) < AKFS_EPSILON){ + return -1; + } + + center->v[0] = OU / OD; + + *r = CalcR(&points[0], center); + + return 0; + +} + +/* + * MeanVar + */ +static void MeanVar( + const AKFVEC v[], /*!< (i) : input vectors */ + const int16 n, /*!< (i) : number of vectors */ + AKFVEC* mean, /*!< (o) : (max+min)/2 */ + AKFVEC* var /*!< (o) : variation in vectors */ +){ + int16 i; + int16 j; + AKFVEC max; + AKFVEC min; + + for(j = 0; j < 3; j++){ + min.v[j] = v[0].v[j]; + max.v[j] = v[0].v[j]; + for(i = 1; i < n; i++){ + if(v[i].v[j] < min.v[j]){ + min.v[j] = v[i].v[j]; + } + if(v[i].v[j] > max.v[j]){ + max.v[j] = v[i].v[j]; + } + } + mean->v[j] = (max.v[j] + min.v[j]) / 2.0; /*mean */ + var->v[j] = max.v[j] - min.v[j]; /*var */ + } +} + +/* + * Get4points + */ +static void Get4points( + const AKFVEC v[], /*!< (i) : input vectors */ + const int16 n, /*!< (i) : number of vectors */ + AKFVEC out[] /*!< (o) : */ +){ + int16 i, j; + AKFLOAT temp; + AKFLOAT d; + + AKFVEC dv[AKFS_HBUF_SIZE]; + AKFVEC cross; + AKFVEC tempv; + + /* out 0 */ + out[0] = v[0]; + + /* out 1 */ + d = 0.0; + for(i = 1; i < n; i++){ + temp = CalcR(&v[i], &out[0]); + if(d < temp){ + d = temp; + out[1] = v[i]; + } + } + + /* out 2 */ + d = 0.0; + for(j = 0; j < 3; j++){ + dv[0].v[j] = out[1].v[j] - out[0].v[j]; + } + for(i = 1; i < n; i++){ + for(j = 0; j < 3; j++){ + dv[i].v[j] = v[i].v[j] - out[0].v[j]; + } + tempv.v[0] = dv[0].v[1]*dv[i].v[2] - dv[0].v[2]*dv[i].v[1]; + tempv.v[1] = dv[0].v[2]*dv[i].v[0] - dv[0].v[0]*dv[i].v[2]; + tempv.v[2] = dv[0].v[0]*dv[i].v[1] - dv[0].v[1]*dv[i].v[0]; + temp = tempv.u.x * tempv.u.x + + tempv.u.y * tempv.u.y + + tempv.u.z * tempv.u.z; + if(d < temp){ + d = temp; + out[2] = v[i]; + cross = tempv; + } + } + + /* out 3 */ + d = 0.0; + for(i = 1; i < n; i++){ + temp = dv[i].u.x * cross.u.x + + dv[i].u.y * cross.u.y + + dv[i].u.z * cross.u.z; + temp = fabs(temp); + if(d < temp){ + d = temp; + out[3] = v[i]; + } + } +} + +/* + * CheckInitFvec + */ +static int16 CheckInitFvec( + const AKFVEC *v /*!< [in] vector */ +){ + int16 i; + + for(i = 0; i < 3; i++){ + if(AKFS_FMAX <= v->v[i]){ + return 1; /* initvalue */ + } + } + + return 0; /* not initvalue */ +} + +/* + * AKFS_AOC + */ +int16 AKFS_AOC( /*!< (o) : calibration success(1), failure(0) */ + AKFS_AOC_VAR* haocv, /*!< (i/o) : a set of variables */ + const AKFVEC* hdata, /*!< (i) : vectors of data */ + AKFVEC* ho /*!< (i/o) : offset */ +){ + int16 i, j; + int16 num; + AKFLOAT tempf; + AKFVEC tempho; + + AKFVEC fourpoints[4]; + + AKFVEC var; + AKFVEC mean; + + /* buffer new data */ + for(i = 1; i < AKFS_HBUF_SIZE; i++){ + haocv->hbuf[AKFS_HBUF_SIZE-i] = haocv->hbuf[AKFS_HBUF_SIZE-i-1]; + } + haocv->hbuf[0] = *hdata; + + /* Check Init */ + num = 0; + for(i = AKFS_HBUF_SIZE; 3 < i; i--){ + if(CheckInitFvec(&haocv->hbuf[i-1]) == 0){ + num = i; + break; + } + } + if(num < 4){ + return AKFS_ERROR; + } + + /* get 4 points */ + Get4points(haocv->hbuf, num, fourpoints); + + /* estimate offset */ + if(0 != From4Points2Sphere(fourpoints, &tempho, &haocv->hraoc)){ + return AKFS_ERROR; + } + + /* check distance */ + for(i = 0; i < 4; i++){ + for(j = (i+1); j < 4; j++){ + tempf = CalcR(&fourpoints[i], &fourpoints[j]); + if((tempf < haocv->hraoc)||(tempf < AKFS_HR_TH)){ + return AKFS_ERROR; + } + } + } + + /* update offset buffer */ + for(i = 1; i < AKFS_HOBUF_SIZE; i++){ + haocv->hobuf[AKFS_HOBUF_SIZE-i] = haocv->hobuf[AKFS_HOBUF_SIZE-i-1]; + } + haocv->hobuf[0] = tempho; + + /* clear hbuf */ + for(i = (AKFS_HBUF_SIZE>>1); i < AKFS_HBUF_SIZE; i++) { + for(j = 0; j < 3; j++) { + haocv->hbuf[i].v[j]= AKFS_FMAX; + } + } + + /* Check Init */ + if(CheckInitFvec(&haocv->hobuf[AKFS_HOBUF_SIZE-1]) == 1){ + return AKFS_ERROR; + } + + /* Check ovar */ + tempf = haocv->hraoc * AKFS_HO_TH; + MeanVar(haocv->hobuf, AKFS_HOBUF_SIZE, &mean, &var); + if ((var.u.x >= tempf) || (var.u.y >= tempf) || (var.u.z >= tempf)){ + return AKFS_ERROR; + } + + *ho = mean; + + return AKFS_SUCCESS; +} + +/* + * AKFS_InitAOC + */ +void AKFS_InitAOC( + AKFS_AOC_VAR* haocv +){ + int16 i, j; + + /* Initialize buffer */ + for(i = 0; i < AKFS_HBUF_SIZE; i++) { + for(j = 0; j < 3; j++) { + haocv->hbuf[i].v[j]= AKFS_FMAX; + } + } + for(i = 0; i < AKFS_HOBUF_SIZE; i++) { + for(j = 0; j < 3; j++) { + haocv->hobuf[i].v[j]= AKFS_FMAX; + } + } + + haocv->hraoc = 0.0; +} + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_AOC.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AOC.h new file mode 100644 index 0000000..ffaaa88 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_AOC.h @@ -0,0 +1,53 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_AOC_H +#define AKFS_INC_AOC_H + +#include "AKFS_Device.h" + +/***** Constant definition ****************************************************/ +#define AKFS_HBUF_SIZE 20 +#define AKFS_HOBUF_SIZE 4 +#define AKFS_HR_TH 10 +#define AKFS_HO_TH 0.15 + +/***** Macro definition *******************************************************/ + +/***** Type declaration *******************************************************/ +typedef struct _AKFS_AOC_VAR{ + AKFVEC hbuf[AKFS_HBUF_SIZE]; + AKFVEC hobuf[AKFS_HOBUF_SIZE]; + AKFLOAT hraoc; +} AKFS_AOC_VAR; + +/***** Prototype of function **************************************************/ +AKLIB_C_API_START +int16 AKFS_AOC( + AKFS_AOC_VAR* haocv, + const AKFVEC* hdata, + AKFVEC* ho +); + +void AKFS_InitAOC( + AKFS_AOC_VAR* haocv +); + +AKLIB_C_API_END + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_Configure.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Configure.h new file mode 100644 index 0000000..1f80f48 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Configure.h @@ -0,0 +1,37 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_CONFIG_H +#define AKFS_INC_CONFIG_H + +/***** Language configuration *************************************************/ +#if defined(__cplusplus) +#define AKLIB_C_API_START extern "C" { +#define AKLIB_C_API_END } +#else +#define AKLIB_C_API_START +#define AKLIB_C_API_END +#endif + +/*! If following line is commented in, double type is used for floating point + calculation */ +/* +#define AKFS_PRECISION_DOUBLE +*/ + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_Device.c b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Device.c new file mode 100644 index 0000000..3d99ab1 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Device.c @@ -0,0 +1,110 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_Device.h" + +int16 AKFS_InitBuffer( + const int16 ndata, /*!