Merge branch 'cm-13.0' of github.com:tilaksidduram/android_device_samsung_n7100 into HEAD

Change-Id: I492f715515d6cf681a5f6d2bc59f6929f92b7b47

11 files changed, 352 insertions, 110 deletions

diff --git a/overlay/frameworks/base/Keyguard/res/values/config.xml b/overlay/frameworks/base/Keyguard/res/values/config.xml
new file mode 100644
index 0000000..cf956e1
--- /dev/null
+++ b/overlay/frameworks/base/Keyguard/res/values/config.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <!-- Disable Lockscreen Notifications dynamic width by default -->
+    <bool name="config_lnDynamicWidth">true</bool>
+
+    <!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
+    <bool name="config_disableMenuKeyInLockScreen">true</bool>
+
+</resources>
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index c5403cc..63c00c1 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -20,6 +20,119 @@
 <!-- These resources are around just to allow their values to be customized
      for different hardware and product builds.  Do not translate. -->
 <resources>
+    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
+         autodetected from the Configuration. -->
+    <bool name="config_showNavigationBar">false</bool>
+
+    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
+        The N entries of this array define N + 1 zones as follows:
+
+        Zone 0: 0 <= LUX < array[0]
+        Zone 1: array[0] <= LUX < array[1]
+        ...
+        Zone N: array[N - 1] <= LUX < array[N]
+        Zone N + 1: array[N] <= LUX < infinity
+
+        Must be overridden in platform specific overlays
+    -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>150</item>
+        <item>300</item>
+        <item>600</item>
+        <item>1000</item>
+        <item>3000</item>
+        <item>8000</item>
+        <item>15000</item>
+        <item>28000</item>
+        <item>41000</item>
+        <item>54000</item>
+        <item>67000</item>
+        <item>80000</item>
+        <item>100000</item>
+        <item>150000</item>
+        <item>200000</item>
+    </integer-array>
+
+    <!-- Array of output values for LCD backlight corresponding to the LUX values
+        in the config_autoBrightnessLevels array. This array should have size one greater
+        than the size of the config_autoBrightnessLevels array.
+    -->
+    <integer-array name="config_autoBrightnessLcdBacklightValues">
+        <item>20</item>
+        <item>30</item>
+        <item>40</item>
+        <item>50</item>
+        <item>60</item>
+        <item>70</item>
+        <item>80</item>
+        <item>100</item>
+        <item>120</item>
+        <item>140</item>
+        <item>160</item>
+        <item>180</item>
+        <item>200</item>
+        <item>220</item>
+        <item>240</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- Array of output values for button backlight corresponding to the LUX values
+        in the config_autoBrightnessLevels array. This array should have size one greater
+        than the size of the config_autoBrightnessLevels array.
+    -->
+    <integer-array name="config_autoBrightnessButtonBacklightValues">
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+    </integer-array>
+
+    <!-- Array of output values for keyboard backlight corresponding to the LUX values
+        in the config_autoBrightnessLevels array. This array should have size one greater
+        than the size of the config_autoBrightnessLevels array.
+        n7100 has no keyboard so all values are zero.
+    -->
+    <integer-array name="config_autoBrightnessKeyboardBacklightValues">
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+    </integer-array>
+
     <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
          Please don't copy them, copy anything else. -->
 
@@ -80,18 +193,27 @@
     <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
     <bool name="config_intrusiveNotificationLed">true</bool>
 
+    <!-- Does the notification LED support multiple colors? Used to decide if the user can change the colors -->
+    <bool name="config_multiColorNotificationLed">true</bool>
+
     <!-- Is the battery LED intrusive? Used to decide if there should be a disable option -->
     <bool name="config_intrusiveBatteryLed">true</bool>
 
     <!-- Does the battery LED support multiple colors? Used to decide if the user can change the colors -->
     <bool name="config_multiColorBatteryLed">true</bool>
 
+    <!-- Default color for notification LED is white. -->
+    <color name="config_defaultNotificationColor">#ffffffff</color>
+
     <!-- Default LED on time for notification LED in milliseconds. -->
     <integer name="config_defaultNotificationLedOn">1000</integer>
 