< Size of vector buffer */ + AKFVEC vdata[] /*!< Vector buffer */ +) +{ + int i; + + /* size check */ + if (ndata <= 0) { + return AKFS_ERROR; + } + + for (i=0; i<ndata; i++) { + vdata[i].u.x = AKFS_INIT_VALUE_F; + vdata[i].u.y = AKFS_INIT_VALUE_F; + vdata[i].u.z = AKFS_INIT_VALUE_F; + } + + return AKFS_SUCCESS; +} + +int16 AKFS_BufShift( + const int16 len, /*!< size of buffer */ + const int16 shift, /*!< shift size */ + AKFVEC v[] /*!< buffer */ +) +{ + int16 i; + + if((shift < 1) || (len < shift)) { + return AKFS_ERROR; + } + for (i = len-1; i >= shift; i--) { + v[i] = v[i-shift]; + } + return AKFS_SUCCESS; +} + +int16 AKFS_Rotate( + const AKFS_PATNO pat, + AKFVEC* vec +) +{ + AKFLOAT tmp; + switch(pat){ + /* Obverse */ + case PAT1: + /* This is Android default */ + break; + case PAT2: + tmp = vec->u.x; + vec->u.x = vec->u.y; + vec->u.y = -tmp; + break; + case PAT3: + vec->u.x = -(vec->u.x); + vec->u.y = -(vec->u.y); + break; + case PAT4: + tmp = vec->u.x; + vec->u.x = -(vec->u.y); + vec->u.y = tmp; + break; + /* Reverse */ + case PAT5: + vec->u.x = -(vec->u.x); + vec->u.z = -(vec->u.z); + break; + case PAT6: + tmp = vec->u.x; + vec->u.x = vec->u.y; + vec->u.y = tmp; + vec->u.z = -(vec->u.z); + break; + case PAT7: + vec->u.y = -(vec->u.y); + vec->u.z = -(vec->u.z); + break; + case PAT8: + tmp = vec->u.x; + vec->u.x = -(vec->u.y); + vec->u.y = -tmp; + vec->u.z = -(vec->u.z); + break; + default: + return AKFS_ERROR; + } + + return AKFS_SUCCESS; +} + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_Device.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Device.h new file mode 100644 index 0000000..0292d54 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Device.h @@ -0,0 +1,107 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_DEVICE_H +#define AKFS_INC_DEVICE_H + +#include <float.h> +#include "AKFS_Configure.h" + +/***** Constant definition ****************************************************/ +#define AKFS_ERROR 0 +#define AKFS_SUCCESS 1 + +#define AKFS_HDATA_SIZE 32 +#define AKFS_ADATA_SIZE 32 + +/***** Type declaration *******************************************************/ +typedef signed char int8; +typedef signed short int16; +typedef unsigned char uint8; +typedef unsigned short uint16; + + +#ifdef AKFS_PRECISION_DOUBLE +typedef double AKFLOAT; +#define AKFS_EPSILON DBL_EPSILON +#define AKFS_FMAX DBL_MAX +#define AKFS_FMIN DBL_MIN + +#else +typedef float AKFLOAT; +#define AKFS_EPSILON FLT_EPSILON +#define AKFS_FMAX FLT_MAX +#define AKFS_FMIN FLT_MIN + +#endif + +/* Treat maximum value as initial value */ +#define AKFS_INIT_VALUE_F AKFS_FMAX + +/***** Vector *****/ +typedef union _uint8vec{ + struct { + uint8 x; + uint8 y; + uint8 z; + }u; + uint8 v[3]; +} uint8vec; + +typedef union _AKFVEC{ + struct { + AKFLOAT x; + AKFLOAT y; + AKFLOAT z; + }u; + AKFLOAT v[3]; +} AKFVEC; + +/***** Layout pattern *****/ +typedef enum _AKFS_PATNO { + PAT_INVALID = 0, + PAT1, /* obverse: 1st pin is right down */ + PAT2, /* obverse: 1st pin is left down */ + PAT3, /* obverse: 1st pin is left top */ + PAT4, /* obverse: 1st pin is right top */ + PAT5, /* reverse: 1st pin is left down (from top view) */ + PAT6, /* reverse: 1st pin is left top (from top view) */ + PAT7, /* reverse: 1st pin is right top (from top view) */ + PAT8 /* reverse: 1st pin is right down (from top view) */ +} AKFS_PATNO; + +/***** Prototype of function **************************************************/ +AKLIB_C_API_START +int16 AKFS_InitBuffer( + const int16 ndata, /*!< Size of raw vector buffer */ + AKFVEC vdata[] /*!< Raw vector buffer */ +); + +int16 AKFS_BufShift( + const int16 len, + const int16 shift, + AKFVEC v[] +); + +int16 AKFS_Rotate( + const AKFS_PATNO pat, + AKFVEC* vec +); +AKLIB_C_API_END + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_Direction.c b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Direction.c new file mode 100644 index 0000000..f47e930 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Direction.c @@ -0,0 +1,133 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_Direction.h" +#include "AKFS_VNorm.h" +#include "AKFS_Math.h" + +/* + Coordinate system is right-handed. + X-Axis: from left to right. + Y-Axis: from bottom to top. + Z-Axis: from reverse to obverse. + + azimuth: Rotaion around Z axis, with positive values + when y-axis moves toward the x-axis. + pitch: Rotation around X axis, with positive values + when z-axis moves toward the y-axis. + roll: Rotation around Y axis, with positive values + when x-axis moves toward the z-axis. +*/ + +/* + This function is used internaly, so output is RADIAN! + */ +static void AKFS_Angle( + const AKFVEC* avec, + AKFLOAT* pitch, /* radian */ + AKFLOAT* roll /* radian */ +) +{ + AKFLOAT av; /* Size of vector */ + + av = AKFS_SQRT((avec->u.x)*(avec->u.x) + (avec->u.y)*(avec->u.y) + (avec->u.z)*(avec->u.z)); + + *pitch = AKFS_ASIN(-(avec->u.y) / av); + *roll = AKFS_ASIN((avec->u.x) / av); +} + +/* + This function is used internaly, so output is RADIAN! + */ +static void AKFS_Azimuth( + const AKFVEC* hvec, + const AKFLOAT pitch, /* radian */ + const AKFLOAT roll, /* radian */ + AKFLOAT* azimuth /* radian */ +) +{ + AKFLOAT sinP; /* sin value of pitch angle */ + AKFLOAT cosP; /* cos value of pitch angle */ + AKFLOAT sinR; /* sin value of roll angle */ + AKFLOAT cosR; /* cos value of roll angle */ + AKFLOAT Xh; /* X axis element of vector which is projected to horizontal plane */ + AKFLOAT Yh; /* Y axis element of vector which is projected to horizontal plane */ + + sinP = AKFS_SIN(pitch); + cosP = AKFS_COS(pitch); + sinR = AKFS_SIN(roll); + cosR = AKFS_COS(roll); + + Yh = -(hvec->u.x)*cosR + (hvec->u.z)*sinR; + Xh = (hvec->u.x)*sinP*sinR + (hvec->u.y)*cosP + (hvec->u.z)*sinP*cosR; + + /* atan2(y, x) -> divisor and dividend is opposite from mathematical equation. */ + *azimuth = AKFS_ATAN2(Yh, Xh); +} + +int16 AKFS_Direction( + const int16 nhvec, + const AKFVEC hvec[], + const int16 hnave, + const int16 navec, + const AKFVEC avec[], + const int16 anave, + AKFLOAT* azimuth, + AKFLOAT* pitch, + AKFLOAT* roll +) +{ + AKFVEC have, aave; + AKFLOAT azimuthRad; + AKFLOAT pitchRad; + AKFLOAT rollRad; + + /* arguments check */ + if ((nhvec <= 0) || (navec <= 0) || (hnave <= 0) || (anave <= 0)) { + return AKFS_ERROR; + } + if ((nhvec < hnave) || (navec < anave)) { + return AKFS_ERROR; + } + + /* average */ + if (AKFS_VbAve(nhvec, hvec, hnave, &have) != AKFS_SUCCESS) { + return AKFS_ERROR; + } + if (AKFS_VbAve(navec, avec, anave, &aave) != AKFS_SUCCESS) { + return AKFS_ERROR; + } + + /* calculate pitch and roll */ + AKFS_Angle(&aave, &pitchRad, &rollRad); + + /* calculate azimuth */ + AKFS_Azimuth(&have, pitchRad, rollRad, &azimuthRad); + + *azimuth = RAD2DEG(azimuthRad); + *pitch = RAD2DEG(pitchRad); + *roll = RAD2DEG(rollRad); + + /* Adjust range of azimuth */ + if (*azimuth < 0) { + *azimuth += 360.0f; + } + + return AKFS_SUCCESS; +} + + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_Direction.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Direction.h new file mode 100644 index 0000000..c08338d --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Direction.h @@ -0,0 +1,39 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_DIRECTION_H +#define AKFS_INC_DIRECTION_H + +#include "AKFS_Device.h" + +/***** Prototype of function **************************************************/ +AKLIB_C_API_START +int16 AKFS_Direction( + const int16 nhvec, + const AKFVEC hvec[], + const int16 hnave, + const int16 navec, + const AKFVEC avec[], + const int16 anave, + AKFLOAT* azimuth, + AKFLOAT* pitch, + AKFLOAT* roll +); +AKLIB_C_API_END + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_Math.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Math.h new file mode 100644 index 0000000..dfe48b3 --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_Math.h @@ -0,0 +1,47 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_MATH_H +#define AKFS_INC_MATH_H + +#include <math.h> +#include "AKFS_Configure.h" + +/***** Constant definition ****************************************************/ +#define AKFS_PI 3.141592654f +#define RAD2DEG(rad) ((rad)*180.0f/AKFS_PI) + +/***** Macro definition *******************************************************/ + +#ifdef AKFS_PRECISION_DOUBLE +#define AKFS_SIN(x) sin(x) +#define AKFS_COS(x) cos(x) +#define AKFS_ASIN(x) asin(x) +#define AKFS_ACOS(x) acos(x) +#define AKFS_ATAN2(y, x) atan2((y), (x)) +#define AKFS_SQRT(x) sqrt(x) +#else +#define AKFS_SIN(x) sinf(x) +#define AKFS_COS(x) cosf(x) +#define AKFS_ASIN(x) asinf(x) +#define AKFS_ACOS(x) acosf(x) +#define AKFS_ATAN2(y, x) atan2f((y), (x)) +#define AKFS_SQRT(x) sqrtf(x) +#endif + +#endif + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_VNorm.c b/sensors/akmdfs/AKFS_APIs_8975/AKFS_VNorm.c new file mode 100644 index 0000000..ffa934a --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_VNorm.c @@ -0,0 +1,107 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_VNorm.h" +#include "AKFS_Device.h" + +/*! + */ +int16 AKFS_VbNorm( + const int16 ndata, /*!< Size of raw vector buffer */ + const AKFVEC vdata[], /*!< Raw vector buffer */ + const int16 nbuf, /*!< Size of data to be buffered */ + const AKFVEC* o, /*!< Offset */ + const AKFVEC* s, /*!< Sensitivity */ + const AKFLOAT tgt, /*!< Target sensitivity */ + const int16 nvec, /*!< Size of normalized vector buffer */ + AKFVEC vvec[] /*!< Normalized vector buffer */ +) +{ + int i; + + /* size check */ + if ((ndata <= 0) || (nvec <= 0) || (nbuf <= 0)) { + return AKFS_ERROR; + } + /* dependency check */ + if ((nbuf < 1) || (ndata < nbuf) || (nvec < nbuf)) { + return AKFS_ERROR; + } + /* sensitivity check */ + if ((s->u.x <= AKFS_EPSILON) || + (s->u.y <= AKFS_EPSILON) || + (s->u.z <= AKFS_EPSILON) || + (tgt <= 0)) { + return AKFS_ERROR; + } + + /* calculate and store data to buffer */ + if (AKFS_BufShift(nvec, nbuf, vvec) != AKFS_SUCCESS) { + return AKFS_ERROR; + } + for (i=0; i<nbuf; i++) { + vvec[i].u.x = ((vdata[i].u.x - o->u.x) / (s->u.x) * (AKFLOAT)tgt); + vvec[i].u.y = ((vdata[i].u.y - o->u.y) / (s->u.y) * (AKFLOAT)tgt); + vvec[i].u.z = ((vdata[i].u.z - o->u.z) / (s->u.z) * (AKFLOAT)tgt); + } + + return AKFS_SUCCESS; +} + +/*! + */ +int16 AKFS_VbAve( + const int16 nvec, /*!< Size of normalized vector buffer */ + const AKFVEC vvec[], /*!< Normalized vector buffer */ + const int16 nave, /*!< Number of averaeg */ + AKFVEC* vave /*!< Averaged vector */ +) +{ + int i; + + /* arguments check */ + if ((nave <= 0) || (nvec <= 0) || (nvec < nave)) { + return AKFS_ERROR; + } + + /* calculate average */ + vave->u.x = 0; + vave->u.y = 0; + vave->u.z = 0; + for (i=0; i<nave; i++) { + if ((vvec[i].u.x == AKFS_INIT_VALUE_F) || + (vvec[i].u.y == AKFS_INIT_VALUE_F) || + (vvec[i].u.z == AKFS_INIT_VALUE_F)) { + break; + } + vave->u.x += vvec[i].u.x; + vave->u.y += vvec[i].u.y; + vave->u.z += vvec[i].u.z; + } + if (i == 0) { + vave->u.x = 0; + vave->u.y = 0; + vave->u.z = 0; + } else { + vave->u.x /= i; + vave->u.y /= i; + vave->u.z /= i; + } + return AKFS_SUCCESS; +} + + diff --git a/sensors/akmdfs/AKFS_APIs_8975/AKFS_VNorm.h b/sensors/akmdfs/AKFS_APIs_8975/AKFS_VNorm.h new file mode 100644 index 0000000..c3c9bed --- /dev/null +++ b/sensors/akmdfs/AKFS_APIs_8975/AKFS_VNorm.h @@ -0,0 +1,46 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_VNORM_H +#define AKFS_INC_VNORM_H + +#include "AKFS_Device.h" + +/***** Prototype of function **************************************************/ +AKLIB_C_API_START +int16 AKFS_VbNorm( + const int16 ndata, /*!< Size of raw vector buffer */ + const AKFVEC vdata[], /*!< Raw vector buffer */ + const int16 nbuf, /*!< Size of data to be buffered */ + const AKFVEC* o, /*!< Offset */ + const AKFVEC* s, /*!< Sensitivity */ + const AKFLOAT tgt, /*!< Target sensitivity */ + const int16 nvec, /*!< Size of normalized vector buffer */ + AKFVEC vvec[] /*!< Normalized vector buffer */ +); + +int16 AKFS_VbAve( + const int16 nvec, /*!< Size of normalized vector buffer */ + const AKFVEC vvec[], /*!< Normalized vector buffer */ + const int16 nave, /*!< Number of averaeg */ + AKFVEC* vave /*!