     <!-- Default LED off time for notification LED in milliseconds. -->
     <integer name="config_defaultNotificationLedOff">9000</integer>
 
+    <!-- Workaround for devices with broken keyboards
+    <bool name="config_forceDisableHardwareKeyboard">true</bool> -->
+
     <!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
     <bool name="config_disableMenuKeyInLockScreen">true</bool>
 
@@ -106,7 +228,7 @@
             32 - Camera
             64 - Volume rocker
          For example, a device with Home, Back and Menu keys would set this
-         config to 7.  -->
+         config to 7. -->
     <integer name="config_deviceHardwareKeys">71</integer>
 
     <!-- Hardware keys present on the device with the ability to wake, stored as a bit field.
@@ -123,15 +245,88 @@
          config to 7. -->
     <integer name="config_deviceHardwareWakeKeys">65</integer>
 
-    <!-- Workaround for devices with broken keyboards -->
-    <bool name="config_forceDisableHardwareKeyboard">true</bool>
+    <!-- Control the behavior when the user long presses the home button.
+            0 - Nothing
+            1 - Menu key
+            2 - Recent apps view in SystemUI
+            3 - Launch assist intent
+            4 - Voice Search
+            5 - In-app Search
+         This needs to match the constants in
+         policy/src/com/android/internal/policy/impl/PhoneWindowManager.java -->
+    <integer name="config_longPressOnHomeBehavior">3</integer>
+
+    <integer name="config_longPressOnMenuBehavior">2</integer>
+
+    <!-- Control the behavior when the user double-taps the home button.
+            0 - Nothing
+            1 - Menu
+            2 - Recent apps view in SystemUI
+            3 - Launch assist intent
+            4 - Voice Search
+            5 - In-app Search
+         This needs to match the constants in
+         policy/src/com/android/internal/policy/impl/PhoneWindowManager.java -->
+    <integer name="config_doubleTapOnHomeBehavior">0</integer>
 
     <!-- Boolean to enable stk functionality on Samsung phones -->
     <bool name="config_samsung_stk">true</bool>
 
-    <!-- Boolean to enable stylus gestures  -->
-    <!-- <bool name="config_stylusGestures">true</bool> -->
+    <!-- Boolean to enable stylus gestures -->
+    <bool name="config_stylusGestures">true</bool>
+
+    <!-- Doze mode -->
+    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+    <integer name="config_screenBrightnessDoze">20</integer>
+    <bool name="config_dozeAfterScreenOff">true</bool>
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Maximum number of supported users -->
+    <integer name="config_multiuserMaximumUsers">4</integer>
+
+    <!-- Whether UI for multi user should be shown -->
+    <bool name="config_enableMultiUserUI">true</bool>
+
+    <!-- Whether WiFi display is supported by this device.
+         There are many prerequisites for this feature to work correctly.
+         Here are a few of them:
+         * The WiFi radio must support WiFi P2P.
+         * The WiFi radio must support concurrent connections to the WiFi display and
+           to an access point.
+         * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix"
+           remote submix module.  This module is used to record and stream system
+           audio output to the WiFi display encoder in the media server.
+         * The remote submix module "audio.r_submix.default" must be installed on the device.
+         * The device must be provisioned with HDCP keys (for protected content).
+    -->
+    <bool name="config_enableWifiDisplay">true</bool>
+
+    <!-- Specifies whether the dreams feature should be supported.
+         When true, the system will allow the user to configure dreams (screensavers)
+         to launch when a user activity timeout occurs or the system is told to nap.
+         When false, the dreams feature will be disabled (this does not affect dozing).
+         Consider setting this resource to false or disabling dreams by default when a
+         doze component is specified below since dreaming will supercede dozing and
+         will prevent the system from entering a low power state until the dream ends. -->
+    <bool name="config_dreamsSupported">true</bool>
+
+    <!-- If supported, are dreams enabled? (by default) -->
+    <bool name="config_dreamsEnabledByDefault">false</bool>
+
+    <!-- Enable doze powersaving
+    <bool name="config_enableAutoPowerModes">true</bool> -->
+
+    <!-- The RadioAccessFamilies supported by the device.
+         Empty is viewed as "all".  Only used on devices which
+         don't support RIL_REQUEST_GET_RADIO_CAPABILITY
+         format is UMTS|LTE|...
+    -->
+    <string translatable="false" name="config_radio_access_family">GPRS|EDGE|WCDMA</string>
+
+    <!-- Hardware keys on/off option -->
+    <bool name="config_hwKeysPref">true</bool>
 