< Averaged vector */ +); + +AKLIB_C_API_END + +#endif + diff --git a/sensors/akmdfs/AKFS_CSpec.h b/sensors/akmdfs/AKFS_CSpec.h new file mode 100644 index 0000000..380f06f --- /dev/null +++ b/sensors/akmdfs/AKFS_CSpec.h @@ -0,0 +1,38 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_CSPEC_H +#define AKFS_INC_CSPEC_H + +/******************************************************************************* + User defines parameters. + ******************************************************************************/ +/* Parameters for Average */ +/* The number of magnetic/acceleration data to be averaged. */ +#define CSPEC_HNAVE_D 4 +#define CSPEC_ANAVE_D 4 +#define CSPEC_HNAVE_V 8 +#define CSPEC_ANAVE_V 8 + +#ifdef WIN32 +#define CSPEC_SETTING_FILE "akmdfs.txt" +#else +#define CSPEC_SETTING_FILE "/data/misc/akmdfs.txt" +#endif + +#endif + diff --git a/sensors/akmdfs/AKFS_Common.h b/sensors/akmdfs/AKFS_Common.h new file mode 100644 index 0000000..7780801 --- /dev/null +++ b/sensors/akmdfs/AKFS_Common.h @@ -0,0 +1,141 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_COMMON_H +#define AKFS_INC_COMMON_H + +#ifdef WIN32 +#ifndef _WIN32_WINNT +#define _WIN32_WINNT 0x0501 +#endif + +#include <windows.h> +#include <stdio.h> +#include <stdlib.h> +#include <conio.h> +#include <stdarg.h> +#include <crtdbg.h> +#include "Android.h" + +#define DBG_LEVEL DBG_LEVEL4 +#define ENABLE_AKMDEBUG 1 + +#else +#include <stdio.h> /* frpintf */ +#include <stdlib.h> /* atoi */ +#include <string.h> /* memset */ +#include <unistd.h> +#include <stdarg.h> /* va_list */ +#include <utils/Log.h> /* ALOGV */ +#include <errno.h> /* errno */ + +#endif + +/*** Constant definition ******************************************************/ +#define AKM_TRUE 1 /*!< Represents true */ +#define AKM_FALSE 0 /*!< Represents false */ +#define AKM_SUCCESS 1 /*!< Represents success */ +#define AKM_FAIL 0 /*!< Represents fail */ + +#define DBG_LEVEL0 0 /* Critical */ +#define DBG_LEVEL1 1 /* Notice */ +#define DBG_LEVEL2 2 /* Information */ +#define DBG_LEVEL3 3 /* Debug */ +#define DBG_LEVEL4 4 /* Verbose */ + +#ifndef DBG_LEVEL +#define DBG_LEVEL DBG_LEVEL0 +#endif + +#define DATA_AREA01 0x0001 +#define DATA_AREA02 0x0002 +#define DATA_AREA03 0x0004 +#define DATA_AREA04 0x0008 +#define DATA_AREA05 0x0010 +#define DATA_AREA06 0x0020 +#define DATA_AREA07 0x0040 +#define DATA_AREA08 0x0080 +#define DATA_AREA09 0x0100 +#define DATA_AREA10 0x0200 +#define DATA_AREA11 0x0400 +#define DATA_AREA12 0x0800 +#define DATA_AREA13 0x1000 +#define DATA_AREA14 0x2000 +#define DATA_AREA15 0x4000 +#define DATA_AREA16 0x8000 + + +/* Debug area definition */ +#define AKMDATA_DUMP DATA_AREA01 /*<! Dump data */ +#define AKMDATA_BDATA DATA_AREA02 /*<! BDATA */ +#define AKMDATA_MAG DATA_AREA03 /*<! Magnetic Field */ +#define AKMDATA_ACC DATA_AREA04 /*<! Accelerometer */ +#define AKMDATA_ORI DATA_AREA05 /*<! Orientation */ +#define AKMDATA_GETINTERVAL DATA_AREA06 +#define AKMDATA_LOOP DATA_AREA07 +#define AKMDATA_DRV DATA_AREA08 + +#ifndef ENABLE_AKMDEBUG +#define ENABLE_AKMDEBUG 0 /* Eanble debug output when it is 1. */ +#endif + +#define OPMODE_CONSOLE 0x01 +#define OPMODE_FST 0x02 + +/***** Debug Level Output *************************************/ +#if ENABLE_AKMDEBUG +#define AKMDEBUG(level, format, ...) \ + (((level) <= DBG_LEVEL) \ + ? (fprintf(stdout, (format), ##__VA_ARGS__)) \ + : ((void)0)) +#else +#define AKMDEBUG(level, format, ...) +#endif + +/***** Dbg Zone Output ***************************************/ +#if ENABLE_AKMDEBUG +#define AKMDATA(flag, format, ...) \ + ((((int)flag) & g_dbgzone) \ + ? (fprintf(stdout, (format), ##__VA_ARGS__)) \ + : ((void)0)) +#else +#define AKMDATA(flag, format, ...) +#endif + +/***** Log output ********************************************/ +#ifdef AKM_LOG_ENABLE +#define AKM_LOG(format, ...) ALOGD((format), ##__VA_ARGS__) +#else +#define AKM_LOG(format, ...) +#endif + +/***** Error output *******************************************/ +#define AKMERROR \ + ALOGE("%s:%d Error.", __FUNCTION__, __LINE__) + +#define AKMERROR_STR(api) \ + ALOGE("%s:%d %s Error (%s).", \ + __FUNCTION__, __LINE__, (api), strerror(errno)) + +/*** Type declaration *********************************************************/ + +/*** Global variables *********************************************************/ + +/*** Prototype of function ****************************************************/ + +#endif /* AKMD_INC_AKCOMMON_H */ + diff --git a/sensors/akmdfs/AKFS_Compass.h b/sensors/akmdfs/AKFS_Compass.h new file mode 100644 index 0000000..aa59285 --- /dev/null +++ b/sensors/akmdfs/AKFS_Compass.h @@ -0,0 +1,84 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_COMPASS_H +#define AKFS_INC_COMPASS_H + +#include "AKFS_Common.h" +#include "AKFS_CSpec.h" + +/****************************************/ +/* Include files for AK8975 library. */ +/****************************************/ +#include "AKFS_AK8975.h" +#include "AKFS_Configure.h" +#include "AKFS_AOC.h" +#include "AKFS_Device.h" +#include "AKFS_Direction.h" +#include "AKFS_Math.h" +#include "AKFS_VNorm.h" + +/*** Constant definition ******************************************************/ + +/*** Type declaration *********************************************************/ +typedef struct _AKSENSOR_DATA{ + AKFLOAT x; + AKFLOAT y; + AKFLOAT z; + int8 status; +} AKSENSOR_DATA; + +/*! A parameter structure. */ +typedef struct _AK8975PRMS{ + /* Variables for Decomp8975. */ + AKFVEC mfv_hdata[AKFS_HDATA_SIZE]; + uint8vec mi_asa; + uint8 mi_st; + + /* Variables forAOC. */ + AKFS_AOC_VAR m_aocv; + + /* Variables for Magnetometer buffer. */ + AKFVEC mfv_hvbuf[AKFS_HDATA_SIZE]; + AKFVEC mfv_ho; + AKFVEC mfv_hs; + AKFS_PATNO m_hpat; + + /* Variables for Accelerometer buffer. */ + AKFVEC mfv_adata[AKFS_ADATA_SIZE]; + AKFVEC mfv_avbuf[AKFS_ADATA_SIZE]; + AKFVEC mfv_ao; + AKFVEC mfv_as; + + /* Variables for Direction. */ + int16 mi_hnaveD; + int16 mi_anaveD; + AKFLOAT mf_azimuth; + AKFLOAT mf_pitch; + AKFLOAT mf_roll; + + /* Variables for vector output */ + int16 mi_hnaveV; + int16 mi_anaveV; + AKFVEC mfv_hvec; + AKFVEC mfv_avec; + int16 mi_hstatus; + +} AK8975PRMS; + +#endif + diff --git a/sensors/akmdfs/AKFS_Disp.c b/sensors/akmdfs/AKFS_Disp.c new file mode 100644 index 0000000..4e7c501 --- /dev/null +++ b/sensors/akmdfs/AKFS_Disp.c @@ -0,0 +1,89 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_Disp.h" +#include "AKFS_Common.h" + +/*! + Print startup message to Android Log daemon. + */ +void Disp_StartMessage(void) +{ + ALOGI("AK8975 Daemon for Open Source v20120329."); + ALOGI("Debug: %s", ((ENABLE_AKMDEBUG)?