-    <!-- Workaround for devices with broken keyboards -->
-    <bool name="config_forceDisableHardwareKeyboard">true</bool>
+    <!-- Older rotation sensors are not setting event.timestamp correctly. Setting to
+         true will use SystemClock.elapsedRealtimeNanos() to set timestamp. -->
+    <bool name="config_useSystemClockforRotationSensor">true</bool>
 </resources>
diff --git a/overlay/frameworks/base/core/res/res/values/pa_config.xml b/overlay/frameworks/base/core/res/res/values/pa_config.xml
new file mode 100644
index 0000000..63eba10
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/pa_config.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright (C) 2014 ParanoidAndroid Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Camera flash
+    <bool name="config_device_has_camera_flash">true</bool> -->
+</resources>
diff --git a/overlay/frameworks/base/core/res/res/xml/storage_list.xml b/overlay/frameworks/base/core/res/res/xml/storage_list.xml
deleted file mode 100644
index f98fbb0..0000000
--- a/overlay/frameworks/base/core/res/res/xml/storage_list.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-**
-** Copyright 2011, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License")
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- The <device> element should contain one or more <storage> elements.
-     Exactly one of these should have the attribute primary="true".
-     This storage will be the primary external storage and should have mountPoint="/mnt/sdcard".
-     Each storage should have both a mountPoint and storageDescription attribute.
-     The following attributes are optional:
-
-        primary:    (boolean) this storage is the primary external storage
-        removable:  (boolean) this is removable storage (for example, a real SD card)
-        emulated:   (boolean) the storage is emulated via the FUSE sdcard daemon
-        mtpReserve: (integer) number of megabytes of storage MTP should reserve for free storage
-                     (used for emulated storage that is shared with system's data partition)
-
-      A storage should not have both emulated and removable set to true
--->
-
-<StorageList xmlns:android="http://schemas.android.com/apk/res/android">
-    <storage android:mountPoint="/storage/sdcard0"
-             android:storageDescription="@string/storage_internal"
-             android:primary="true"
-             android:emulated="true"
-             android:mtpReserve="100" />
-
-   <storage android:mountPoint="/storage/sdcard1"
-             android:storageDescription="@string/storage_sd_card"
-             android:primary="false"
-             android:removable="true"
-             android:allowMassStorage="true" />
-
-   <storage android:mountPoint="/storage/usbdisk0"
-             android:storageDescription="@string/storage_usb"
-             android:primary="false"
-             android:removable="true" />
-</StorageList>
\ No newline at end of file
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
index 88851f7..49b1c81 100644
--- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -22,5 +22,11 @@
 <resources>
     <!-- Control whether status bar should distinguish HSPA data icon form UMTS data icon on devices -->
     <bool name="config_hspa_data_distinguishable">true</bool>
+
+    <!-- Doze: does this device support STATE_DOZE and STATE_DOZE_SUSPEND?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- Doze: should the pickup sensor be used as a pulse signal? -->
+    <bool name="doze_pulse_on_pick_up">true</bool>
 </resources>
 
diff --git a/overlay/packages/services/Telephony/res/values/config.xml b/overlay/packages/apps/Camera2/res/values/config.xml
index 230794e..b98eb58 100644
--- a/overlay/packages/services/Telephony/res/values/config.xml
+++ b/overlay/packages/apps/Camera2/res/values/config.xml
@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2009 The Android Open Source Project
+<!-- Copyright (C) 2012 The Android Open Source Project
 
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
@@ -14,9 +14,9 @@
      limitations under the License.
 -->
 