("ON"):("OFF"))); + ALOGI("Debug level: %d", DBG_LEVEL); +} + +/*! + Print ending message to Android Log daemon. + */ +void Disp_EndMessage(int ret) +{ + ALOGI("AK8975 for Android end (%d).", ret); +} + +/*! + Print result + */ +void Disp_Result(int buf[YPR_DATA_SIZE]) +{ + AKMDEBUG(DBG_LEVEL1, + "Flag=%d\n", buf[0]); + AKMDEBUG(DBG_LEVEL1, + "Acc(%d):%8.2f, %8.2f, %8.2f\n", + buf[4], REVERT_ACC(buf[1]), REVERT_ACC(buf[2]), REVERT_ACC(buf[3])); + AKMDEBUG(DBG_LEVEL1, + "Mag(%d):%8.2f, %8.2f, %8.2f\n", + buf[8], REVERT_MAG(buf[5]), REVERT_MAG(buf[6]), REVERT_MAG(buf[7])); + AKMDEBUG(DBG_LEVEL1, + "Ori(%d)=%8.2f, %8.2f, %8.2f\n", + buf[8], REVERT_ORI(buf[9]), REVERT_ORI(buf[10]), REVERT_ORI(buf[11])); +} + +/*! + Output main menu to stdout and wait for user input from stdin. + @return Selected mode. + */ +MODE Menu_Main(void) +{ + char msg[20]; + memset(msg, 0, sizeof(msg)); + + AKMDEBUG(DBG_LEVEL1, + " -------------------- AK8975 Console Application -------------------- \n" + " 1. Start measurement. \n" + " 2. Self-test. \n" + " Q. Quit application. \n" + " --------------------------------------------------------------------- \n" + " Please select a number.\n" + " ---> "); + fgets(msg, 10, stdin); + AKMDEBUG(DBG_LEVEL1, "\n"); + + /* BUG : If 2-digits number is input, */ + /* only the first character is compared. */ + if (!strncmp(msg, "1", 1)) { + return MODE_Measure; + } else if (!strncmp(msg, "2", 1)) { + return MODE_SelfTest; + } else if (strncmp(msg, "Q", 1) == 0 || strncmp(msg, "q", 1) == 0) { + return MODE_Quit; + } else { + return MODE_ERROR; + } +} + diff --git a/sensors/akmdfs/AKFS_Disp.h b/sensors/akmdfs/AKFS_Disp.h new file mode 100644 index 0000000..4769e3c --- /dev/null +++ b/sensors/akmdfs/AKFS_Disp.h @@ -0,0 +1,52 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_DISP_H +#define AKFS_INC_DISP_H + +/* Include file for AK8975 library. */ +#include "AKFS_Compass.h" + +/*** Constant definition ******************************************************/ +#define REVERT_ACC(a) ((float)((a) * 9.8f / 720.0f)) +#define REVERT_MAG(m) ((float)((m) * 0.06f)) +#define REVERT_ORI(o) ((float)((o) / 64.0f)) + +/*** Type declaration *********************************************************/ + +/*! These defined types represents the current mode. */ +typedef enum _MODE { + MODE_ERROR, /*!< Error */ + MODE_Measure, /*!< Measurement */ + MODE_SelfTest, /*!< Self-test */ + MODE_Quit /*!< Quit */ +} MODE; + +/*** Prototype of function ****************************************************/ +/* + Disp_ : Display messages. + Menu_ : Display menu (two or more selection) and wait for user input. + */ + +void Disp_StartMessage(void); +void Disp_EndMessage(int ret); +void Disp_Result(int buf[YPR_DATA_SIZE]); + +MODE Menu_Main(void); + +#endif + diff --git a/sensors/akmdfs/AKFS_FileIO.c b/sensors/akmdfs/AKFS_FileIO.c new file mode 100644 index 0000000..92c2ce9 --- /dev/null +++ b/sensors/akmdfs/AKFS_FileIO.c @@ -0,0 +1,130 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_FileIO.h" + +/*** Constant definition ******************************************************/ +#ifdef AKFS_PRECISION_DOUBLE +#define AKFS_SCANF_FORMAT "%63s = %lf" +#else +#define AKFS_SCANF_FORMAT "%63s = %f" +#endif +#define AKFS_PRINTF_FORMAT "%s = %f\n" +#define LOAD_BUF_SIZE 64 + +/*! + Load parameters from file which is specified with #path. This function reads + data from a beginning of the file line by line, and check parameter name + sequentially. In otherword, this function depends on the order of eache + parameter described in the file. + @return If function fails, the return value is #AKM_FAIL. When function fails, + the output is undefined. Therefore, parameters which are possibly overwritten + by this function should be initialized again. If function succeeds, the + return value is #AKM_SUCCESS. + @param[out] prms A pointer to #AK8975PRMS structure. Loaded parameter is + stored to the member of this structure. + @param[in] path A path to the setting file. + */ +int16 AKFS_LoadParameters(AK8975PRMS * prms, const char* path) +{ + int16 ret; + char buf[LOAD_BUF_SIZE]; + FILE *fp = NULL; + + /* Open setting file for read. */ + if ((fp = fopen(path, "r")) == NULL) { + AKMERROR_STR("fopen"); + return AKM_FAIL; + } + + ret = 1; + + /* Load data to HO */ + if (fscanf(fp, AKFS_SCANF_FORMAT, buf, &prms->mfv_ho.u.x) != 2) { + ret = 0; + } else { + if (strncmp(buf, "HO.x", sizeof(buf)) != 0) { + ret = 0; + } + } + if (fscanf(fp, AKFS_SCANF_FORMAT, buf, &prms->mfv_ho.u.y) != 2) { + ret = 0; + } else { + if (strncmp(buf, "HO.y", sizeof(buf)) != 0) { + ret = 0; + } + } + if (fscanf(fp, AKFS_SCANF_FORMAT, buf, &prms->mfv_ho.u.z) != 2) { + ret = 0; + } else { + if (strncmp(buf, "HO.z", sizeof(buf)) != 0) { + ret = 0; + } + } + + if (fclose(fp) != 0) { + AKMERROR_STR("fclose"); + ret = 0; + } + + if (ret == 0) { + AKMERROR; + return AKM_FAIL; + } + + return AKM_SUCCESS; +} + +/*! + Save parameters to file which is specified with #path. This function saves + variables when the offsets of magnetic sensor estimated successfully. + @return If function fails, the return value is #AKM_FAIL. When function fails, + the parameter file may collapsed. Therefore, the parameters file should be + discarded. If function succeeds, the return value is #AKM_SUCCESS. + @param[out] prms A pointer to #AK8975PRMS structure. Member variables are + saved to the parameter file. + @param[in] path A path to the setting file. + */ +int16 AKFS_SaveParameters(AK8975PRMS *prms, const char* path) +{ + int16 ret = 1; + FILE *fp; + + /*Open setting file for write. */ + if ((fp = fopen(path, "w")) == NULL) { + AKMERROR_STR("fopen"); + return AKM_FAIL; + } + + /* Save data to HO */ + if (fprintf(fp, AKFS_PRINTF_FORMAT, "HO.x", prms->mfv_ho.u.x) < 0) { ret = 0; } + if (fprintf(fp, AKFS_PRINTF_FORMAT, "HO.y", prms->mfv_ho.u.y) < 0) { ret = 0; } + if (fprintf(fp, AKFS_PRINTF_FORMAT, "HO.z", prms->mfv_ho.u.z) < 0) { ret = 0; } + + if (fclose(fp) != 0) { + AKMERROR_STR("fclose"); + ret = 0; + } + + if (ret == 0) { + AKMERROR; + return AKM_FAIL; + } + + return AKM_SUCCESS; +} + diff --git a/sensors/akmdfs/AKFS_FileIO.h b/sensors/akmdfs/AKFS_FileIO.h new file mode 100644 index 0000000..62f6e77 --- /dev/null +++ b/sensors/akmdfs/AKFS_FileIO.h @@ -0,0 +1,39 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_FILEIO_H +#define AKFS_INC_FILEIO_H + +/* Common include files. */ +#include "AKFS_Common.h" + +/* Include file for AK8975 library. */ +#include "AKFS_Compass.h" + +/*** Constant definition ******************************************************/ + +/*** Type declaration *********************************************************/ + +/*** Global variables *********************************************************/ + +/*** Prototype of function ****************************************************/ +int16 AKFS_LoadParameters(AK8975PRMS *prms, const char* path); + +int16 AKFS_SaveParameters(AK8975PRMS* prms, const char* path); + +#endif + diff --git a/sensors/akmdfs/AKFS_Measure.c b/sensors/akmdfs/AKFS_Measure.c new file mode 100644 index 0000000..84c0843 --- /dev/null +++ b/sensors/akmdfs/AKFS_Measure.c @@ -0,0 +1,410 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifdef WIN32 +#include "AK8975_LinuxDriver.h" +#else +#include "AK8975Driver.h" +#endif + +#include "AKFS_Measure.h" +#include "AKFS_Disp.h" +#include "AKFS_APIs.h" + +/*! + Read sensitivity adjustment data from fuse ROM. + @return If data are read successfully, the return value is #AKM_SUCCESS. + Otherwise the return value is #AKM_FAIL. + @param[out] regs The read ASA values. When this function succeeds, ASAX value + is saved in regs[0], ASAY is saved in regs[1], ASAZ is saved in regs[2]. + */ +int16 AKFS_ReadAK8975FUSEROM( + uint8 regs[3] +) +{ + /* Set to FUSE ROM access mode */ + if (AKD_SetMode(AK8975_MODE_FUSE_ACCESS) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* Read values. ASAX, ASAY, ASAZ */ + if (AKD_RxData(AK8975_FUSE_ASAX, regs, 3) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* Set to PowerDown mode */ + if (AKD_SetMode(AK8975_MODE_POWERDOWN) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + AKMDEBUG(DBG_LEVEL2, "%s: asa(dec)=%d,%d,%d\n", + __FUNCTION__, regs[0], regs[1], regs[2]); + + return AKM_SUCCESS; +} + +/*! + Carry out self-test. + @return If this function succeeds, the return value is #AKM_SUCCESS. + Otherwise the return value is #AKM_FAIL. + */ +int16 AKFS_SelfTest(void) +{ + BYTE i2cData[SENSOR_DATA_SIZE]; + BYTE asa[3]; + AKFLOAT hdata[3]; + int16 ret; + + /* Set to FUSE ROM access mode */ + if (AKD_SetMode(AK8975_MODE_FUSE_ACCESS) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* Read values from ASAX to ASAZ */ + if (AKD_RxData(AK8975_FUSE_ASAX, asa, 3) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* Set to PowerDown mode */ + if (AKD_SetMode(AK8975_MODE_POWERDOWN) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* Set to self-test mode */ + i2cData[0] = 0x40; + if (AKD_TxData(AK8975_REG_ASTC, i2cData, 1) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* Set to Self-test mode */ + if (AKD_SetMode(AK8975_MODE_SELF_TEST) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + /* + Wait for DRDY pin changes to HIGH. + Get measurement data from AK8975 + */ + if (AKD_GetMagneticData(i2cData) != AKD_SUCCESS) { + AKMERROR; + return AKM_FAIL; + } + + hdata[0] = AK8975_HDATA_CONVERTER(i2cData[2], i2cData[1], asa[0]); + hdata[1] = AK8975_HDATA_CONVERTER(i2cData[4], i2cData[3], asa[1]); + hdata[2] = AK8975_HDATA_CONVERTER(i2cData[6], i2cData[5], asa[2]); + + /* Test */ + ret = 1; + if ((hdata[0] < AK8975_SELFTEST_MIN_X) || + (AK8975_SELFTEST_MAX_X < hdata[0])) { + ret = 0; + } + if ((hdata[1] < AK8975_SELFTEST_MIN_Y) || + (AK8975_SELFTEST_MAX_Y < hdata[1])) { + ret = 0; + } + if ((hdata[2] < AK8975_SELFTEST_MIN_Z) || + (AK8975_SELFTEST_MAX_Z < hdata[2])) { + ret = 0; + } + + AKMDEBUG(DBG_LEVEL2, "Test(%s):%8.2f, %8.2f, %8.2f\n", + (ret ? "Success" : "fail"), hdata[0], hdata[1], hdata[2]); + + if (ret) { + return AKM_SUCCESS; + } else { + return AKM_FAIL; + } +} + +/*! + This function calculate the duration of sleep for maintaining + the loop keep the period. + This function calculates "minimum - (end - start)". + @return The result of above equation in nanosecond. + @param end The time of after execution. + @param start The time of before execution. + @param minimum Loop period of each execution. + */ +struct timespec AKFS_CalcSleep( + const struct timespec* end, + const struct timespec* start, + const int64_t minimum +) +{ + int64_t endL; + int64_t startL; + int64_t diff; + + struct timespec ret; + + endL = (end->tv_sec * 1000000000) + end->tv_nsec; + startL = (start->tv_sec * 1000000000) + start->tv_nsec; + diff = minimum; + + diff -= (endL - startL); + + /* Don't allow negative value */ + if (diff < 0) { + diff = 0; + } + + /* Convert to timespec */ + if (diff > 1000000000) { + ret.tv_sec = diff / 1000000000; + ret.tv_nsec = diff % 1000000000; + } else { + ret.tv_sec = 0; + ret.tv_nsec = diff; + } + return ret; +} + +/*! + Get interval of each sensors from device driver. + @return If this function succeeds, the return value is #AKM_SUCCESS. + Otherwise the return value is #AKM_FAIL. + @param flag This variable indicates what sensor frequency is updated. + @param minimum This value show the minimum loop period in all sensors. + */ +int16 AKFS_GetInterval( + uint16* flag, + int64_t* minimum +) +{ + /* Accelerometer, Magnetometer, Orientation */ + /* Delay is in nano second unit. */ + /* Negative value means the sensor is disabled.*/ + int64_t delay[AKM_NUM_SENSORS]; + int i; + + if (AKD_GetDelay(delay) < 0) { + AKMERROR; + return AKM_FAIL; + } + AKMDATA(AKMDATA_GETINTERVAL,"delay[A,M,O]=%lld,%lld,%lld\n", + delay[0], delay[1], delay[2]); + + /* update */ + *minimum = 1000000000; + *flag = 0; + for (i=0; i<AKM_NUM_SENSORS; i++) { + /* Set flag */ + if (delay[i] >= 0) { + *flag |= 1 << i; + if (*minimum > delay[i]) { + *minimum = delay[i]; + } + } + } + return AKM_SUCCESS; +} + +/*! + If this program run as console mode, measurement result will be displayed + on console terminal. + @return If this function succeeds, the return value is #AKM_SUCCESS. + Otherwise the return value is #AKM_FAIL. + */ +void AKFS_OutputResult( + const uint16 flag, + const AKSENSOR_DATA* acc, + const AKSENSOR_DATA* mag, + const AKSENSOR_DATA* ori +) +{ + int buf[YPR_DATA_SIZE]; + + /* Store to buffer */ + buf[0] = flag; /* Data flag */ + buf[1] = CONVERT_ACC(acc->x); /* Ax */ + buf[2] = CONVERT_ACC(acc->y); /* Ay */ + buf[3] = CONVERT_ACC(acc->z); /* Az */ + buf[4] = acc->status; /* Acc status */ + buf[5] = CONVERT_MAG(mag->x); /* Mx */ + buf[6] = CONVERT_MAG(mag->y); /* My */ + buf[7] = CONVERT_MAG(mag->z); /* Mz */ + buf[8] = mag->status; /* Mag status */ + buf[9] = CONVERT_ORI(ori->x); /* yaw */ + buf[10] = CONVERT_ORI(ori->y); /* pitch */ + buf[11] = CONVERT_ORI(ori->z); /* roll */ + + if (g_opmode & OPMODE_CONSOLE) { + /* Console mode */ + Disp_Result(buf); + } + + /* Set result to driver */ + AKD_SetYPR(buf); +} + +/*! + This is the main routine of measurement. + */ +void AKFS_MeasureLoop(void) +{ + BYTE i2cData[SENSOR_DATA_SIZE]; /* ST1 ~ ST2 */ + int16 mag[3]; + int16 mstat; + int16 acc[3]; + struct timespec tsstart= {0, 0}; + struct timespec tsend = {0, 0}; + struct timespec doze; + int64_t minimum; + uint16 flag; + AKSENSOR_DATA sv_acc; + AKSENSOR_DATA sv_mag; + AKSENSOR_DATA sv_ori; + AKFLOAT tmpx, tmpy, tmpz; + int16 tmp_accuracy; + + minimum = -1; + +#ifdef WIN32 + clock_init_time(); +#endif + + /* Initialize library functions and device */ + if (AKFS_Start(CSPEC_SETTING_FILE) != AKM_SUCCESS) { + AKMERROR; + goto MEASURE_END; + } + + while (g_stopRequest != AKM_TRUE) { + /* Beginning time */ + if (clock_gettime(CLOCK_MONOTONIC, &tsstart) < 0) { + AKMERROR; + goto MEASURE_END; + } + + /* Get interval */ + if (AKFS_GetInterval(&flag, &minimum) != AKM_SUCCESS) { + AKMERROR; + goto MEASURE_END; + } + + if ((flag & ACC_DATA_READY) || (flag & ORI_DATA_READY)) { + /* Get accelerometer */ + if (AKD_GetAccelerationData(acc) != AKD_SUCCESS) { + AKMERROR; + goto MEASURE_END; + } + + /* Calculate accelerometer vector */ + if (AKFS_Get_ACCELEROMETER(acc, 0, &tmpx, &tmpy, &tmpz, &tmp_accuracy) == AKM_SUCCESS) { + sv_acc.x = tmpx; + sv_acc.y = tmpy; + sv_acc.z = tmpz; + sv_acc.status = tmp_accuracy; + } else { + flag &= ~ACC_DATA_READY; + flag &= ~ORI_DATA_READY; + } + } + + if ((flag & MAG_DATA_READY) || (flag & ORI_DATA_READY)) { + /* Set to measurement mode */ + if (AKD_SetMode(AK8975_MODE_SNG_MEASURE) != AKD_SUCCESS) { + AKMERROR; + goto MEASURE_END; + } + + /* Wait for DRDY and get data from device */ + if (AKD_GetMagneticData(i2cData) != AKD_SUCCESS) { + AKMERROR; + goto MEASURE_END; + } + /* raw data to x,y,z value */ + mag[0] = (int)((int16_t)(i2cData[2]<<8)+((int16_t)i2cData[1])); + mag[1] = (int)((int16_t)(i2cData[4]<<8)+((int16_t)i2cData[3])); + mag[2] = (int)((int16_t)(i2cData[6]<<8)+((int16_t)i2cData[5])); + mstat = i2cData[0] | i2cData[7]; + + AKMDATA(AKMDATA_BDATA, + "bData=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n", + i2cData[0], i2cData[1], i2cData[2], i2cData[3], + i2cData[4], i2cData[5], i2cData[6], i2cData[7]); + + /* Calculate magnetic field vector */ + if (AKFS_Get_MAGNETIC_FIELD(mag, mstat, &tmpx, &tmpy, &tmpz, &tmp_accuracy) == AKM_SUCCESS) { + sv_mag.x = tmpx; + sv_mag.y = tmpy; + sv_mag.z = tmpz; + sv_mag.status = tmp_accuracy; + } else { + flag &= ~MAG_DATA_READY; + flag &= ~ORI_DATA_READY; + } + } + + if (flag & ORI_DATA_READY) { + if (AKFS_Get_ORIENTATION(&tmpx, &tmpy, &tmpz, &tmp_accuracy) == AKM_SUCCESS) { + sv_ori.x = tmpx; + sv_ori.y = tmpy; + sv_ori.z = tmpz; + sv_ori.status = tmp_accuracy; + } else { + flag &= ~ORI_DATA_READY; + } + } + + /* Output result */ + AKFS_OutputResult(flag, &sv_acc, &sv_mag, &sv_ori); + + /* Ending time */ + if (clock_gettime(CLOCK_MONOTONIC, &tsend) < 0) { + AKMERROR; + goto MEASURE_END; + } + + /* Calculate duration */ + doze = AKFS_CalcSleep(&tsend, &tsstart, minimum); + AKMDATA(AKMDATA_LOOP, "Sleep: %6.2f msec\n", (doze.tv_nsec/1000000.0f)); + nanosleep(&doze, NULL); + +#ifdef WIN32 + if (_kbhit()) { + _getch(); + break; + } +#endif + } + +MEASURE_END: + /* Set to PowerDown mode */ + if (AKD_SetMode(AK8975_MODE_POWERDOWN) != AKD_SUCCESS) { + AKMERROR; + return; + } + + /* Save parameters */ + if (AKFS_Stop(CSPEC_SETTING_FILE) != AKM_SUCCESS) { + AKMERROR; + } +} + + diff --git a/sensors/akmdfs/AKFS_Measure.h b/sensors/akmdfs/AKFS_Measure.h new file mode 100644 index 0000000..d156b95 --- /dev/null +++ b/sensors/akmdfs/AKFS_Measure.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#ifndef AKFS_INC_MEASURE_H +#define AKFS_INC_MEASURE_H + +/* Include files for AK8975 library. */ +#include "AKFS_Compass.h" + +/*** Constant definition ******************************************************/ +#define AK8975_SELFTEST_MIN_X -100 +#define AK8975_SELFTEST_MAX_X 100 + +#define AK8975_SELFTEST_MIN_Y -100 +#define AK8975_SELFTEST_MAX_Y 100 + +#define AK8975_SELFTEST_MIN_Z -1000 +#define AK8975_SELFTEST_MAX_Z -300 + +#define CONVERT_ACC(a) ((int)((a) * 720 / 9.8f)) +#define CONVERT_MAG(m) ((int)((m) / 0.06f)) +#define CONVERT_ORI(o) ((int)((o) * 64)) + +/*** Type declaration *********************************************************/ + +/*** Global variables *********************************************************/ + +/*** Prototype of function ****************************************************/ +int16 AKFS_ReadAK8975FUSEROM( + uint8 regs[3] +); + +int16 AKFS_SelfTest(void); + +struct timespec AKFS_CalcSleep( + const struct timespec* end, + const struct timespec* start, + const int64_t minimum +); + +int16 AKFS_GetInterval( + uint16* flag, + int64_t* minimum +); + +void AKFS_OutputResult( + const uint16 flag, + const AKSENSOR_DATA* acc, + const AKSENSOR_DATA* mag, + const AKSENSOR_DATA* ori +); + +void AKFS_MeasureLoop(void); + +#endif + diff --git a/sensors/akmdfs/NOTICE b/sensors/akmdfs/NOTICE new file mode 100644 index 0000000..d645695 --- /dev/null +++ b/sensors/akmdfs/NOTICE @@ -0,0 +1,202 @@ + + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/sensors/akmdfs/Version.txt b/sensors/akmdfs/Version.txt new file mode 100644 index 0000000..3d56b30 --- /dev/null +++ b/sensors/akmdfs/Version.txt @@ -0,0 +1,31 @@ +Version + * Console Version 20120329 + 570 AK8975Driver.c + 496 AK8975Driver.h + 579 AKFS_APIs.c + 572 AKFS_APIs.h + 580 AKFS_APIs_8975/AKFS_AK8975.c + 580 AKFS_APIs_8975/AKFS_AK8975.h + 580 AKFS_APIs_8975/AKFS_AOC.c + 580 AKFS_APIs_8975/AKFS_AOC.h + 580 AKFS_APIs_8975/AKFS_Configure.h + 580 AKFS_APIs_8975/AKFS_Device.c + 580 AKFS_APIs_8975/AKFS_Device.h + 580 AKFS_APIs_8975/AKFS_Direction.c + 580 AKFS_APIs_8975/AKFS_Direction.h + 580 AKFS_APIs_8975/AKFS_Math.h + 580 AKFS_APIs_8975/AKFS_VNorm.c + 580 AKFS_APIs_8975/AKFS_VNorm.h + 568 AKFS_CSpec.h + 573 AKFS_Common.h + 572 AKFS_Compass.h + 579 