-<!-- Phone app resources that may need to be customized
+<!-- Camera app resources that may need to be customized
      for different hardware or product builds. -->
 <resources>
-    <!-- Determines if device implements a noise suppression device for in call audio-->
-    <bool name="has_in_call_noise_suppression">true</bool>
+    <!-- Use ZSL mode for Qualcomm cameras -->
+    <bool name="enableZSL">true</bool>
 </resources>
diff --git a/overlay/packages/apps/Dialer/res/values/config.xml b/overlay/packages/apps/Dialer/res/values/config.xml
new file mode 100644
index 0000000..b1c5a94
--- /dev/null
+++ b/overlay/packages/apps/Dialer/res/values/config.xml
@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+     Copyright (C) 2014 The CyanogenMod Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources>
+    <integer name="call_recording_audio_source">4</integer>
+</resources>
diff --git a/overlay/packages/apps/Lightbulb/res/values/config.xml b/overlay/packages/apps/Lightbulb/res/values/config.xml
new file mode 100644
index 0000000..1315b79
--- /dev/null
+++ b/overlay/packages/apps/Lightbulb/res/values/config.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    Copyright (C) 2014 ParanoidAndroid Project
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+-->
+<resources>
+    <!-- Camera flash (App) -->
+    <bool name="camera_has_flash">true</bool>
+</resources>
diff --git a/overlay/packages/apps/Settings/res/values/bools.xml b/overlay/packages/apps/Settings/res/values/bools.xml
new file mode 100644
index 0000000..88338eb
--- /dev/null
+++ b/overlay/packages/apps/Settings/res/values/bools.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2012 The CyanogenMod Project <http://www.cyanogenmod.org>
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources xmlns:xliff="urnasis:names:tc:xliff:document:1.2 ">
+    <!-- Whether or not the dock settings are to be displayed for this device when docked -->
+    <bool name="has_dock_settings">true</bool>
+</resources>
diff --git a/overlay/packages/apps/Settings/res/values/config.xml b/overlay/packages/apps/Settings/res/values/config.xml
new file mode 100644
index 0000000..f10ae89
--- /dev/null
+++ b/overlay/packages/apps/Settings/res/values/config.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2012 The CyanogenMod Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources xmlns:xliff="urnasis:names:tc:xliff:document:1.2 ">
+    <!-- Home button wake support -->
+    <bool name="config_show_homeWake">true</bool>
+
+    <!-- Volume Rocker Wake Support. Some devices do not support (PMU) this.
+         Setting to false will disable Volume Rocker Wake support -->
+    <bool name="config_show_volumeRockerWake">true</bool>
+
+    <!-- Whether device has hardware buttons
+    <bool name="config_has_hardware_buttons">true</bool> -->
+
+    <!-- Button settings enabled or disabled
+    <bool name="config_device_has_button_settings" translatable="false">true</bool> -->
+</resources>
diff --git a/overlay/packages/apps/Torch/res/values/config.xml b/overlay/packages/apps/Torch/res/values/config.xml
deleted file mode 100644
index 98c882b..0000000
--- a/overlay/packages/apps/Torch/res/values/config.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     Copyright (C) 2013 The CyanogenMod Project
-
-     This program is free software; you can redistribute it and/or
-     modify it under the terms of the GNU General Public License
-     version 3 as published by the Free Software Foundation.
-
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-     GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-     MA  02110-1301, USA.
--->
-
-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds. -->
-<resources>
-    <!-- If there is no sysfs-based control mechanism, enable this -->
-    <bool name="useCameraInterface">false</bool>
-
-    <!-- Full path to the sysfs toggle -->
-    <string name="flashDevice">/sys/class/camera/flash/rear_flash</string>
-    <!-- Full path to the sysfs luminosity -->
-    <string name="flashDeviceLuminosity">/sys/class/camera/flash/rear_flash</string>
-    <!-- Full path to the 2nd sysfs luminosity, leave empty if doesn't exist -->
-    <string name="flashDeviceLuminosity2"></string>
-
-    <!-- Off setting -->
-    <integer name="valueOff">0</integer>
-    <!-- On setting -->
-    <integer name="valueOn">1</integer>
-
-    <!-- Low setting -->
-    <integer name="valueLow">32</integer>
-    <!-- Middle setting -->
-    <integer name="valueHigh">128</integer>
-    <!-- Highest setting, leave -1 if it doesn't exist -->
-    <integer name="valueDeathRay">-1</integer>
-
-    <!-- If the device supports high brightness mode, enable this -->
-    <bool name="hasHighBrightness">false</bool>
-</resources>