AKFS_Disp.c + 568 AKFS_Disp.h + 568 AKFS_FileIO.c + 549 AKFS_FileIO.h + 573 AKFS_Measure.c + 568 AKFS_Measure.h + 574 Android.mk + 575 NOTICE + 579 main.c + diff --git a/sensors/akmdfs/main.c b/sensors/akmdfs/main.c new file mode 100644 index 0000000..a3df0bc --- /dev/null +++ b/sensors/akmdfs/main.c @@ -0,0 +1,293 @@ +/****************************************************************************** + * + * Copyright (C) 2012 Asahi Kasei Microdevices Corporation, Japan + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include "AKFS_Common.h" +#include "AKFS_Compass.h" +#include "AKFS_Disp.h" +#include "AKFS_FileIO.h" +#include "AKFS_Measure.h" +#include "AKFS_APIs.h" + +#ifndef WIN32 +#include <sched.h> +#include <pthread.h> +#include <linux/input.h> +#endif + +#define ERROR_INITDEVICE (-1) +#define ERROR_OPTPARSE (-2) +#define ERROR_SELF_TEST (-3) +#define ERROR_READ_FUSE (-4) +#define ERROR_INIT (-5) +#define ERROR_GETOPEN_STAT (-6) +#define ERROR_STARTCLONE (-7) +#define ERROR_GETCLOSE_STAT (-8) + +/* Global variable. See AKFS_Common.h file. */ +int g_stopRequest = 0; +int g_opmode = 0; +int g_dbgzone = 0; +int g_mainQuit = AKD_FALSE; + +/* Static variable. */ +static pthread_t s_thread; /*!< Thread handle */ + +/*! + A thread function which is raised when measurement is started. + @param[in] args This parameter is not used currently. + */ +static void* thread_main(void* args) +{ + AKFS_MeasureLoop(); + return ((void*)0); +} + +/*! + Signal handler. This should be used only in DEBUG mode. + @param[in] sig Event + */ +static void signal_handler(int sig) +{ + if (sig == SIGINT) { + ALOGE("SIGINT signal"); + g_stopRequest = 1; + g_mainQuit = AKD_TRUE; + } +} + +/*! + Starts new thread. + @return If this function succeeds, the return value is 1. Otherwise, + the return value is 0. + */ +static int startClone(void) +{ + pthread_attr_t attr; + + pthread_attr_init(&attr); + g_stopRequest = 0; + if (pthread_create(&s_thread, &attr, thread_main, NULL) == 0) { + return 1; + } else { + return 0; + } +} + +/*! + This function parse the option. + @retval 1 Parse succeeds. + @retval 0 Parse failed. + @param[in] argc Argument count + @param[in] argv Argument vector + @param[out] layout_patno + */ +int OptParse( + int argc, + char* argv[], + AKFS_PATNO* layout_patno) +{ +#ifdef WIN32 + /* Static */ +#if defined(AKFS_WIN32_PAT1) + *layout_patno = PAT1; +#elif defined(AKFS_WIN32_PAT2) + *layout_patno = PAT2; +#elif defined(AKFS_WIN32_PAT3) + *layout_patno = PAT3; +#elif defined(AKFS_WIN32_PAT4) + *layout_patno = PAT4; +#elif defined(AKFS_WIN32_PAT5) + *layout_patno = PAT5; +#else + *layout_patno = PAT1; +#endif + g_opmode = OPMODE_CONSOLE; + /*g_opmode = 0;*/ + g_dbgzone = AKMDATA_LOOP | AKMDATA_TEST; +#else + int opt; + char optVal; + + *layout_patno = PAT_INVALID; + + while ((opt = getopt(argc, argv, "sm:z:")) != -1) { + switch(opt){ + case 'm': + optVal = (char)(optarg[0] - '0'); + if ((PAT1 <= optVal) && (optVal <= PAT8)) { + *layout_patno = (AKFS_PATNO)optVal; + AKMDEBUG(DBG_LEVEL2, "%s: Layout=%d\n", __FUNCTION__, optVal); + } + break; + case 's': + g_opmode |= OPMODE_CONSOLE; + break; + case 'z': + /* If error detected, hopefully 0 is returned. */ + errno = 0; + g_dbgzone = (int)strtol(optarg, (char**)NULL, 0); + AKMDEBUG(DBG_LEVEL2, "%s: Dbg Zone=%d\n", __FUNCTION__, g_dbgzone); + break; + default: + ALOGE("%s: Invalid argument", argv[0]); + return 0; + } + } + + /* If layout is not specified with argument, get parameter from driver */ + if (*layout_patno == PAT_INVALID) { + int16_t n; + if (AKD_GetLayout(&n) == AKM_SUCCESS) { + if ((PAT1 <= n) && (n <= PAT8)) { + *layout_patno = (AKFS_PATNO)n; + } + } + } + /* Error */ + if (*layout_patno == PAT_INVALID) { + ALOGE("No layout is specified."); + return 0; + } +#endif + + return 1; +} + +void ConsoleMode(void) +{ + /*** Console Mode *********************************************/ + while (AKD_TRUE) { + /* Select operation */ + switch (Menu_Main()) { + case MODE_SelfTest: + AKFS_SelfTest(); + break; + case MODE_Measure: + /* Reset flag */ + g_stopRequest = 0; + /* Measurement routine */ + AKFS_MeasureLoop(); + break; + + case MODE_Quit: + return; + + default: + AKMDEBUG(DBG_LEVEL0, "Unknown operation mode.\n"); + break; + } + } +} + +int main(int argc, char **argv) +{ + int retValue = 0; + AKFS_PATNO pat; + uint8 regs[3]; + + /* Show the version info of this software. */ + Disp_StartMessage(); + +#if ENABLE_AKMDEBUG + /* Register signal handler */ + signal(SIGINT, signal_handler); +#endif + + /* Open device driver */ + if(AKD_InitDevice() != AKD_SUCCESS) { + retValue = ERROR_INITDEVICE; + goto MAIN_QUIT; + } + + /* Parse command-line options */ + /* This function calls device driver function to get layout */ + if (OptParse(argc, argv, &pat) == 0) { + retValue = ERROR_OPTPARSE; + goto MAIN_QUIT; + } + + /* Self Test */ + if (g_opmode & OPMODE_FST){ + if (AKFS_SelfTest() != AKD_SUCCESS) { + retValue = ERROR_SELF_TEST; + goto MAIN_QUIT; + } + } + + /* OK, then start */ + if (AKFS_ReadAK8975FUSEROM(regs) != AKM_SUCCESS) { + retValue = ERROR_READ_FUSE; + goto MAIN_QUIT; + } + + /* Initialize library. */ + if (AKFS_Init(pat, regs) != AKM_SUCCESS) { + retValue = ERROR_INIT; + goto MAIN_QUIT; + } + + /* Start console mode */ + if (g_opmode & OPMODE_CONSOLE) { + ConsoleMode(); + goto MAIN_QUIT; + } + + /*** Start Daemon ********************************************/ + while (g_mainQuit == AKD_FALSE) { + int st = 0; + /* Wait until device driver is opened. */ + if (AKD_GetOpenStatus(&st) != AKD_SUCCESS) { + retValue = ERROR_GETOPEN_STAT; + goto MAIN_QUIT; + } + if (st == 0) { + ALOGI("Suspended."); + } else { + ALOGI("Compass Opened."); + /* Reset flag */ + g_stopRequest = 0; + /* Start measurement thread. */ + if (startClone() == 0) { + retValue = ERROR_STARTCLONE; + goto MAIN_QUIT; + } + + /* Wait until device driver is closed. */ + if (AKD_GetCloseStatus(&st) != AKD_SUCCESS) { + retValue = ERROR_GETCLOSE_STAT; + g_mainQuit = AKD_TRUE; + } + /* Wait thread completion. */ + g_stopRequest = 1; + pthread_join(s_thread, NULL); + ALOGI("Compass Closed."); + } + } + +MAIN_QUIT: + + /* Release library */ + AKFS_Release(); + /* Close device driver. */ + AKD_DeinitDevice(); + /* Show the last message. */ + Disp_EndMessage(retValue); + + return retValue; +} + + |